*** Pre-CBMEM romstage console overflowed, log truncated! ***
Found compatible clock, CAS pair.
Selected DRAM frequency: 666 MHz
Selected CAS latency   : 9T
PLL busy... done in 70 us
MCU frequency is set at : 666 MHz
Done dimm mapping
Update PCI-E configuration space:
PCI(0, 0, 0)[a0] = 0
PCI(0, 0, 0)[a4] = 2
PCI(0, 0, 0)[bc] = 82a00000
PCI(0, 0, 0)[a8] = 7b600000
PCI(0, 0, 0)[ac] = 2
PCI(0, 0, 0)[b8] = 80000000
PCI(0, 0, 0)[b0] = 80a00000
PCI(0, 0, 0)[b4] = 80800000
PCI(0, 0, 0)[7c] = 7f
PCI(0, 0, 0)[70] = fe000000
PCI(0, 0, 0)[74] = 1
PCI(0, 0, 0)[78] = fe000c00
Done memory map
Done io registers
t123: 1912, 9120, 500
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : YES
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Normal
ME: Current Operation State : M0 without UMA
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : Policy Module
ME: Power Management Event  : Non-power cycle reset
ME: Progress Phase State    : Entery into Policy Module
ME: FWS2: 0x39000006
ME:  Bist in progress: 0x0
ME:  ICC Status      : 0x3
ME:  Invoke MEBx     : 0x0
ME:  CPU replaced    : 0x0
ME:  MBP ready       : 0x0
ME:  MFS failure     : 0x0
ME:  Warm reset req  : 0x0
ME:  CPU repl valid  : 0x0
ME:  (Reserved)      : 0x0
ME:  FW update req   : 0x0
ME:  (Reserved)      : 0x0
ME:  Current state   : 0x0
ME:  Current PM event: 0x9
ME:  Progress code   : 0x3
Waited long enough, or CPU was not replaced, continue...
PASSED! Tell ME that DRAM is ready
ME: FWS2: 0x390b0006
ME:  Bist in progress: 0x0
ME:  ICC Status      : 0x3
ME:  Invoke MEBx     : 0x0
ME:  CPU replaced    : 0x0
ME:  MBP ready       : 0x0
ME:  MFS failure     : 0x0
ME:  Warm reset req  : 0x0
ME:  CPU repl valid  : 0x0
ME:  (Reserved)      : 0x0
ME:  FW update req   : 0x0
ME:  (Reserved)      : 0x0
ME:  Current state   : 0xb
ME:  Current PM event: 0x9
ME:  Progress code   : 0x3
ME: Requested BIOS Action: Continue to boot
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : YES
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Normal
ME: Current Operation State : M0 without UMA
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : Policy Module
ME: Power Management Event  : Non-power cycle reset
ME: Progress Phase State    : Received DRAM Init Done
memcfg DDR3 ref clock 133 MHz
memcfg DDR3 clock 1330 MHz
memcfg channel assignment: A: 0, B  1, C  2
memcfg channel[0] config (00620010):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 4096 MB width x8 dual rank, selected
   DIMMB 0 MB width x8 single rank
memcfg channel[1] config (00620010):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 4096 MB width x8 dual rank, selected
   DIMMB 0 MB width x8 single rank
CBMEM:
IMD: root @ 7ffff000 254 entries.
IMD: root @ 7fffec00 62 entries.
External stage cache:
IMD: root @ 803ff000 254 entries.
IMD: root @ 803fec00 62 entries.
CBMEM entry for DIMM info: 0x7fffea40
MTRR Range: Start=ff800000 End=0 (Size 800000)
MTRR Range: Start=0 End=1000000 (Size 1000000)
MTRR Range: Start=7f800000 End=80000000 (Size 800000)
MTRR Range: Start=80000000 End=80800000 (Size 800000)
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/postcar'
CBFS: Found @ offset 3c2c0 size 3c28
Decompressing stage fallback/postcar @ 0x7ffcffc0 (32016 bytes)
Loading module at 7ffd0000 with entry 7ffd0000. filesize: 0x3a10 memsize: 0x7cd0
Processing 111 relocs. Offset value of 0x7dfd0000


coreboot-4.9-1236-g2452c8414d Sat Apr  6 13:47:29 UTC 2019 postcar starting (log level: 7)...
