coreboot-4.0-5054-gf584218 Sat Dec 21 00:20:56 EST 2013 booting...
Enumerating buses...
Mainboard E350M1 Enable.
setup_bsp_ramtop, TOP MEM: msr.lo = 0xe0000000, msr.hi = 0x00000000
setup_bsp_ramtop, TOP MEM2: msr.lo = 0x1f000000, msr.hi = 0x00000002
setup_uma_memory: uma size 0x18000000, memory start 0xc8000000
PCI: Static device PCI: 00:04.0 not found, disabling it.
sm_init().
PCI: Static device PCI: 00:14.1 not found, disabling it.
done
Allocating resources...
Reading resources...
APIC: 00 missing read_resources
APIC: 01 missing read_resources
I2C: 00:50 missing read_resources
I2C: 00:51 missing read_resources
Done reading resources.
Setting resources...
Done setting resources.
Done allocating resources.
Enabling resources...
done.
Initializing devices...
Initializing CPU #0
Enabling cache
Setting up local apic...done.
CPU #0 initialized
Initializing CPU #1
Waiting for 1 CPUS to stop
Enabling cache
Setting up local apic...done.
CPU #1 initialized
Devices initialized
Finalize devices...
Devices finalized
Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done.
Writing IRQ routing tables to 0xc7fd0600...write_pirq_routing_table done.
ACPI: Writing ACPI tables at c7fd2600...
ACPI: done.
Root Device (ASROCK E350M1)
CPU_CLUSTER: 0 (AMD Family 14h Root Complex)
APIC: 00 (AMD CPU Family 14h)
DOMAIN: 0000 (AMD Family 14h Root Complex)
PCI: 00:00.0 (AMD Family 14h Northbridge)
PCI: 00:01.0 (AMD Family 14h Northbridge)
PCI: 00:01.1 (AMD Family 14h Northbridge)
PCI: 00:04.0 (AMD Family 14h Northbridge)
PCI: 00:05.0 (AMD Family 14h Northbridge)
PCI: 00:06.0 (AMD Family 14h Northbridge)
PCI: 00:07.0 (AMD Family 14h Northbridge)
PCI: 00:08.0 (AMD Family 14h Northbridge)
PCI: 00:11.0 (ATI SB800)
PCI: 00:12.0 (ATI SB800)
PCI: 00:12.2 (ATI SB800)
PCI: 00:13.0 (ATI SB800)
PCI: 00:13.2 (ATI SB800)
PCI: 00:14.0 (ATI SB800)
I2C: 00:50 (unknown)
I2C: 00:51 (unknown)
PCI: 00:14.1 (ATI SB800)
PCI: 00:14.2 (ATI SB800)
PCI: 00:14.3 (ATI SB800)
PNP: 002e.0 (Winbond W83627HF Super I/O)
PNP: 002e.1 (Winbond W83627HF Super I/O)
PNP: 002e.2 (Winbond W83627HF Super I/O)
PNP: 002e.3 (Winbond W83627HF Super I/O)
PNP: 002e.5 (Winbond W83627HF Super I/O)
PNP: 002e.6 (Winbond W83627HF Super I/O)
PNP: 002e.7 (Winbond W83627HF Super I/O)
PNP: 002e.8 (Winbond W83627HF Super I/O)
PNP: 002e.9 (Winbond W83627HF Super I/O)
PNP: 002e.a (Winbond W83627HF Super I/O)
PNP: 002e.b (Winbond W83627HF Super I/O)
PCI: 00:14.4 (ATI SB800)
PCI: 00:14.5 (ATI SB800)
PCI: 00:15.0 (ATI SB800)
PCI: 00:15.1 (ATI SB800)
PCI: 00:15.2 (ATI SB800)
PCI: 00:15.3 (ATI SB800)
PCI: 00:16.0 (ATI SB800)
PCI: 00:16.2 (ATI SB800)
PCI: 00:18.0 (AMD Family 14h Northbridge)
PCI: 00:18.1 (AMD Family 14h Northbridge)
PCI: 00:18.2 (AMD Family 14h Northbridge)
PCI: 00:18.3 (AMD Family 14h Northbridge)
PCI: 00:18.4 (AMD Family 14h Northbridge)
PCI: 00:18.5 (AMD Family 14h Northbridge)
PCI: 00:18.6 (AMD Family 14h Northbridge)
PCI: 00:18.7 (AMD Family 14h Northbridge)
APIC: 01 (unknown)
PCI: 04:00.0 (unknown)
Multiboot Information structure has been written.
----- [ seabios log starts here ] -----
Found coreboot cbmem console @ c7fc0400
Found mainboard ASROCK E350M1
Relocating init from 0x000e8379 to 0xc7fa61e0 (size 40276)
Found CBFS header at 0xfffffb90
CPU Mhz=1601
Found 24 PCI devices (max PCI bus is 04)
Copying PIR from 0xc7fd0600 to 0x000f20a0
Copying MPTABLE from 0xc7fd1600/c7fd1610 to 0x000f1f70
Copying ACPI RSDP from 0xc7fd2600 to 0x000f1f50
Copying SMBIOS entry point from 0xc7fdda00 to 0x000f1f30
Using pmtimer, ioport 0x808
EHCI init on dev 00:12.2 (regs=0xf014b420)
EHCI init on dev 00:13.2 (regs=0xf014b520)
OHCI init on dev 00:14.5 (regs=0xf014a000)
Found 0 lpt ports
Found 1 serial ports
AHCI controller at 11.0, iobase f014b000, irq 0
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
AHCI/0: registering: "AHCI/0: OCZ-VERTEX ATA-8 Hard-Disk (30533 MiBytes)"
Got ps2 nak (status=51)
Scan for VGA option rom
OHCI init on dev 00:12.0 (regs=0xf0148000)
Running option rom at c000:0003
Turning on vga text mode console
SeaBIOS (version rel-1.7.3-134-g9f922a2-20131220_234407-morn.localdomain)
Scan for option roms

Press F12 for boot menu.

USB keyboard initialized
All threads complete.
Searching bootorder for: HALT
drive 0x000f1ec0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=62533296
Space available for UMB: ce800-ee800, f0000-f1ec0
Returned 57344 bytes of ZoneHigh
e820 map has 7 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000c7fbe000 = 1 RAM
  4: 00000000c7fbe000 - 00000000e0000000 = 2 RESERVED
  5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
  6: 0000000100000000 - 000000021f000000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00