sudo: unable to resolve host BiostarTest
[    0.000000] Linux version 4.15.0-45-generic (buildd@lcy01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #48~16.04.1-Ubuntu SMP Tue Jan 29 18:03:48 UTC 2019 (Ubuntu 4.15.0-45.48~16.04.1-generic 4.15.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-generic root=UUID=ca091366-d83f-47c0-b37a-012f03cec05f ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005fd2dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000005fd2e000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Biostar AM1ML/AM1ML, BIOS 4.11-412-g12a651c 12/13/2019
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x5fd2e max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00FFC00000 mask FFFFC00000 write-protect
[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
[    0.000000]   2 base 0000000000 mask FFC0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f5f20-0x000f5f2f] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x15f3f000, 0x15f3ffff] PGTABLE
[    0.000000] BRK [0x15f40000, 0x15f40fff] PGTABLE
[    0.000000] BRK [0x15f41000, 0x15f41fff] PGTABLE
[    0.000000] BRK [0x15f42000, 0x15f42fff] PGTABLE
[    0.000000] BRK [0x15f43000, 0x15f43fff] PGTABLE
[    0.000000] BRK [0x15f44000, 0x15f44fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31806000-0x34bfafff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F60F0 000024 (v02 COREv4)
[    0.000000] ACPI: XSDT 0x000000005FD310E0 000064 (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[    0.000000] ACPI: FACP 0x000000005FD32DD0 0000F4 (v04 COREv4 COREBOOT 00000000 CORE 20191018)
[    0.000000] ACPI: DSDT 0x000000005FD31280 001B43 (v02 COREv4 COREBOOT 00010001 INTL 20191018)
[    0.000000] ACPI: FACS 0x000000005FD31240 000040
[    0.000000] ACPI: FACS 0x000000005FD31240 000040
[    0.000000] ACPI: SSDT 0x000000005FD32ED0 00008A (v02 COREv4 COREBOOT 0000002A CORE 20191018)
[    0.000000] ACPI: APIC 0x000000005FD32F60 00007E (v02 COREv4 COREBOOT 00000000 CORE 20191018)
[    0.000000] ACPI: HEST 0x000000005FD32FE0 0001D0 (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[    0.000000] ACPI: SSDT 0x000000005FD331B0 0046D1 (v02 AMD    AGESA    00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x000000005FD37890 00096C (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: VFCT 0x000000005FD38200 00EA69 (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[    0.000000] ACPI: HPET 0x000000005FD46C70 000038 (v01 COREv4 COREBOOT 00000000 CORE 20191018)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000005fd2dfff]
[    0.000000] NODE_DATA(0) allocated [mem 0x5fd03000-0x5fd2dfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000005fd2dfff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000005fd2dfff]
[    0.000000] Reserved but unavailable: 820 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000005fd2dfff]
[    0.000000] On node 0 totalpages: 392396
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6069 pages used for memmap
[    0.000000]   DMA32 zone: 388398 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x818
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 386242
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-generic root=UUID=ca091366-d83f-47c0-b37a-012f03cec05f ro quiet splash vt.handoff=7
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1462808K/1569584K available (12300K kernel code, 2472K rwdata, 4260K rodata, 2408K init, 2416K bss, 106776K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 39200 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1297.600 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2595.20 BogoMIPS (lpj=5190400)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.024000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.024000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.024000] mce: CPU supports 6 MCE banks
[    0.024000] LVT offset 1 assigned for vector 0xf9
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full AMD retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.032000] smpboot: CPU0: AMD Sempron(tm) 3850 APU with Radeon(tm) R3 (family: 0x16, model: 0x0, stepping: 0x1)
[    0.032000] Performance Events: AMD PMU driver.
[    0.032000] ... version:                0
[    0.032000] ... bit width:              48
[    0.032000] ... generic registers:      4
[    0.032000] ... value mask:             0000ffffffffffff
[    0.032000] ... max period:             00007fffffffffff
[    0.032000] ... fixed-purpose events:   0
[    0.032000] ... event mask:             000000000000000f
[    0.032000] Hierarchical SRCU implementation.
