[    0.000000] Linux version 4.16.13-2-ARCH (builduser@bpiotrowski) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Fri Jun 1 18:46:11 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a7ef3ac7-5cc1-4350-aa09-e542549bb49b rw modprobe.blacklist=mei_me quiet iomem=relaxed console=tty0 console=ttyS0,115200n8
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007ff38fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff39000-0x000000007fffffff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000829fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027c5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: GIGABYTE GA-H61M-S2PV/GA-H61M-S2PV, BIOS 4.8-539-gaea8eecded 06/17/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27c600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 0D0000000 mask FF0000000 write-combining
[    0.000000]   2 base 100000000 mask F00000000 write-back
[    0.000000]   3 base 200000000 mask F80000000 write-back
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x7ff39 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] reserving inaccessible SNB gfx pages
[    0.000000] BRK [0x7f655000, 0x7f655fff] PGTABLE
[    0.000000] BRK [0x7f656000, 0x7f656fff] PGTABLE
[    0.000000] BRK [0x7f657000, 0x7f657fff] PGTABLE
[    0.000000] BRK [0x7f658000, 0x7f658fff] PGTABLE
[    0.000000] BRK [0x7f659000, 0x7f659fff] PGTABLE
[    0.000000] BRK [0x7f65a000, 0x7f65afff] PGTABLE
[    0.000000] BRK [0x7f65b000, 0x7f65bfff] PGTABLE
[    0.000000] BRK [0x7f65c000, 0x7f65cfff] PGTABLE
[    0.000000] BRK [0x7f65d000, 0x7f65dfff] PGTABLE
[    0.000000] BRK [0x7f65e000, 0x7f65efff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36e03000-0x376f8fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF4B0E0 000054 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF4D980 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF4B280 0026F5 (v03 COREv4 COREBOOT 20141018 INTL 20180531)
[    0.000000] ACPI: FACS 0x000000007FF4B240 000040
[    0.000000] ACPI: FACS 0x000000007FF4B240 000040
[    0.000000] ACPI: SSDT 0x000000007FF4DA80 0017FC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF4F280 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF4F2C0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF4F300 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF4F370 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027c5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27c5fa000-0x27c5fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027c5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000040200000-0x000000007ff38fff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027c5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027c5fffff]
[    0.000000] On node 0 totalpages: 2080984
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 159 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8109 pages used for memmap
[    0.000000]   DMA32 zone: 518969 pages, LIFO batch:31
[    0.000000]   Normal zone: 24344 pages used for memmap
[    0.000000]   Normal zone: 1558016 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 102 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7ff39000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x829fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x82a00000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[    0.000000] e820: [mem 0x82a00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x95/0x4da with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2048308
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a7ef3ac7-5cc1-4350-aa09-e542549bb49b rw modprobe.blacklist=mei_me quiet iomem=relaxed console=tty0 console=ttyS0,115200n8
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8093372K/8323936K available (10252K kernel code, 1261K rwdata, 3408K rodata, 1456K init, 640K bss, 230564K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31757 entries in 125 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 456, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 3093.077 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c95bc4e9f6, max_idle_ns: 440795363358 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 6188.91 BogoMIPS (lpj=10310256)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.019999] Security Framework initialized
[    0.019999] Yama: becoming mindful.
[    0.024192] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024830] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024869] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024890] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.025069] CPU: Physical Processor ID: 0
[    0.025070] CPU: Processor Core ID: 0
[    0.025078] mce: CPU supports 7 MCE banks
[    0.025085] CPU0: Thermal monitoring enabled (TM1)
[    0.025092] process: using mwait in idle threads
[    0.025094] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.025095] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.025096] Spectre V2 : Mitigation: Full generic retpoline
[    0.025097] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.025097] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.025098] Speculative Store Bypass: Vulnerable
[    0.025173] Freeing SMP alternatives memory: 24K
[    0.025777] TSC deadline timer enabled
[    0.025781] smpboot: CPU0: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[    0.036678] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.036711] ... version:                3
[    0.036712] ... bit width:              48
[    0.036713] ... generic registers:      4
[    0.036715] ... value mask:             0000ffffffffffff
[    0.036716] ... max period:             00007fffffffffff
[    0.036717] ... fixed-purpose events:   3
[    0.036718] ... event mask:             000000070000000f
[    0.043338] Hierarchical SRCU implementation.
