[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffaafff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffab000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-8641-gebbb0d4-dirty 03/27/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffab max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffaafff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffaafff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB40E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB68A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB4250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB4210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB69A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB7700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB77D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB7980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB79C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB7B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffaafff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048393
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913323 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffab000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292597
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015508K/5242148K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.859 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.71 BogoMIPS (lpj=7639436)
[    0.010954] pid_max: default: 32768 minimum: 301
[    0.015676] ACPI: Core revision 20140424
[    0.022098] ACPI: All ACPI Tables successfully acquired
[    0.027610] Security Framework initialized
[    0.031788] AppArmor: AppArmor disabled by boot time parameter
[    0.037698] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045515] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058828] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068714] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075743] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083700] Initializing cgroup subsys memory
[    0.088166] Initializing cgroup subsys devices
[    0.092718] Initializing cgroup subsys freezer
[    0.097243] Initializing cgroup subsys net_cls
[    0.101777] Initializing cgroup subsys blkio
[    0.106133] Initializing cgroup subsys perf_event
[    0.110930] Initializing cgroup subsys net_prio
[    0.115587] tseg: 0000000000
[    0.115601] CPU: Physical Processor ID: 0
[    0.119734] CPU: Processor Core ID: 0
[    0.124532] mce: CPU supports 6 MCE banks
[    0.128660] LVT offset 0 assigned for vector 0xf9
[    0.133462] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148950] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158082] ftrace: allocating 21601 entries in 85 pages
[    0.173529] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219176] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336311] Performance Events: AMD PMU driver.
[    0.341022] ... version:                0
[    0.345119] ... bit width:              48
[    0.349306] ... generic registers:      4
[    0.353404] ... value mask:             0000ffffffffffff
[    0.358803] ... max period:             00007fffffffffff
[    0.364199] ... fixed-purpose events:   0
[    0.368303] ... event mask:             000000000000000f
[    0.376330] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384637] x86: Booting SMP configuration:
[    0.388926] .... node  #0, CPUs:      #1 #2 #3
[    0.433521] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585082] x86: Booted up 2 nodes, 8 CPUs
[    0.589527] smpboot: Total of 8 processors activated (30558.07 BogoMIPS)
[    0.602137] devtmpfs: initialized
[    0.614121] pinctrl core: initialized pinctrl subsystem
[    0.619594] NET: Registered protocol family 16
[    0.624330] cpuidle: using governor ladder
[    0.628495] cpuidle: using governor menu
[    0.632501] node 0 link 1: io port [1000, 3fff]
[    0.632505] TOM: 00000000e0000000 aka 3584M
[    0.636768] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636772] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636776] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636778] TOM2: 0000000160000000 aka 5632M
[    0.641143] bus: [bus 00-05] on node 0 link 1
[    0.641145] bus: 00 [io  0x0000-0xffff]
[    0.641147] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641148] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641252] ACPI: bus type PCI registered
[    0.645339] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652017] PCI: Using configuration type 1 for base access
[    0.657658] PCI: Using configuration type 1 for extended access
[    0.664273] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670636] mtrr: probably your BIOS does not setup all CPUs.
[    0.676459] mtrr: corrected configuration.
[    0.693201] ACPI: Added _OSI(Module Device)
[    0.697500] ACPI: Added _OSI(Processor Device)
[    0.702023] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706806] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715753] ACPI: Interpreter enabled
[    0.719502] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728950] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738398] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747844] ACPI: (supports S0 S1 S5)
[    0.751602] ACPI: Using IOAPIC for interrupt routing
[    0.756688] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.785256] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791512] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799817] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.839323] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.849442] PCI host bridge to bus 0000:00
[    0.853611] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.859168] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.865425] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.872377] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.879325] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.885590] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.885800] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.885807] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.885929] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.885940] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.885965] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.885973] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.886015] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.886120] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.886134] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.886163] pci 0000:00:02.0: supports D1 D2
[    0.886192] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.886257] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.892071] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.892080] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.892130] pci 0000:00:02.1: supports D1 D2
[    0.892132] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.892195] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.898013] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.898040] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.898068] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.905293] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.911901] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.919130] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.925852] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.925862] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.925867] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.925871] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.925876] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.925881] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.925886] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.925992] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.926002] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.926007] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.926011] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.926016] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.926020] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.926025] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.926197] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.926294] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.932094] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.932141] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.932187] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.937984] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.938039] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.938095] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.943916] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.943966] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.944017] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.949813] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.949862] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.949920] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.955736] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.955898] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.956019] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.956133] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.956235] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.956348] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.956488] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.956613] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.956738] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.956903] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.957091] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.957135] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.957152] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.957164] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.957214] pci 0000:01:04.0: supports D1 D2