[    0.032000] smp: Bringing up secondary CPUs ...
[    0.032000] x86: Booting SMP configuration:
[    0.032000] .... node  #0, CPUs:      #1
[    0.004000] do_IRQ: 1.55 No irq handler for vector
[    0.032086] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032335]  #2
[    0.004000] do_IRQ: 2.55 No irq handler for vector
[    0.034529]  #3
[    0.004000] do_IRQ: 3.55 No irq handler for vector
[    0.036136] smp: Brought up 1 node, 4 CPUs
[    0.036136] smpboot: Max logical packages: 1
[    0.036136] smpboot: Total of 4 processors activated (10380.80 BogoMIPS)
[    0.037380] devtmpfs: initialized
[    0.037380] x86/mm: Memory block size: 128MB
[    0.040543] evm: security.selinux
[    0.040545] evm: security.SMACK64
[    0.040546] evm: security.SMACK64EXEC
[    0.040548] evm: security.SMACK64TRANSMUTE
[    0.040549] evm: security.SMACK64MMAP
[    0.040550] evm: security.apparmor
[    0.040551] evm: security.ima
[    0.040553] evm: security.capability
[    0.040590] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.040590] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.040590] pinctrl core: initialized pinctrl subsystem
[    0.040590] RTC time: 16:04:47, date: 12/13/19
[    0.040630] NET: Registered protocol family 16
[    0.040868] audit: initializing netlink subsys (disabled)
[    0.040883] audit: type=2000 audit(1576253087.040:1): state=initialized audit_enabled=0 res=1
[    0.040883] cpuidle: using governor ladder
[    0.040883] cpuidle: using governor menu
[    0.040883] ACPI: bus type PCI registered
[    0.040883] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.040883] PCI: Using configuration type 1 for base access
[    0.040883] PCI: Using configuration type 1 for extended access
[    0.040883] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.040883] mtrr: probably your BIOS does not setup all CPUs.
[    0.040883] mtrr: corrected configuration.
[    0.044100] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.044100] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.044220] ACPI: Added _OSI(Module Device)
[    0.044222] ACPI: Added _OSI(Processor Device)
[    0.044224] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.044226] ACPI: Added _OSI(Processor Aggregator Device)
[    0.044229] ACPI: Added _OSI(Linux-Dell-Video)
[    0.044232] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.044234] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.048017] ACPI: Executed 2 blocks of module-level executable AML code
[    0.066206] ACPI: Interpreter enabled
[    0.066265] ACPI: (supports S0 S1 S3 S4 S5)
[    0.066267] ACPI: Using IOAPIC for interrupt routing
[    0.066300] HEST: Table parsing has been initialized.
[    0.066306] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.066460] ACPI: Enabled 9 GPEs in block 00 to 1F
[    0.079099] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.079114] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.079306] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.079505] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7 window]; [io  0x03b0-0x03df window] ignored
[    0.080051] PCI host bridge to bus 0000:00
[    0.080057] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.080061] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.080065] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.080068] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.080072] pci_bus 0000:00: root bus resource [mem 0x80000000-0xffffffff]
[    0.080077] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.080094] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
[    0.080371] pci 0000:00:01.0: [1002:9836] type 00 class 0x030000
[    0.080400] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.080414] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.080425] pci 0000:00:01.0: reg 0x20: [io  0x2000-0x20ff]
[    0.080435] pci 0000:00:01.0: reg 0x24: [mem 0xf0a00000-0xf0a3ffff]
[    0.080445] pci 0000:00:01.0: reg 0x30: [mem 0xf0a40000-0xf0a5ffff pref]
[    0.080453] pci 0000:00:01.0: enabling Extended Tags
[    0.080511] pci 0000:00:01.0: supports D1 D2
[    0.080515] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.080740] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.080767] pci 0000:00:01.1: reg 0x10: [mem 0xf0a60000-0xf0a63fff 64bit]
[    0.080803] pci 0000:00:01.1: enabling Extended Tags
[    0.080856] pci 0000:00:01.1: supports D1 D2
[    0.081062] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
[    0.081309] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[    0.081358] pci 0000:00:02.2: enabling Extended Tags
[    0.081418] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.081677] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.081701] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.081712] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.081723] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.081734] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.081745] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.081757] pci 0000:00:11.0: reg 0x24: [mem 0xf0a6b000-0xf0a6b3ff]
[    0.081807] pci 0000:00:11.0: PME# supported from D3hot
[    0.082039] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.082063] pci 0000:00:12.0: reg 0x10: [mem 0xf0a68000-0xf0a68fff]
[    0.082365] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.082390] pci 0000:00:12.2: reg 0x10: [mem 0xf0a6c000-0xf0a6c0ff]
[    0.082482] pci 0000:00:12.2: supports D1 D2
[    0.082485] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.082721] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.082745] pci 0000:00:13.0: reg 0x10: [mem 0xf0a69000-0xf0a69fff]
[    0.083046] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.083071] pci 0000:00:13.2: reg 0x10: [mem 0xf0a6d000-0xf0a6d0ff]
[    0.083163] pci 0000:00:13.2: supports D1 D2
