msi/ms7135/4.1-830-g1fec04b/2015-10-24T08:56:02Z
diff --git a/msi/ms7135/4.1-830-g1fec04b/2015-10-24T08:56:02Z/kernel_log.txt b/msi/ms7135/4.1-830-g1fec04b/2015-10-24T08:56:02Z/kernel_log.txt
new file mode 100644
index 0000000..dcdabd0
--- /dev/null
+++ b/msi/ms7135/4.1-830-g1fec04b/2015-10-24T08:56:02Z/kernel_log.txt
@@ -0,0 +1,581 @@
+[    0.000000] Initializing cgroup subsys cpuset
+[    0.000000] Initializing cgroup subsys cpu
+[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.68-1+deb7u5
+[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0
+[    0.000000] BIOS-provided physical RAM map:
+[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
+[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
+[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
+[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ff9f000 (usable)
+[    0.000000]  BIOS-e820: 000000007ff9f000 - 0000000080000000 (reserved)
+[    0.000000] NX (Execute Disable) protection: active
+[    0.000000] SMBIOS 2.7 present.
+[    0.000000] DMI: MSI MS-7135/MS-7135, BIOS jakllsch 09/22/2015
+[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
+[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
+[    0.000000] No AGP bridge found
+[    0.000000] last_pfn = 0x7ff9f max_arch_pfn = 0x400000000
+[    0.000000] MTRR default type: uncachable
+[    0.000000] MTRR fixed ranges enabled:
+[    0.000000]   00000-9FFFF write-back
+[    0.000000]   A0000-BFFFF uncachable
+[    0.000000]   C0000-FFFFF write-back
+[    0.000000] MTRR variable ranges enabled:
+[    0.000000]   0 base 0000000000 mask FF80000000 write-back
+[    0.000000]   1 base 00C0000000 mask FFF0000000 write-combining
+[    0.000000]   2 disabled
+[    0.000000]   3 disabled
+[    0.000000]   4 disabled
+[    0.000000]   5 disabled
+[    0.000000]   6 disabled
+[    0.000000]   7 disabled
+[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+[    0.000000] found SMP MP-table at [ffff8800000f63f0] f63f0
+[    0.000000] initial memory mapped : 0 - 20000000
+[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
+[    0.000000] init_memory_mapping: 0000000000000000-000000007ff9f000
+[    0.000000]  0000000000 - 007fe00000 page 2M
+[    0.000000]  007fe00000 - 007ff9f000 page 4k
+[    0.000000] kernel direct mapping tables up to 7ff9f000 @ 1fffc000-20000000
+[    0.000000] RAMDISK: 36a56000 - 37523000
+[    0.000000] ACPI: RSDP 00000000000f65f0 00024 (v02 CORE  )
+[    0.000000] ACPI: XSDT 000000007ffb80e0 00064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: FACP 000000007ffb9960 00074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: DSDT 000000007ffb8280 016DB (v01 CORE   CB-DSDT  00000001 INTL 20150619)
+[    0.000000] ACPI: FACS 000000007ffb8240 00040
+[    0.000000] ACPI: SSDT 000000007ffb9a60 00166 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
+[    0.000000] ACPI: MCFG 000000007ffb9bd0 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: TCPA 000000007ffb9c10 00032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: APIC 000000007ffb9c50 00050 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: SRAT 000000007ffb9ca0 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: SLIT 000000007ffb9d30 0002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: HPET 000000007ffb9d60 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: Local APIC address 0xfee00000
+[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
+[    0.000000] SRAT: Node 0 PXM 0 0-a0000
+[    0.000000] SRAT: Node 0 PXM 0 100000-80000000
+[    0.000000] NUMA: Initialized distance table, cnt=1
+[    0.000000] NUMA: Node 0 [0,a0000) + [100000,7ff9f000) -> [0,7ff9f000)
+[    0.000000] Initmem setup node 0 0000000000000000-000000007ff9f000
+[    0.000000]   NODE_DATA [000000007ff99000 - 000000007ff9dfff]
+[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
+[    0.000000] Zone PFN ranges:
+[    0.000000]   DMA      0x00000010 -> 0x00001000
+[    0.000000]   DMA32    0x00001000 -> 0x00100000
+[    0.000000]   Normal   empty
+[    0.000000] Movable zone start PFN for each node
+[    0.000000] early_node_map[2] active PFN ranges
+[    0.000000]     0: 0x00000010 -> 0x0000009f
+[    0.000000]     0: 0x00000100 -> 0x0007ff9f
+[    0.000000] On node 0 totalpages: 524078
+[    0.000000]   DMA zone: 56 pages used for memmap
+[    0.000000]   DMA zone: 5 pages reserved
+[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
+[    0.000000]   DMA32 zone: 7111 pages used for memmap
+[    0.000000]   DMA32 zone: 512984 pages, LIFO batch:31
+[    0.000000] ACPI: PM-Timer IO Port: 0x3008
+[    0.000000] ACPI: Local APIC address 0xfee00000
+[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
+[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
+[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
+[    0.000000] ACPI: IRQ9 used by override.
