[    0.000000] Linux version 4.9.0-3-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.30-1 (2017-06-04)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff0ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff10000-0x00000000bfffffff] type 16
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 23255A9/23255A9, BIOS CBET4000 4.6-300-g4c9cf304c7 06/04/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FE0000000 uncachable
[    0.000000]   1 base 0E0000000 mask FF0000000 write-combining
[    0.000000]   2 base 0F0000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0xbff10 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff91db40099000] 99000 size 24576
[    0.000000] BRK [0x19a52e000, 0x19a52efff] PGTABLE
[    0.000000] BRK [0x19a52f000, 0x19a52ffff] PGTABLE
[    0.000000] BRK [0x19a530000, 0x19a530fff] PGTABLE
[    0.000000] BRK [0x19a531000, 0x19a531fff] PGTABLE
[    0.000000] BRK [0x19a532000, 0x19a532fff] PGTABLE
[    0.000000] BRK [0x19a533000, 0x19a533fff] PGTABLE
[    0.000000] BRK [0x19a534000, 0x19a534fff] PGTABLE
[    0.000000] BRK [0x19a535000, 0x19a535fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x35867000-0x36c2afff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFF220E0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFF25790 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFF22280 00350A (v02 COREv4 COREBOOT 20110725 INTL 20161222)
[    0.000000] ACPI: FACS 0x00000000BFF22240 000040
[    0.000000] ACPI: FACS 0x00000000BFF22240 000040
[    0.000000] ACPI: SSDT 0x00000000BFF25890 00189A (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: MCFG 0x00000000BFF27130 00003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: TCPA 0x00000000BFF27170 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFF271B0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DMAR 0x00000000BFF27220 0000A8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFF292D0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x43b5ef000-0x43b5f3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000043b5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bff0ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000043b5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff]
[    0.000000] On node 0 totalpages: 4175023
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12221 pages used for memmap
[    0.000000]   DMA32 zone: 782096 pages, LIFO batch:31
[    0.000000]   Normal zone: 52952 pages used for memmap
[    0.000000]   Normal zone: 3388928 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000c0a00000-0x00000000c29fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff10000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed91fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed92000-0xffffffff]
[    0.000000] e820: [mem 0xc2a00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 35 pages/cpu @ffff91df7b200000 s103512 r8192 d31656 u524288
[    0.000000] pcpu-alloc: s103512 r8192 d31656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 4109764
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.9.0-3-amd64 root=UUID=f545d1ea-3103-4100-8a85-54db5c9634ad ro quiet iomem=relaxed
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 16335384K/16700092K available (6183K kernel code, 1136K rwdata, 2852K rodata, 1392K init, 688K bss, 364708K reserved, 0K cma-reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:456 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2593.878 MHz processor
[    0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 5187.75 BogoMIPS (lpj=10375512)
[    0.000026] pid_max: default: 32768 minimum: 301
[    0.000038] ACPI: Core revision 20160831
[    0.002570] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.002611] Security Framework initialized
[    0.002612] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.002618] AppArmor: AppArmor disabled by boot time parameter
[    0.003326] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.007043] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.008742] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.008755] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.009043] CPU: Physical Processor ID: 0
[    0.009044] CPU: Processor Core ID: 0
[    0.009051] mce: CPU supports 7 MCE banks
[    0.009059] CPU0: Thermal monitoring enabled (TM1)
[    0.009067] process: using mwait in idle threads
[    0.009070] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.009070] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.009452] Freeing SMP alternatives memory: 24K (ffffffff9927a000 - ffffffff99280000)
[    0.011590] ftrace: allocating 25146 entries in 99 pages
[    0.022493] smpboot: Max logical packages: 2
[    0.022497] DMAR: Host address width 36
[    0.022498] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.022506] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.022507] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.022510] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.022511] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.022512] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.022513] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.022790] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.022791] x2apic enabled
[    0.022796] Switched APIC routing to cluster x2apic.