[    0.083167] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.083395] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.083675] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.083703] pci 0000:00:14.2: reg 0x10: [mem 0xf0a64000-0xf0a67fff 64bit]
[    0.083784] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.084008] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.084303] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
[    0.084327] pci 0000:00:16.0: reg 0x10: [mem 0xf0a6a000-0xf0a6afff]
[    0.084628] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
[    0.084653] pci 0000:00:16.2: reg 0x10: [mem 0xf0a6e000-0xf0a6e0ff]
[    0.084745] pci 0000:00:16.2: supports D1 D2
[    0.084749] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.084975] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
[    0.085201] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
[    0.085422] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
[    0.085646] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
[    0.085873] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
[    0.086095] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
[    0.086415] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[    0.086451] pci 0000:01:00.0: reg 0x10: [io  0x1000-0x10ff]
[    0.086482] pci 0000:01:00.0: reg 0x18: [mem 0xf0900000-0xf0900fff 64bit]
[    0.086503] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
[    0.086622] pci 0000:01:00.0: supports D1 D2
[    0.086625] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.096036] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.096045] pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
[    0.096050] pci 0000:00:02.2:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.096058] pci 0000:00:02.2:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.097198] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
[    0.097404] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
[    0.097608] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
[    0.097812] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
[    0.098014] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
[    0.098216] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
[    0.098415] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.098618] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.099571] SCSI subsystem initialized
[    0.100046] libata version 3.00 loaded.
[    0.100080] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.100080] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.100080] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.100080] vgaarb: loaded
[    0.100086] ACPI: bus type USB registered
[    0.100126] usbcore: registered new interface driver usbfs
[    0.100148] usbcore: registered new interface driver hub
[    0.100190] usbcore: registered new device driver usb
[    0.100190] EDAC MC: Ver: 3.0.0
[    0.100190] PCI: Using ACPI for IRQ routing
[    0.100190] PCI: pci_cache_line_size set to 64 bytes
[    0.100190] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.100190] e820: reserve RAM buffer [mem 0x5fd2e000-0x5fffffff]
[    0.100412] NetLabel: Initializing
[    0.100415] NetLabel:  domain hash size = 128
[    0.100416] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.100456] NetLabel:  unlabeled traffic allowed by default
[    0.100498] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.100498] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.102221] clocksource: Switched to clocksource hpet
[    0.132418] VFS: Disk quotas dquot_6.6.0
[    0.132460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.132728] AppArmor: AppArmor Filesystem Enabled
[    0.132818] pnp: PnP ACPI init
[    0.133578] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[    0.133593] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133677] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.133859] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.134006] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.134156] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.134307] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.134798] pnp: PnP ACPI: found 6 devices
[    0.144558] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.144593] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.144598] pci 0000:00:02.2:   bridge window [io  0x1000-0x1fff]
[    0.144606] pci 0000:00:02.2:   bridge window [mem 0xf0900000-0xf09fffff]
[    0.144612] pci 0000:00:02.2:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.144624] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.144628] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.144631] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.144635] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.144638] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.144643] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.144646] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
[    0.144649] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.144799] NET: Registered protocol family 2
[    0.145262] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.145360] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.145449] TCP: Hash tables configured (established 16384 bind 16384)
[    0.145530] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.145554] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.145652] NET: Registered protocol family 1
[    0.145681] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.146396] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    0.146982] pci 0000:00:13.2: PME# does not work under D3, disabling it
[    0.147581] pci 0000:00:16.2: PME# does not work under D3, disabling it
[    0.147612] PCI: CLS 64 bytes, default 64
[    0.147718] Unpacking initramfs...