+[    0.000000] Using ACPI (MADT) for SMP configuration information
+[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
+[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
+[    0.000000] nr_irqs_gsi: 40
+[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
+[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
+[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
+[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:80000000)
+[    0.000000] Booting paravirtualized kernel on bare hardware
+[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
+[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88007fc00000 s78912 r8192 d23488 u2097152
+[    0.000000] pcpu-alloc: s78912 r8192 d23488 u2097152 alloc=1*2097152
+[    0.000000] pcpu-alloc: [0] 0 
+[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 516906
+[    0.000000] Policy zone: DMA32
+[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=952fb4da-576e-46f7-8173-64f8266e5027 ro console=ttyS0,115200 console=tty0
+[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
+[    0.000000] Checking aperture...
+[    0.000000] No AGP bridge found
+[    0.000000] Node 0: aperture @ d0000000 size 64 MB
+[    0.000000] Memory: 2047948k/2096764k available (3434k kernel code, 452k absent, 48364k reserved, 3304k data, 580k init)
+[    0.000000] Hierarchical RCU implementation.
+[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
+[    0.000000] NR_IRQS:33024 nr_irqs:256 16
+[    0.000000] spurious 8259A interrupt: IRQ7.
+[    0.000000] Console: colour VGA+ 80x25
+[    0.000000] console [tty0] enabled
+[    0.000000] console [ttyS0] enabled
+[    0.000000] hpet clockevent registered
+[    0.000000] Fast TSC calibration using PIT
+[    0.000000] Detected 2010.362 MHz processor.
+[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.72 BogoMIPS (lpj=8041448)
+[    0.016004] pid_max: default: 32768 minimum: 301
+[    0.020059] Security Framework initialized
+[    0.024010] AppArmor: AppArmor disabled by boot time parameter
+[    0.028192] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
+[    0.036251] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
+[    0.044291] Mount-cache hash table entries: 256
+[    0.048196] Initializing cgroup subsys cpuacct
+[    0.052010] Initializing cgroup subsys memory
+[    0.056023] Initializing cgroup subsys devices
+[    0.060006] Initializing cgroup subsys freezer
+[    0.064006] Initializing cgroup subsys net_cls
+[    0.068007] Initializing cgroup subsys blkio
+[    0.072017] Initializing cgroup subsys perf_event
+[    0.076044] tseg: 0000000000
+[    0.076064] mce: CPU supports 5 MCE banks
+[    0.080041] SMP alternatives: switching to UP code
+[    0.088022] Freeing SMP alternatives: 8k freed
+[    0.092013] ACPI: Core revision 20110623
+[    0.097421] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
+[    0.143460] CPU0: AMD Sempron(tm) Processor 3400+ stepping 02
+[    0.152008] Performance Events: AMD PMU driver.
+[    0.152012] ... version:                0
+[    0.156010] ... bit width:              48
+[    0.160010] ... generic registers:      4
+[    0.164010] ... value mask:             0000ffffffffffff
+[    0.168011] ... max period:             00007fffffffffff
+[    0.172011] ... fixed-purpose events:   0
+[    0.176011] ... event mask:             000000000000000f
+[    0.180234] NMI watchdog enabled, takes one hw-pmu counter.
+[    0.184041] Brought up 1 CPUs
+[    0.188015] Total of 1 processors activated (4020.72 BogoMIPS).