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 19d80 size 1a5d2
Decompressing stage fallback/ramstage @ 0x7ff82fc0 (310520 bytes)
Loading module at 7ff83000 with entry 7ff83000. filesize: 0x36e10 memsize: 0x4bcb8
Processing 3642 relocs. Offset value of 0x7f183000


coreboot-4.9-1236-g2452c8414d Sat Apr  6 13:47:29 UTC 2019 ramstage starting (log level: 7)...
Normal boot.
BS: BS_PRE_DEVICE times (us): entry 0 run 2 exit 0
BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 3 exit 0
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/0104] enabled
PCI: Static device PCI: 00:01.0 not found, disabling it.
PCI: 00:02.0 [8086/0126] enabled
PCI: 00:04.0 [8086/0103] enabled
PCI: 00:16.0: Disabling device
PCI: 00:16.0 [8086/1c3a] disabled
PCI: 00:16.1: Disabling device
PCI: 00:16.2: Disabling device
PCI: 00:16.3: Disabling device
PCI: 00:19.0 [8086/1502] enabled
PCI: 00:1a.0 [8086/1c2d] enabled
PCI: 00:1b.0 [8086/1c20] enabled
PCH: PCIe Root Port coalescing is enabled
PCI: 00:1c.0: Disabling device
PCI: 00:1c.0: check set enabled
PCI: 00:1c.0 [8086/1c10] disabled
PCH: Remap PCIe function 1 to 0
PCI: 00:1c.1 [8086/1c12] enabled
PCI: 00:1c.2: Disabling device
PCH: Remap PCIe function 3 to 0
PCI: 00:1c.3 [8086/1c16] enabled
PCI: 00:1c.4: Disabling device
PCI: 00:1c.4: check set enabled
PCI: 00:1c.5: Disabling device
PCH: Remap PCIe function 6 to 0
PCI: 00:1c.6 [8086/1c1c] enabled
PCI: 00:1c.7: Disabling device
PCH: PCIe map 1c.0 -> 1c.6
PCH: PCIe map 1c.1 -> 1c.0
PCH: PCIe map 1c.3 -> 1c.1
PCH: PCIe map 1c.6 -> 1c.3
PCI: 00:1d.0 [8086/1c26] enabled
PCI: 00:1e.0: Disabling device
PCI: 00:1e.0 [8086/2448] disabled
PCI: 00:1f.0 [8086/1c4f] enabled
PCI: 00:1f.2 [8086/1c01] enabled
PCI: 00:1f.3 [8086/1c22] enabled
PCI: 00:1f.5: Disabling device
PCI: 00:1f.5 [8086/1c09] disabled No operations
PCI: 00:1f.6 [8086/1c24] enabled
PCI: Leftover static devices:
PCI: 00:01.0
PCI: 00:16.1
PCI: 00:16.2
PCI: 00:16.3
PCI: 00:1c.2
PCI: 00:1c.4
PCI: 00:1c.5
PCI: 00:1c.7
PCI: Check your devicetree.cb.
PCI: pci_scan_bus for bus 01
PCI: 01:00.0 [8086/0085] enabled
Enabling Common Clock Configuration
ASPM: Enabled L1
Failed to enable LTR for dev = PCI: 01:00.0
scan_bus: scanning of bus PCI: 00:1c.0 took 248 usecs
PCI: pci_scan_bus for bus 02
PCI: 02:00.0 [1180/e823] enabled
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
Failed to enable LTR for dev = PCI: 02:00.0
scan_bus: scanning of bus PCI: 00:1c.1 took 230 usecs
PCI: pci_scan_bus for bus 03
scan_bus: scanning of bus PCI: 00:1c.3 took 45 usecs
PMH7: ID 04 Revision 01
PNP: 00ff.1 enabled
PNP: 0c31.0 enabled
EC Firmware ID 8CHT28WW-3.20, Version 1.01C
H8: BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
PNP: 00ff.2 enabled
Hybrid graphics: Switching panel to integrated GPU.
PNP: 00ff.f disabled
scan_bus: scanning of bus PCI: 00:1f.0 took 5186 usecs
bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
scan_bus: scanning of bus PCI: 00:1f.3 took 26 usecs
scan_bus: scanning of bus DOMAIN: 0000 took 6054 usecs
scan_bus: scanning of bus Root Device took 6061 usecs
done
FMAP: Found "FLASH" version 1.1 at 710000.