[    0.023252] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062941] TSC deadline timer enabled
[    0.062944] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.062947] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.062974] ... version:                3
[    0.062974] ... bit width:              48
[    0.062975] ... generic registers:      4
[    0.062975] ... value mask:             0000ffffffffffff
[    0.062976] ... max period:             00007fffffffffff
[    0.062976] ... fixed-purpose events:   3
[    0.062977] ... event mask:             000000070000000f
[    0.063498] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.063596] x86: Booting SMP configuration:
[    0.063597] .... node  #0, CPUs:      #1 #2 #3
[    0.305070] x86: Booted up 1 node, 4 CPUs
[    0.305072] smpboot: Total of 4 processors activated (20754.49 BogoMIPS)
[    0.308238] devtmpfs: initialized
[    0.308301] x86/mm: Memory block size: 128MB
[    0.312561] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.312570] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.312608] pinctrl core: initialized pinctrl subsystem
[    0.312710] NET: Registered protocol family 16
[    0.327785] cpuidle: using governor ladder
[    0.339794] cpuidle: using governor menu
[    0.339843] ACPI: bus type PCI registered
[    0.339845] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.339927] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.339928] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.339936] PCI: Using configuration type 1 for base access
[    0.339970] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.355952] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.356170] ACPI: Added _OSI(Module Device)
[    0.356171] ACPI: Added _OSI(Processor Device)
[    0.356172] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.356172] ACPI: Added _OSI(Processor Aggregator Device)
[    0.356301] ACPI: Executed 1 blocks of module-level executable AML code
[    0.358227] ACPI : EC: EC started
[    0.358228] ACPI : EC: interrupt blocked
[    0.358270] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.358271] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.358272] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.358273] ACPI: Interpreter enabled
[    0.358288] ACPI: (supports S0 S3 S4 S5)
[    0.358289] ACPI: Using IOAPIC for interrupt routing
[    0.358307] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.362158] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.362162] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.362206] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.362214] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.362394] PCI host bridge to bus 0000:00
[    0.362396] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.362397] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.362398] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.362399] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.362400] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.362401] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.362402] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.362403] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.362404] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.362405] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.362406] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.362407] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.362408] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.362409] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.362410] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.362411] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.362412] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xf7ffffff window]
[    0.362413] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.362414] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.362421] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.362503] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.362512] pci 0000:00:02.0: reg 0x10: [mem 0xf1000000-0xf13fffff 64bit]
[    0.362518] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.362522] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.362594] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[    0.362602] pci 0000:00:04.0: reg 0x10: [mem 0xf1630000-0xf1637fff 64bit]
[    0.362694] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.362714] pci 0000:00:14.0: reg 0x10: [mem 0xf1620000-0xf162ffff 64bit]
[    0.362782] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.362815] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.362881] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.362959] pci 0000:00:16.0: reg 0x10: [mem 0xf1641000-0xf164100f 64bit]
[    0.363290] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.363384] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.363399] pci 0000:00:19.0: reg 0x10: [mem 0xf1600000-0xf161ffff]
[    0.363407] pci 0000:00:19.0: reg 0x14: [mem 0xf163c000-0xf163cfff]
[    0.363415] pci 0000:00:19.0: reg 0x18: [io  0x3040-0x305f]
[    0.363473] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.363537] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.363554] pci 0000:00:1a.0: reg 0x10: [mem 0xf163e000-0xf163e3ff]
[    0.363636] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.363670] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.363708] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.363725] pci 0000:00:1b.0: reg 0x10: [mem 0xf1638000-0xf163bfff 64bit]
[    0.363795] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.363835] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.363878] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.364002] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.364088] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.364213] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.364299] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.364423] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.364509] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.364526] pci 0000:00:1d.0: reg 0x10: [mem 0xf163f000-0xf163f3ff]
[    0.364608] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.364642] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.364679] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.364838] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.364854] pci 0000:00:1f.2: reg 0x10: [io  0x3080-0x3087]
[    0.364862] pci 0000:00:1f.2: reg 0x14: [io  0x3090-0x3093]
[    0.364870] pci 0000:00:1f.2: reg 0x18: [io  0x3088-0x308f]
[    0.364878] pci 0000:00:1f.2: reg 0x1c: [io  0x3094-0x3097]
[    0.364886] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.364894] pci 0000:00:1f.2: reg 0x24: [mem 0xf163d000-0xf163d7ff]
[    0.364938] pci 0000:00:1f.2: PME# supported from D3hot