[    2.164180] Freeing initrd memory: 53204K
[    2.164345] amd_uncore: AMD NB counters detected
[    2.164364] amd_uncore: AMD LLC counters detected
[    2.164611] LVT offset 0 assigned for vector 0x400
[    2.164689] perf: AMD IBS detected (0x000000ff)
[    2.164816] Scanning for low memory corruption every 60 seconds
[    2.166499] Initialise system trusted keyrings
[    2.166519] Key type blacklist registered
[    2.166599] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    2.170170] zbud: loaded
[    2.171299] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.171679] fuse init (API version 7.26)
[    2.174993] Key type asymmetric registered
[    2.174996] Asymmetric key parser 'x509' registered
[    2.175072] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    2.175158] io scheduler noop registered
[    2.175160] io scheduler deadline registered
[    2.175234] io scheduler cfq registered (default)
[    2.176029] pcieport 0000:00:02.2: Signaling PME with IRQ 25
[    2.176206] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    2.176207] vesafb: scrolling: redraw
[    2.176211] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    2.176240] vesafb: framebuffer at 0xe0000000, mapped to 0x        (ptrval), using 3072k, total 3072k
[    2.176437] Console: switching to colour frame buffer device 128x48
[    2.176483] fb0: VESA VGA frame buffer device
[    2.176685] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.176741] ACPI: Power Button [PWRB]
[    2.176856] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    2.176895] ACPI: Power Button [PWRF]
[    2.177889] GHES: Failed to enable APEI firmware first mode.
[    2.178105] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.198606] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.204033] Linux agpgart interface v0.103
[    2.208433] loop: module loaded
[    2.208935] libphy: Fixed MDIO Bus: probed
[    2.208938] tun: Universal TUN/TAP device driver, 1.6
[    2.209030] PPP generic driver version 2.4.2
[    2.209141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.209148] ehci-pci: EHCI PCI platform driver
[    2.209482] ehci-pci 0000:00:12.2: EHCI Host Controller
[    2.209497] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    2.209507] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.209520] ehci-pci 0000:00:12.2: debug port 1
[    2.209592] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a6c000
[    2.224036] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    2.224149] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.224153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.224157] usb usb1: Product: EHCI Host Controller
[    2.224160] usb usb1: Manufacturer: Linux 4.15.0-45-generic ehci_hcd
[    2.224163] usb usb1: SerialNumber: 0000:00:12.2
[    2.224439] hub 1-0:1.0: USB hub found
[    2.224458] hub 1-0:1.0: 4 ports detected
[    2.224913] ehci-pci 0000:00:13.2: EHCI Host Controller
[    2.224926] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    2.224933] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.224945] ehci-pci 0000:00:13.2: debug port 1
[    2.224988] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a6d000
[    2.240045] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    2.240131] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.240135] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.240139] usb usb2: Product: EHCI Host Controller
[    2.240142] usb usb2: Manufacturer: Linux 4.15.0-45-generic ehci_hcd
[    2.240145] usb usb2: SerialNumber: 0000:00:13.2
[    2.240376] hub 2-0:1.0: USB hub found
[    2.240392] hub 2-0:1.0: 4 ports detected
[    2.240828] ehci-pci 0000:00:16.2: EHCI Host Controller
[    2.240840] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    2.240847] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    2.240859] ehci-pci 0000:00:16.2: debug port 1
[    2.240901] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0a6e000
[    2.256043] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    2.256134] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    2.256138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.256141] usb usb3: Product: EHCI Host Controller
[    2.256145] usb usb3: Manufacturer: Linux 4.15.0-45-generic ehci_hcd
[    2.256148] usb usb3: SerialNumber: 0000:00:16.2
[    2.256384] hub 3-0:1.0: USB hub found