[    0.063478] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.070004] smp: Bringing up secondary CPUs ...
[    0.100022] x86: Booting SMP configuration:
[    0.100023] .... node  #0, CPUs:      #1 #2 #3
[    0.162802] smp: Brought up 1 node, 4 CPUs
[    0.162802] smpboot: Max logical packages: 1
[    0.162802] smpboot: Total of 4 processors activated (24754.64 BogoMIPS)
[    0.163640] devtmpfs: initialized
[    0.163640] x86/mm: Memory block size: 128MB
[    0.163938] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.163938] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.163938] pinctrl core: initialized pinctrl subsystem
[    0.163938] RTC time: 21:41:46, date: 06/17/18
[    0.163938] NET: Registered protocol family 16
[    0.163938] cpuidle: using governor ladder
[    0.166687] cpuidle: using governor menu
[    0.166752] ACPI: bus type PCI registered
[    0.166753] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.166818] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.166820] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.166828] PCI: Using configuration type 1 for base access
[    0.166856] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.167442] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.167442] ACPI: Added _OSI(Module Device)
[    0.167442] ACPI: Added _OSI(Processor Device)
[    0.167442] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.167442] ACPI: Added _OSI(Processor Aggregator Device)
[    0.167442] ACPI: Executed 1 blocks of module-level executable AML code
[    0.170712] ACPI: Interpreter enabled
[    0.170727] ACPI: (supports S0 S3 S4 S5)
[    0.170728] ACPI: Using IOAPIC for interrupt routing
[    0.170752] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.174246] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.174251] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.174310] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.174320] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.174579] PCI host bridge to bus 0000:00
[    0.174581] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.174582] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.174583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.174584] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.174586] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.174587] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.174588] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.174589] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.174590] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.174591] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.174592] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.174593] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.174595] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.174596] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.174597] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.174598] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.174599] pci_bus 0000:00: root bus resource [mem 0x82a00001-0xefffffff window]
[    0.174602] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.174603] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.174610] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[    0.174701] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.174730] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.174801] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[    0.174810] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[    0.174814] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.174818] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
[    0.174827] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.174923] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[    0.174944] pci 0000:00:1a.0: reg 0x10: [mem 0xe0505000-0xe05053ff]
[    0.175026] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.175101] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[    0.175122] pci 0000:00:1b.0: reg 0x10: [mem 0xe0500000-0xe0503fff 64bit]
[    0.175193] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.175278] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[    0.175407] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.175494] pci 0000:00:1c.1: [8086:1c18] type 01 class 0x060400
[    0.175574] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.175656] pci 0000:00:1c.4: [8086:1c1a] type 01 class 0x060400
[    0.175730] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.175811] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[    0.175833] pci 0000:00:1d.0: reg 0x10: [mem 0xe0506000-0xe05063ff]
[    0.175914] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.176669] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.176669] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[    0.176669] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[    0.176669] pci 0000:00:1f.2: reg 0x10: [io  0x2060-0x2067]
[    0.176669] pci 0000:00:1f.2: reg 0x14: [io  0x2070-0x2073]
[    0.176669] pci 0000:00:1f.2: reg 0x18: [io  0x2068-0x206f]
[    0.176669] pci 0000:00:1f.2: reg 0x1c: [io  0x2074-0x2077]
[    0.176669] pci 0000:00:1f.2: reg 0x20: [io  0x2040-0x205f]
[    0.176669] pci 0000:00:1f.2: reg 0x24: [mem 0xe0504000-0xe05047ff]
[    0.176669] pci 0000:00:1f.2: PME# supported from D3hot
[    0.176669] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[    0.176669] pci 0000:00:1f.3: reg 0x10: [mem 0xe0507000-0xe05070ff 64bit]
[    0.176669] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.176669] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.176669] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.176725] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.176760] pci 0000:03:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.176794] pci 0000:03:00.0: reg 0x18: [mem 0xe0404000-0xe0404fff 64bit pref]
[    0.176815] pci 0000:03:00.0: reg 0x20: [mem 0xe0400000-0xe0403fff 64bit pref]
[    0.176929] pci 0000:03:00.0: supports D1 D2
[    0.176930] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.186704] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.186711] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.186725] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff 64bit pref]
[    0.186813] pci 0000:04:00.0: [1283:8892] type 01 class 0x060401
[    0.186978] pci 0000:04:00.0: supports D1 D2
[    0.186979] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.187019] pci 0000:00:1c.4: PCI bridge to [bus 04-05]
[    0.187184] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[    0.187291] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[    0.187300] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.187301] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.187302] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.187303] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff window] (subtractive decode)
[    0.187304] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff window] (subtractive decode)
[    0.187306] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff window] (subtractive decode)
[    0.187307] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff window] (subtractive decode)