[    0.365002] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.365017] pci 0000:00:1f.3: reg 0x10: [mem 0xf1640000-0xf16400ff 64bit]
[    0.365037] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.365209] pci 0000:01:00.0: [1180:e822] type 00 class 0x080501
[    0.365241] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[    0.365276] pci 0000:01:00.0: reg 0x10: [mem 0xf1400000-0xf14000ff]
[    0.365580] pci 0000:01:00.0: supports D1 D2
[    0.365581] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.377127] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.377138] pci 0000:00:1c.0:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.377256] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000
[    0.377298] pci 0000:02:00.0: reg 0x10: [mem 0xf1500000-0xf151ffff 64bit]
[    0.377381] pci 0000:02:00.0: reg 0x30: [mem 0xf1520000-0xf152ffff pref]
[    0.377498] pci 0000:02:00.0: supports D1
[    0.377499] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    0.389129] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.389139] pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.389245] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.389249] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.389254] pci 0000:00:1c.2:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.389261] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.389372] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.389416] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.389457] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.389497] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.389538] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.389578] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.389619] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[    0.389659] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.390240] ACPI: Enabled 1 GPEs in block 00 to 3F
[    0.390298] ACPI : EC: interrupt unblocked
[    0.390303] ACPI : EC: event unblocked
[    0.390310] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.390311] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.390405] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.390406] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.390408] vgaarb: loaded
[    0.390409] vgaarb: bridge control possible 0000:00:02.0
[    0.390473] PCI: Using ACPI for IRQ routing
[    0.391944] PCI: pci_cache_line_size set to 64 bytes
[    0.392027] e820: reserve RAM buffer [mem 0xbff10000-0xbfffffff]
[    0.392028] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
[    0.392161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.392165] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.394187] clocksource: Switched to clocksource hpet
[    0.400054] VFS: Disk quotas dquot_6.6.0
[    0.400080] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.400158] pnp: PnP ACPI init
[    0.400240] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.400241] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.400242] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.400244] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.400245] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.400246] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.400247] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.400248] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.400250] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
[    0.400251] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
[    0.400253] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.400725] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.400727] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.400767] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.400768] system 00:02: [io  0x0480-0x04bf] has been reserved
[    0.400770] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.400791] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.400820] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.400846] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.400872] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active)
[    0.400888] pnp: PnP ACPI: found 7 devices
[    0.407081] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.407121] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.407129] pci 0000:00:1c.0:   bridge window [mem 0xf1400000-0xf14fffff]
[    0.407140] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.407146] pci 0000:00:1c.1:   bridge window [mem 0xf1500000-0xf15fffff]
[    0.407157] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.407160] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
[    0.407166] pci 0000:00:1c.2:   bridge window [mem 0xf0800000-0xf0ffffff]
[    0.407170] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.407179] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.407180] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.407181] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.407182] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.407183] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.407184] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.407185] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.407186] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.407187] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.407188] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.407189] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.407190] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.407191] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.407192] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.407193] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.407194] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.407195] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xf7ffffff window]
[    0.407196] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.407198] pci_bus 0000:01: resource 1 [mem 0xf1400000-0xf14fffff]
[    0.407199] pci_bus 0000:02: resource 1 [mem 0xf1500000-0xf15fffff]
[    0.407200] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.407201] pci_bus 0000:03: resource 1 [mem 0xf0800000-0xf0ffffff]
[    0.407202] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.407286] NET: Registered protocol family 2
[    0.407466] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.407657] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.407764] TCP: Hash tables configured (established 131072 bind 65536)
[    0.407790] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.407828] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.407900] NET: Registered protocol family 1
[    0.407913] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.408478] PCI: CLS 64 bytes, default 64
[    0.408523] Unpacking initramfs...
