[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff99fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff9a000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/07/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000180000000 aka 6144M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbff9a max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f0760-0x000f076f] mapped at [ffff8800000f0760]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
[    0.000000]  [mem 0x17fe00000-0x17fffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
[    0.000000]  [mem 0x17c000000-0x17fdfffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
[    0.000000]  [mem 0x100000000-0x17bffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff99fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x7fffffff] page 1G
[    0.000000]  [mem 0x80000000-0xbfdfffff] page 2M
[    0.000000]  [mem 0xbfe00000-0xbff99fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0930 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000BFFB30E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000BFFB58D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000BFFB3280 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
[    0.000000] ACPI: FACS 0x00000000BFFB3240 000040
[    0.000000] ACPI: SSDT 0x00000000BFFB59D0 000EA6 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: TCPA 0x00000000BFFB6880 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 0x00000000BFFB68C0 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB6990 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB6AE0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000BFFB6B10 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000BFFB6B50 000150 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000BFFB6CA0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=2
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[    0.000000]   NODE_DATA [mem 0x13fffb000-0x13fffffff]
[    0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
[    0.000000]   NODE_DATA [mem 0x17fff8000-0x17fffcfff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
[    0.000000]  [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x17fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbff99fff]
[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
[    0.000000]   node   1: [mem 0x140000000-0x17fffffff]
[    0.000000] On node 0 totalpages: 1048376
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10695 pages used for memmap
[    0.000000]   DMA32 zone: 782234 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbff9a000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
[    0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292580
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[    0.000000] Memory: 5012208K/5242080K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 229872K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.802 MHz processor
[    0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.60 BogoMIPS (lpj=7639208)
[    0.010795] pid_max: default: 32768 minimum: 301
[    0.015441] ACPI: Core revision 20140424
[    0.021795] ACPI: All ACPI Tables successfully acquired
[    0.027153] Security Framework initialized
[    0.031279] AppArmor: AppArmor disabled by boot time parameter
[    0.037115] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.044821] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.057959] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.067688] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.074590] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.082438] Initializing cgroup subsys memory
[    0.086812] Initializing cgroup subsys devices
[    0.091275] Initializing cgroup subsys freezer
[    0.095728] Initializing cgroup subsys net_cls
[    0.100185] Initializing cgroup subsys blkio
[    0.104475] Initializing cgroup subsys perf_event
[    0.109190] Initializing cgroup subsys net_prio
[    0.113778] tseg: 0000000000
[    0.113790] CPU: Physical Processor ID: 0
[    0.117809] CPU: Processor Core ID: 0
[    0.121482] mce: CPU supports 6 MCE banks
[    0.125518] LVT offset 0 assigned for vector 0xf9
[    0.130247] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.145595] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[    0.154608] ftrace: allocating 21614 entries in 85 pages
[    0.169934] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.215459] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.332518] Performance Events: AMD PMU driver.
[    0.337088] ... version:                0
[    0.341102] ... bit width:              48
[    0.345199] ... generic registers:      4
[    0.349211] ... value mask:             0000ffffffffffff
[    0.354513] ... max period:             00007fffffffffff
[    0.359831] ... fixed-purpose events:   0
[    0.363860] ... event mask:             000000000000000f
[    0.371735] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.379938] x86: Booting SMP configuration:
[    0.384132] .... node  #0, CPUs:      #1 #2 #3
[    0.428494] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.581128] x86: Booted up 2 nodes, 8 CPUs
[    0.585428] smpboot: Total of 8 processors activated (30557.64 BogoMIPS)
[    0.597927] devtmpfs: initialized
[    0.609231] pinctrl core: initialized pinctrl subsystem
[    0.614628] NET: Registered protocol family 16
[    0.619291] cpuidle: using governor ladder
[    0.623393] cpuidle: using governor menu
[    0.627332] node 0 link 1: io port [1000, 3fff]
[    0.627335] TOM: 00000000c0000000 aka 3072M
[    0.631529] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
[    0.631533] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.631536] node 0 link 1: mmio [f8000000, fbffffff]
[    0.631538] TOM2: 0000000180000000 aka 6144M
[    0.635816] bus: [bus 00-05] on node 0 link 1
[    0.635818] bus: 00 [io  0x0000-0xffff]
[    0.635820] bus: 00 [mem 0xd0000000-0xffffffff]
[    0.635822] bus: 00 [mem 0x180000000-0xfcffffffff]
[    0.635930] ACPI: bus type PCI registered
[    0.639950] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.646549] PCI: Using configuration type 1 for base access
[    0.652120] PCI: Using configuration type 1 for extended access
[    0.669345] ACPI: Added _OSI(Module Device)
[    0.673540] ACPI: Added _OSI(Processor Device)
[    0.677990] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.682704] ACPI: Added _OSI(Processor Aggregator Device)
[    0.691714] ACPI: Interpreter enabled
[    0.695401] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.704666] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.713938] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.723208] ACPI: (supports S0 S1 S5)
[    0.726879] ACPI: Using IOAPIC for interrupt routing
[    0.731889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.760477] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.766670] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.774879] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.814775] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.824778] PCI host bridge to bus 0000:00
[    0.828888] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.834379] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.840565] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.847443] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.854313] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.861184] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.867381] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.867591] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.867598] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.867732] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.867740] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.867759] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.867763] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.867784] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.867883] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.867891] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.867931] pci 0000:00:02.0: supports D1 D2
[    0.867933] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.867980] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.873709] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.873724] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.873766] pci 0000:00:02.1: supports D1 D2