[    0.187308] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.187309] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.187310] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.187311] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.187312] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.187314] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.187315] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff window] (subtractive decode)
[    0.187316] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff window] (subtractive decode)
[    0.187317] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.187318] pci 0000:00:1e.0:   bridge window [mem 0x82a00001-0xefffffff window] (subtractive decode)
[    0.187319] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff window] (subtractive decode)
[    0.187520] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187581] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187640] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187698] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187756] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187814] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187872] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.187930] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.188155] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.188155] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.188155] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.188155] vgaarb: loaded
[    0.188155] EDAC MC: Ver: 3.0.0
[    0.188155] PCI: Using ACPI for IRQ routing
[    0.190585] PCI: pci_cache_line_size set to 64 bytes
[    0.190632] e820: reserve RAM buffer [mem 0x7ff39000-0x7fffffff]
[    0.190633] e820: reserve RAM buffer [mem 0x27c600000-0x27fffffff]
[    0.190713] NetLabel: Initializing
[    0.190714] NetLabel:  domain hash size = 128
[    0.190714] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.190727] NetLabel:  unlabeled traffic allowed by default
[    0.190730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.190730] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.192470] clocksource: Switched to clocksource tsc-early
[    0.198585] VFS: Disk quotas dquot_6.6.0
[    0.198602] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.198663] pnp: PnP ACPI init
[    0.198838] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.198839] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.198841] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.198842] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.198843] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.198845] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.198846] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.198847] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.198849] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[    0.198850] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[    0.198855] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199104] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.199108] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.199141] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.199142] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.199145] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.199163] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.199185] pnp: PnP ACPI: found 4 devices
[    0.204941] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.205000] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.205006] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.205024] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.205027] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    0.205034] pci 0000:00:1c.1:   bridge window [mem 0xe0400000-0xe04fffff 64bit pref]
[    0.205040] pci 0000:04:00.0: PCI bridge to [bus 05]
[    0.205064] pci 0000:00:1c.4: PCI bridge to [bus 04-05]
[    0.205075] pci 0000:00:1e.0: PCI bridge to [bus 06]
[    0.205086] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.205087] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.205089] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.205090] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.205091] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.205092] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.205093] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.205095] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.205096] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.205097] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.205098] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.205099] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.205101] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.205102] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.205103] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.205104] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.205105] pci_bus 0000:00: resource 20 [mem 0x82a00001-0xefffffff window]
[    0.205107] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.205108] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.205109] pci_bus 0000:03: resource 2 [mem 0xe0400000-0xe04fffff 64bit pref]
[    0.205111] pci_bus 0000:06: resource 4 [io  0x0000-0x0cf7 window]
[    0.205112] pci_bus 0000:06: resource 5 [io  0x0d00-0xffff window]
[    0.205113] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.205114] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.205116] pci_bus 0000:06: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.205117] pci_bus 0000:06: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.205118] pci_bus 0000:06: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.205119] pci_bus 0000:06: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.205121] pci_bus 0000:06: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.205122] pci_bus 0000:06: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.205123] pci_bus 0000:06: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.205124] pci_bus 0000:06: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.205126] pci_bus 0000:06: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.205127] pci_bus 0000:06: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.205128] pci_bus 0000:06: resource 18 [mem 0x000ec000-0x000effff window]
[    0.205129] pci_bus 0000:06: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.205131] pci_bus 0000:06: resource 20 [mem 0x82a00001-0xefffffff window]
[    0.205132] pci_bus 0000:06: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.205202] NET: Registered protocol family 2
[    0.205326] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.205355] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.205461] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.205581] TCP: Hash tables configured (established 65536 bind 65536)
[    0.205614] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.205637] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.205691] NET: Registered protocol family 1
[    0.205716] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.206051] PCI: CLS 64 bytes, default 64
[    0.206088] Unpacking initramfs...