FMAP: base = ff800000 size = 800000 #areas = 4
FMAP: area RW_MRC_CACHE found @ 700000 (65536 bytes)
MRC: No data in cbmem for 'RW_MRC_CACHE'.
BS: BS_DEV_ENUMERATE times (us): entry 0 run 6097 exit 19
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
PNP: 00ff.1 missing read_resources
PNP: 00ff.2 missing read_resources
Done reading resources.
skipping PNP: 00ff.2@60 fixed resource, size=0!
skipping PNP: 00ff.2@62 fixed resource, size=0!
skipping PNP: 00ff.2@64 fixed resource, size=0!
skipping PNP: 00ff.2@66 fixed resource, size=0!
Setting resources...
TOUUD 0x27b600000 TOLUD 0x82a00000 TOM 0x200000000
MEBASE 0x1fe000000
IGD decoded, subtracting 32M UMA and 2M GTT
TSEG base 0x80000000 size 8M
Available memory below 4GB: 2048M
Available memory above 4GB: 6070M
PCI: 00:02.0 10 <- [0x00e1400000 - 0x00e17fffff] size 0x00400000 gran 0x16 mem64
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io
PCI: 00:04.0 10 <- [0x00e1920000 - 0x00e1927fff] size 0x00008000 gran 0x0f mem64
PCI: 00:19.0 10 <- [0x00e1900000 - 0x00e191ffff] size 0x00020000 gran 0x11 mem
PCI: 00:19.0 14 <- [0x00e192c000 - 0x00e192cfff] size 0x00001000 gran 0x0c mem
PCI: 00:19.0 18 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io
PCI: 00:1a.0 10 <- [0x00e192f000 - 0x00e192f3ff] size 0x00000400 gran 0x0a mem
PCI: 00:1b.0 10 <- [0x00e1928000 - 0x00e192bfff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:1c.0 20 <- [0x00e1800000 - 0x00e18fffff] size 0x00100000 gran 0x14 bus 01 mem
PCI: 01:00.0 10 <- [0x00e1800000 - 0x00e1801fff] size 0x00002000 gran 0x0d mem64
PCI: 00:1c.1 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io
PCI: 00:1c.1 24 <- [0x00e0c00000 - 0x00e13fffff] size 0x00800000 gran 0x14 bus 02 prefmem
PCI: 00:1c.1 20 <- [0x00e0000000 - 0x00e08fffff] size 0x00900000 gran 0x14 bus 02 mem
PCI: 02:00.0 10 <- [0x00e0800000 - 0x00e08000ff] size 0x00000100 gran 0x08 mem
NONE missing set_resources
PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 00:1c.3 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 mem
PCI: 00:1d.0 10 <- [0x00e1930000 - 0x00e19303ff] size 0x00000400 gran 0x0a mem
PNP: 00ff.1 missing set_resources
PNP: 00ff.2 missing set_resources
PCI: 00:1f.2 10 <- [0x0000003080 - 0x0000003087] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x0000003088 - 0x000000308f] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x0000003094 - 0x0000003097] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e192e000 - 0x00e192e7ff] size 0x00000800 gran 0x0b mem
PCI: 00:1f.3 10 <- [0x00e1931000 - 0x00e19310ff] size 0x00000100 gran 0x08 mem64
PCI: 00:1f.6 10 <- [0x00e192d000 - 0x00e192dfff] size 0x00001000 gran 0x0c mem64
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (us): entry 0 run 1664 exit 0
Enabling resources...
PCI: 00:00.0 subsystem <- 17aa/21d2
PCI: 00:00.0 cmd <- 06
PCI: 00:02.0 subsystem <- 17aa/21d3
PCI: 00:02.0 cmd <- 03
PCI: 00:04.0 cmd <- 02
PCI: 00:19.0 subsystem <- 17aa/21ce
PCI: 00:19.0 cmd <- 103
PCI: 00:1a.0 subsystem <- 17aa/21d2
PCI: 00:1a.0 cmd <- 102
PCI: 00:1b.0 subsystem <- 17aa/21d2
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0003
PCI: 00:1c.0 subsystem <- 17aa/21d2
PCI: 00:1c.0 cmd <- 106
PCI: 00:1c.1 bridge ctrl <- 0003
PCI: 00:1c.1 subsystem <- 17aa/21d2
PCI: 00:1c.1 cmd <- 107
PCI: 00:1c.3 bridge ctrl <- 0003
PCI: 00:1c.3 subsystem <- 17aa/21d2
PCI: 00:1c.3 cmd <- 100
PCI: 00:1d.0 subsystem <- 17aa/21d2
PCI: 00:1d.0 cmd <- 102
pch_decode_init
PCI: 00:1f.0 subsystem <- 17aa/21d2
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.2 subsystem <- 17aa/21d2
PCI: 00:1f.2 cmd <- 03
PCI: 00:1f.3 subsystem <- 17aa/21d2
PCI: 00:1f.3 cmd <- 103
PCI: 00:1f.6 subsystem <- 17aa/21d2
PCI: 00:1f.6 cmd <- 02
PCI: 01:00.0 cmd <- 02
PCI: 02:00.0 cmd <- 06
done.