[    0.732001] Freeing initrd memory: 20240K (ffff91db75867000 - ffff91db76c2b000)
[    0.732091] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.732093] software IO TLB [mem 0xbbf10000-0xbff10000] (64MB) mapped at [ffff91dbfbf10000-ffff91dbfff0ffff]
[    0.732412] audit: initializing netlink subsys (disabled)
[    0.732427] audit: type=2000 audit(1497524481.728:1): initialized
[    0.732785] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[    0.732822] zbud: loaded
[    0.733438] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.733466] io scheduler noop registered
[    0.733466] io scheduler deadline registered
[    0.733477] io scheduler cfq registered (default)
[    0.734205] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.734206] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.734211] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[    0.734239] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.734240] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.734245] pcie_pme 0000:00:1c.1:pcie001: service driver pcie_pme loaded
[    0.734262] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.734267] pcie_pme 0000:00:1c.2:pcie001: service driver pcie_pme loaded
[    0.734275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.734286] pciehp 0000:00:1c.2:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.734315] pciehp 0000:00:1c.2:pcie004: service driver pciehp loaded
[    0.734319] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.734331] efifb: probing for efifb
[    0.734343] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[    0.734344] efifb: mode is 1376x768x32, linelength=5504, pages=1
[    0.734344] efifb: scrolling: redraw
[    0.734345] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.736570] Console: switching to colour frame buffer device 172x48
[    0.738703] fb0: EFI VGA frame buffer device
[    0.738709] intel_idle: MWAIT substates: 0x21120
[    0.738710] intel_idle: v0.4.1 model 0x3A
[    0.738852] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.739198] GHES: HEST is not enabled!
[    0.739253] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.739613] Linux agpgart interface v0.103
[    0.754266] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78)
[    0.866417] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.866417] AMD IOMMUv2 functionality not available on this system
[    0.866749] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.868489] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.868493] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.868673] mousedev: PS/2 mouse device common for all mice
[    0.868711] rtc_cmos 00:03: RTC can wake from S4
[    0.868928] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.868961] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.868971] intel_pstate: Intel P-state driver initializing
[    0.869416] ledtrig-cpu: registered to indicate activity on CPUs
[    0.869825] NET: Registered protocol family 10
[    0.870279] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.870427] mip6: Mobile IPv6
[    0.870431] NET: Registered protocol family 17
[    0.870435] mpls_gso: MPLS GSO support
[    0.870779] microcode: sig=0x306a9, pf=0x10, revision=0x1b
[    0.870870] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.871067] registered taskstats version 1
[    0.871091] zswap: loaded using pool lzo/zbud
[    1.034835] rtc_cmos 00:03: setting system clock to 2017-06-15 11:01:22 UTC (1497524482)
[    1.034902] PM: Hibernation image not present or could not be loaded.
[    1.037033] Freeing unused kernel memory: 1392K (ffffffff9911e000 - ffffffff9927a000)
[    1.037035] Write protecting the kernel read-only data: 12288k
[    1.037881] Freeing unused kernel memory: 1992K (ffff91dcd9c0e000 - ffff91dcd9e00000)
[    1.042728] Freeing unused kernel memory: 1244K (ffff91dcda0c9000 - ffff91dcda200000)
[    1.053749] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.140267] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.140346] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.140356] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.140367] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.141159] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.141194] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.142959] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.143059] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.143087] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.143574] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.178576] pps_core: LinuxPPS API ver. 1 registered
[    1.178578] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.179022] PTP clock support registered
[    1.180347] ACPI: bus type USB registered
[    1.180399] usbcore: registered new interface driver usbfs
[    1.180422] usbcore: registered new interface driver hub
[    1.180461] usbcore: registered new device driver usb
[    1.180679] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.180680] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.180773] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.181047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.181263] ehci-pci: EHCI PCI platform driver
[    1.182437] thermal LNXTHERM:00: registered as thermal_zone0
[    1.182439] ACPI: Thermal Zone [THM0] (67 C)
[    1.193182] thermal LNXTHERM:01: registered as thermal_zone1
[    1.193184] ACPI: Thermal Zone [THM1] (27 C)
[    1.194441] SCSI subsystem initialized
[    1.195926] AVX version of gcm_enc/dec engaged.