+[    0.196263] devtmpfs: initialized
+[    0.203657] print_constraints: dummy: 
+[    0.204092] NET: Registered protocol family 16
+[    0.208160] node 0 link 0: io port [1000, 4fff]
+[    0.208164] TOM: 0000000080000000 aka 2048M
+[    0.212017] node 0 link 0: mmio [e0000000, efffffff]
+[    0.212020] node 0 link 0: mmio [a0000, bffff]
+[    0.212024] node 0 link 0: mmio [d4000000, d44fffff]
+[    0.212027] node 0 link 0: mmio [c0000000, cfffffff]
+[    0.212030] bus: [00, 05] on node 0 link 0
+[    0.212034] bus: 00 index 0 [io  0x0000-0xffff]
+[    0.212037] bus: 00 index 1 [mem 0xd4500000-0xfcffffffff]
+[    0.212040] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
+[    0.212042] bus: 00 index 3 [mem 0xd0000000-0xd44fffff]
+[    0.212045] bus: 00 index 4 [mem 0x80000000-0xcfffffff]
+[    0.212059] ACPI: bus type pci registered
+[    0.216099] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
+[    0.220016] PCI: not using MMCONFIG
+[    0.224015] PCI: Using configuration type 1 for base access
+[    0.232081] bio: create slab <bio-0> at 0
+[    0.236129] ACPI: Added _OSI(Module Device)
+[    0.240020] ACPI: Added _OSI(Processor Device)
+[    0.244017] ACPI: Added _OSI(3.0 _SCP Extensions)
+[    0.248017] ACPI: Added _OSI(Processor Aggregator Device)
+[    0.252304] ACPI: EC: Look up EC in DSDT
+[    0.256488] ACPI: Interpreter enabled
+[    0.260020] ACPI: (supports S0 S5)
+[    0.263550] ACPI: Using IOAPIC for interrupt routing
+[    0.264045] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
+[    0.268148] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
+[    0.286509] ACPI: No dock devices found.
+[    0.288029] HEST: Table not found.
+[    0.292023] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[    0.301327] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
+[    0.311966] pci_root PNP0A03:00: host bridge window [io  0x03b0-0x03df]
+[    0.312022] pci_root PNP0A03:00: host bridge window [io  0x0d00-0x4fff]
+[    0.316021] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xcfffffff]
+[    0.320021] pci_root PNP0A03:00: host bridge window [mem 0xd4000000-0xd44fffff]
+[    0.324022] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
+[    0.328022] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xefffffff]
+[    0.332022] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
+[    0.336024] pci_root PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7] ignored
+[    0.340041] pci 0000:00:00.0: [10de:005e] type 0 class 0x000580
+[    0.340117] pci 0000:00:01.0: [10de:0050] type 0 class 0x000601
+[    0.340124] pci 0000:00:01.0: reg 10: [io  0x4400-0x447f]
+[    0.340155] pci 0000:00:01.1: [10de:0052] type 0 class 0x000c05
+[    0.340164] pci 0000:00:01.1: reg 10: [io  0x4800-0x481f]
+[    0.340176] pci 0000:00:01.1: reg 20: [io  0x4480-0x44bf]
+[    0.340182] pci 0000:00:01.1: reg 24: [io  0x44c0-0x44ff]
+[    0.340197] pci 0000:00:01.1: PME# supported from D3hot D3cold
+[    0.340216] pci 0000:00:02.0: [10de:005a] type 0 class 0x000c03
+[    0.340224] pci 0000:00:02.0: reg 10: [mem 0xd4400000-0xd4400fff]
+[    0.340251] pci 0000:00:02.0: supports D1 D2
+[    0.340254] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.340269] pci 0000:00:02.1: [10de:005b] type 0 class 0x000c03
+[    0.340278] pci 0000:00:02.1: reg 10: [mem 0xd4405000-0xd44050ff]
+[    0.340311] pci 0000:00:02.1: supports D1 D2
+[    0.340313] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.340334] pci 0000:00:04.0: [10de:0059] type 0 class 0x000401
+[    0.340342] pci 0000:00:04.0: reg 10: [io  0x3c00-0x3cff]
+[    0.340347] pci 0000:00:04.0: reg 14: [io  0x4000-0x40ff]
+[    0.340353] pci 0000:00:04.0: reg 18: [mem 0xd4401000-0xd4401fff]
+[    0.340375] pci 0000:00:04.0: supports D1 D2
+[    0.340388] pci 0000:00:06.0: [10de:0053] type 0 class 0x000101
+[    0.340406] pci 0000:00:06.0: reg 20: [io  0x4820-0x482f]
+[    0.344031] pci 0000:00:07.0: [10de:0054] type 0 class 0x000101
+[    0.344039] pci 0000:00:07.0: reg 10: [io  0x4850-0x4857]
+[    0.344044] pci 0000:00:07.0: reg 14: [io  0x4878-0x487b]
+[    0.344049] pci 0000:00:07.0: reg 18: [io  0x4858-0x485f]
+[    0.344054] pci 0000:00:07.0: reg 1c: [io  0x487c-0x487f]
+[    0.344060] pci 0000:00:07.0: reg 20: [io  0x4830-0x483f]
+[    0.344065] pci 0000:00:07.0: reg 24: [mem 0xd4402000-0xd4402fff]
+[    0.344090] pci 0000:00:08.0: [10de:0055] type 0 class 0x000101
+[    0.344097] pci 0000:00:08.0: reg 10: [io  0x4860-0x4867]
+[    0.344103] pci 0000:00:08.0: reg 14: [io  0x4880-0x4883]
+[    0.344108] pci 0000:00:08.0: reg 18: [io  0x4868-0x486f]
+[    0.344113] pci 0000:00:08.0: reg 1c: [io  0x4884-0x4887]