BS: BS_DEV_ENABLE times (us): entry 0 run 324 exit 0
Found TPM ST33ZP24 by ST Microelectronics
TPM: Startup
TPM: command 0x99 returned 0x0
TPM: Asserting physical presence
TPM: command 0x4000000a returned 0x0
TPM: command 0x65 returned 0x0
TPM: flags disable=0, deactivated=0, nvlocked=1
TPM: setup succeeded
Initializing devices...
Root Device init ...
Root Device init finished in 1 usecs
CPU_CLUSTER: 0 init ...
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x0000000080000000 size 0x7ff40000 type 6
0x0000000080000000 - 0x00000000d0000000 size 0x50000000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x000000027b600000 size 0x17b600000 type 6
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 36 bits
MTRR: default type WB/UC MTRR counts: 4/4.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
MTRR: 1 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
MTRR: 2 base 0x0000000100000000 mask 0x0000000f00000000 type 6
MTRR: 3 base 0x0000000200000000 mask 0x0000000f80000000 type 6

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

CPU has 2 cores, 4 threads enabled.
Setting up SMI for CPU
Will perform SMM setup.
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 13900 size 6400
microcode: sig=0x206a7 pf=0x10 revision=0x2e
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz.
Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170
Processing 16 relocs. Offset value of 0x00030000
Attempting to start 3 APs
Waiting for 10ms after sending INIT.
Waiting for 1st SIPI to complete...done.
Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
done.
AP: slot 3 apic_id 3.
AP: slot 2 apic_id 2.
Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x00038000
SMM Module: stub loaded at 00038000. Will call 7ffa1776(00000000)
Installing SMM handler to 0x80000000
Loading module at 80010000 with entry 80010112. filesize: 0x1390 memsize: 0x53b0
Processing 48 relocs. Offset value of 0x80010000
Loading module at 80008000 with entry 80008000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x80008000
SMM Module: placing jmp sequence at 80007c00 rel16 0x03fd
SMM Module: placing jmp sequence at 80007800 rel16 0x07fd
SMM Module: placing jmp sequence at 80007400 rel16 0x0bfd
SMM Module: stub loaded at 80008000. Will call 80010112(00000000)
Initializing Southbridge SMI...

New SMBASE 0x80000000
In relocation handler: cpu 0
New SMBASE=0x80000000 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7ffffc00
In relocation handler: cpu 1
New SMBASE=0x7ffffc00 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7ffff800
In relocation handler: cpu 2
New SMBASE=0x7ffff800 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7ffff400
In relocation handler: cpu 3
New SMBASE=0x7ffff400 IEDBASE=0x80400000
Writing SMRR. base = 0x80000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
Initializing CPU #0
CPU: vendor Intel device 206a7
CPU: family 06, model 2a, stepping 07
Enabling cache
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz.
CPU: platform id 4
CPU: cpuid(1) 0x206a7
CPU: AES supported
CPU: TXT supported
CPU: VT supported
Setting up local APIC... apic_id: 0x00 done.
IA32_FEATURE_CONTROL already locked; VMX status: enabled
IA32_FEATURE_CONTROL already locked
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2500
Turbo is available but hidden
Turbo has been enabled
CPU #0 initialized
Initializing CPU #1
Initializing CPU #3
Initializing CPU #2
CPU: vendor Intel device 206a7
CPU: family 06, model 2a, stepping 07
CPU: vendor Intel device 206a7
CPU: family 06, model 2a, stepping 07
Enabling cache
CPU: vendor Intel device 206a7
CPU: family 06, model 2a, stepping 07
Enabling cache
Enabling cache
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz.