[    1.195927] AES CTR mode by8 optimization enabled
[    1.196148] libata version 3.00 loaded.
[    1.196373] sdhci: Secure Digital Host Controller Interface driver
[    1.196374] sdhci: Copyright(c) Pierre Ossman
[    1.196723] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e822] (rev 7)
[    1.198596] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[    1.324292] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.449645] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:b6:6c:5b
[    1.449648] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.449708] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[    1.450057] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.450076] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.450101] ehci-pci 0000:00:1a.0: debug port 2
[    1.454026] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.454074] ehci-pci 0000:00:1a.0: irq 21, io mem 0xf163e000
[    1.466341] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.466427] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.466429] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.466431] usb usb1: Product: EHCI Host Controller
[    1.466433] usb usb1: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    1.466434] usb usb1: SerialNumber: 0000:00:1a.0
[    1.466789] hub 1-0:1.0: USB hub found
[    1.466800] hub 1-0:1.0: 3 ports detected
[    1.467209] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.467217] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.467236] ehci-pci 0000:00:1d.0: debug port 2
[    1.471144] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.471168] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf163f000
[    1.486373] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.486441] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.486443] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.486445] usb usb2: Product: EHCI Host Controller
[    1.486446] usb usb2: Manufacturer: Linux 4.9.0-3-amd64 ehci_hcd
[    1.486448] usb usb2: SerialNumber: 0000:00:1d.0
[    1.486757] hub 2-0:1.0: USB hub found
[    1.486766] hub 2-0:1.0: 3 ports detected
[    1.487286] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.488347] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.488357] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.489469] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[    1.489477] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.489787] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.489790] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.489791] usb usb3: Product: xHCI Host Controller
[    1.489793] usb usb3: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[    1.489794] usb usb3: SerialNumber: 0000:00:14.0
[    1.490090] hub 3-0:1.0: USB hub found
[    1.490112] hub 3-0:1.0: 4 ports detected
[    1.490453] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.490460] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.490615] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.490617] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.490619] usb usb4: Product: xHCI Host Controller
[    1.490620] usb usb4: Manufacturer: Linux 4.9.0-3-amd64 xhci-hcd
[    1.490622] usb usb4: SerialNumber: 0000:00:14.0
[    1.490797] hub 4-0:1.0: USB hub found
[    1.490825] hub 4-0:1.0: 4 ports detected
[    1.491218] ahci 0000:00:1f.2: version 3.0
[    1.491501] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.501633] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[    1.501637] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
[    1.502625] scsi host0: ahci
[    1.502786] scsi host1: ahci
[    1.502921] scsi host2: ahci
[    1.503046] scsi host3: ahci
[    1.503169] scsi host4: ahci
[    1.503296] scsi host5: ahci
[    1.503369] ata1: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d100 irq 31
[    1.503372] ata2: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d180 irq 31
[    1.503374] ata3: SATA max UDMA/133 abar m2048@0xf163d000 port 0xf163d200 irq 31
[    1.503375] ata4: DUMMY
[    1.503376] ata5: DUMMY
[    1.503377] ata6: DUMMY
[    1.762359] tsc: Refined TSC clocksource calibration: 2594.106 MHz
[    1.762369] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns
[    1.794378] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.814370] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.817147] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.817916] ata1.00: ATA-9: WDC WD10SPCX-08HWST0, 01.01A01, max UDMA/133
[    1.817919] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.818834] ata1.00: configured for UDMA/133
[    1.819338] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10SPCX-08H 1A01 PQ: 0 ANSI: 5
[    1.942847] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.942850] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.943316] hub 1-1:1.0: USB hub found
[    1.943444] hub 1-1:1.0: 6 ports detected
[    1.960592] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[    1.962847] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.962850] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.963157] hub 2-1:1.0: USB hub found
[    1.963305] hub 2-1:1.0: 8 ports detected
