[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-61-generic (root@devel.trisquel.info) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1trisquel1 SMP Mon May 12 07:09:15 UTC 2014 (Ubuntu 3.2.0-61.93+6.0.1trisquel1-generic 3.2.55-gnu)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000000f7b0000 (usable)
[    0.000000]  BIOS-e820: 000000000f7b0000 - 000000000f7e0000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: PC Engines ALIX.1C/ALIX.1C, BIOS GNUtoo@no-log.org 08/13/2014
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0xf7b0 max_arch_pfn = 0x100000
[    0.000000] initial memory mapped : 0 - 01c00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-000000000f7b0000
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 000f400000 page 2M
[    0.000000]  000f400000 - 000f7b0000 page 4k
[    0.000000] kernel direct mapping tables up to f7b0000 @ 1bf8000-1c00000
[    0.000000] RAMDISK: 0e2e6000 - 0f05f000
[    0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 247MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0f7b0000
[    0.000000]   low ram: 0 - 0f7b0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0000f7b0
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0000f7b0
[    0.000000] On node 0 totalpages: 63295
[    0.000000] free_area_init_node: node 0, pgdat c1817d80, node_mem_map cf5bf200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 464 pages used for memmap
[    0.000000]   Normal zone: 58848 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present or hardware disabled
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at f7e0000 (gap: f7e0000:f0820000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @cf5ae000 s31616 r0 d21632 u53248
[    0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 62799
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-61-generic root=/dev/mapper/alix--vg-root ro console=ttyS0,115200 quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 1014272 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 226152k/253632k available (5641k kernel code, 27028k reserved, 2695k data, 716k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xcffb0000 - 0xff7fe000   ( 760 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xcf7b0000   ( 247 MB)
[    0.000000]       .init : 0xc1825000 - 0xc18d8000   ( 716 kB)
[    0.000000]       .data : 0xc15826c4 - 0xc18244c0   (2695 kB)
[    0.000000]       .text : 0xc1000000 - 0xc15826c4   (5641 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=cdc08000 soft=cdc0a000
[    0.000000] WARNING: Persistent clock returned invalid value!
[    0.000000]          Check your CMOS/BIOS settings.
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 498.039 MHz processor.
[    0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.07 BogoMIPS (lpj=1992156)
[    0.004046] pid_max: default: 32768 minimum: 301
[    0.004219] Security Framework initialized
[    0.004344] AppArmor: AppArmor initialized
[    0.004360] Yama: becoming mindful.
[    0.004746] Mount-cache hash table entries: 512
[    0.008218] Initializing cgroup subsys cpuacct
[    0.008269] Initializing cgroup subsys memory
[    0.008319] Initializing cgroup subsys devices
[    0.008338] Initializing cgroup subsys freezer
[    0.008356] Initializing cgroup subsys blkio
[    0.008394] Initializing cgroup subsys perf_event
[    0.008635] SMP alternatives: switching to UP code
[    0.034692] Freeing SMP alternatives: 24k freed
[    0.034745] ftrace: allocating 25525 entries in 50 pages
[    0.040217] weird, boot CPU (#0) not listed by the BIOS.
[    0.040235] SMP motherboard not detected.
[    0.040249] Local APIC not detected. Using dummy APIC emulation.
[    0.040265] SMP disabled
[    0.040278] Performance Events: no PMU driver, software events only.
[    0.040936] NMI watchdog disabled (cpu0): hardware events not enabled
[    0.041028] Brought up 1 CPUs
[    0.041046] Total of 1 processors activated (996.07 BogoMIPS).
[    0.044913] devtmpfs: initialized
[    0.045694] EVM: security.selinux
[    0.045708] EVM: security.SMACK64
[    0.045722] EVM: security.capability
[    0.056281] print_constraints: dummy: 
[    0.056388] RTC time: 20:05:50, date: 12/01/99
[    0.056639] NET: Registered protocol family 16
[    0.057511] EISA bus registered
[    0.059309] PCI: PCI BIOS revision 2.10 entry at 0xfd4b7, last bus=0
[    0.059328] PCI: Using configuration type 1 for base access
[    0.069498] bio: create slab <bio-0> at 0
[    0.070054] ACPI: Interpreter disabled.
[    0.070494] vgaarb: loaded
[    0.071418] i2c-core: driver [aat2870] using legacy suspend method
[    0.071436] i2c-core: driver [aat2870] using legacy resume method
[    0.071993] SCSI subsystem initialized
[    0.072288] libata version 3.00 loaded.