CPU: platform id 4
CPU: cpuid(1) 0x206a7
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz.
CPU: AES supported
CPU: TXT supported
CPU: VT supported
CPU: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz.
Setting up local APIC...CPU: platform id 4
 apic_id: 0x03 done.
CPU: cpuid(1) 0x206a7
IA32_FEATURE_CONTROL already locked; VMX status: enabled
CPU: AES supported
CPU: TXT supported
CPU: VT supported
IA32_FEATURE_CONTROL already locked
Setting up local APIC...CPU: platform id 4
CPU: cpuid(1) 0x206a7
 apic_id: 0x02 done.
CPU: AES supported
CPU: TXT supported
CPU: VT supported
IA32_FEATURE_CONTROL already locked; VMX status: enabled
Setting up local APIC...IA32_FEATURE_CONTROL already locked
 apic_id: 0x01 done.
IA32_FEATURE_CONTROL already locked; VMX status: enabled
model_x06ax: energy policy set to 6
IA32_FEATURE_CONTROL already locked
model_x06ax: frequency set to 2500
CPU #3 initialized
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2500
CPU #2 initialized
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2500
CPU #1 initialized
bsp_do_flight_plan done after 8 msecs.
Initializing southbridge SMI...
SMI_STS: 
GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO7 GPIO5 GPIO4 GPIO3 GPIO2 
ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI5 GPI4 GPI3 GPI2 GPI1 GPI0 
TCO_STS: 
Locking SMM.
CPU_CLUSTER: 0 init finished in 23625 usecs
PCI: 00:00.0 init ...
Disabling PEG12.
Disabling PEG11.
Disabling PEG10.
Disabling PEG60.
Disabling Device 7.
Disabling PEG IO clock.
Set BIOS_RESET_CPL
CPU TDP: 35 Watts
PCI: 00:00.0 init finished in 1016 usecs
PCI: 00:02.0 init ...
GT Power Management Init
SNB GT2 Power Meter Weights
GT Power Management Init (post VBIOS)

[0.091519] CONFIG =>
[0.091520]   (Primary   =>
[0.091520]      (Port => Internal,
[0.091521]       Framebuffer =>
[0.091521]         (Width     => 640,
[0.091522]          Height    => 400,
[0.091522]          Start_X   => 0,
[0.091523]          Start_Y   => 0,
[0.091523]          Stride    => 1,
[0.091524]          V_Stride  => 1,
[0.091524]          Tiling    => Linear ,
[0.091525]          Rotation  => No_Rotation,
[0.091525]          Offset => 0xffffffff,
[0.091526]          BPC    => 8),
[0.091526]       Mode =>
[0.091527]         (Dotclock           => 138650000,
[0.091527]          H_Visible          => 1920,
[0.091528]          H_Sync_Begin       => 1968,
[0.091528]          H_Sync_End         => 2000,
[0.091529]          H_Total            => 2080,
[0.091529]          V_Visible          => 1080,
[0.091530]          V_Sync_Begin       => 1083,
[0.091530]          V_Sync_End         => 1088,
[0.091531]          V_Total            => 1111,
[0.091532]          H_Sync_Active_High => True,
[0.091532]          V_Sync_Active_High => True,
[0.091533]          BPC                => 6)),
[0.091533]    Secondary =>
[0.091534]      (Port => Disabled,
[0.091534]       Framebuffer =>
[0.091535]         (Width     => 1,
[0.091535]          Height    => 1,
[0.091536]          Start_X   => 0,
[0.091536]          Start_Y   => 0,
[0.091537]          Stride    => 1,
[0.091537]          V_Stride  => 1,
[0.091538]          Tiling    => Linear ,
[0.091538]          Rotation  => No_Rotation,
[0.091539]          Offset => 0x00000000,
[0.091539]          BPC    => 8),
[0.091540]       Mode =>
[0.091540]         (Dotclock           => 19200000,
[0.091541]          H_Visible          => 1,
[0.091541]          H_Sync_Begin       => 1,
[0.091542]          H_Sync_End         => 1,
[0.091542]          H_Total            => 1,
[0.091543]          V_Visible          => 1,
[0.091543]          V_Sync_Begin       => 1,
[0.091544]          V_Sync_End         => 1,
[0.091544]          V_Total            => 1,
[0.091545]          H_Sync_Active_High => False,
[0.091545]          V_Sync_Active_High => False,
[0.091546]          BPC                => 5)),
[0.091546]    Tertiary  =>
[0.091547]      (Port => Disabled,