[    1.991418] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[    2.050054] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905
[    2.050076] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.052825] random: fast init done
[    2.087805] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    2.177233] ata2: SATA link down (SStatus 0 SControl 300)
[    2.230403] usb 1-1.4: new full-speed USB device number 3 using ehci-pci
[    2.250410] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[    2.343096] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
[    2.343100] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.343102] usb 1-1.4: Product: Broadcom Bluetooth Device
[    2.343103] usb 1-1.4: Manufacturer: Broadcom Corp
[    2.343105] usb 1-1.4: SerialNumber: 7CE9D3B7FC24
[    2.364615] usb 2-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[    2.364619] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.364621] usb 2-1.6: Product: GemPC Express
[    2.364622] usb 2-1.6: Manufacturer: Gemplus
[    2.422408] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[    2.493385] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.495731] ata3.00: ATA-8: LITEONIT LSS-32L6G-HP, DS51704, max UDMA/133
[    2.495734] ata3.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.496240] ata3.00: configured for UDMA/133
[    2.496635] scsi 2:0:0:0: Direct-Access     ATA      LITEONIT LSS-32L 704  PQ: 0 ANSI: 5
[    2.530123] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.530129] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.530238] sd 2:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[    2.530240] sd 0:0:0:0: [sda] Write Protect is off
[    2.530245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.530298] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.530440] sd 2:0:0:0: [sdb] Write Protect is off
[    2.530446] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.530506] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.532792]  sdb: sdb1 sdb2 sdb3 sdb5 sdb6 sdb7
[    2.533895] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.538339] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b2ea
[    2.538342] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.538344] usb 1-1.6: Product: Integrated Camera
[    2.538346] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    2.586569]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[    2.588099] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.718224] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    2.786633] clocksource: Switched to clocksource tsc
[    2.909223] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3
[    3.560321] md: linear personality registered for level -1
[    3.562918] md: multipath personality registered for level -4
[    3.564764] md: raid0 personality registered for level 0
[    3.566951] md: raid1 personality registered for level 1
[    3.634488] raid6: sse2x1   gen()  4455 MB/s
[    3.702480] raid6: sse2x1   xor()  4741 MB/s
[    3.770489] raid6: sse2x2   gen()  9632 MB/s
[    3.838494] raid6: sse2x2   xor()  7888 MB/s
[    3.906498] raid6: sse2x4   gen() 13075 MB/s
[    3.974506] raid6: sse2x4   xor()  9684 MB/s
[    3.974508] raid6: using algorithm sse2x4 gen() 13075 MB/s
[    3.974509] raid6: .... xor() 9684 MB/s, rmw enabled
[    3.974510] raid6: using ssse3x2 recovery algorithm
[    3.974901] xor: automatically using best checksumming function   avx       
[    3.975044] async_tx: api initialized (async)
[    3.976182] md: raid6 personality registered for level 6
[    3.976183] md: raid5 personality registered for level 5
[    3.976184] md: raid4 personality registered for level 4
[    3.980911] md: raid10 personality registered for level 10
[    3.989552] Btrfs loaded, crc32c=crc32c-intel
[    4.705056] PM: Starting manual resume from disk
[    4.705063] PM: Hibernation image partition 8:2 present
[    4.705064] PM: Looking for hibernation image.
[    4.705281] PM: Image not found (code -22)
[    4.705283] PM: Hibernation image not present or could not be loaded.
[    4.793163] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: (null)
[    4.933887] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.940802] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.940993] systemd[1]: Detected architecture x86-64.
[    4.941186] systemd[1]: Set hostname to <universi-mcbk52>.
[    5.090263] systemd[1]: hdapsd.service: Cannot add dependency job, ignoring: Unit hdapsd.service is masked.
[    5.090280] systemd[1]: transmission-daemon.service: Cannot add dependency job, ignoring: Unit transmission-daemon.service is masked.
[    5.091537] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.091614] systemd[1]: Reached target Libvirt guests shutdown.
[    5.091636] systemd[1]: Reached target User and Group Name Lookups.
[    5.091671] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.091707] systemd[1]: Listening on LVM2 metadata daemon socket.
[    5.112701] random: crng init done
[    5.120777] EXT4-fs (sdb5): re-mounted. Opts: discard,user_xattr,errors=remount-ro
[    5.132446] RPC: Registered named UNIX socket transport module.
[    5.132447] RPC: Registered udp transport module.