[    0.072636] usbcore: registered new interface driver usbfs
[    0.072729] usbcore: registered new interface driver hub
[    0.072897] usbcore: registered new device driver usb
[    0.073528] PCI: Probing PCI hardware
[    0.073545] PCI: Probing PCI hardware (bus 00)
[    0.073903] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600
[    0.074048] pci 0000:00:01.0: reg 10: [io  0xac1c-0xac1f]
[    0.074893] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300
[    0.075171] pci 0000:00:01.1: reg 10: [mem 0xfd000000-0xfdffffff]
[    0.075372] pci 0000:00:01.1: reg 14: [mem 0xfe010000-0xfe013fff]
[    0.075571] pci 0000:00:01.1: reg 18: [mem 0xfe014000-0xfe017fff]
[    0.075771] pci 0000:00:01.1: reg 1c: [mem 0xfe018000-0xfe01bfff]
[    0.075971] pci 0000:00:01.1: reg 20: [mem 0xfe01c000-0xfe01ffff]
[    0.076683] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010
[    0.076928] pci 0000:00:01.2: reg 10: [mem 0xfe020000-0xfe023fff]
[    0.078193] pci 0000:00:0c.0: [1814:0201] type 0 class 0x000280
[    0.078238] pci 0000:00:0c.0: reg 10: [mem 0xfe024000-0xfe025fff]
[    0.078395] pci 0000:00:0d.0: [1106:3053] type 0 class 0x000200
[    0.078440] pci 0000:00:0d.0: reg 10: [io  0x1000-0x10ff]
[    0.078474] pci 0000:00:0d.0: reg 14: [mem 0xfe02b000-0xfe02b0ff]
[    0.078586] pci 0000:00:0d.0: supports D1 D2
[    0.078606] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.078632] pci 0000:00:0d.0: PME# disabled
[    0.078687] pci 0000:00:0e.0: [168c:001a] type 0 class 0x000200
[    0.078732] pci 0000:00:0e.0: reg 10: [mem 0xfe000000-0xfe00ffff]
[    0.078977] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601
[    0.079292] pci 0000:00:0f.0: reg 10: [io  0x1cb0-0x1cb7]
[    0.079559] pci 0000:00:0f.0: reg 14: [io  0x1400-0x14ff]
[    0.079826] pci 0000:00:0f.0: reg 18: [io  0x1c00-0x1c3f]
[    0.080126] pci 0000:00:0f.0: reg 1c: [io  0x1c80-0x1c9f]
[    0.080399] pci 0000:00:0f.0: reg 20: [io  0x1800-0x187f]
[    0.080684] pci 0000:00:0f.0: reg 24: [io  0x1c40-0x1c7f]
[    0.081284] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101
[    0.082196] pci 0000:00:0f.2: reg 20: [io  0x1ca0-0x1caf]
[    0.082854] pci 0000:00:0f.3: [1022:2093] type 0 class 0x000401
[    0.083115] pci 0000:00:0f.3: reg 10: [io  0x1880-0x18ff]
[    0.084484] pci 0000:00:0f.4: [1022:2094] type 0 class 0x000c03
[    0.084834] pci 0000:00:0f.4: reg 10: [mem 0xfe028000-0xfe028fff]
[    0.086351] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.086421] pci 0000:00:0f.4: PME# disabled
[    0.086697] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03
[    0.087039] pci 0000:00:0f.5: reg 10: [mem 0xfe029000-0xfe029fff]
[    0.088549] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.088618] pci 0000:00:0f.5: PME# disabled
[    0.089185] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=mem,locks=none
[    0.092121] PCI: pci_cache_line_size set to 32 bytes
[    0.092624] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.092646] reserve RAM buffer: 000000000f7b0000 - 000000000fffffff 
[    0.093365] NetLabel: Initializing
[    0.093380] NetLabel:  domain hash size = 128
[    0.093394] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.093465] NetLabel:  unlabeled traffic allowed by default
[    0.093887] Switching to clocksource pit
[    0.146600] AppArmor: AppArmor Filesystem Enabled
[    0.146706] pnp: PnP ACPI: disabled
[    0.146724] PnPBIOS: Scanning system for PnP BIOS support...