[    0.957303] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.962368] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.962371] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.962375] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.962503] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.962542] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.962577] pci 0000:02:00.0: reg 0x30: [mem 0x29c00000-0x29c0ffff pref]
[    0.962659] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.962759] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.972869] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.977926] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.978031] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.978059] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.978170] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.978259] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.988377] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.993433] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.993518] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.998649] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.003738] pci_bus 0000:00: on NUMA node 0
[    1.003843] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.010278] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.016693] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.024377] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.032043] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.039711] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.047370] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.053790] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.060204] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.067870] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.075525] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.083176] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.089612] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.096015] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.103690] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.111338] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.118995] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.128108] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.134834] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.141544] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.148257] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.155247] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.160496] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.166280] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.174474] vgaarb: loaded
[    1.177281] vgaarb: bridge control possible 0000:01:04.0
[    1.182844] PCI: Using ACPI for IRQ routing
[    1.187129] PCI: pci_cache_line_size set to 64 bytes
[    1.187186] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.187189] e820: reserve RAM buffer [mem 0xdffab000-0xdfffffff]
[    1.187507] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.194641] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.199919] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.208651] Switched to clocksource hpet
[    1.224141] pnp: PnP ACPI init
[    1.227360] ACPI: bus type PNP registered
[    1.231992] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.232071] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.232170] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.232249] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.232290] pnp 00:04: [dma 2]
[    1.232332] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.232354] pnp: PnP ACPI: found 5 devices
[    1.236555] ACPI: bus type PNP unregistered
[    1.248612] pci 0000:02:00.0: can't claim BAR 6 [mem 0x29c00000-0x29c0ffff pref]: no compatible bridge window
[    1.258676] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.263728] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.269910] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.276771] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.284109] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.291460] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.296510] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.303379] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.308422] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.315291] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.320354] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.325407] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.325410] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.325413] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.325416] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.325418] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.325421] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.325424] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.325426] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.325430] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.325567] NET: Registered protocol family 2
[    1.330525] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.338308] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.345722] TCP: Hash tables configured (established 65536 bind 65536)
[    1.352412] TCP: reno registered
[    1.355731] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.362006] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.368865] NET: Registered protocol family 1
[    1.373711] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.379917] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.385910] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.391528] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.397111] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.402760] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.408386] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.413990] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.419654] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.425250] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.430837] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.436495] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.442106] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.447697] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.453356] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.458952] pci 0000:01:04.0: Video device with shadowed ROM
[    1.458961] PCI: CLS 64 bytes, default 64
[    1.459068] Unpacking initramfs...
[    1.691840] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.699862] PCI-DMA: Disabling AGP.
[    1.705055] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.710754] PCI-DMA: using GART IOMMU.
[    1.714587] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.726698] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.735038] microcode: CPU0: patch_level=0x01000096
[    1.740043] microcode: CPU1: patch_level=0x01000096
[    1.745049] microcode: CPU2: patch_level=0x01000096
[    1.750052] microcode: CPU3: patch_level=0x01000096
[    1.755066] microcode: CPU4: patch_level=0x01000096
[    1.760059] microcode: CPU5: patch_level=0x01000096
[    1.765053] microcode: CPU6: patch_level=0x01000096
[    1.771151] microcode: CPU7: patch_level=0x01000096
[    1.776244] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.785188] LVT offset 1 assigned for vector 0x400
[    1.790105] IBS: LVT offset 1 assigned
[    1.793979] perf: AMD IBS detected (0x00000007)
[    1.799199] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.805686] audit: initializing netlink subsys (disabled)
[    1.811209] audit: type=2000 audit(1427461958.628:1): initialized
[    1.818118] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.824613] zbud: loaded
[    1.827581] VFS: Disk quotas dquot_6.5.2
[    1.831640] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.838277] msgmni has been set to 9941
[    1.842747] alg: No test for stdrng (krng)
[    1.847050] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.854685] io scheduler noop registered
[    1.858724] io scheduler deadline registered
[    1.863153] io scheduler cfq registered (default)
[    1.868153] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.868280] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.868408] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.868540] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.868691] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.868719] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.868745] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.868771] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.868791] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.875885] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.882506] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.882517] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.889560] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.896170] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.896181] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.903224] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.903235] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.910274] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.910304] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.915975] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.922799] GHES: HEST is not enabled!