[    0.301395] Freeing initrd memory: 9176K
[    0.301404] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.301407] software IO TLB [mem 0x7a000000-0x7e000000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.301543] Scanning for low memory corruption every 60 seconds
[    0.301992] Initialise system trusted keyrings
[    0.302000] Key type blacklist registered
[    0.302046] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.302977] zbud: loaded
[    0.303994] Key type asymmetric registered
[    0.303995] Asymmetric key parser 'x509' registered
[    0.304026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.304052] io scheduler noop registered
[    0.304053] io scheduler deadline registered
[    0.304085] io scheduler cfq registered (default)
[    0.304086] io scheduler mq-deadline registered
[    0.304087] io scheduler kyber registered
[    0.304092] io scheduler bfq registered
[    0.304810] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    0.304838] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    0.304863] pcieport 0000:00:1c.1: Signaling PME with IRQ 26
[    0.304883] pcieport 0000:00:1c.4: Signaling PME with IRQ 27
[    0.304940] efifb: probing for efifb
[    0.304951] efifb: framebuffer at 0xd0000000, using 8128k, total 8128k
[    0.304952] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.304953] efifb: scrolling: redraw
[    0.304954] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.309192] Console: switching to colour frame buffer device 240x67
[    0.313349] fb0: EFI VGA frame buffer device
[    0.313359] intel_idle: MWAIT substates: 0x1120
[    0.313360] intel_idle: v0.4.1 model 0x2A
[    0.313460] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.313498] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.313506] ACPI: Power Button [PWRB]
[    0.313547] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.313563] ACPI: Power Button [PWRF]
[    0.313636] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    0.313986] acpi device:0b: registered as cooling_device0
[    0.314025] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    0.314484] [Firmware Bug]: Invalid critical threshold (2732)
[    0.314646] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.335325] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.336275] intel_pstate: Intel P-state driver initializing
[    0.336366] ledtrig-cpu: registered to indicate activity on CPUs
[    0.336726] NET: Registered protocol family 10
[    0.341996] Segment Routing with IPv6
[    0.342034] NET: Registered protocol family 17
[    0.342390] RAS: Correctable Errors collector initialized.
[    0.342444] microcode: sig=0x206a7, pf=0x2, revision=0x2d
[    0.342518] microcode: Microcode Update Driver: v2.2.
[    0.342532] sched_clock: Marking stable (342511485, 0)->(327449679, 15061806)
[    0.342777] registered taskstats version 1
[    0.342786] Loading compiled-in X.509 certificates
[    0.342815] zswap: loaded using pool lzo/zbud
[    0.347409] Key type big_key registered
[    0.347644]   Magic number: 6:638:702
[    0.347694] hctosys: unable to open rtc device (rtc0)
[    0.349338] Freeing unused kernel memory: 1456K
[    0.349340] Write protecting the kernel read-only data: 16384k
[    0.349834] Freeing unused kernel memory: 2016K
[    0.351293] Freeing unused kernel memory: 688K
[    0.423018] ACPI: bus type USB registered
[    0.423040] usbcore: registered new interface driver usbfs
[    0.423046] usbcore: registered new interface driver hub
[    0.423073] usbcore: registered new device driver usb
[    0.424513] SCSI subsystem initialized
[    0.424663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.424918] ehci-pci: EHCI PCI platform driver
[    0.425129] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.425136] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.425152] ehci-pci 0000:00:1a.0: debug port 2
[    0.429054] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.429074] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0505000
[    0.429217] libata version 3.00 loaded.