[    0.146896] PnPBIOS: Found PnP BIOS installation structure at 0xc00f6f70
[    0.146923] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xd40c, dseg 0xf0000
[    0.148441] PnPBIOS: dev_node_info: function not supported on this system
[    0.148458] PnPBIOS: Unable to get node info.  Aborting.
[    0.162873] PCI: max bus depth: 0 pci_try_num: 1
[    0.162929] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.162953] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[    0.163229] NET: Registered protocol family 2
[    0.163643] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.165083] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.165299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.165502] TCP: Hash tables configured (established 8192 bind 8192)
[    0.165521] TCP reno registered
[    0.165541] UDP hash table entries: 128 (order: 0, 4096 bytes)
[    0.165584] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[    0.166005] NET: Registered protocol family 1
[    0.166203] pci 0000:00:01.1: Boot video device
[    0.166863] PCI: CLS 64 bytes, default 32
[    0.167315] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.183883] Trying to unpack rootfs image as initramfs...
[    0.207963] audit: initializing netlink socket (disabled)
[    0.208018] type=2000 audit(0.204:1): initialized
[    0.575460] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.610627] VFS: Disk quotas dquot_6.5.2
[    0.611144] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.622019] fuse init (API version 7.17)
[    0.622849] msgmni has been set to 441
[    0.640299] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.640531] io scheduler noop registered
[    0.640548] io scheduler deadline registered
[    0.640600] io scheduler cfq registered (default)
[    0.641463] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.641633] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.642890] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.647712] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.647860] isapnp: Scanning for PnP cards...
[    0.654286] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    0.719891] Linux agpgart interface v0.103
[    0.787730] brd: module loaded
[    0.802070] loop: module loaded
[    0.806817] Fixed MDIO Bus: probed
[    0.807012] tun: Universal TUN/TAP device driver, 1.6
[    0.807029] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.807341] PPP generic driver version 2.4.2
[    0.811104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.811407] ehci_hcd 0000:00:0f.5: setting latency timer to 64
[    0.811451] ehci_hcd 0000:00:0f.5: EHCI Host Controller
[    0.811746] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1
[    0.835299] ehci_hcd 0000:00:0f.5: cache line size of 64 is not supported
[    0.835360] ehci_hcd 0000:00:0f.5: irq 9, io mem 0xfe029000
[    0.887065] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[    0.968776] hub 1-0:1.0: USB hub found
[    0.968812] hub 1-0:1.0: 4 ports detected
[    0.969278] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.969569] ohci_hcd 0000:00:0f.4: setting latency timer to 64
[    0.969613] ohci_hcd 0000:00:0f.4: OHCI Host Controller
[    0.969942] ohci_hcd 0000:00:0f.4: new USB bus registered, assigned bus number 2
[    0.970019] ohci_hcd 0000:00:0f.4: irq 9, io mem 0xfe028000
[    1.093111] hub 2-0:1.0: USB hub found
[    1.093201] hub 2-0:1.0: 4 ports detected
[    1.093639] uhci_hcd: USB Universal Host Controller Interface driver
[    1.094202] usbcore: registered new interface driver libusual
[    1.094414] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.096911] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.096949] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.097836] mousedev: PS/2 mouse device common for all mice
[    1.103646] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    1.103724] rtc0: alarms up to one day, 114 bytes nvram
[    1.104281] device-mapper: uevent: version 1.0.3
[    1.104848] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    1.105026] EISA: Probing bus 0 at eisa.0
[    1.105059] Cannot allocate resource for EISA slot 1
[    1.105166] EISA: Detected 0 cards.
[    1.105218] cpufreq-nforce2: No nForce2 chipset.
[    1.105236] cpuidle: using governor ladder
[    1.105253] cpuidle: using governor menu
[    1.105269] EFI Variables Facility v0.08 2004-May-17
[    1.107399] TCP cubic registered
[    1.108738] NET: Registered protocol family 10
[    1.162827] NET: Registered protocol family 17
[    1.162862] Registering the dns_resolver key type
[    1.163006] Using IPI No-Shortcut mode
[    1.166644] PM: Hibernation image not present or could not be loaded.
[    1.166710] registered taskstats version 1
[    1.189336] Switching to clocksource tsc
[    1.339212] isapnp: No Plug & Play device found
[    3.491658] Freeing initrd memory: 13796k freed
[    3.546080]   Magic number: 15:750:92
[    3.546297] rtc_cmos rtc_cmos: setting system clock to 1999-12-01 20:05:54 UTC (944078754)
[    3.546459] powernow-k8: Processor cpuid 5a2 not supported
[    3.546483] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.546499] EDD information not available.