[0.091547]       Framebuffer =>
[0.091548]         (Width     => 1,
[0.091548]          Height    => 1,
[0.091549]          Start_X   => 0,
[0.091549]          Start_Y   => 0,
[0.091550]          Stride    => 1,
[0.091550]          V_Stride  => 1,
[0.091551]          Tiling    => Linear ,
[0.091551]          Rotation  => No_Rotation,
[0.091552]          Offset => 0x00000000,
[0.091552]          BPC    => 8),
[0.091553]       Mode =>
[0.091553]         (Dotclock           => 19200000,
[0.091554]          H_Visible          => 1,
[0.091554]          H_Sync_Begin       => 1,
[0.091555]          H_Sync_End         => 1,
[0.091555]          H_Total            => 1,
[0.091556]          V_Visible          => 1,
[0.091556]          V_Sync_Begin       => 1,
[0.091557]          V_Sync_End         => 1,
[0.091557]          V_Total            => 1,
[0.091558]          H_Sync_Active_High => False,
[0.091558]          V_Sync_Active_High => False,
[0.091559]          BPC                => 5)));
PCI: 00:02.0 init finished in 42703 usecs
PCI: 00:04.0 init ...
PCI: 00:04.0 init finished in 0 usecs
PCI: 00:19.0 init ...
PCI: 00:19.0 init finished in 0 usecs
PCI: 00:1a.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1a.0 init finished in 12 usecs
PCI: 00:1b.0 init ...
Azalia: base = e1928000
Azalia: codec_mask = 09
Azalia: Initializing codec #3
Azalia: codec viddid: 80862805
Azalia: No verb!
Azalia: Initializing codec #0
Azalia: codec viddid: 14f1506e
Azalia: verb_size: 52
Azalia: verb loaded.
PCI: 00:1b.0 init finished in 4303 usecs
PCI: 00:1c.0 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.0 init finished in 7 usecs
PCI: 00:1c.1 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.1 init finished in 9 usecs
PCI: 00:1c.3 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.3 init finished in 7 usecs
PCI: 00:1d.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1d.0 init finished in 12 usecs
PCI: 00:1f.0 init ...
pch: lpc_init
PCH: detected QM67, device id: 0x1c4f, rev id 0x5
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
Set power off after power failure.
NMI sources disabled.
CougarPoint PM init
RTC: failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
pch_spi_init
PCI: 00:1f.0 init finished in 535 usecs
PCI: 00:1f.2 init ...
SATA: Initializing...
SATA: Controller in AHCI mode.
ABAR: e192e000
PCI: 00:1f.2 init finished in 72 usecs
PCI: 00:1f.3 init ...
PCI: 00:1f.3 init finished in 7 usecs
PCI: 00:1f.6 init ...
PCI: 00:1f.6 init finished in 0 usecs
PCI: 01:00.0 init ...
PCI: 01:00.0 init finished in 0 usecs
PCI: 02:00.0 init ...
PCI: 02:00.0 init finished in 0 usecs
PNP: 00ff.2 init ...
PNP: 00ff.2 init finished in 0 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ...
I2C: 01:54 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ...
I2C: 01:55 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ...
I2C: 01:56 init finished in 0 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ...
I2C: 01:57 init finished in 0 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ...
Locking EEPROM RFID
init EEPROM done
I2C: 01:5c init finished in 11826 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ...
I2C: 01:5d init finished in 0 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ...
I2C: 01:5e init finished in 0 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ...
I2C: 01:5f init finished in 1 usecs
Devices initialized
BS: BS_DEV_INIT times (us): entry 16647 run 84276 exit 0
Finalize devices...
PCI: 00:1f.0 final
Devices finalized
BS: BS_POST_DEVICE times (us): entry 0 run 49 exit 0
BS: BS_OS_RESUME_CHECK times (us): entry 0 run 3 exit 0
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/dsdt.aml'
CBFS: Found @ offset 3ff40 size 388f
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/slic'
CBFS: 'fallback/slic' not found.
ACPI: Writing ACPI tables at 7ff46000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
Found 1 CPU(s) with 4 core(s) each.