[    2.256400] hub 3-0:1.0: 2 ports detected
[    2.256633] ehci-platform: EHCI generic platform driver
[    2.256657] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.256664] ohci-pci: OHCI PCI platform driver
[    2.256849] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    2.256861] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    2.256921] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0a68000
[    2.320101] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.320105] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.320108] usb usb4: Product: OHCI PCI host controller
[    2.320111] usb usb4: Manufacturer: Linux 4.15.0-45-generic ohci_hcd
[    2.320114] usb usb4: SerialNumber: 0000:00:12.0
[    2.320341] hub 4-0:1.0: USB hub found
[    2.320360] hub 4-0:1.0: 4 ports detected
[    2.320785] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    2.320801] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    2.320833] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0a69000
[    2.384107] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.384111] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.384114] usb usb5: Product: OHCI PCI host controller
[    2.384117] usb usb5: Manufacturer: Linux 4.15.0-45-generic ohci_hcd
[    2.384120] usb usb5: SerialNumber: 0000:00:13.0
[    2.384347] hub 5-0:1.0: USB hub found
[    2.384366] hub 5-0:1.0: 4 ports detected
[    2.384798] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    2.384810] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
[    2.384844] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0a6a000
[    2.448106] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.448110] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.448114] usb usb6: Product: OHCI PCI host controller
[    2.448117] usb usb6: Manufacturer: Linux 4.15.0-45-generic ohci_hcd
[    2.448120] usb usb6: SerialNumber: 0000:00:16.0
[    2.448350] hub 6-0:1.0: USB hub found
[    2.448368] hub 6-0:1.0: 2 ports detected
[    2.448601] ohci-platform: OHCI generic platform driver
[    2.448619] uhci_hcd: USB Universal Host Controller Interface driver
[    2.448780] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.449222] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.449233] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.449545] mousedev: PS/2 mouse device common for all mice
[    2.449886] rtc_cmos 00:01: RTC can wake from S4
[    2.450047] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    2.450077] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[    2.450096] i2c /dev entries driver
[    2.450108] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    2.450276] device-mapper: uevent: version 1.0.3
[    2.450447] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.450561] ledtrig-cpu: registered to indicate activity on CPUs
[    2.451478] NET: Registered protocol family 10
[    2.460755] Segment Routing with IPv6
[    2.460813] NET: Registered protocol family 17
[    2.460906] Key type dns_resolver registered
[    2.461525] RAS: Correctable Errors collector initialized.
[    2.461649] microcode: CPU0: patch_level=0x07000110
[    2.461664] microcode: CPU1: patch_level=0x07000110
[    2.461673] microcode: CPU2: patch_level=0x07000110
[    2.461689] microcode: CPU3: patch_level=0x07000110
[    2.461775] microcode: Microcode Update Driver: v2.2.
[    2.461798] sched_clock: Marking stable (2461762667, 0)->(2548531502, -86768835)
[    2.462270] registered taskstats version 1
[    2.462294] Loading compiled-in X.509 certificates
[    2.468932] Loaded X.509 cert 'Build time autogenerated kernel key: 35696836150e8814a73ddf797b531767553bb0f7'
[    2.468993] zswap: loaded using pool lzo/zbud
[    2.477313] Key type big_key registered
[    2.477324] Key type trusted registered
[    2.481345] Key type encrypted registered
[    2.481352] AppArmor: AppArmor sha1 policy hashing enabled
[    2.481358] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.481369] ima: Allocated hash algorithm: sha1
[    2.481407] evm: HMAC attrs: 0x1
[    2.481889]   Magic number: 15:224:85
[    2.482101] rtc_cmos 00:01: setting system clock to 2019-12-13 16:04:50 UTC (1576253090)
[    2.482457] acpi_cpufreq: overriding BIOS provided _PSD data
[    2.482933] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.482934] EDD information not available.