[    1.926770] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.953560] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.981339] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.989393] Linux agpgart interface v0.103
[    1.993814] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.004286] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.009446] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.014811] mousedev: PS/2 mouse device common for all mice
[    2.020586] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.025787] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.032287] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.040268] ledtrig-cpu: registered to indicate activity on CPUs
[    2.046474] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.052994] AMD IOMMUv2 functionality not available on this system
[    2.059394] TCP: cubic registered
[    2.062941] NET: Registered protocol family 10
[    2.067886] mip6: Mobile IPv6
[    2.069427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.079673] NET: Registered protocol family 17
[    2.084226] mpls_gso: MPLS GSO support
[    2.088894] registered taskstats version 1
[    2.093813] rtc_cmos rtc_cmos: setting system clock to 2015-03-27 13:12:40 UTC (1427461960)
[    2.102399] PM: Hibernation image not present or could not be loaded.
[    2.104215] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.112247] Write protecting the kernel read-only data: 8192k
[    2.121560] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.130314] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.150472] systemd-udevd[98]: starting version 215
[    2.156016] random: systemd-udevd urandom read with 3 bits of entropy available
[    2.178802] pps_core: LinuxPPS API ver. 1 registered
[    2.183891] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.193582] ACPI: bus type USB registered
[    2.197885] usbcore: registered new interface driver usbfs
[    2.197922] PTP clock support registered
[    2.207583] usbcore: registered new interface driver hub
[    2.213248] usbcore: registered new device driver usb
[    2.213340] tg3.c:v3.137 (May 11, 2014)
[    2.213353] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.213552] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.234850] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.242097] ehci-pci: EHCI PCI platform driver
[    2.246969] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.246982] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.247002] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.247021] ehci-pci 0000:00:02.1: debug port 1
[    2.247066] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.247097] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.256346] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.256406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.256408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.256409] usb usb1: Product: EHCI Host Controller
[    2.256411] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.256412] usb usb1: SerialNumber: 0000:00:02.1
[    2.256777] hub 1-0:1.0: USB hub found
[    2.256787] hub 1-0:1.0: 10 ports detected
[    2.320981] ohci-pci: OHCI PCI platform driver
[    2.325753] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.331434] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.335559] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.335562] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.335564] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.335566] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.335697] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.335866] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.385501] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.432780] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.443210] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.446319] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.446321] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.446322] usb usb2: Product: OHCI PCI host controller
[    2.446323] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.446325] usb usb2: SerialNumber: 0000:00:02.0
[    2.446541] hub 2-0:1.0: USB hub found
[    2.446551] hub 2-0:1.0: 10 ports detected
[    2.491356] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.499314] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.512785] FS-Cache: Loaded
[    2.520003] RPC: Registered named UNIX socket transport module.
[    2.526676] RPC: Registered udp transport module.
[    2.532718] RPC: Registered tcp transport module.
[    2.538817] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.551325] FS-Cache: Netfs 'nfs' registered for caching
[    2.564952] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.612298] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.724148] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.727879] Switched to clocksource tsc
[    4.182168] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.188842] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.195842] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    5.296043] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    5.310216] systemd[1]: Detected architecture 'x86-64'.
[    5.519930] systemd[1]: Inserted module 'autofs4'
[    5.526816] systemd[1]: Set hostname to <cb-test-tgt>.
[    5.563372] random: nonblocking pool is initialized
[    5.858460] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    5.871363] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    5.886725] systemd[1]: Expecting device dev-ttyS0.device...
[    5.903204] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    5.911207] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.918949] systemd[1]: Starting Remote File Systems (Pre).
[    5.935152] systemd[1]: Reached target Remote File Systems (Pre).
[    5.941524] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    5.963078] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.972675] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    5.980881] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.988941] systemd[1]: Starting Paths.
[    6.003056] systemd[1]: Reached target Paths.
[    6.007545] systemd[1]: Starting Encrypted Volumes.
[    6.023124] systemd[1]: Reached target Encrypted Volumes.
[    6.028717] systemd[1]: Starting Swap.
[    6.043027] systemd[1]: Reached target Swap.
[    6.047423] systemd[1]: Starting Root Slice.
[    6.071026] systemd[1]: Created slice Root Slice.
[    6.075954] systemd[1]: Starting User and Session Slice.
[    6.091013] systemd[1]: Created slice User and Session Slice.
[    6.096885] systemd[1]: Starting Delayed Shutdown Socket.
[    6.111013] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.116901] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.135055] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.142200] systemd[1]: Starting Journal Socket (/dev/log).
[    6.159031] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.165129] systemd[1]: Starting Syslog Socket.
[    6.179022] systemd[1]: Listening on Syslog Socket.
[    6.185182] systemd[1]: Starting udev Kernel Socket.
[    6.198975] systemd[1]: Listening on udev Kernel Socket.
[    6.204410] systemd[1]: Starting udev Control Socket.