[    5.132448] RPC: Registered tcp transport module.
[    5.132448] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.133506] lp: driver loaded but no devices found
[    5.135119] ppdev: user-space parallel port driver
[    5.150893] Key type encrypted registered
[    5.268062] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input4
[    5.268066] ACPI: Sleep Button [SLPB]
[    5.268248] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input5
[    5.268252] ACPI: Lid Switch [LID]
[    5.268307] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    5.268309] ACPI: Power Button [PWRF]
[    5.289523] ACPI: Battery Slot [BAT0] (battery present)
[    5.289717] ACPI: Battery Slot [BAT1] (battery absent)
[    5.292550] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.295465] ACPI: AC Adapter [AC] (on-line)
[    5.296009] Non-volatile memory driver v1.3
[    5.297042] [drm] Initialized
[    5.331074] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    5.331075] thinkpad_acpi: http://ibm-acpi.sf.net/
[    5.331076] thinkpad_acpi: ThinkPad BIOS CBET4000 4.6-300-g4c9cf304c7, EC G2HT35WW-3.22
[    5.331077] thinkpad_acpi: Lenovo ThinkPad X230, model 23255A9
[    5.332776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.332904] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    5.338960] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    5.339060] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    5.339060] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    5.341008] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    5.341096] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    5.342337] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7
[    5.362754] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    5.415002] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.415003] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.415004] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.415005] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.418889] ath: phy0: Killer Wireless card detected
[    5.430299] ath: phy0: ASPM enabled: 0x43
[    5.430302] ath: EEPROM regdomain: 0x60
[    5.430303] ath: EEPROM indicates we should expect a direct regpair map
[    5.430304] ath: Country alpha2 being used: 00
[    5.430305] ath: Regpair used: 0x60
[    5.433568] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.433836] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffba0902580000, irq=17
[    5.820654] EXT4-fs (sdb3): mounting ext2 file system using the ext4 subsystem
[    5.824412] EXT4-fs (sdb3): mounted filesystem without journal. Opts: user_xattr
[    5.844628] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    5.997579] Adding 8389628k swap on /dev/sda2.  Priority:-1 extents:1 across:8389628k FS
[    6.895006] media: Linux media interface: v0.10
[    6.903198] Linux video capture interface: v2.00
[    6.905392] Bluetooth: Core ver 2.22
[    6.905412] NET: Registered protocol family 31
[    6.905414] Bluetooth: HCI device and connection manager initialized
[    6.905419] Bluetooth: HCI socket layer initialized
[    6.905423] Bluetooth: L2CAP socket layer initialized
[    6.905433] Bluetooth: SCO socket layer initialized
[    7.063213] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2ea)
[    7.063699] usbcore: registered new interface driver btusb
[    7.065268] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[    7.065275] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[    7.065279] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[    7.065284] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[    7.065496] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9
[    7.065635] usbcore: registered new interface driver uvcvideo
[    7.065638] USB Video Class driver (1.1.1)
[    7.298832] mei_me 0000:00:16.0: wait hw ready failed
[    7.298884] mei_me 0000:00:16.0: hw_start failed ret = -62
[    7.298939] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    7.750264] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.597847] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: user_xattr
[    8.695616] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: discard,user_xattr
[    8.702761] systemd-journald[274]: Received request to flush runtime journal from PID 1
[    8.739310] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.279207] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.314992] mei_me 0000:00:16.0: wait hw ready failed
[    9.315037] mei_me 0000:00:16.0: hw_start failed ret = -62
[    9.315082] mei_me 0000:00:16.0: H_RST is set = 0x80000015
[    9.376989] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: user_xattr
[    9.671738] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: user_xattr
[   10.340442] nfc: nfc_init: NFC Core ver 0.1
[   10.341021] NET: Registered protocol family 39
[   10.352376] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   10.352378] Bluetooth: BNEP filters: protocol multicast
[   10.352382] Bluetooth: BNEP socket layer initialized
[   11.331165] mei_me 0000:00:16.0: wait hw ready failed
[   11.331191] mei_me 0000:00:16.0: hw_start failed ret = -62
[   11.331210] mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
[   11.331235] mei_me 0000:00:16.0: reset failed ret = -19
[   11.331251] mei_me 0000:00:16.0: link layer initialization failed.
[   11.331270] mei_me 0000:00:16.0: init hw failure.
[   11.331388] mei_me 0000:00:16.0: initialization failed.
[   11.331503] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\PMIO) (20160831/utaddress-247)
[   11.331509] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.331512] ACPI Warning: SystemIO range 0x00000000000004C0-0x00000000000004CF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[   11.331516] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.331517] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[   11.331520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.331521] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x0000000000000480-0x00000000000004EB (\GPIO) (20160831/utaddress-247)
[   11.331524] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.331525] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   11.332581] [drm] Memory usable by graphics device = 2048M
[   11.332584] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[   11.332585] fb: switching to inteldrmfb from EFI VGA
[   11.332722] Console: switching to colour dummy device 80x25
[   11.335949] [drm] Replacing VGA console driver
[   11.337419] iTCO_vendor_support: vendor-support=0
[   11.338145] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   11.338186] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[   11.338322] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.347361] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   11.347363] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   11.347364] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[   11.347365] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   11.347366] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   11.347367] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   11.347368] snd_hda_codec_realtek hdaudioC0D0:      Dock Mic=0x19
[   11.347369] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   11.395205] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   11.395207] [drm] Driver supports precise vblank timestamp query.
[   11.395446] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   11.637418] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.639020] acpi device:03: registered as cooling_device4
[   11.639109] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[   11.639248] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   11.639256] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[   11.644136] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   11.645611] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   11.645680] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   11.645754] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   11.645842] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   11.645918] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   11.645980] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   11.646041] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   11.724112] intel_rapl: Found RAPL domain package
[   11.724116] intel_rapl: Found RAPL domain core
[   11.724118] intel_rapl: Found RAPL domain uncore
[   11.824878] fbcon: inteldrmfb (fb0) is primary device
[   12.583561] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.827694] Console: switching to colour frame buffer device 172x48
[   12.843438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.846747] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   12.854300] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.865024] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.881939] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.166512] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   14.081508] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.093240] Ebtables v2.0 registered
[   17.160134] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.229561] wlan0: authenticate with 00:25:9c:13:d8:6a
[   17.240179] wlan0: send auth to 00:25:9c:13:d8:6a (try 1/3)
[   17.241488] wlan0: authenticated
[   17.243712] wlan0: associate with 00:25:9c:13:d8:6a (try 1/3)
[   17.347695] wlan0: associate with 00:25:9c:13:d8:6a (try 2/3)
[   17.409859] wlan0: RX AssocResp from 00:25:9c:13:d8:6a (capab=0x11 status=0 aid=1)
[   17.410016] wlan0: associated
[   17.410088] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   17.415349] ath: EEPROM regdomain: 0x8348
[   17.415351] ath: EEPROM indicates we should expect a country code
[   17.415352] ath: doing EEPROM country->regdmn map search
[   17.415353] ath: country maps to regdmn code: 0x3a
[   17.415353] ath: Country alpha2 being used: US
[   17.415354] ath: Regpair used: 0x3a
[   17.415355] ath: regdomain 0x8348 dynamically updated by country IE
[   31.545569] Bluetooth: RFCOMM TTY layer initialized
[   31.545577] Bluetooth: RFCOMM socket layer initialized
[   31.545584] Bluetooth: RFCOMM ver 1.11
[   42.537171] fuse init (API version 7.26)
[   52.988006] hidraw: raw HID events driver (C) Jiri Kosina
[   52.989650] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   52.989658] Bluetooth: HIDP socket layer initialized
[   52.993273] magicmouse 0005:05AC:030D.0001: unknown main item tag 0x0
[   52.993453] input: Broken Magic Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/bluetooth/hci0/hci0:11/0005:05AC:030D.0001/input/input19
[   52.993960] magicmouse 0005:05AC:030D.0001: input,hidraw0: BLUETOOTH HID v0.84 Mouse [Broken Magic Mouse] on 7c:e9:d3:b7:fc:24