[    2.489859] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    2.491226] Freeing unused kernel memory: 2408K
[    2.520040] Write protecting the kernel read-only data: 20480k
[    2.521547] Freeing unused kernel memory: 2008K
[    2.535821] Freeing unused kernel memory: 1884K
[    2.561600] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.576039] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.587146] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.587373] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.587410] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.727319] ahci 0000:00:11.0: version 3.0
[    2.727678] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    2.727685] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio deso sadm sds 
[    2.731522] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.733057] r8169 0000:01:00.0 eth0: RTL8106e at 0x        (ptrval), b8:97:5a:85:83:94, XID 04900000 IRQ 27
[    2.733512] scsi host0: ahci
[    2.734109] scsi host1: ahci
[    2.734235] ata1: SATA max UDMA/133 abar m1024@0xf0a6b000 port 0xf0a6b100 irq 19
[    2.734240] ata2: SATA max UDMA/133 abar m1024@0xf0a6b000 port 0xf0a6b180 irq 19
[    2.753465] usb 2-2: New USB device found, idVendor=148f, idProduct=3572
[    2.753472] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.753476] usb 2-2: Product: 802.11 n WLAN
[    2.753479] usb 2-2: Manufacturer: Ralink
[    2.753482] usb 2-2: SerialNumber: 1.0
[    2.804042] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    2.863530] [drm] radeon kernel modesetting enabled.
[    2.863610] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    2.863612] fb: switching to radeondrmfb from VESA VGA
[    2.863673] Console: switching to colour dummy device 80x25
[    2.864506] [drm] initializing kernel modesetting (KABINI 0x1002:0x9836 0x1002:0x9836 0x00).
[    2.864534] [drm] doorbell mmio base: 0xF0000000
[    2.864536] [drm] doorbell mmio size: 8388608
[    2.864581] ATOM BIOS: AMD
[    2.864659] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    2.864664] radeon 0000:00:01.0: GTT: 2048M 0x0000000020000000 - 0x000000009FFFFFFF
[    2.864671] [drm] Detected VRAM RAM=512M, BAR=256M
[    2.864673] [drm] RAM width 128bits DDR
[    2.864801] [TTM] Zone  kernel: Available graphics memory: 761174 kiB
[    2.864803] [TTM] Initializing pool allocator
[    2.864814] [TTM] Initializing DMA pool allocator
[    2.864861] [drm] radeon: 512M of VRAM memory ready
[    2.864863] [drm] radeon: 2048M of GTT memory ready.
[    2.864879] [drm] Loading kabini Microcode
[    2.865132] [drm] Internal thermal controller without fan control
[    2.866716] [drm] radeon: dpm initialized
[    2.866894] [drm] Found UVD firmware Version: 1.55 Family ID: 9
[    2.870049] [drm] Found VCE firmware/feedback version 40.2.2 / 15!
[    2.870070] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    2.886388] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000).
[    2.886644] radeon 0000:00:01.0: WB enabled
[    2.886665] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0x        (ptrval)
[    2.886670] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0x        (ptrval)
[    2.886674] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0x        (ptrval)
[    2.886678] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0x        (ptrval)
[    2.886682] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0x        (ptrval)
[    2.887564] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x00000000000782b0 and cpu addr 0x        (ptrval)
[    2.887903] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000020000c18 and cpu addr 0x        (ptrval)
[    2.887907] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000020000c1c and cpu addr 0x        (ptrval)
[    2.887912] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.887913] [drm] Driver supports precise vblank timestamp query.
[    2.888005] radeon 0000:00:01.0: radeon: using MSI.
[    2.888067] [drm] radeon: irq initialized.
[    2.891184] [drm] ring test on 0 succeeded in 3 usecs
[    2.891280] [drm] ring test on 1 succeeded in 3 usecs
[    2.891309] [drm] ring test on 2 succeeded in 3 usecs
[    2.891559] [drm] ring test on 3 succeeded in 4 usecs
[    2.891568] [drm] ring test on 4 succeeded in 4 usecs
[    2.937270] [drm] ring test on 5 succeeded in 1 usecs
[    2.957137] [drm] UVD initialized successfully.