+[    0.344118] pci 0000:00:08.0: reg 20: [io  0x4840-0x484f]
+[    0.344124] pci 0000:00:08.0: reg 24: [mem 0xd4403000-0xd4403fff]
+[    0.344151] pci 0000:00:09.0: [10de:005c] type 1 class 0x000604
+[    0.344182] pci 0000:00:0a.0: [10de:0057] type 0 class 0x000680
+[    0.344191] pci 0000:00:0a.0: reg 10: [mem 0xd4404000-0xd4404fff]
+[    0.344197] pci 0000:00:0a.0: reg 14: [io  0x4870-0x4877]
+[    0.344227] pci 0000:00:0a.0: supports D1 D2
+[    0.344230] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.344248] pci 0000:00:0b.0: [10de:005d] type 1 class 0x000604
+[    0.344278] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.344295] pci 0000:00:0c.0: [10de:005d] type 1 class 0x000604
+[    0.344324] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.344341] pci 0000:00:0d.0: [10de:005d] type 1 class 0x000604
+[    0.344369] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.344387] pci 0000:00:0e.0: [10de:005d] type 1 class 0x000604
+[    0.344414] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.344436] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
+[    0.344459] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
+[    0.344478] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
+[    0.344498] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
+[    0.344540] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300
+[    0.344554] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
+[    0.344561] pci 0000:01:00.0: reg 14: [io  0x1000-0x10ff]
+[    0.344569] pci 0000:01:00.0: reg 18: [mem 0xd4320000-0xd432ffff]
+[    0.344590] pci 0000:01:00.0: reg 30: [mem 0xd4300000-0xd431ffff pref]
+[    0.344615] pci 0000:01:00.0: supports D1 D2
+[    0.344645] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
+[    0.348024] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
+[    0.348028] pci 0000:00:09.0:   bridge window [mem 0xd4300000-0xd43fffff]
+[    0.348032] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
+[    0.348036] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
+[    0.348039] pci 0000:00:09.0:   bridge window [io  0x0d00-0x4fff] (subtractive decode)
+[    0.348043] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff] (subtractive decode)
+[    0.348046] pci 0000:00:09.0:   bridge window [mem 0xd4000000-0xd44fffff] (subtractive decode)
+[    0.348051] pci 0000:00:09.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
+[    0.348054] pci 0000:00:09.0:   bridge window [mem 0xe0000000-0xefffffff] (subtractive decode)
+[    0.348076] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
+[    0.352045] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
+[    0.356045] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
+[    0.360056] pci 0000:05:00.0: [1000:0056] type 0 class 0x000100
+[    0.360066] pci 0000:05:00.0: reg 10: [io  0x2000-0x20ff]
+[    0.360077] pci 0000:05:00.0: reg 14: [mem 0xd4210000-0xd4213fff 64bit]
+[    0.360088] pci 0000:05:00.0: reg 1c: [mem 0xd4200000-0xd420ffff 64bit]
+[    0.360101] pci 0000:05:00.0: reg 30: [mem 0xd4000000-0xd41fffff pref]
+[    0.360134] pci 0000:05:00.0: supports D1 D2
+[    0.360146] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.364030] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
+[    0.368026] pci 0000:00:0e.0:   bridge window [io  0x2000-0x2fff]
+[    0.368029] pci 0000:00:0e.0:   bridge window [mem 0xd4000000-0xd42fffff]
+[    0.368044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
+[    0.368157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
+[    0.368255]  pci0000:00: Requesting ACPI _OSC control (0x1d)
+[    0.372027]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
+[    0.376024] ACPI _OSC control for PCIe not granted, disabling ASPM
+[    0.393810] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
+[    0.400075] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
+[    0.405723] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 *18 19)
+[    0.412465] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 *19)
+[    0.417729] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
+[    0.426044] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0
+[    0.432756] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
+[    0.437731] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 22 *23)
+[    0.445143] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 *23)
+[    0.449731] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
+[    0.454937] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
+[    0.462339] ACPI: PCI Interrupt Link [LSA0] (IRQs *20 21 22 23)