[    6.218969] systemd[1]: Listening on udev Control Socket.
[    6.224509] systemd[1]: Starting Journal Socket.
[    6.238958] systemd[1]: Listening on Journal Socket.
[    6.244073] systemd[1]: Starting Sockets.
[    6.258946] systemd[1]: Reached target Sockets.
[    6.263607] systemd[1]: Starting System Slice.
[    6.278960] systemd[1]: Created slice System Slice.
[    6.284037] systemd[1]: Starting system-getty.slice.
[    6.298957] systemd[1]: Created slice system-getty.slice.
[    6.304497] systemd[1]: Starting system-serial\x2dgetty.slice.
[    6.322942] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.330008] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    6.352129] systemd[1]: Mounting Debug File System...
[    6.380059] systemd[1]: Started Set Up Additional Binary Formats.
[    6.386350] systemd[1]: Mounting Huge Pages File System...
[    6.447045] systemd[1]: Starting Load Kernel Modules...
[    6.464955] systemd[1]: Mounting POSIX Message Queue File System...
[    6.484723] systemd[1]: Starting udev Coldplug all Devices...
[    6.500716] systemd[1]: Starting Journal Service...
[    6.526986] systemd[1]: Started Journal Service.
[    6.985397] systemd-udevd[184]: starting version 215
[    7.271931] systemd-journald[167]: Received request to flush runtime journal from PID 1
[    7.704996] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    7.712955] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    7.768954] EDAC MC: Ver: 3.0.0
[    7.787296] SCSI subsystem initialized
[    7.842174] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    7.850716] ACPI: Power Button [PWRB]
[    7.854675] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    7.862216] ACPI: Power Button [PWRF]
[    7.866941] MCE: In-kernel MCE decoding enabled.
[    7.874332] FDC 0 is a post-1991 82077
[    7.896395] libata version 3.00 loaded.
[    7.900481] AMD64 EDAC driver v3.4.0
[    7.902523] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[    7.902554] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    7.918466] acpi-cpufreq: overriding BIOS provided _PSD data
[    7.925413] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.033380] kvm: Nested Virtualization enabled
[    8.037977] kvm: Nested Paging enabled
[   11.137245] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   11.142745] EDAC amd64: DRAM ECC enabled.
[   11.142757] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.153741] EDAC amd64: F10h detected (node 0).
[   11.158448] EDAC MC: DCT0 chip selects:
[   11.158452] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.163282] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.168070] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.172883] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   11.177747] EDAC MC: DCT1 chip selects:
[   11.177757] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.182582] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.187432] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.192241] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   11.197075] EDAC amd64: using x4 syndromes.
[   11.201368] EDAC amd64: MCT channel count: 2
[   11.205847] EDAC amd64: CS6: Registered DDR2 RAM
[   11.210561] EDAC amd64: CS7: Registered DDR2 RAM
[   11.215666] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   11.225575] EDAC amd64: DRAM ECC enabled.
[   11.229817] EDAC amd64: F10h detected (node 1).
[   11.234471] EDAC MC: DCT0 chip selects:
[   11.234475] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   11.239299] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.244102] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.248899] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.253703] EDAC MC: DCT1 chip selects:
[   11.253706] EDAC amd64: MC: 0:     0MB 1:     0MB
[   11.258496] EDAC amd64: MC: 2:     0MB 3:     0MB
[   11.263296] EDAC amd64: MC: 4:     0MB 5:     0MB
[   11.268087] EDAC amd64: MC: 6:     0MB 7:     0MB
[   11.272878] EDAC amd64: using x4 syndromes.
[   11.277176] EDAC amd64: MCT channel count: 1
[   11.281601] EDAC amd64: CS0: Registered DDR2 RAM
[   11.286546] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   11.296451] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   11.307910] sata_nv 0000:00:07.0: version 3.5
[   11.308347] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   11.315045] scsi0 : sata_nv
[   11.318255] scsi1 : sata_nv
[   11.321231] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   11.328485] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   11.336013] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   11.342368] scsi2 : sata_nv
[   11.345474] scsi3 : sata_nv
[   11.348413] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   11.355640] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   11.362960] pata_amd 0000:00:06.0: version 0.4.1
[   11.363707] scsi4 : pata_amd
[   11.366887] scsi5 : pata_amd
[   11.370111] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   11.377218] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   11.645069] ata1: SATA link down (SStatus 0 SControl 300)
[   11.673060] ata3: SATA link down (SStatus 0 SControl 300)
[   11.960947] ata2: SATA link down (SStatus 0 SControl 300)
[   12.276846] ata4: SATA link down (SStatus 0 SControl 300)