[    3.547295] spurious 8259A interrupt: IRQ7.
[    3.547438] Freeing unused kernel memory: 716k freed
[    3.548547] Write protecting the kernel text: 5644k
[    3.548889] Write protecting the kernel read-only data: 2252k
[    3.666479] udevd[82]: starting version 175
[    4.292294] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    4.384618] via-rhine 0000:00:0d.0: eth0: VIA Rhine III (Management Adapter) at 0xfe02b000, 00:0d:b9:0c:d5:34, IRQ 10
[    4.385368] via-rhine 0000:00:0d.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1
[    4.385472] pata_amd 0000:00:0f.2: version 0.4.1
[    4.394528] scsi0 : pata_amd
[    4.398526] scsi1 : pata_amd
[    4.398952] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1ca0 irq 14
[    4.398977] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1ca8 irq 15
[    4.570858] ata1.00: CFA: LEXAR ATA FLASH CARD, 20100930, max UDMA/66
[    4.570889] ata1.00: 15630048 sectors, multi 0: LBA 
[    4.586774] ata1.00: configured for UDMA/66
[    4.587521] scsi 0:0:0:0: Direct-Access     ATA      LEXAR ATA FLASH  2010 PQ: 0 ANSI: 5
[    4.588789] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.589533] ata2: port disabled--ignoring
[    4.589786] sd 0:0:0:0: [sda] 15630048 512-byte logical blocks: (8.00 GB/7.45 GiB)
[    4.590101] sd 0:0:0:0: [sda] Write Protect is off
[    4.590126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.590266] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    4.593058]  sda: sda1 sda2 < sda5 >
[    4.596999] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    7.206599] Btrfs loaded
[    7.249416] xor: measuring software checksum speed
[    7.266644]    8regs     :   394.000 MB/sec
[    7.286631]    8regs_prefetch:   325.000 MB/sec
[    7.306633]    32regs    :   226.000 MB/sec
[    7.326651]    32regs_prefetch:   188.000 MB/sec
[    7.346641]    pII_mmx   :   853.000 MB/sec
[    7.366638]    p5_mmx    :   673.000 MB/sec
[    7.366656] xor: using function: pII_mmx (853.000 MB/sec)
[    7.373447] device-mapper: dm-raid45: initialized v0.2594b
[    7.384510] md: linear personality registered for level -1
[    7.395886] md: multipath personality registered for level -4
[    7.407109] md: raid0 personality registered for level 0
[    7.420022] md: raid1 personality registered for level 1
[    7.431299] async_tx: api initialized (async)
[    7.507620] raid6: int32x1     65 MB/s
[    7.574714] raid6: int32x2     74 MB/s
[    7.643596] raid6: int32x4     66 MB/s
[    7.710782] raid6: int32x8     69 MB/s
[    7.779014] raid6: mmxx1      154 MB/s
[    7.846885] raid6: mmxx2      228 MB/s
[    7.914879] raid6: sse1x1     155 MB/s
[    7.982739] raid6: sse1x2     220 MB/s
[    7.982755] raid6: using algorithm sse1x2 (220 MB/s)
[    7.994175] md: raid6 personality registered for level 6
[    7.994198] md: raid5 personality registered for level 5
[    7.994216] md: raid4 personality registered for level 4
[    8.027790] md: raid10 personality registered for level 10
[    8.281511] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   10.663544] Adding 389116k swap on /dev/mapper/alix--vg-swap_1.  Priority:-1 extents:1 across:389116k 
[   10.703239] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   11.910167] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.183677] udevd[456]: starting version 175
[   12.651175] lp: driver loaded but no devices found
[   13.293484] AMD Geode RNG detected
[   13.507259] geode-aes: GEODE AES engine enabled.
[   13.583715] cs5535-gpio cs5535-gpio: reserved resource region [io  0x1400-0x14ff]
[   13.584051] cs5535-gpio cs5535-gpio: GPIO support successfully loaded.
[   13.595714] cs5535-mfd 0000:00:0f.0: 5 devices registered.