+[    0.468757] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 *21 22 23)
+[    0.473733] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 *22 23)
+[    0.481237] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
+[    0.484033] vgaarb: loaded
+[    0.488031] vgaarb: bridge control possible 0000:01:00.0
+[    0.492095] PCI: Using ACPI for IRQ routing
+[    0.503219] PCI: pci_cache_line_size set to 64 bytes
+[    0.503283] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
+[    0.503286] reserve RAM buffer: 000000007ff9f000 - 000000007fffffff 
+[    0.503445] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
+[    0.504037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
+[    0.509148] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
+[    0.516126] Switching to clocksource hpet
+[    0.522622] pnp: PnP ACPI init
+[    0.525784] ACPI: bus type pnp registered
+[    0.531967] pnp 00:00: [bus 00-05]
+[    0.531971] pnp 00:00: [io  0x03b0-0x03df window]
+[    0.531974] pnp 00:00: [io  0x0d00-0x4fff window]
+[    0.531977] pnp 00:00: [mem 0xc0000000-0xcfffffff window]
+[    0.531980] pnp 00:00: [mem 0xd4000000-0xd44fffff window]
+[    0.531983] pnp 00:00: [mem 0x000a0000-0x000bffff window]
+[    0.531986] pnp 00:00: [mem 0xe0000000-0xefffffff window]
+[    0.531990] pnp 00:00: [io  0x0cf8-0x0cff]
+[    0.531992] pnp 00:00: [io  0x0000-0x0cf7 window]
+[    0.532055] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
+[    0.532255] pnp 00:01: [mem 0xe0000000-0xefffffff]
+[    0.532326] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
+[    0.538987] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
+[    0.539019] pnp 00:02: [io  0x0060]
+[    0.539022] pnp 00:02: [io  0x0064]
+[    0.539035] pnp 00:02: [irq 1]
+[    0.539074] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
+[    0.539106] pnp 00:03: [irq 12]
+[    0.539143] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
+[    0.539169] pnp 00:04: [io  0x0378-0x0387]
+[    0.539177] pnp 00:04: [irq 7]
+[    0.539179] pnp 00:04: [dma 3]
+[    0.539218] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
+[    0.539245] pnp 00:05: [io  0x03f0-0x03f7]
+[    0.539252] pnp 00:05: [irq 6]
+[    0.539254] pnp 00:05: [dma 2]
+[    0.539291] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
+[    0.539297] pnp: PnP ACPI: found 6 devices
+[    0.543438] ACPI: ACPI bus type pnp unregistered
+[    0.555111] PCI: max bus depth: 1 pci_try_num: 2
+[    0.555145] pci 0000:00:09.0: PCI bridge to [bus 01-01]
+[    0.560426] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
+[    0.566561] pci 0000:00:09.0:   bridge window [mem 0xd4300000-0xd43fffff]
+[    0.573389] pci 0000:00:09.0:   bridge window [mem 0xc0000000-0xcfffffff pref]
+[    0.580671] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
+[    0.585941] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
+[    0.591209] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
+[    0.596480] pci 0000:00:0e.0: PCI bridge to [bus 05-05]
+[    0.601745] pci 0000:00:0e.0:   bridge window [io  0x2000-0x2fff]
+[    0.607882] pci 0000:00:0e.0:   bridge window [mem 0xd4000000-0xd42fffff]
+[    0.614721] pci 0000:00:09.0: setting latency timer to 64
+[    0.614726] pci 0000:00:0b.0: setting latency timer to 64
+[    0.614731] pci 0000:00:0c.0: setting latency timer to 64
+[    0.614736] pci 0000:00:0d.0: setting latency timer to 64
+[    0.614742] pci 0000:00:0e.0: setting latency timer to 64
+[    0.614746] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
+[    0.614749] pci_bus 0000:00: resource 5 [io  0x0d00-0x4fff]
+[    0.614752] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xcfffffff]
+[    0.614755] pci_bus 0000:00: resource 7 [mem 0xd4000000-0xd44fffff]
+[    0.614758] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
+[    0.614761] pci_bus 0000:00: resource 9 [mem 0xe0000000-0xefffffff]
+[    0.614764] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
+[    0.614767] pci_bus 0000:01: resource 1 [mem 0xd4300000-0xd43fffff]
+[    0.614770] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff pref]
+[    0.614773] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
+[    0.614776] pci_bus 0000:01: resource 5 [io  0x0d00-0x4fff]
+[    0.614779] pci_bus 0000:01: resource 6 [mem 0xc0000000-0xcfffffff]
+[    0.614782] pci_bus 0000:01: resource 7 [mem 0xd4000000-0xd44fffff]
+[    0.614785] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
+[    0.614788] pci_bus 0000:01: resource 9 [mem 0xe0000000-0xefffffff]
+[    0.614792] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
+[    0.614795] pci_bus 0000:05: resource 1 [mem 0xd4000000-0xd42fffff]