[    0.440063] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.440138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.440140] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.440142] usb usb1: Product: EHCI Host Controller
[    0.440143] usb usb1: Manufacturer: Linux 4.16.13-2-ARCH ehci_hcd
[    0.440144] usb usb1: SerialNumber: 0000:00:1a.0
[    0.440267] hub 1-0:1.0: USB hub found
[    0.440274] hub 1-0:1.0: 3 ports detected
[    0.440538] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.440545] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.440558] ehci-pci 0000:00:1d.0: debug port 2
[    0.444458] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.444473] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0506000
[    0.456726] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.456796] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.456798] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.456800] usb usb2: Product: EHCI Host Controller
[    0.456802] usb usb2: Manufacturer: Linux 4.16.13-2-ARCH ehci_hcd
[    0.456803] usb usb2: SerialNumber: 0000:00:1d.0
[    0.456977] hub 2-0:1.0: USB hub found
[    0.456986] hub 2-0:1.0: 3 ports detected
[    0.457157] ahci 0000:00:1f.2: version 3.0
[    0.457419] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.470094] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.470099] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    0.471543] scsi host0: ahci
[    0.471828] scsi host1: ahci
[    0.472039] scsi host2: ahci
[    0.472265] scsi host3: ahci
[    0.472415] scsi host4: ahci
[    0.472561] scsi host5: ahci
[    0.472638] ata1: SATA max UDMA/133 abar m2048@0xe0504000 port 0xe0504100 irq 28
[    0.472642] ata2: SATA max UDMA/133 abar m2048@0xe0504000 port 0xe0504180 irq 28
[    0.472643] ata3: DUMMY
[    0.472644] ata4: DUMMY
[    0.472648] ata5: SATA max UDMA/133 abar m2048@0xe0504000 port 0xe0504300 irq 28
[    0.472651] ata6: SATA max UDMA/133 abar m2048@0xe0504000 port 0xe0504380 irq 28
[    0.770048] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.790061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.790327] ata1.00: ATA-10: KINGSTON SA400S37240G, SBFK71B1, max UDMA/133
[    0.790331] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    0.790595] ata1.00: configured for UDMA/133
[    0.790854] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SA400S3 71B1 PQ: 0 ANSI: 5
[    0.793362] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.917151] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    0.917155] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.917444] hub 1-1:1.0: USB hub found
[    0.917636] hub 1-1:1.0: 4 ports detected
[    0.940431] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    0.940434] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.940689] hub 2-1:1.0: USB hub found
[    0.940885] hub 2-1:1.0: 6 ports detected
[    1.109154] ata2: SATA link down (SStatus 0 SControl 300)
[    1.196714] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[    1.294778] usb 1-1.2: New USB device found, idVendor=14cd, idProduct=8601
[    1.294781] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    1.294784] usb 1-1.2: Product: USB 2.0 Hub            
[    1.294786] usb 1-1.2: Manufacturer: USB Device  
[    1.295184] hub 1-1.2:1.0: USB hub found
[    1.295374] hub 1-1.2:1.0: 4 ports detected
[    1.306706] tsc: Refined TSC clocksource calibration: 3092.973 MHz
[    1.306717] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c95594edb3, max_idle_ns: 440795220223 ns
[    1.306737] clocksource: Switched to clocksource tsc
[    1.423451] ata5: SATA link down (SStatus 0 SControl 300)
[    1.573381] usb 1-1.2.2: new low-speed USB device number 4 using ehci-pci
[    1.676278] usb 1-1.2.2: New USB device found, idVendor=046d, idProduct=c050
[    1.676282] usb 1-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.676284] usb 1-1.2.2: Product: USB-PS/2 Optical Mouse
[    1.676287] usb 1-1.2.2: Manufacturer: Logitech
[    1.679597] hidraw: raw HID events driver (C) Jiri Kosina
[    1.683919] usbcore: registered new interface driver usbhid
[    1.683921] usbhid: USB HID core driver
[    1.685108] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C050.0001/input/input3
[    1.685183] hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2.2/input0
[    1.736604] ata6: SATA link down (SStatus 0 SControl 300)
[    1.741080] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    1.741100] sd 0:0:0:0: [sda] Write Protect is off
[    1.741103] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.741129] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.743332]  sda: sda1 sda2 sda3
[    1.743953] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.750050] usb 1-1.2.4: new low-speed USB device number 5 using ehci-pci
[    1.824951] random: fast init done
[    1.847188] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.861884] usb 1-1.2.4: New USB device found, idVendor=03f0, idProduct=0024
[    1.861888] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.861898] usb 1-1.2.4: Product: HP Basic USB Keyboard
[    1.861900] usb 1-1.2.4: Manufacturer: CHICONY
[    1.869788] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:03F0:0024.0002/input/input4
[    1.923519] hid-generic 0003:03F0:0024.0002: input,hidraw1: USB HID v1.11 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1a.0-1.2.4/input0
[    2.085041] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    2.100151] systemd[1]: Detected architecture x86-64.
