[    0.000000] random: get_random_bytes called from start_kernel+0x3d/0x456 with crng_init=0
[    0.000000] Linux version 4.13.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20171010 (Debian 6.4.0-8)) #1 SMP Debian 4.13.4-2 (2017-10-15)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fefafff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fefb000-0x000000007fffffff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000046f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 23539LU/23539LU, BIOS CBET4000 4.6-2035-g5bcb23ebbb 11/07/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x46f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7fefb max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff9f1680099000] 99000 size 24576
[    0.000000] BRK [0x26df57000, 0x26df57fff] PGTABLE
[    0.000000] BRK [0x26df58000, 0x26df58fff] PGTABLE
[    0.000000] BRK [0x26df59000, 0x26df59fff] PGTABLE
[    0.000000] BRK [0x26df5a000, 0x26df5afff] PGTABLE
[    0.000000] BRK [0x26df5b000, 0x26df5bfff] PGTABLE
[    0.000000] BRK [0x26df5c000, 0x26df5cfff] PGTABLE
[    0.000000] BRK [0x26df5d000, 0x26df5dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x356bb000-0x36b54fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF0D0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF10940 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF0D280 0036BF (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF0D240 000040
[    0.000000] ACPI: FACS 0x000000007FF0D240 000040
[    0.000000] ACPI: SSDT 0x000000007FF10A40 0018AD (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF122F0 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF12330 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF12370 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF123E0 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF14490 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000046f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x46f5ee000-0x46f5f2fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000046f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007fefafff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000046f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000046f5fffff]
[    0.000000] On node 0 totalpages: 4125850
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8124 pages used for memmap
[    0.000000]   DMA32 zone: 519931 pages, LIFO batch:31
[    0.000000]   Normal zone: 56280 pages used for memmap
[    0.000000]   Normal zone: 3601920 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fefb000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 38 pages/cpu @ffff9f1aef200000 s115224 r8192 d32232 u524288
[    0.000000] pcpu-alloc: s115224 r8192 d32232 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4061360
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16141720K/16503400K available (6587K kernel code, 1153K rwdata, 2964K rodata, 1472K init, 696K bss, 361680K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 28602 entries in 112 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2594.015 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.03 BogoMIPS (lpj=10376060)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.009282] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009320] Security Framework initialized
[    0.009322] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009327] AppArmor: AppArmor disabled by boot time parameter
[    0.011877] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.013188] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.013287] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.013467] CPU: Physical Processor ID: 0
[    0.013467] CPU: Processor Core ID: 0
[    0.013474] mce: CPU supports 7 MCE banks
[    0.013481] CPU0: Thermal monitoring enabled (TM1)
[    0.013489] process: using mwait in idle threads
[    0.013491] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.013492] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.013586] Freeing SMP alternatives memory: 28K
[    0.014793] smpboot: Max logical packages: 2
[    0.014797] DMAR: Host address width 36
[    0.014799] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.014806] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.014807] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.014810] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.014812] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.014812] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.014813] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.015093] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.015094] x2apic enabled
[    0.015099] Switched APIC routing to cluster x2apic.
[    0.015560] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055259] TSC deadline timer enabled
[    0.055261] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.055336] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.055356] ... version:                3
[    0.055357] ... bit width:              48
[    0.055357] ... generic registers:      4
[    0.055358] ... value mask:             0000ffffffffffff
[    0.055358] ... max period:             00007fffffffffff
[    0.055358] ... fixed-purpose events:   3
[    0.055359] ... event mask:             000000070000000f
[    0.055393] Hierarchical SRCU implementation.
[    0.055815] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.055830] smp: Bringing up secondary CPUs ...