+[    0.614866] NET: Registered protocol family 2
+[    0.621400] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
+[    0.629741] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
+[    0.641032] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
+[    0.648706] TCP: Hash tables configured (established 262144 bind 65536)
+[    0.655376] TCP reno registered
+[    0.658572] UDP hash table entries: 1024 (order: 3, 32768 bytes)
+[    0.664659] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
+[    0.671295] NET: Registered protocol family 1
+[    0.675939] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 23
+[    0.681901] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 22
+[    0.687754] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.693315] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.698881] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.704413] pci 0000:00:0b.0: Found disabled HT MSI Mapping
+[    0.710032] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.715595] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.721124] pci 0000:00:0c.0: Found disabled HT MSI Mapping
+[    0.726740] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.732307] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.737840] pci 0000:00:0d.0: Found disabled HT MSI Mapping
+[    0.743458] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.749029] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.754559] pci 0000:00:0e.0: Found disabled HT MSI Mapping
+[    0.760177] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    0.765716] pci 0000:01:00.0: Boot video device
+[    0.765723] PCI: CLS 64 bytes, default 64
+[    0.765800] Unpacking initramfs...
+[    1.097501] Freeing initrd memory: 11060k freed
+[    1.112638] agpgart-amd64 0000:01:00.0: AGP bridge [1002/5961]
+[    1.118538] agpgart-amd64 0000:01:00.0: aperture size 4096 MB is not right, using settings from NB
+[    1.129696] agpgart-amd64 0000:01:00.0: AGP aperture is 64M @ 0xd0000000
+[    1.136512] platform rtc_cmos: registered platform RTC device (no PNP device found)
+[    1.144586] audit: initializing netlink socket (disabled)
+[    1.150042] type=2000 audit(1445710898.148:1): initialized
+[    1.172967] HugeTLB registered 2 MB page size, pre-allocated 0 pages
+[    1.179904] VFS: Disk quotas dquot_6.5.2
+[    1.183912] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[    1.190487] msgmni has been set to 4021
+[    1.194555] alg: No test for stdrng (krng)
+[    1.198735] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
+[    1.206188] io scheduler noop registered
+[    1.210157] io scheduler deadline registered
+[    1.214487] io scheduler cfq registered (default)
+[    1.219361] pcieport 0000:00:0b.0: setting latency timer to 64
+[    1.219391] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
+[    1.219454] pcieport 0000:00:0c.0: setting latency timer to 64
+[    1.219473] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
+[    1.219529] pcieport 0000:00:0d.0: setting latency timer to 64
+[    1.219549] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
+[    1.219596] pcieport 0000:00:0e.0: setting latency timer to 64
+[    1.219614] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
+[    1.219701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+[    1.225356] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
+[    1.232011] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+[    1.238732] ERST: Table is not found!
+[    1.242441] GHES: HEST is not enabled!
+[    1.246326] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+[    1.272922] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
+[    1.299264] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
+[    1.305673] Linux agpgart interface v0.103
+[    1.309935] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
+[    1.320355] serio: i8042 KBD port at 0x60,0x64 irq 1
+[    1.325367] serio: i8042 AUX port at 0x60,0x64 irq 12
+[    1.330598] mousedev: PS/2 mouse device common for all mice
+[    1.336312] rtc_cmos rtc_cmos: RTC can wake from S4
+[    1.341366] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
+[    1.347801] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
+[    1.354562] cpuidle: using governor ladder
+[    1.358702] cpuidle: using governor menu
+[    1.362930] TCP cubic registered
+[    1.366245] NET: Registered protocol family 10
+[    1.371302] Mobile IPv6
+[    1.373803] NET: Registered protocol family 17
+[    1.378299] Registering the dns_resolver key type
+[    1.383227] PM: Hibernation image not present or could not be loaded.