[    2.102682] systemd[1]: Set hostname to <crimsonhell>.
[    2.227033] random: systemd: uninitialized urandom read (16 bytes read)
[    2.227127] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    2.227178] random: systemd: uninitialized urandom read (16 bytes read)
[    2.227246] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.232469] random: systemd: uninitialized urandom read (16 bytes read)
[    2.232543] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    2.233760] systemd[1]: Created slice system-getty.slice.
[    2.233783] systemd[1]: Reached target Paths.
[    2.234000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.234101] systemd[1]: Listening on LVM2 metadata daemon socket.
[    2.251306] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[    2.305942] systemd-journald[224]: Received request to flush runtime journal from PID 1
[    2.454549] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20180105/utaddress-247)
[    2.454556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.454560] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
[    2.454564] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.454565] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
[    2.454569] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.454570] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20180105/utaddress-247)
[    2.454574] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.454575] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.475607] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.480048] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    2.491439] rtc_cmos 00:03: RTC can wake from S4
[    2.491571] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    2.491603] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    2.510520] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    2.517137] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    2.517139] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    2.517141] RAPL PMU: hw unit of domain package 2^-16 Joules
[    2.517141] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    2.518041] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.520819] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0x        (ptrval), 90:2b:34:76:39:d7, XID 0c900800 IRQ 29
[    2.520822] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.522975] Linux agpgart interface v0.103
[    2.537979] cryptd: max_cpu_qlen set to 1000
[    2.554055] Adding 8388604k swap on /swapfile.  Priority:-2 extents:49 across:14082044k SSFS
[    2.561591] mousedev: PS/2 mouse device common for all mice
[    2.584368] iTCO_vendor_support: vendor-support=0
[    2.587854] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.588295] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    2.601149] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    2.705322] intel_rapl: Found RAPL domain package
[    2.705324] intel_rapl: Found RAPL domain core
[    2.705325] intel_rapl: Found RAPL domain uncore
[    2.786139] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[    2.786142] fb: switching to inteldrmfb from EFI VGA
[    2.786163] Console: switching to colour dummy device 80x25
[    2.786402] [drm] Replacing VGA console driver
[    2.786464] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.786465] [drm] Driver supports precise vblank timestamp query.
[    2.786474] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000c3fff window]
[    2.786479] caller pci_map_rom+0x58/0xe0 mapping multiple BARs
[    2.786482] i915 0000:00:02.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x57db
[    2.786484] [drm] Failed to find VBIOS tables (VBT)
[    2.787730] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.793772] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    2.793942] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.803610] it87: Found IT8728F chip at 0xa30, revision 1
[    2.803631] it87: Beeping is supported
[    2.817447] fbcon: inteldrmfb (fb0) is primary device
[    2.876484] Console: switching to colour frame buffer device 240x67
[    2.898697] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.938650] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.938654] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.938657] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.938658] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[    2.938660] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[    2.938663] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[    2.938665] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[    2.938667] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[    2.938669] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[    2.960315] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    2.960384] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    2.960446] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    2.960648] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    2.960710] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    2.961008] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    2.961080] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    3.216559] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.374863] r8169 0000:03:00.0 enp3s0: link down
[    3.374958] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[    3.375778] r8169 0000:03:00.0 enp3s0: link down
[    4.509766] fuse init (API version 7.26)
[    4.900677] r8169 0000:03:00.0 enp3s0: link up
[    4.900690] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[   13.272340] random: crng init done
[   13.272344] random: 7 urandom warning(s) missed due to ratelimiting