[    3.054367] ata2: SATA link down (SStatus 0 SControl 300)
[    3.066368] [drm] ring test on 6 succeeded in 16 usecs
[    3.066380] [drm] ring test on 7 succeeded in 3 usecs
[    3.066382] [drm] VCE initialized successfully.
[    3.067469] [drm] ib test on ring 0 succeeded in 0 usecs
[    3.168070] tsc: Refined TSC clocksource calibration: 1297.649 MHz
[    3.168081] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x12b47125985, max_idle_ns: 440795238018 ns
[    3.208075] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.208259] ata1.00: ATA-9: ADATA SP600, 2.4, max UDMA/100
[    3.208263] ata1.00: 62533296 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.208535] ata1.00: configured for UDMA/100
[    3.208930] scsi 0:0:0:0: Direct-Access     ATA      ADATA SP600      2.4  PQ: 0 ANSI: 5
[    3.209518] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.209749] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    3.209795] sd 0:0:0:0: [sda] Write Protect is off
[    3.209800] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.209884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.211023]  sda: sda1 sda2 < sda5 >
[    3.211987] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.584106] [drm] ib test on ring 1 succeeded in 0 usecs
[    4.096091] [drm] ib test on ring 2 succeeded in 0 usecs
[    4.096160] [drm] ib test on ring 3 succeeded in 0 usecs
[    4.096221] [drm] ib test on ring 4 succeeded in 0 usecs
[    4.157092] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[    4.192184] clocksource: Switched to clocksource tsc
[    4.640087] [drm] ib test on ring 5 succeeded
[    4.663674] [drm] ib test on ring 6 succeeded
[    4.666493] [drm] ib test on ring 7 succeeded
[    4.668011] [drm] Radeon Display Connectors
[    4.668014] [drm] Connector 0:
[    4.668015] [drm]   HDMI-A-1
[    4.668016] [drm]   HPD1
[    4.668021] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[    4.668022] [drm]   Encoders:
[    4.668023] [drm]     DFP1: INTERNAL_UNIPHY
[    4.668025] [drm] Connector 1:
[    4.668026] [drm]   HDMI-A-2
[    4.668028] [drm]   HPD2
[    4.668043] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[    4.668044] [drm]   Encoders:
[    4.668046] [drm]     DFP2: INTERNAL_UNIPHY
[    4.668047] [drm] Connector 2:
[    4.668049] [drm]   VGA-1
[    4.668052] [drm]   DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc
[    4.668053] [drm]   Encoders:
[    4.668055] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    4.834129] [drm] fb mappable at 0xE0722000
[    4.834131] [drm] vram apper at 0xE0000000
[    4.834133] [drm] size 3145728
[    4.834134] [drm] fb depth is 24
[    4.834135] [drm]    pitch is 4096
[    4.834251] fbcon: radeondrmfb (fb0) is primary device
[    4.834399] Console: switching to colour frame buffer device 128x48
[    4.834449] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
[    4.855645] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
[    4.956447] [drm] amdgpu kernel modesetting enabled.
[    4.989516] random: fast init done
[    5.046948] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.220115] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.240338] systemd[1]: Detected architecture x86-64.
[    5.240599] systemd[1]: Set hostname to <BiostarTest>.
[    5.350731] systemd[1]: Created slice User and Session Slice.
[    5.350916] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.351038] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.351440] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.351556] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.351630] systemd[1]: Listening on udev Kernel Socket.
[    5.351738] systemd[1]: Listening on Journal Socket.
[    5.375908] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.409734] lp: driver loaded but no devices found
[    5.418653] ppdev: user-space parallel port driver
[    5.424092] parport_pc 00:05: reported by Plug and Play ACPI
[    5.424181] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[    5.476803] systemd-journald[251]: Received request to flush runtime journal from PID 1
[    5.520247] lp0: using parport0 (interrupt-driven).
[    5.967283] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    5.967290] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[    5.967927] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    6.000512] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.169599] AVX version of gcm_enc/dec engaged.
[    6.169603] AES CTR mode by8 optimization enabled
[    6.371397] kvm: Nested Virtualization enabled
[    6.371403] kvm: Nested Paging enabled
[    6.377995] MCE: In-kernel MCE decoding enabled.
[    6.397768] EDAC amd64: Node 0: DRAM ECC disabled.
[    6.397773] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    6.425879] audit: type=1400 audit(1576253094.438:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=598 comm="apparmor_parser"
[    6.425891] audit: type=1400 audit(1576253094.438:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=598 comm="apparmor_parser"
[    6.425899] audit: type=1400 audit(1576253094.438:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=598 comm="apparmor_parser"
[    6.425905] audit: type=1400 audit(1576253094.438:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=598 comm="apparmor_parser"
[    6.426466] audit: type=1400 audit(1576253094.438:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=597 comm="apparmor_parser"
[    6.426475] audit: type=1400 audit(1576253094.438:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=597 comm="apparmor_parser"
[    6.439362] audit: type=1400 audit(1576253094.450:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=601 comm="apparmor_parser"
[    6.439377] audit: type=1400 audit(1576253094.450:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=601 comm="apparmor_parser"
[    6.439405] EDAC amd64: Node 0: DRAM ECC disabled.
[    6.439409] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    6.440883] audit: type=1400 audit(1576253094.454:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=605 comm="apparmor_parser"
[    6.443515] audit: type=1400 audit(1576253094.454:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=604 comm="apparmor_parser"
[    6.448901] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[    6.485682] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[    6.485845] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
[    6.492484] snd_hda_codec_realtek hdaudioC1D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    6.492496] snd_hda_codec_realtek hdaudioC1D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.492501] snd_hda_codec_realtek hdaudioC1D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    6.492504] snd_hda_codec_realtek hdaudioC1D2:    mono: mono_out=0x0
[    6.492507] snd_hda_codec_realtek hdaudioC1D2:    inputs:
[    6.492512] snd_hda_codec_realtek hdaudioC1D2:      Front Mic=0x19
[    6.492516] snd_hda_codec_realtek hdaudioC1D2:      Rear Mic=0x18
[    6.492520] snd_hda_codec_realtek hdaudioC1D2:      Line=0x1a
[    6.507989] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[    6.508286] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[    6.508444] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[    6.508600] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[    6.508752] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[    6.596422] Adding 998396k swap on /dev/sda5.  Priority:-2 extents:1 across:998396k SSFS
[    7.158885] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    7.372129] r8169 0000:01:00.0 enp1s0: link down
[    7.372224] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[    7.372558] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    7.380074] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    7.576067] usb 2-2: reset high-speed USB device number 2 using ehci-pci
[    7.741190] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3572, rev 0223 detected
[    7.769683] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0009 detected
[    7.780870] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    7.781773] usbcore: registered new interface driver rt2800usb
[    7.791211] rt2800usb 2-2:1.0 wlx000da318432a: renamed from wlan0
[    7.857702] IPv6: ADDRCONF(NETDEV_UP): wlx000da318432a: link is not ready
[    7.857856] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[    7.859884] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[    8.177090] IPv6: ADDRCONF(NETDEV_UP): wlx000da318432a: link is not ready
[    8.243583] IPv6: ADDRCONF(NETDEV_UP): wlx000da318432a: link is not ready
[   19.285421] random: crng init done
[   19.285428] random: 7 urandom warning(s) missed due to ratelimiting
[   27.882509] wlx000da318432a: authenticate with 4c:5e:0c:69:99:61
[   27.950064] wlx000da318432a: send auth to 4c:5e:0c:69:99:61 (try 1/3)
[   27.951767] wlx000da318432a: authenticated
[   27.956070] wlx000da318432a: associate with 4c:5e:0c:69:99:61 (try 1/3)
[   27.961397] wlx000da318432a: RX AssocResp from 4c:5e:0c:69:99:61 (capab=0x431 status=0 aid=3)
[   27.969270] wlx000da318432a: associated
[   28.031190] IPv6: ADDRCONF(NETDEV_CHANGE): wlx000da318432a: link becomes ready