+[    1.383244] registered taskstats version 1
+[    1.387660] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
+[    1.396620] rtc_cmos rtc_cmos: setting system clock to 2015-10-24 18:21:39 UTC (1445710899)
+[    1.405150] Initializing network drop monitor service
+[    1.411732] Freeing unused kernel memory: 580k freed
+[    1.417209] Write protecting the kernel read-only data: 6144k
+[    1.426367] Freeing unused kernel memory: 644k freed
+[    1.435443] Freeing unused kernel memory: 688k freed
+[    1.464269] udevd[44]: starting version 175
+[    1.544222] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
+[    1.552123] SCSI subsystem initialized
+[    1.567885] usbcore: registered new interface driver usbfs
+[    1.595451] Fusion MPT base driver 3.04.20
+[    1.599660] Copyright (c) 1999-2008 LSI Corporation
+[    1.608105] libata version 3.00 loaded.
+[    1.610601] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 21
+[    1.625407] usbcore: registered new interface driver hub
+[    1.651923] forcedeth 0000:00:0a.0: setting latency timer to 64
+[    1.656081] FDC 0 is a post-1991 82077
+[    1.659959] usbcore: registered new device driver usb
+[    1.665662] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    1.684523] Fusion MPT SAS Host driver 3.04.20
+[    1.702090] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
+[    1.708066] mptbase: ioc0: Initiating bringup
+[    2.144038] Refined TSC clocksource calibration: 2010.302 MHz.
+[    2.149922] Switching to clocksource tsc
+[    2.176711] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:16:e4:55
+[    2.185123] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
+[    2.192842] sata_nv 0000:00:07.0: version 3.5
+[    2.192996] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
+[    2.198905] sata_nv 0000:00:07.0: setting latency timer to 64
+[    2.199434] scsi0 : sata_nv
+[    2.202490] scsi1 : sata_nv
+[    2.205452] ata1: SATA max UDMA/133 cmd 0x4850 ctl 0x4878 bmdma 0x4830 irq 20
+[    2.212632] ata2: SATA max UDMA/133 cmd 0x4858 ctl 0x487c bmdma 0x4838 irq 20
+[    2.220033] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 21
+[    2.225945] sata_nv 0000:00:08.0: setting latency timer to 64
+[    2.226473] scsi2 : sata_nv
+[    2.229479] scsi3 : sata_nv
+[    2.232435] ata3: SATA max UDMA/133 cmd 0x4860 ctl 0x4880 bmdma 0x4840 irq 21
+[    2.239616] ata4: SATA max UDMA/133 cmd 0x4868 ctl 0x4884 bmdma 0x4848 irq 21
+[    2.247093] pata_amd 0000:00:06.0: version 0.4.1
+[    2.247152] pata_amd 0000:00:06.0: setting latency timer to 64
+[    2.247866] scsi4 : pata_amd
+[    2.250980] scsi5 : pata_amd
+[    2.254028] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4820 irq 14
+[    2.261036] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4828 irq 15
+[    2.268535] ehci_hcd 0000:00:02.1: setting latency timer to 64
+[    2.268540] ehci_hcd 0000:00:02.1: EHCI Host Controller
+[    2.274029] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
+[    2.281519] ehci_hcd 0000:00:02.1: debug port 1
+[    2.286098] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
+[    2.286124] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd4405000
+[    2.300006] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
+[    2.305795] ioc0: LSISAS1064E B3: Capabilities={Initiator}
+[    2.311509] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+[    2.318343] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    2.325621] usb usb1: Product: EHCI Host Controller
+[    2.330544] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
+[    2.336593] usb usb1: SerialNumber: 0000:00:02.1
+[    2.341270] mptsas 0000:05:00.0: setting latency timer to 64
+[    2.342944] hub 1-0:1.0: USB hub found
+[    2.348503] hub 1-0:1.0: 10 ports detected
+[    2.437100] ata5.00: HPA detected: current 156250000, native 156301488
+[    2.443676] ata5.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100
+[    2.450251] ata5.00: 156250000 sectors, multi 0: LBA 
+[    2.455348] ata5: nv_mode_filter: 0x3f39f&0xfffff->0x3f39f, BIOS=0x0 (0x0) ACPI=0x0
+[    2.469023] ata5.00: configured for UDMA/100
+[    2.536012] ata1: SATA link down (SStatus 0 SControl 300)
+[    2.560008] ata3: SATA link down (SStatus 0 SControl 300)