PSS: 2501MHz power 35000 control 0x2000 status 0x2000
PSS: 2500MHz power 35000 control 0x1900 status 0x1900
PSS: 2000MHz power 26404 control 0x1400 status 0x1400
PSS: 1600MHz power 20160 control 0x1000 status 0x1000
PSS: 1200MHz power 14397 control 0xc00 status 0xc00
PSS: 800MHz power 9139 control 0x800 status 0x800
PSS: 2501MHz power 35000 control 0x2000 status 0x2000
PSS: 2500MHz power 35000 control 0x1900 status 0x1900
PSS: 2000MHz power 26404 control 0x1400 status 0x1400
PSS: 1600MHz power 20160 control 0x1000 status 0x1000
PSS: 1200MHz power 14397 control 0xc00 status 0xc00
PSS: 800MHz power 9139 control 0x800 status 0x800
PSS: 2501MHz power 35000 control 0x2000 status 0x2000
PSS: 2500MHz power 35000 control 0x1900 status 0x1900
PSS: 2000MHz power 26404 control 0x1400 status 0x1400
PSS: 1600MHz power 20160 control 0x1000 status 0x1000
PSS: 1200MHz power 14397 control 0xc00 status 0xc00
PSS: 800MHz power 9139 control 0x800 status 0x800
PSS: 2501MHz power 35000 control 0x2000 status 0x2000
PSS: 2500MHz power 35000 control 0x1900 status 0x1900
PSS: 2000MHz power 26404 control 0x1400 status 0x1400
PSS: 1600MHz power 20160 control 0x1000 status 0x1000
PSS: 1200MHz power 14397 control 0xc00 status 0xc00
PSS: 800MHz power 9139 control 0x800 status 0x800
Generating ACPI PIRQ entries
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
ACPI:    * H8
H8: BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
\_SB.PCI0.RP01.WIFI:  PCI: 01:00.0
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI: added table 3/32, length now 48
ACPI:    * TCPA
TCPA log created at 7ff35000
ACPI: added table 4/32, length now 52
ACPI:    * MADT
ACPI: added table 5/32, length now 56
current = 7ff4b770
ACPI:     * DMAR
ACPI: added table 6/32, length now 60
current = 7ff4b840
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 3b500 size 572
Found a VBT of 3985 bytes after decompression
GMA: Found VBT in CBFS
GMA: Found valid VBT in CBFS
ACPI:    * HPET
ACPI: added table 7/32, length now 64
ACPI: done.
ACPI tables: 30848 bytes.
smbios_write_tables: 7ff34000
Create SMBIOS type 17
PCI: 01:00.0 (unknown)
SMBIOS tables: 673 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 00000500, 0x10 bytes, checksum dfe7
Writing coreboot table at 0x7ff6a000
 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
 1. 0000000000001000-000000000009ffff: RAM
 2. 00000000000a0000-00000000000fffff: RESERVED
 3. 0000000000100000-000000001fffffff: RAM
 4. 0000000020000000-00000000201fffff: RESERVED
 5. 0000000020200000-000000003fffffff: RAM
 6. 0000000040000000-00000000401fffff: RESERVED
 7. 0000000040200000-000000007ff33fff: RAM
 8. 000000007ff34000-000000007ff82fff: CONFIGURATION TABLES
 9. 000000007ff83000-000000007ffcefff: RAMSTAGE
10. 000000007ffcf000-000000007fffffff: CONFIGURATION TABLES
11. 0000000080000000-00000000829fffff: RESERVED
12. 00000000f0000000-00000000f3ffffff: RESERVED
13. 00000000fed40000-00000000fed44fff: RESERVED
14. 00000000fed90000-00000000fed91fff: RESERVED
15. 0000000100000000-000000027b5fffff: RAM
Manufacturer: c2
SF: Detected MX25L6405D with sector size 0x1000, total 0x800000
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
Wrote coreboot table at: 7ff6a000, 0x38c bytes, checksum e141
coreboot table: 932 bytes.