[    0.055912] x86: Booting SMP configuration:
[    0.055912] .... node  #0, CPUs:      #1 #2 #3
[    0.294022] smp: Brought up 1 node, 4 CPUs
[    0.294022] smpboot: Total of 4 processors activated (20756.06 BogoMIPS)
[    0.296392] devtmpfs: initialized
[    0.296392] x86/mm: Memory block size: 128MB
[    0.297220] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.297220] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.297220] pinctrl core: initialized pinctrl subsystem
[    0.297220] NET: Registered protocol family 16
[    0.297220] cpuidle: using governor ladder
[    0.297220] cpuidle: using governor menu
[    0.297220] PCCT header not found.
[    0.297220] ACPI: bus type PCI registered
[    0.297220] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.297220] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.297220] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.297220] PCI: Using configuration type 1 for base access
[    0.297220] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.297220] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.297220] ACPI: Added _OSI(Module Device)
[    0.297220] ACPI: Added _OSI(Processor Device)
[    0.297220] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.297220] ACPI: Added _OSI(Processor Aggregator Device)
[    0.297220] ACPI: Executed 1 blocks of module-level executable AML code
[    0.301374] ACPI: EC: EC started
[    0.301374] ACPI: EC: interrupt blocked
[    0.301418] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.301419] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.301420] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.301421] ACPI: Interpreter enabled
[    0.301437] ACPI: (supports S0 S3 S4 S5)
[    0.301438] ACPI: Using IOAPIC for interrupt routing
[    0.301455] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.305391] ACPI: Power Resource [FPWR] (off)
[    0.305802] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.305806] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.305850] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.305859] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.306034] PCI host bridge to bus 0000:00
[    0.306036] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306037] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306038] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306039] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.306040] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.306041] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.306042] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.306043] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.306044] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.306045] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.306046] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.306047] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.306048] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.306049] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.306050] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.306051] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306053] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xf7ffffff window]
[    0.306054] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.306055] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306062] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.306139] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.306168] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.306226] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.306236] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.306242] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.306246] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.306311] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.306320] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit]
[    0.306404] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.306426] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit]
[    0.306493] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.306556] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.306575] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
[    0.306583] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff]
[    0.306591] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.306648] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.306704] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.306726] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff]
[    0.306807] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.306869] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.306890] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit]
[    0.306960] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.307032] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[    0.307168] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.307249] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[    0.307385] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.307468] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.307490] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff]
[    0.307570] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.307632] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.307792] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.307811] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.307819] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.307827] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.307835] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.307843] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.307851] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff]
[    0.307894] pci 0000:00:1f.2: PME# supported from D3hot
[    0.307951] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.307970] pci 0000:00:1f.3: reg 0x10: [mem 0xf1940000-0xf19400ff 64bit]
[    0.307989] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.308085] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.308176] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.308231] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
[    0.308314] pci 0000:02:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
[    0.308436] pci 0000:02:00.0: supports D1
[    0.308437] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.320054] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.320061] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.320303] pci 0000:03:00.0: [1180:e822] type 00 class 0x080500
[    0.320345] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[    0.320394] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf08000ff]
[    0.320703] pci 0000:03:00.0: supports D1 D2
[    0.320704] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.332148] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.332152] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.332155] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.332164] pci 0000:00:1c.1:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.332273] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.332318] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.332361] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.332403] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.332444] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.332486] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.332527] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.332568] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.333254] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.333341] ACPI: EC: interrupt unblocked
[    0.333347] ACPI: EC: event unblocked
[    0.333354] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.333355] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.333406] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.333406] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.333406] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.333406] vgaarb: loaded
[    0.333406] EDAC MC: Ver: 3.0.0
[    0.333406] PCI: Using ACPI for IRQ routing
[    0.333481] PCI: pci_cache_line_size set to 64 bytes
[    0.333610] e820: reserve RAM buffer [mem 0x7fefb000-0x7fffffff]
[    0.333611] e820: reserve RAM buffer [mem 0x46f600000-0x46fffffff]
[    0.333708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.333708] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.337017] clocksource: Switched to clocksource hpet
[    0.344131] VFS: Disk quotas dquot_6.6.0
[    0.344151] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.344221] pnp: PnP ACPI init
[    0.344305] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.344307] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.344308] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.344309] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.344311] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.344313] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.344314] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.344315] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.344317] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.344318] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.344321] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344735] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.344737] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.344772] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.344773] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.344775] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.344794] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.344822] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.344843] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.344866] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.344883] pnp: PnP ACPI: found 7 devices
[    0.351157] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.351190] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.351195] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.351202] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.351214] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.351216] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.351223] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.351227] pci 0000:00:1c.1:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.351236] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.351238] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.351239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.351240] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.351241] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.351242] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.351243] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.351245] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.351246] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.351247] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.351248] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.351249] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.351250] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.351251] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.351252] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.351253] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.351254] pci_bus 0000:00: resource 20 [mem 0x8ea00001-0xf7ffffff window]
[    0.351255] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.351257] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
[    0.351258] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.351259] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf08fffff]
[    0.351260] pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.351325] NET: Registered protocol family 2
[    0.351480] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.351669] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.351782] TCP: Hash tables configured (established 131072 bind 65536)
[    0.351815] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.351853] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.351920] NET: Registered protocol family 1
[    0.351934] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.352548] PCI: CLS 64 bytes, default 64
[    0.352587] Unpacking initramfs...
[    0.692885] Freeing initrd memory: 21096K
[    0.692985] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.692987] software IO TLB [mem 0x7befb000-0x7fefb000] (64MB) mapped at [ffff9f16fbefb000-ffff9f16ffefafff]
[    0.693310] audit: initializing netlink subsys (disabled)
[    0.693367] audit: type=2000 audit(1510142970.693:1): state=initialized audit_enabled=0 res=1
[    0.693649] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.693691] zbud: loaded
[    1.013175] Key type asymmetric registered
[    1.013176] Asymmetric key parser 'x509' registered
[    1.013192] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.013218] io scheduler noop registered
[    1.013219] io scheduler deadline registered
[    1.013228] io scheduler cfq registered (default)
[    1.013229] io scheduler mq-deadline registered
[    1.013913] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[    1.013933] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[    1.013955] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[    1.013975] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.014014] efifb: probing for efifb
[    1.014027] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[    1.014028] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.014028] efifb: scrolling: redraw
[    1.014030] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.017023] Console: switching to colour frame buffer device 200x56
[    1.019904] fb0: EFI VGA frame buffer device
[    1.019910] intel_idle: MWAIT substates: 0x21120
[    1.019911] intel_idle: v0.4.1 model 0x3A
[    1.020047] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.020347] GHES: HEST is not enabled!
[    1.020397] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.020737] Linux agpgart interface v0.103
[    1.036085] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    1.116339] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.116339] AMD IOMMUv2 functionality not available on this system
[    1.116750] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.118492] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.118497] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.118728] mousedev: PS/2 mouse device common for all mice
[    1.118776] rtc_cmos 00:03: RTC can wake from S4
[    1.118926] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.118965] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.118972] intel_pstate: Intel P-state driver initializing
[    1.119269] ledtrig-cpu: registered to indicate activity on CPUs
[    1.119596] NET: Registered protocol family 10
[    1.119994] Segment Routing with IPv6
[    1.120092] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.120288] mip6: Mobile IPv6
[    1.120291] NET: Registered protocol family 17
[    1.120295] mpls_gso: MPLS GSO support
[    1.120698] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[    1.120851] microcode: Microcode Update Driver: v2.2.
[    1.120868] sched_clock: Marking stable (1120840865, 0)->(1119375269, 1465596)
[    1.121264] registered taskstats version 1
[    1.121290] zswap: loaded using pool lzo/zbud
[    1.280588] rtc_cmos 00:03: setting system clock to 2017-11-08 12:09:32 UTC (1510142972)
[    1.280639] PM: Hibernation image not present or could not be loaded.
[    1.283994] Freeing unused kernel memory: 1472K
[    1.283995] Write protecting the kernel read-only data: 12288k
[    1.284752] Freeing unused kernel memory: 1592K
[    1.289244] Freeing unused kernel memory: 1132K
[    1.292263] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.387354] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.387552] thermal LNXTHERM:00: registered as thermal_zone0
[    1.387553] ACPI: Thermal Zone [THM0] (46 C)
[    1.388177] ACPI: bus type USB registered
[    1.388199] usbcore: registered new interface driver usbfs
[    1.388208] usbcore: registered new interface driver hub
[    1.388224] usbcore: registered new device driver usb
[    1.388516] pps_core: LinuxPPS API ver. 1 registered
[    1.388517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.388740] PTP clock support registered
[    1.388856] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.389302] ehci-pci: EHCI PCI platform driver
[    1.389490] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.389502] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.389515] ehci-pci 0000:00:1a.0: debug port 2
[    1.389575] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.389576] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.391907] sdhci: Secure Digital Host Controller Interface driver
[    1.391907] sdhci: Copyright(c) Pierre Ossman
[    1.392162] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.393431] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.393456] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000
[    1.393703] thermal LNXTHERM:01: registered as thermal_zone1
[    1.393704] ACPI: Thermal Zone [THM1] (27 C)
[    1.393921] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.394074] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    1.395926] SCSI subsystem initialized
[    1.397218] libata version 3.00 loaded.
[    1.399683] AVX version of gcm_enc/dec engaged.
[    1.399684] AES CTR mode by8 optimization enabled
[    1.408030] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.408094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.408095] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.408096] usb usb1: Product: EHCI Host Controller
[    1.408097] usb usb1: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[    1.408098] usb usb1: SerialNumber: 0000:00:1a.0
[    1.408225] hub 1-0:1.0: USB hub found
[    1.408241] hub 1-0:1.0: 3 ports detected
[    1.408503] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.408508] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.408522] ehci-pci 0000:00:1d.0: debug port 2
[    1.412412] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.412451] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000
[    1.428030] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.428145] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.428147] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.428147] usb usb2: Product: EHCI Host Controller
[    1.428148] usb usb2: Manufacturer: Linux 4.13.0-1-amd64 ehci_hcd
[    1.428149] usb usb2: SerialNumber: 0000:00:1d.0
[    1.428288] hub 2-0:1.0: USB hub found
[    1.428301] hub 2-0:1.0: 3 ports detected
[    1.428676] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.428684] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.429778] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[    1.429784] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.429946] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.429947] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.429949] usb usb3: Product: xHCI Host Controller
[    1.429950] usb usb3: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[    1.429951] usb usb3: SerialNumber: 0000:00:14.0
[    1.430105] hub 3-0:1.0: USB hub found
[    1.430129] hub 3-0:1.0: 4 ports detected
[    1.430298] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.430303] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.430378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.430380] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.430381] usb usb4: Product: xHCI Host Controller
[    1.430382] usb usb4: Manufacturer: Linux 4.13.0-1-amd64 xhci-hcd
[    1.430383] usb usb4: SerialNumber: 0000:00:14.0
[    1.430493] hub 4-0:1.0: USB hub found
[    1.430508] hub 4-0:1.0: 4 ports detected
[    1.430730] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.573707] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.696103] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5
[    1.696104] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.696155] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.696163] tsc: Refined TSC clocksource calibration: 2594.108 MHz
[    1.696169] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647e07037, max_idle_ns: 440795273876 ns
[    1.696350] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.697053] ahci 0000:00:1f.2: version 3.0
[    1.697254] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.707380] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[    1.707382] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.708090] scsi host0: ahci
[    1.708316] scsi host1: ahci
[    1.708640] scsi host2: ahci
[    1.708906] scsi host3: ahci
[    1.709095] scsi host4: ahci
[    1.709308] scsi host5: ahci
[    1.709375] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 31
[    1.709378] ata2: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d180 irq 31
[    1.709380] ata3: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d200 irq 31
[    1.709381] ata4: DUMMY
[    1.709384] ata5: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d300 irq 31
[    1.709384] ata6: DUMMY
[    1.740097] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.756092] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.756095] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[    1.888419] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.888423] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.888851] hub 1-1:1.0: USB hub found
[    1.889008] hub 1-1:1.0: 6 ports detected
[    1.899577] usb 3-4: config 1 has an invalid interface number: 12 but max is 4
[    1.899580] usb 3-4: config 1 has an invalid interface number: 13 but max is 4
[    1.899582] usb 3-4: config 1 has an invalid interface number: 13 but max is 4
[    1.899585] usb 3-4: config 1 has no interface number 1
[    1.899586] usb 3-4: config 1 has no interface number 4
[    1.900564] usb 3-4: New USB device found, idVendor=1199, idProduct=9079
[    1.900567] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.900569] usb 3-4: Product: Sierra Wireless EM7455 Qualcomm Snapdragon X7 LTE-A
[    1.900571] usb 3-4: Manufacturer: Sierra Wireless, Incorporated
[    1.900573] usb 3-4: SerialNumber: LF53930672041012
[    1.904426] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.904430] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.904871] hub 2-1:1.0: USB hub found
[    1.905018] hub 2-1:1.0: 8 ports detected
[    2.022700] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.022960] ata1.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[    2.022963] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.023378] ata1.00: configured for UDMA/133
[    2.023685] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LSS-32L 704  PQ: 0 ANSI: 5
[    2.098843] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[    2.160012] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[    2.160039] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.176065] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    2.192061] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    2.199274] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.285295] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[    2.285298] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.285300] usb 1-1.3: Product: Biometric Coprocessor
[    2.285302] usb 1-1.3: Manufacturer: Auth
[    2.300428] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=100a
[    2.300432] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.300716] hub 2-1.5:1.0: USB hub found
[    2.300761] hub 2-1.5:1.0: 6 ports detected
[    2.364066] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[    2.374695] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.375458] ata2.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[    2.375461] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.376323] ata2.00: configured for UDMA/133
[    2.376606] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[    2.476643] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.476646] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.476648] usb 1-1.4: Product: Broadcom Bluetooth Device
[    2.476650] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.476652] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[    2.556066] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[    2.671796] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d5
[    2.671800] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.671802] usb 1-1.6: Product: Integrated Camera
[    2.671804] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[    2.720219] clocksource: Switched to clocksource tsc
[    2.730706] ata3: SATA link down (SStatus 0 SControl 300)
[    2.837646] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    3.036353] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    3.042582] ata5: SATA link down (SStatus 0 SControl 300)
[    3.048089] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    3.048114] sd 0:0:0:0: [sda] Write Protect is off
[    3.048119] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.048154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.048222] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.048225] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.048249] sd 1:0:0:0: [sdb] Write Protect is off
[    3.048254] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.048294] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.050087]  sda: sda1 sda2 sda3 sda5 sda6 sda7
[    3.050822] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.100047]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[    3.101036] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.324030] raid6: sse2x1   gen()  8434 MB/s
[    4.392027] raid6: sse2x1   xor()  6958 MB/s
[    4.460027] raid6: sse2x2   gen() 11116 MB/s
[    4.528025] raid6: sse2x2   xor()  8007 MB/s
[    4.596029] raid6: sse2x4   gen() 13109 MB/s
[    4.664027] raid6: sse2x4   xor()  9740 MB/s
[    4.664028] raid6: using algorithm sse2x4 gen() 13109 MB/s
[    4.664028] raid6: .... xor() 9740 MB/s, rmw enabled
[    4.664029] raid6: using ssse3x2 recovery algorithm
[    4.664200] xor: automatically using best checksumming function   avx       
[    4.664319] async_tx: api initialized (async)
[    4.680419] Btrfs loaded, crc32c=crc32c-intel
[    5.317770] PM: Starting manual resume from disk
[    5.317776] PM: Hibernation image partition 8:18 present
[    5.317777] PM: Looking for hibernation image.
[    5.317952] PM: Image not found (code -22)
[    5.317953] PM: Hibernation image not present or could not be loaded.
[    5.421610] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.536981] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.542884] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.543021] systemd[1]: Detected architecture x86-64.
[    5.543199] systemd[1]: Set hostname to <universi-mcbk52>.
[    5.617272] random: crng init done
[    5.674201] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.674343] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.674359] systemd[1]: Reached target System Time Synchronized.
[    5.674368] systemd[1]: Reached target User and Group Name Lookups.
[    5.674517] systemd[1]: Created slice User and Session Slice.
[    5.674554] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.674565] systemd[1]: Reached target Local Encrypted Volumes.
[    5.695877] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    5.702474] lp: driver loaded but no devices found
[    5.702554] RPC: Registered named UNIX socket transport module.
[    5.702555] RPC: Registered udp transport module.
[    5.702556] RPC: Registered tcp transport module.
[    5.702557] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.705699] ppdev: user-space parallel port driver
[    5.821330] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[    5.821350] ACPI: Sleep Button [SLPB]
[    5.821482] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[    5.821561] ACPI: Lid Switch [LID]
[    5.821598] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.821609] ACPI: Power Button [PWRF]
[    5.831473] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.840971] ACPI: Battery Slot [BAT0] (battery present)
[    5.841072] ACPI: Battery Slot [BAT1] (battery absent)
[    5.841213] ACPI: AC Adapter [AC] (on-line)
[    5.869081] Non-volatile memory driver v1.3
[    5.872799] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.872866] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    5.874961] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170531/utaddress-247)
[    5.874967] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.874970] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
[    5.874973] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.874974] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
[    5.874977] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.874977] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170531/utaddress-247)
[    5.874980] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.874981] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.877737] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.877738] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.877739] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-2035-g5bcb23ebbb, EC G7HT39WW-3.22
[    5.877740] thinkpad_acpi: Lenovo ThinkPad T430s, model 23539LU
[    5.877880] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    5.878071] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    5.878148] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.878148] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.883958] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.887118] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.887277] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    5.888662] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    5.912746] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.912747] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.912748] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.912749] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.918036] [drm] Memory usable by graphics device = 2048M
[    5.918038] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[    5.918039] fb: switching to inteldrmfb from EFI VGA
[    5.918090] Console: switching to colour dummy device 80x25
[    5.918446] ath: phy0: Killer Wireless card detected
[    5.920249] [drm] Replacing VGA console driver
[    5.929992] ath: phy0: ASPM enabled: 0x43
[    5.929994] ath: EEPROM regdomain: 0x60
[    5.929994] ath: EEPROM indicates we should expect a direct regpair map
[    5.929996] ath: Country alpha2 being used: 00
[    5.929996] ath: Regpair used: 0x60
[    5.949185] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.949537] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffb8f782680000, irq=17
[    5.967203] intel_rapl: Found RAPL domain package
[    5.967205] intel_rapl: Found RAPL domain core
[    5.967206] intel_rapl: Found RAPL domain uncore
[    5.980089] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.980090] [drm] Driver supports precise vblank timestamp query.
[    5.980368] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.003198] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    6.010741] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
[    6.014692] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    6.052468] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    6.052628] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.053826] acpi device:03: registered as cooling_device6
[    6.053893] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[    6.066944] iTCO_vendor_support: vendor-support=0
[    6.067338] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.067383] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    6.067479] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.264420] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.468207] fbcon: inteldrmfb (fb0) is primary device
[    6.477236] Adding 8389628k swap on /dev/sdb2.  Priority:-1 extents:1 across:8389628k FS
[    6.940641] usbcore: registered new interface driver cdc_ncm
[    6.941317] usbcore: registered new interface driver cdc_wdm
[    6.951076] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.951077] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.951078] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    6.951079] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.951079] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.951080] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    6.951081] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    6.951082] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.960724] cdc_mbim 3-4:1.12: cdc-wdm0: USB WDM device
[    6.960884] cdc_mbim 3-4:1.12 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, a2:d6:9c:f5:2a:e6
[    6.960910] usbcore: registered new interface driver cdc_mbim
[    6.963379] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    6.964154] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    6.964215] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    6.964277] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    6.965772] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    6.965839] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    6.965894] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    6.965950] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    7.259788] Console: switching to colour frame buffer device 200x56
[    7.282759] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.282957] usbcore: registered new interface driver usbserial
[    7.282989] usbcore: registered new interface driver usbserial_generic
[    7.283016] usbserial: USB Serial support registered for generic
[    7.286206] usbcore: registered new interface driver qcserial
[    7.286234] usbserial: USB Serial support registered for Qualcomm USB modem
[    7.287604] qcserial 3-4:1.0: Qualcomm USB modem converter detected
[    7.287914] usb 3-4: Qualcomm USB modem converter now attached to ttyUSB0
[    7.288331] qcserial 3-4:1.2: Qualcomm USB modem converter detected
[    7.288618] usb 3-4: Qualcomm USB modem converter now attached to ttyUSB1
[    7.288923] qcserial 3-4:1.3: Qualcomm USB modem converter detected
[    7.289082] usb 3-4: Qualcomm USB modem converter now attached to ttyUSB2
[    7.292693] cdc_mbim 3-4:1.12 wwp0s20u4i12: renamed from wwan0
[    7.487442] media: Linux media interface: v0.10
[    7.491371] Linux video capture interface: v2.00
[    7.509705] Bluetooth: Core ver 2.22
[    7.509716] NET: Registered protocol family 31
[    7.509717] Bluetooth: HCI device and connection manager initialized
[    7.509720] Bluetooth: HCI socket layer initialized
[    7.509722] Bluetooth: L2CAP socket layer initialized
[    7.509726] Bluetooth: SCO socket layer initialized
[    7.569082] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[    7.571433] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    7.571439] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    7.571444] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    7.571448] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    7.571744] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input18
[    7.571967] usbcore: registered new interface driver uvcvideo
[    7.571969] USB Video Class driver (1.1.1)
[    7.580964] usbcore: registered new interface driver btusb
[    8.402483] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.477234] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    8.483307] systemd-journald[308]: Received request to flush runtime journal from PID 1
[    8.567757] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.684073] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.915772] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.064294] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.737762] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: user_xattr
[   10.543243] nfc: nfc_init: NFC Core ver 0.1
[   10.553442] NET: Registered protocol family 39
[   10.561972] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.561973] Bluetooth: BNEP filters: protocol multicast
[   10.561975] Bluetooth: BNEP socket layer initialized
[   10.641055] ata1.00: configured for UDMA/133
[   10.641060] ata1: EH complete
[   10.703106] ata2.00: configured for UDMA/133
[   10.703112] ata2: EH complete
[   13.589003] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.848353] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.854277] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.865305] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.881400] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.198933] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.186628] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   17.202242] Ebtables v2.0 registered
[   17.998718] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.057424] wlan0: authenticate with f8:1a:67:5a:c4:75
[   18.068260] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[   18.070117] wlan0: authenticated
[   18.072003] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[   18.073867] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=3)
[   18.074008] wlan0: associated
[   18.074055] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.078003] ath: EEPROM regdomain: 0x809c
[   18.078005] ath: EEPROM indicates we should expect a country code
[   18.078005] ath: doing EEPROM country->regdmn map search
[   18.078006] ath: country maps to regdmn code: 0x52
[   18.078007] ath: Country alpha2 being used: CN
[   18.078007] ath: Regpair used: 0x52
[   18.078008] ath: regdomain 0x809c dynamically updated by country IE
[   22.283444] Bluetooth: RFCOMM TTY layer initialized
[   22.283449] Bluetooth: RFCOMM socket layer initialized
[   22.283454] Bluetooth: RFCOMM ver 1.11
[ 1893.419171] fuse init (API version 7.26)