[   14.057054] cfg80211: Calling CRDA to update world regulatory domain
[   14.071731] type=1400 audit(944078765.024:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=546 comm="apparmor_parser"
[   14.079437] type=1400 audit(944078765.032:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser"
[   14.090018] type=1400 audit(944078765.040:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser"
[   14.622379] via-rhine 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   15.615442] device-mapper: multipath: version 1.3.2 loaded
[   17.659791] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered
[   17.716306] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   17.716340] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716365] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   17.716394] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716418] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   17.716447] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716471] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   17.716500] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716524] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   17.716624] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716649] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   17.716678] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716702] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   17.716731] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716755] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   17.716784] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716808] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   17.716837] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716861] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   17.716890] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716914] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   17.716943] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.716967] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   17.716997] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.717021] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   17.717050] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
[   17.717074] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   17.717103] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
[   17.770279] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   17.808798] Registered led device: rt2500pci-phy0::radio
[   17.810645] Registered led device: rt2500pci-phy0::quality
[   17.925691] snd_cs5535audio 0000:00:0f.3: setting latency timer to 64
[   18.113456] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.113492] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113517] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.113546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113570] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.113599] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113623] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.113652] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113676] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.113705] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113730] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.113759] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113783] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.113812] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113836] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.113865] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113889] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.113918] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113942] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.113971] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.113996] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.114025] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.114049] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.114078] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.114102] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.114131] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.114156] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.114185] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.114213] cfg80211: World regulatory domain updated:
[   18.114229] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.114256] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.114283] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.114309] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.114336] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.114363] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.239040] ath5k 0000:00:0e.0: registered as 'phy1'
[   18.898039] ath: EEPROM regdomain: 0x20
[   18.898059] ath: EEPROM indicates we should expect a direct regpair map
[   18.898085] ath: Country alpha2 being used: 00
[   18.898101] ath: Regpair used: 0x20
[   18.898123] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.898154] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898177] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.898206] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898229] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.898258] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898282] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.898311] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898334] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.898363] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898386] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.898415] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898438] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.898467] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898490] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.898519] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898542] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.898571] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898595] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.898624] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898647] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.898676] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   18.898699] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.898724] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.898749] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[   18.904238] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.904272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904297] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.904326] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904350] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.904379] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904403] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.904432] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904456] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.904485] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904509] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.904538] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904562] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.904591] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904615] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.904644] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904668] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.904697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904721] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.904751] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904775] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.904804] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.904828] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.904857] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.904881] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.904910] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.904935] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.904964] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.906024] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[   18.921556] ath5k phy1: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[   18.953782] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   18.953817] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.953842] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   18.953871] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.953895] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   18.953924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.953948] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   18.953977] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954001] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   18.954031] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954055] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   18.954084] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954108] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   18.954137] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954161] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   18.954190] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954214] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   18.954243] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954267] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   18.954296] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954320] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   18.954350] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.954374] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   18.954403] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.954427] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   18.954456] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.954480] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[   18.954510] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   19.092465] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.528367] init: udev-fallback-graphics main process (814) terminated with status 1
[   20.125787] init: failsafe main process (699) killed by TERM signal
[   20.370076] type=1400 audit(944078771.320:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=900 comm="apparmor_parser"
[   20.375571] type=1400 audit(944078771.324:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=900 comm="apparmor_parser"
[   20.378840] type=1400 audit(944078771.328:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=900 comm="apparmor_parser"
[   22.868282] cfg80211: Calling CRDA for country: FR
[   23.022755] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   23.022792] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.022816] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   23.022845] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.022868] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   23.022897] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.022920] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   23.022949] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.022972] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   23.023001] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023024] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   23.023053] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023076] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   23.023106] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023129] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   23.023158] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023181] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   23.023210] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023233] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   23.023262] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023285] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   23.023314] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023337] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   23.023366] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023389] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   23.023418] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023439] cfg80211: Disabling freq 2484 MHz
[   23.023469] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[   23.023499] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023522] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[   23.023551] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023574] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[   23.023603] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023626] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[   23.023655] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023679] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[   23.023708] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023731] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[   23.023760] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023783] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[   23.023812] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023835] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[   23.023864] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.023955] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[   23.023985] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.024008] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[   23.024037] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.024060] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[   23.024089] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.024112] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[   23.024141] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.024164] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[   23.024193] cfg80211: 2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[   23.024214] cfg80211: Disabling freq 2484 MHz
[   23.024238] cfg80211: Regulatory domain changed to country: FR
[   23.024256] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   23.024281] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   23.024306] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   23.024331] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   23.024355] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   24.768039] eth0: no IPv6 routers present
[   33.264719] wlan0: no IPv6 routers present
[  139.608497] init: ttyS0 main process ended, respawning