IMD ROOT    0. 7ffff000 00001000
IMD SMALL   1. 7fffe000 00001000
CONSOLE     2. 7ffde000 00020000
TIME STAMP  3. 7ffdd000 00000910
ROMSTG STCK 4. 7ffd8000 00005000
AFTER CAR   5. 7ffcf000 00009000
RAMSTAGE    6. 7ff82000 0004d000
SMM BACKUP  7. 7ff72000 00010000
COREBOOT    8. 7ff6a000 00008000
ACPI        9. 7ff46000 00024000
ACPI GNVS  10. 7ff45000 00001000
TCPA TCGLOG11. 7ff35000 00010000
SMBIOS     12. 7ff34000 00000800
IMD small region:
  IMD ROOT    0. 7fffec00 00000400
  MEM INFO    1. 7fffea40 000001a9
  ROMSTAGE    2. 7fffea20 00000004
  COREBOOTFWD 3. 7fffe9e0 00000028
BS: BS_WRITE_TABLES times (us): entry 0 run 26245 exit 0
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 43840 size 106f3
Checking segment from ROM address 0xfff53a78
Payload being loaded at below 1MiB without region being marked as RAM usable.
Checking segment from ROM address 0xfff53a94
Loading segment from ROM address 0xfff53a78
  code (compression=1)
  New segment dstaddr 0x000e0d20 memsize 0x1f2e0 srcaddr 0xfff53ab0 filesize 0x106bb
Loading Segment: addr: 0x000e0d20 memsz: 0x000000000001f2e0 filesz: 0x00000000000106bb
using LZMA
Loading segment from ROM address 0xfff53a94
  Entry Point 0x000fd274
BS: BS_PAYLOAD_LOAD times (us): entry 1 run 29438 exit 0
PCH: watchdog disabled
Jumping to boot code at 000fd274(7ff6a000)
SeaBIOS (version rel-1.12.0-0-ga698c89)
BUILD: gcc: (coreboot toolchain v2d22d335dc 2019-03-22) 8.2.0 binutils: (GNU Binutils) 2.32
Found coreboot cbmem console @ 7ffde000
Found mainboard LENOVO ThinkPad T420s
Relocating init from 0x000e2380 to 0x7fee7520 (size 51680)
Found CBFS header at 0xfff10238
multiboot: eax=7ffb94c0, ebx=7ffb9474
Found 16 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0x7ff34000 to 0x000f67a0
Copying ACPI RSDP from 0x7ff46000 to 0x000f6770
Using pmtimer, ioport 0x508
Scan for VGA option rom
Running option rom at c000:0003
pmm call arg1=0
Turning on vga text mode console
SeaBIOS (version rel-1.12.0-0-ga698c89)
Machine UUID 23ffe501-511f-11cb-824e-8948558b60a7
EHCI init on dev 00:1a.0 (regs=0xe192f020)
EHCI init on dev 00:1d.0 (regs=0xe1930020)
AHCI controller at 00:1f.2, iobase 0xe192e000, irq 10
Searching bootorder for: /pci@i0cf8/pci-bridge@1c,1/*@0
Found 0 lpt ports
Found 0 serial ports
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0
AHCI/1: registering: "DVD/CD [AHCI/1: Optiarc DVD RW AD-7930H ATAPI-8 DVD/CD]"
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@0/disk@0
AHCI/0: Set transfer mode to UDMA-6
AHCI/0: registering: "AHCI/0: Samsung SSD 860 EVO 500GB ATA-11 Hard-Disk (465 GiBytes)"
Initialized USB HUB (0 ports used)
Initialized USB HUB (0 ports used)
PS2 keyboard initialized
All threads complete.
Scan for option roms

Press ESC for boot menu.

Select boot device:

1. DVD/CD [AHCI/1: Optiarc DVD RW AD-7930H ATAPI-8 DVD/CD]
2. AHCI/0: Samsung SSD 860 EVO 500GB ATA-11 Hard-Disk (465 GiBytes)

t. TPM Configuration

Searching bootorder for: HALT
drive 0x000f66b0: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=976773168
Space available for UMB: c7000-ed800, f5fc0-f6680
Returned 253952 bytes of ZoneHigh
e820 map has 13 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 0000000020000000 = 1 RAM
  4: 0000000020000000 - 0000000020200000 = 2 RESERVED
  5: 0000000020200000 - 0000000040000000 = 1 RAM
  6: 0000000040000000 - 0000000040200000 = 2 RESERVED
  7: 0000000040200000 - 000000007ff32000 = 1 RAM
  8: 000000007ff32000 - 0000000082a00000 = 2 RESERVED
  9: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  10: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
  11: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
  12: 0000000100000000 - 000000027b600000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00