+[    2.852008] ata2: SATA link down (SStatus 0 SControl 300)
+[    3.168008] ata4: SATA link down (SStatus 0 SControl 300)
+[    3.173588] scsi 4:0:0:0: Direct-Access     ATA      WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5
+[    3.347323] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[    3.364383] sd 4:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
+[    3.372401] ohci_hcd 0000:00:02.0: setting latency timer to 64
+[    3.372406] ohci_hcd 0000:00:02.0: OHCI Host Controller
+[    3.377720] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
+[    3.385255] sd 4:0:0:0: [sda] Write Protect is off
+[    3.390092] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
+[    3.390115] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+[    3.399255] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd4400000
+[    3.423989]  sda: sda1 sda2
+[    3.427286] sd 4:0:0:0: [sda] Attached SCSI disk
+[    3.434888] sd 4:0:0:0: Attached scsi generic sg0 type 0
+[    3.462024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+[    3.468863] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    3.476138] usb usb2: Product: OHCI Host Controller
+[    3.481052] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
+[    3.487131] usb usb2: SerialNumber: 0000:00:02.0
+[    3.492242] hub 2-0:1.0: USB hub found
+[    3.496055] hub 2-0:1.0: 10 ports detected
+[   12.517897] scsi6 : ioc0: LSISAS1064E B3, FwRev=01210000h, Ports=1, MaxQ=483, IRQ=18
+[   12.559205] microcode: CPU0: family 15 not supported
+[   12.570044] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
+[   12.655146] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
+[   14.380839] udevd[297]: starting version 175
+[   15.046104] EDAC MC: Ver: 2.1.0
+[   15.078007] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
+[   15.087555] ACPI: Power Button [PWRF]
+[   15.233826] MCE: In-kernel MCE decoding enabled.
+[   15.249684] AMD64 EDAC driver v3.4.0
+[   15.253393] EDAC amd64: DRAM ECC disabled.
+[   15.257540] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
+[   15.257542]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
+[   15.257544]  (Note that use of the override may cause unknown side effects.)
+[   15.292047] input: PC Speaker as /devices/platform/pcspkr/input/input2
+[   15.365532] i2c i2c-0: nForce2 SMBus adapter at 0x4480
+[   15.371122] i2c i2c-1: nForce2 SMBus adapter at 0x44c0
+[   15.451068] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
+[   15.460483] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
+[   15.467023] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
+[   15.484463] parport_pc 00:04: reported by Plug and Play ACPI
+[   15.490644] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
+[   15.511904] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23
+[   15.520570] snd_intel8x0 0000:00:04.0: setting latency timer to 64
+[   15.844023] intel8x0_measure_ac97_clock: measured 54669 usecs (2688 samples)
+[   15.851119] intel8x0: clocking to 46859
+[   17.197688] Adding 8387580k swap on /dev/sda1.  Priority:-1 extents:1 across:8387580k 
+[   17.228094] EXT4-fs (sda2): re-mounted. Opts: (null)
+[   17.514032] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
+[   17.617075] loop: module loaded
+[   17.708299] w83627hf: w83627hf: Found W83627THF chip at 0x290
+[   18.986501] NET: Registered protocol family 8
+[   18.990924] NET: Registered protocol family 20
+[   21.928396] Bluetooth: Core ver 2.16
+[   21.932296] NET: Registered protocol family 31
+[   21.936794] Bluetooth: HCI device and connection manager initialized
+[   21.943192] Bluetooth: HCI socket layer initialized
+[   21.948109] Bluetooth: L2CAP socket layer initialized
+[   21.953677] Bluetooth: SCO socket layer initialized
+[   22.055179] Bluetooth: RFCOMM TTY layer initialized
+[   22.060550] Bluetooth: RFCOMM socket layer initialized
+[   22.065757] Bluetooth: RFCOMM ver 1.11
+[   22.072947] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+[   22.078356] Bluetooth: BNEP filters: protocol multicast
+[   22.229079] powernow-k8: Found 1 AMD Sempron(tm) Processor 3400+ (1 cpu cores) (version 2.20.00)
+[   22.238295] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
+[   22.244728] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup