[    0.000000] Linux version 4.12.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170805 (Debian 6.4.0-3) ) #1 SMP Debian 4.12.6-1 (2017-08-12)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007fefcfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fefd000-0x000000007fffffff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008e9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 23539LU/23539LU, BIOS CBET4000 4.6-1272-gd533b16669 08/30/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 080000000 mask FC0000000 uncachable
[    0.000000]   1 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   2 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   3 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x7fefd max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff8d4840099000] 99000 size 24576
[    0.000000] BRK [0x5bf54000, 0x5bf54fff] PGTABLE
[    0.000000] BRK [0x5bf55000, 0x5bf55fff] PGTABLE
[    0.000000] BRK [0x5bf56000, 0x5bf56fff] PGTABLE
[    0.000000] BRK [0x5bf57000, 0x5bf57fff] PGTABLE
[    0.000000] BRK [0x5bf58000, 0x5bf58fff] PGTABLE
[    0.000000] BRK [0x5bf59000, 0x5bf59fff] PGTABLE
[    0.000000] BRK [0x5bf5a000, 0x5bf5afff] PGTABLE
[    0.000000] BRK [0x5bf5b000, 0x5bf5bfff] PGTABLE
[    0.000000] BRK [0x5bf5c000, 0x5bf5cfff] PGTABLE
[    0.000000] BRK [0x5bf5d000, 0x5bf5dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35723000-0x36b88fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F2030 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x000000007FF0F0E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x000000007FF127E0 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x000000007FF0F280 00355B (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x000000007FF0F240 000040
[    0.000000] ACPI: FACS 0x000000007FF0F240 000040
[    0.000000] ACPI: SSDT 0x000000007FF128E0 0018AD (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x000000007FF14190 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x000000007FF141D0 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x000000007FF14210 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x000000007FF14280 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x000000007FF16330 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26f5f9000-0x26f5fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007fefcfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f5fffff]
[    0.000000] On node 0 totalpages: 2028700
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8124 pages used for memmap
[    0.000000]   DMA32 zone: 519933 pages, LIFO batch:31
[    0.000000]   Normal zone: 23512 pages used for memmap
[    0.000000]   Normal zone: 1504768 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x0000000080a00000-0x000000008e9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7fefd000-0x7fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8e9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ea00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0x8ea00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 38 pages/cpu @ffff8d4aaf200000 s114776 r8192 d32680 u524288
[    0.000000] pcpu-alloc: s114776 r8192 d32680 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1996978
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.12.0-1-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7884460K/8114800K available (6481K kernel code, 1145K rwdata, 2908K rodata, 1468K init, 704K bss, 230340K reserved, 0K cma-reserved)
[    0.000000] ftrace: allocating 28155 entries in 110 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2593.987 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.97 BogoMIPS (lpj=10375948)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.009251] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009291] Security Framework initialized
[    0.009292] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.009297] AppArmor: AppArmor disabled by boot time parameter
[    0.009640] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.011529] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.012409] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012415] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.012652] CPU: Physical Processor ID: 0
[    0.012653] CPU: Processor Core ID: 0
[    0.012660] mce: CPU supports 7 MCE banks
[    0.012667] CPU0: Thermal monitoring enabled (TM1)
[    0.012676] process: using mwait in idle threads
[    0.012678] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.012679] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.012787] Freeing SMP alternatives memory: 24K
[    0.013973] smpboot: Max logical packages: 2
[    0.013978] DMAR: Host address width 36
[    0.013979] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.013987] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.013988] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.013990] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.013992] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.013993] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.013994] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.014346] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.014347] x2apic enabled
[    0.014352] Switched APIC routing to cluster x2apic.
[    0.014803] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.054503] TSC deadline timer enabled
[    0.054506] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.054580] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.054600] ... version:                3
[    0.054601] ... bit width:              48
[    0.054601] ... generic registers:      4
[    0.054602] ... value mask:             0000ffffffffffff
[    0.054602] ... max period:             00007fffffffffff
[    0.054602] ... fixed-purpose events:   3
[    0.054603] ... event mask:             000000070000000f
[    0.055075] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.055090] smp: Bringing up secondary CPUs ...
[    0.055173] x86: Booting SMP configuration:
[    0.055174] .... node  #0, CPUs:      #1 #2 #3
[    0.294020] smp: Brought up 1 node, 4 CPUs
[    0.294020] smpboot: Total of 4 processors activated (20755.64 BogoMIPS)
[    0.296112] sched_clock: Marking stable (296000000, 0)->(292347266, 3652734)
[    0.296382] devtmpfs: initialized
[    0.296432] x86/mm: Memory block size: 128MB
[    0.299006] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.299013] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.299059] pinctrl core: initialized pinctrl subsystem
[    0.299153] NET: Registered protocol family 16
[    0.299315] cpuidle: using governor ladder
[    0.299345] cpuidle: using governor menu
[    0.299347] PCCT header not found.
[    0.299370] ACPI: bus type PCI registered
[    0.299371] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.299421] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.299423] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.299430] PCI: Using configuration type 1 for base access
[    0.299464] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.300261] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.300439] ACPI: Added _OSI(Module Device)
[    0.300440] ACPI: Added _OSI(Processor Device)
[    0.300440] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.300441] ACPI: Added _OSI(Processor Aggregator Device)
[    0.300556] ACPI: Executed 1 blocks of module-level executable AML code
[    0.302500] ACPI : EC: EC started
[    0.302501] ACPI : EC: interrupt blocked
[    0.302543] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.302545] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.302546] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.302546] ACPI: Interpreter enabled
[    0.302562] ACPI: (supports S0 S3 S4 S5)
[    0.302563] ACPI: Using IOAPIC for interrupt routing
[    0.302580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.306655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.306659] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.306704] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.306712] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.306757] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000c7fff window] (conflicts with Video ROM [mem 0x000c0000-0x000c67ff])
[    0.306889] PCI host bridge to bus 0000:00
[    0.306891] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.306892] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.306893] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.306894] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.306895] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.306897] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.306898] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.306899] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.306900] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.306901] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.306902] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.306903] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.306904] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.306906] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.306907] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.306908] pci_bus 0000:00: root bus resource [mem 0x8ea00001-0xf7ffffff window]
[    0.306909] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.306910] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306916] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.306993] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[    0.307021] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.307077] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.307086] pci 0000:00:02.0: reg 0x10: [mem 0xf1400000-0xf17fffff 64bit]
[    0.307091] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.307095] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.307161] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.307169] pci 0000:00:04.0: reg 0x10: [mem 0xf1930000-0xf1937fff 64bit]
[    0.307254] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.307274] pci 0000:00:14.0: reg 0x10: [mem 0xf1920000-0xf192ffff 64bit]
[    0.307341] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.307374] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.307408] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.307423] pci 0000:00:19.0: reg 0x10: [mem 0xf1900000-0xf191ffff]
[    0.307432] pci 0000:00:19.0: reg 0x14: [mem 0xf193c000-0xf193cfff]
[    0.307440] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.307498] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.307556] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.307573] pci 0000:00:1a.0: reg 0x10: [mem 0xf193e000-0xf193e3ff]
[    0.307655] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.307688] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.307720] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.307737] pci 0000:00:1b.0: reg 0x10: [mem 0xf1938000-0xf193bfff 64bit]
[    0.307808] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.307846] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.307882] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[    0.308009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.308096] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[    0.308224] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.308304] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.308321] pci 0000:00:1d.0: reg 0x10: [mem 0xf193f000-0xf193f3ff]
[    0.308403] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.308437] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.308467] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.308621] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.308637] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.308645] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.308653] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.308661] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.308669] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.308677] pci 0000:00:1f.2: reg 0x24: [mem 0xf193d000-0xf193d7ff]
[    0.308721] pci 0000:00:1f.2: PME# supported from D3hot
[    0.308776] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.308791] pci 0000:00:1f.3: reg 0x10: [mem 0xf1940000-0xf19400ff 64bit]
[    0.308811] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.308900] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.308988] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.309040] pci 0000:02:00.0: reg 0x10: [mem 0xf1800000-0xf181ffff 64bit]
[    0.309128] pci 0000:02:00.0: reg 0x30: [mem 0xf1820000-0xf182ffff pref]
[    0.309250] pci 0000:02:00.0: supports D1
[    0.309250] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.321358] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.321365] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.321497] pci 0000:03:00.0: [1180:e823] type 00 class 0x080500
[    0.321535] pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
[    0.321572] pci 0000:03:00.0: reg 0x10: [mem 0xf0800000-0xf08000ff]
[    0.321881] pci 0000:03:00.0: supports D1 D2
[    0.321882] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.333586] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.333590] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.333593] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.333602] pci 0000:00:1c.1:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.333710] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.333754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.333796] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.333839] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.333879] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.333921] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.333961] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.334002] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.334547] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.334632] ACPI : EC: interrupt unblocked
[    0.334638] ACPI : EC: event unblocked
[    0.334644] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.334645] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.334716] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.334717] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.334720] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.334720] vgaarb: loaded
[    0.334757] EDAC MC: Ver: 3.0.0
[    0.335060] PCI: Using ACPI for IRQ routing
[    0.336532] PCI: pci_cache_line_size set to 64 bytes
[    0.336667] e820: reserve RAM buffer [mem 0x7fefd000-0x7fffffff]
[    0.336669] e820: reserve RAM buffer [mem 0x26f600000-0x26fffffff]
[    0.336802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.336806] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.339832] clocksource: Switched to clocksource hpet
[    0.347744] VFS: Disk quotas dquot_6.6.0
[    0.347765] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.347850] pnp: PnP ACPI init
[    0.347941] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.347942] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.347943] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.347945] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.347946] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.347947] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.347948] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.347950] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.347951] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.347952] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.347955] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348393] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.348395] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.348428] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.348429] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.348431] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.348449] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.348477] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.348500] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.348525] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.348541] pnp: PnP ACPI: found 7 devices
[    0.354689] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.354723] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.354728] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.354735] pci 0000:00:1c.0:   bridge window [mem 0xf1800000-0xf18fffff]
[    0.354746] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.354749] pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
[    0.354755] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf08fffff]
[    0.354759] pci 0000:00:1c.1:   bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.354769] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.354770] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.354771] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.354772] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.354773] pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000cbfff window]
[    0.354774] pci_bus 0000:00: resource 9 [mem 0x000cc000-0x000cffff window]
[    0.354775] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff window]
[    0.354776] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff window]
[    0.354777] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff window]
[    0.354778] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff window]
[    0.354779] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff window]
[    0.354780] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff window]
[    0.354781] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff window]
[    0.354782] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff window]
[    0.354783] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff window]
[    0.354784] pci_bus 0000:00: resource 19 [mem 0x8ea00001-0xf7ffffff window]
[    0.354785] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff window]
[    0.354786] pci_bus 0000:02: resource 1 [mem 0xf1800000-0xf18fffff]
[    0.354788] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.354788] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf08fffff]
[    0.354789] pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[    0.354855] NET: Registered protocol family 2
[    0.354996] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.355118] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.355293] TCP: Hash tables configured (established 65536 bind 65536)
[    0.355324] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.355351] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.355405] NET: Registered protocol family 1
[    0.355419] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.356043] PCI: CLS 64 bytes, default 64
[    0.356081] Unpacking initramfs...
[    0.689010] Freeing initrd memory: 20888K
[    0.689122] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.689125] software IO TLB [mem 0x7befd000-0x7fefd000] (64MB) mapped at [ffff8d48bbefd000-ffff8d48bfefcfff]
[    0.689447] audit: initializing netlink subsys (disabled)
[    0.689503] audit: type=2000 audit(1504099977.685:1): state=initialized audit_enabled=0 res=1
[    0.689784] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.689822] zbud: loaded
[    1.009923] Key type asymmetric registered
[    1.009924] Asymmetric key parser 'x509' registered
[    1.009935] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.009961] io scheduler noop registered
[    1.009962] io scheduler deadline registered
[    1.009970] io scheduler cfq registered (default)
[    1.009971] io scheduler mq-deadline registered
[    1.010635] pcieport 0000:00:01.0: Signaling PME with IRQ 26
[    1.010654] pcieport 0000:00:1c.0: Signaling PME with IRQ 27
[    1.010673] pcieport 0000:00:1c.1: Signaling PME with IRQ 28
[    1.010694] pciehp 0000:00:1c.1:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.010732] efifb: probing for efifb
[    1.010744] efifb: framebuffer at 0xe0000000, using 5632k, total 5632k
[    1.010744] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.010745] efifb: scrolling: redraw
[    1.010746] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.013683] Console: switching to colour frame buffer device 200x56
[    1.016509] fb0: EFI VGA frame buffer device
[    1.016516] intel_idle: MWAIT substates: 0x21120
[    1.016517] intel_idle: v0.4.1 model 0x3A
[    1.016648] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.016941] GHES: HEST is not enabled!
[    1.016986] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.017303] Linux agpgart interface v0.103
[    1.031945] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    1.112348] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.112349] AMD IOMMUv2 functionality not available on this system
[    1.112842] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.114530] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.114535] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.114717] mousedev: PS/2 mouse device common for all mice
[    1.114752] rtc_cmos 00:03: RTC can wake from S4
[    1.114961] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.114993] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.115002] intel_pstate: Intel P-state driver initializing
[    1.115291] ledtrig-cpu: registered to indicate activity on CPUs
[    1.115587] NET: Registered protocol family 10
[    1.115990] Segment Routing with IPv6
[    1.116014] mip6: Mobile IPv6
[    1.116017] NET: Registered protocol family 17
[    1.116020] mpls_gso: MPLS GSO support
[    1.116439] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[    1.116537] microcode: Microcode Update Driver: v2.2.
[    1.116636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.116759] registered taskstats version 1
[    1.116788] zswap: loaded using pool lzo/zbud
[    1.276514] rtc_cmos 00:03: setting system clock to 2017-08-30 13:32:58 UTC (1504099978)
[    1.276560] PM: Hibernation image not present or could not be loaded.
[    1.279289] Freeing unused kernel memory: 1468K
[    1.279291] Write protecting the kernel read-only data: 12288k
[    1.280100] Freeing unused kernel memory: 1696K
[    1.285207] Freeing unused kernel memory: 1188K
[    1.288063] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.372308] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.372444] pps_core: LinuxPPS API ver. 1 registered
[    1.372445] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.372519] thermal LNXTHERM:00: registered as thermal_zone0
[    1.372520] ACPI: Thermal Zone [THM0] (51 C)
[    1.372648] PTP clock support registered
[    1.373201] thermal LNXTHERM:01: registered as thermal_zone1
[    1.373202] ACPI: Thermal Zone [THM1] (27 C)
[    1.373456] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.373457] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.373531] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.373616] ACPI: bus type USB registered
[    1.373631] usbcore: registered new interface driver usbfs
[    1.373637] usbcore: registered new interface driver hub
[    1.373650] usbcore: registered new device driver usb
[    1.375326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.375490] ehci-pci: EHCI PCI platform driver
[    1.376795] sdhci: Secure Digital Host Controller Interface driver
[    1.376796] sdhci: Copyright(c) Pierre Ossman
[    1.377010] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4)
[    1.377452] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[    1.377569] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[    1.380063] SCSI subsystem initialized
[    1.381333] libata version 3.00 loaded.
[    1.387405] AVX version of gcm_enc/dec engaged.
[    1.387406] AES CTR mode by8 optimization enabled
[    1.517795] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.642596] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:84:1e:a5
[    1.642597] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.642649] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.642876] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.642883] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.643976] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[    1.643982] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.644560] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.644563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.644565] usb usb1: Product: xHCI Host Controller
[    1.644566] usb usb1: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[    1.644568] usb usb1: SerialNumber: 0000:00:14.0
[    1.644935] hub 1-0:1.0: USB hub found
[    1.644967] hub 1-0:1.0: 4 ports detected
[    1.645372] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.645377] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.645782] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.645785] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.645787] usb usb2: Product: xHCI Host Controller
[    1.645789] usb usb2: Manufacturer: Linux 4.12.0-1-amd64 xhci-hcd
[    1.645790] usb usb2: SerialNumber: 0000:00:14.0
[    1.646108] hub 2-0:1.0: USB hub found
[    1.646122] hub 2-0:1.0: 4 ports detected
[    1.646435] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.646440] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.646453] ehci-pci 0000:00:1a.0: debug port 2
[    1.650370] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.650391] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf193e000
[    1.663957] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.664013] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.664016] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.664017] usb usb3: Product: EHCI Host Controller
[    1.664019] usb usb3: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[    1.664020] usb usb3: SerialNumber: 0000:00:1a.0
[    1.664314] hub 3-0:1.0: USB hub found
[    1.664322] hub 3-0:1.0: 3 ports detected
[    1.664621] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.664627] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.664641] ehci-pci 0000:00:1d.0: debug port 2
[    1.668557] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.668576] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf193f000
[    1.683971] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.684038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.684040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.684042] usb usb4: Product: EHCI Host Controller
[    1.684044] usb usb4: Manufacturer: Linux 4.12.0-1-amd64 ehci_hcd
[    1.684045] usb usb4: SerialNumber: 0000:00:1d.0
[    1.684361] hub 4-0:1.0: USB hub found
[    1.684371] hub 4-0:1.0: 3 ports detected
[    1.684939] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.685953] ahci 0000:00:1f.2: version 3.0
[    1.686272] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.696407] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
[    1.696412] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.697988] scsi host0: ahci
[    1.698298] scsi host1: ahci
[    1.698505] scsi host2: ahci
[    1.698698] scsi host3: ahci
[    1.698848] scsi host4: ahci
[    1.699053] scsi host5: ahci
[    1.699184] ata1: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d100 irq 31
[    1.699189] ata2: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d180 irq 31
[    1.699195] ata3: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d200 irq 31
[    1.699196] ata4: DUMMY
[    1.699199] ata5: SATA max UDMA/133 abar m2048@0xf193d000 port 0xf193d300 irq 31
[    1.699200] ata6: DUMMY
[    1.699925] tsc: Refined TSC clocksource calibration: 2594.111 MHz
[    1.699936] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564811980e, max_idle_ns: 440795290434 ns
[    1.971955] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[    1.991943] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.011948] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    2.014663] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.016979] ata1.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[    2.016982] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.017405] ata1.00: configured for UDMA/133
[    2.017824] scsi 0:0:0:0: Direct-Access     ATA      LITEONIT LSS-32L 704  PQ: 0 ANSI: 5
[    2.082402] psmouse serio1: synaptics: queried max coordinates: x [..5470], y [..4498]
[    2.132096] usb 1-4: New USB device found, idVendor=1e0e, idProduct=9001
[    2.132100] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.132102] usb 1-4: Product: Android
[    2.132104] usb 1-4: Manufacturer: Android
[    2.132105] usb 1-4: SerialNumber: Mdm9x25
[    2.140341] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    2.140346] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.140722] usb-storage 1-4:1.7: USB Mass Storage device detected
[    2.140789] hub 3-1:1.0: USB hub found
[    2.140837] hub 3-1:1.0: 6 ports detected
[    2.140981] scsi host6: usb-storage 1-4:1.7
[    2.141167] usbcore: registered new interface driver usb-storage
[    2.141878] usbcore: registered new interface driver uas
[    2.143799] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 920262
[    2.143807] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.160403] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    2.160407] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.160951] hub 4-1:1.0: USB hub found
[    2.161132] hub 4-1:1.0: 8 ports detected
[    2.182991] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.220481] random: fast init done
[    2.366683] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.367443] ata2.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[    2.367446] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    2.368205] ata2.00: configured for UDMA/133
[    2.368644] scsi 1:0:0:0: Direct-Access     ATA      WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[    2.427976] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[    2.447980] usb 4-1.5: new high-speed USB device number 3 using ehci-pci
[    2.537306] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
[    2.537310] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.537312] usb 3-1.3: Product: Biometric Coprocessor
[    2.537314] usb 3-1.3: Manufacturer: Auth
[    2.556416] usb 4-1.5: New USB device found, idVendor=17ef, idProduct=100a
[    2.556419] usb 4-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.556840] hub 4-1.5:1.0: USB hub found
[    2.557014] hub 4-1.5:1.0: 6 ports detected
[    2.615982] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[    2.722692] ata3: SATA link down (SStatus 0 SControl 300)
[    2.724088] clocksource: Switched to clocksource tsc
[    2.728520] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.728524] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.728526] usb 3-1.4: Product: Broadcom Bluetooth Device
[    2.728528] usb 3-1.4: Manufacturer: Broadcom Corp
[    2.728530] usb 3-1.4: SerialNumber: 7CE9D3B7FC24
[    2.807983] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[    2.824470] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.923797] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d5
[    2.923801] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.923803] usb 3-1.6: Product: Integrated Camera
[    2.923805] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[    3.023286] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    3.038526] ata5: SATA link down (SStatus 0 SControl 300)
[    3.043045] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    3.043047] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    3.043050] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    3.043071] sd 0:0:0:0: [sda] Write Protect is off
[    3.043072] sd 1:0:0:0: [sdb] Write Protect is off
[    3.043075] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.043077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.043120] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.043141] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.047268]  sda: sda1 sda2 sda3 sda5 sda6 sda7
[    3.048306] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.173353] scsi 6:0:0:0: CD-ROM            Linux    File-Stor Gadget 0000 PQ: 0 ANSI: 2
[    3.180012] sr 6:0:0:0: [sr0] scsi-1 drive
[    3.180015] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.180348] sr 6:0:0:0: Attached scsi CD-ROM sr0
[    3.451287]  sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[    3.452015] sd 1:0:0:0: [sdb] Attached SCSI disk
[    4.404027] raid6: sse2x1   gen()  8575 MB/s
[    4.472029] raid6: sse2x1   xor()  6980 MB/s
[    4.540034] raid6: sse2x2   gen() 11112 MB/s
[    4.608035] raid6: sse2x2   xor()  7979 MB/s
[    4.676037] raid6: sse2x4   gen() 13095 MB/s
[    4.744040] raid6: sse2x4   xor()  9707 MB/s
[    4.744041] raid6: using algorithm sse2x4 gen() 13095 MB/s
[    4.744042] raid6: .... xor() 9707 MB/s, rmw enabled
[    4.744042] raid6: using ssse3x2 recovery algorithm
[    4.744198] xor: automatically using best checksumming function   avx       
[    4.744320] async_tx: api initialized (async)
[    4.760068] Btrfs loaded, crc32c=crc32c-intel
[    5.503307] PM: Starting manual resume from disk
[    5.503313] PM: Hibernation image partition 8:18 present
[    5.503314] PM: Looking for hibernation image.
[    5.503474] PM: Image not found (code -22)
[    5.503476] PM: Hibernation image not present or could not be loaded.
[    5.643173] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.757512] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.762023] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.762121] systemd[1]: Detected architecture x86-64.
[    5.762267] systemd[1]: Set hostname to <universi-mcbk52>.
[    5.840088] random: crng init done
[    5.896613] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.896794] systemd[1]: Created slice User and Session Slice.
[    5.896823] systemd[1]: Listening on LVM2 poll daemon socket.
[    5.896857] systemd[1]: Listening on udev Control Socket.
[    5.896959] systemd[1]: Created slice System Slice.
[    5.897437] systemd[1]: Mounting RPC Pipe File System...
[    5.897996] systemd[1]: Mounting Huge Pages File System...
[    5.918122] EXT4-fs (sda5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    5.919005] RPC: Registered named UNIX socket transport module.
[    5.919006] RPC: Registered udp transport module.
[    5.919006] RPC: Registered tcp transport module.
[    5.919007] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.924509] lp: driver loaded but no devices found
[    5.926310] ppdev: user-space parallel port driver
[    6.043327] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[    6.043332] ACPI: Sleep Button [SLPB]
[    6.043616] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[    6.043701] ACPI: Lid Switch [LID]
[    6.043753] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    6.043755] ACPI: Power Button [PWRF]
[    6.085113] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.088155] ACPI: AC Adapter [AC] (on-line)
[    6.089011] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20170303/utaddress-247)
[    6.089016] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.089018] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    6.089020] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.089021] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    6.089024] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.089024] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20170303/utaddress-247)
[    6.089026] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.089027] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    6.094612] Non-volatile memory driver v1.3
[    6.095879] ACPI: Battery Slot [BAT0] (battery present)
[    6.095964] ACPI: Battery Slot [BAT1] (battery absent)
[    6.112708] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    6.112709] thinkpad_acpi: http://ibm-acpi.sf.net/
[    6.112709] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-1272-gd533b16669, EC G7HT39WW-3.22
[    6.112710] thinkpad_acpi: Lenovo ThinkPad T430s, model 23539LU
[    6.113243] thinkpad_hwmon thinkpad_hwmon: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    6.113426] thinkpad_acpi: Tablet mode switch found (type: MHKG), currently in laptop mode
[    6.113500] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    6.113501] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    6.115466] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    6.115549] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    6.116834] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    6.119050] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    6.119087] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    6.119123] sr 6:0:0:0: Attached scsi generic sg2 type 5
[    6.121143] ath: phy0: Killer Wireless card detected
[    6.122266] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    6.131700] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    6.131702] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    6.131703] RAPL PMU: hw unit of domain package 2^-16 Joules
[    6.131703] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    6.133002] ath: phy0: ASPM enabled: 0x43
[    6.133005] ath: EEPROM regdomain: 0x60
[    6.133006] ath: EEPROM indicates we should expect a direct regpair map
[    6.133008] ath: Country alpha2 being used: 00
[    6.133008] ath: Regpair used: 0x60
[    6.139886] [drm] Memory usable by graphics device = 2048M
[    6.139889] checking generic (e0000000 580000) vs hw (e0000000 10000000)
[    6.139890] fb: switching to inteldrmfb from EFI VGA
[    6.139928] Console: switching to colour dummy device 80x25
[    6.140033] [drm] Replacing VGA console driver
[    6.140499] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.141069] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffff9d34c13e0000, irq=17
[    6.144439] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    6.144441] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    6.144442] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[    6.144443] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    6.144444] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    6.144445] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    6.144446] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[    6.144447] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    6.187805] iTCO_vendor_support: vendor-support=0
[    6.188458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    6.188500] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[    6.189099] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    6.197389] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.197391] [drm] Driver supports precise vblank timestamp query.
[    6.197676] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.214389] intel_rapl: Found RAPL domain package
[    6.214390] intel_rapl: Found RAPL domain core
[    6.214391] intel_rapl: Found RAPL domain uncore
[    6.271806] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[    6.271955] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    6.273086] acpi device:03: registered as cooling_device5
[    6.273139] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    6.278747] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem
[    6.281289] EXT4-fs (sda3): mounted filesystem without journal. Opts: user_xattr
[    6.283621] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    6.484360] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    6.607376] Adding 8389628k swap on /dev/sdb2.  Priority:-1 extents:1 across:8389628k FS
[    6.688297] fbcon: inteldrmfb (fb0) is primary device
[    7.146810] usbcore: registered new interface driver cdc_wdm
[    7.147351] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    7.148041] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    7.148098] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    7.148186] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    7.148366] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    7.148419] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    7.148481] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    7.148538] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    7.148574] qmi_wwan 1-4:1.5: cdc-wdm0: USB WDM device
[    7.149547] qmi_wwan 1-4:1.5 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, 06:56:44:23:c3:02
[    7.149602] usbcore: registered new interface driver qmi_wwan
[    7.545607] Console: switching to colour frame buffer device 200x56
[    7.568910] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    7.569046] usbcore: registered new interface driver usbserial
[    7.569071] usbcore: registered new interface driver usbserial_generic
[    7.569098] usbserial: USB Serial support registered for generic
[    7.572473] usbcore: registered new interface driver option
[    7.572488] usbserial: USB Serial support registered for GSM modem (1-port)
[    7.572595] option 1-4:1.0: GSM modem (1-port) converter detected
[    7.572987] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0
[    7.573050] option 1-4:1.1: GSM modem (1-port) converter detected
[    7.573135] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1
[    7.573193] option 1-4:1.2: GSM modem (1-port) converter detected
[    7.573268] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB2
[    7.573323] option 1-4:1.3: GSM modem (1-port) converter detected
[    7.573397] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB3
[    7.573455] option 1-4:1.4: GSM modem (1-port) converter detected
[    7.573517] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB4
[    7.575756] qmi_wwan 1-4:1.5 wwp0s20u4i5: renamed from wwan0
[    7.650683] media: Linux media interface: v0.10
[    7.656211] Linux video capture interface: v2.00
[    7.667765] Bluetooth: Core ver 2.22
[    7.667777] NET: Registered protocol family 31
[    7.667778] Bluetooth: HCI device and connection manager initialized
[    7.667781] Bluetooth: HCI socket layer initialized
[    7.667783] Bluetooth: L2CAP socket layer initialized
[    7.667793] Bluetooth: SCO socket layer initialized
[    7.732625] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d5)
[    7.734322] uvcvideo 3-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    7.734324] uvcvideo 3-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    7.734325] uvcvideo 3-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    7.734326] uvcvideo 3-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    7.734396] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input18
[    7.734449] usbcore: registered new interface driver uvcvideo
[    7.734449] USB Video Class driver (1.1.1)
[    7.744772] usbcore: registered new interface driver btusb
[    8.327309] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.174911] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.282041] systemd-journald[305]: Received request to flush runtime journal from PID 1
[    9.283652] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    9.421327] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.599646] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: user_xattr
[   10.038620] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: user_xattr
[   10.301678] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: user_xattr
[   10.750052] nfc: nfc_init: NFC Core ver 0.1
[   10.750499] NET: Registered protocol family 39
[   10.768574] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.768575] Bluetooth: BNEP filters: protocol multicast
[   10.768580] Bluetooth: BNEP socket layer initialized
[   11.000179] ata1.00: configured for UDMA/133
[   11.000183] ata1: EH complete
[   11.065246] ata2.00: configured for UDMA/133
[   11.065250] ata2: EH complete
[   13.981294] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.240698] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.248468] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.259157] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.275508] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.578824] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.380477] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   16.390749] Ebtables v2.0 registered
[   18.431090] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   18.486410] wlan0: authenticate with f8:1a:67:5a:c4:75
[   18.497273] wlan0: send auth to f8:1a:67:5a:c4:75 (try 1/3)
[   18.498901] wlan0: authenticated
[   18.500718] wlan0: associate with f8:1a:67:5a:c4:75 (try 1/3)
[   18.502315] wlan0: RX AssocResp from f8:1a:67:5a:c4:75 (capab=0x11 status=0 aid=2)
[   18.502443] wlan0: associated
[   18.502451] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   18.514924] ath: EEPROM regdomain: 0x809c
[   18.514925] ath: EEPROM indicates we should expect a country code
[   18.514926] ath: doing EEPROM country->regdmn map search
[   18.514927] ath: country maps to regdmn code: 0x52
[   18.514928] ath: Country alpha2 being used: CN
[   18.514929] ath: Regpair used: 0x52
[   18.514930] ath: regdomain 0x809c dynamically updated by country IE
[   22.160857] Bluetooth: RFCOMM TTY layer initialized
[   22.160864] Bluetooth: RFCOMM socket layer initialized
[   22.160869] Bluetooth: RFCOMM ver 1.11