[    0.873768] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.873818] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.879551] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.879580] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.879591] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.886725] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.893256] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.900387] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.907028] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.907036] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.907041] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.907046] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.907050] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.907055] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.907060] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.907194] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.907208] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.907213] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.907217] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.907222] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.907227] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.907231] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.907358] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.907450] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.913173] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.913225] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.913271] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.918993] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.919048] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.919094] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.924822] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.924862] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.924918] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.930637] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.930697] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930766] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.936504] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.936638] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.936760] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.936881] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.937025] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.937155] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.937304] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.937427] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.937539] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.937655] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.937843] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.937868] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.937888] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.937898] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.937940] pci 0000:01:04.0: supports D1 D2
[    0.938032] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.943015] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.943018] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.943021] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.943117] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.943180] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.943215] pci 0000:02:00.0: reg 0x30: [mem 0x69630000-0x6963ffff pref]
[    0.943294] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.943369] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.953372] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.958340] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.958437] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.958478] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.958584] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.958690] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.968688] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.973657] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.973732] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.978783] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.983766] pci_bus 0000:00: on NUMA node 0
[    0.983864] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    0.990007] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    0.996154] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.003447] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.010748] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.018051] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.025350] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.031471] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.037609] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.044903] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.052196] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.059483] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.065614] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.071747] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.079058] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.086360] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.093660] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.102182] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.108642] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.115100] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.121578] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.128285] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.133405] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.139071] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.147167] vgaarb: loaded
[    1.149878] vgaarb: bridge control possible 0000:01:04.0
[    1.155360] PCI: Using ACPI for IRQ routing
[    1.159555] PCI: pci_cache_line_size set to 64 bytes
[    1.159612] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.159616] e820: reserve RAM buffer [mem 0xbff9a000-0xbfffffff]
[    1.159924] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.166980] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.172051] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.180733] Switched to clocksource hpet
[    1.196264] pnp: PnP ACPI init
[    1.199376] ACPI: bus type PNP registered
[    1.203900] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.203986] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.204067] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.204164] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.204201] pnp 00:04: [dma 2]
[    1.204248] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.204269] pnp: PnP ACPI: found 5 devices
[    1.208377] ACPI: bus type PNP unregistered
[    1.220406] pci 0000:02:00.0: can't claim BAR 6 [mem 0x69630000-0x6963ffff pref]: no compatible bridge window
[    1.230360] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.235337] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.241435] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.248228] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.255464] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.262689] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.267662] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.274456] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.279428] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.286222] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.291195] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.296169] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.296172] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[    1.296174] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
[    1.296177] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
[    1.296179] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
[    1.296182] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.296185] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.296188] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.296191] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.296193] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.296334] NET: Registered protocol family 2
[    1.301238] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.308933] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.316268] TCP: Hash tables configured (established 65536 bind 65536)
[    1.322872] TCP: reno registered
[    1.326136] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.332349] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.339135] NET: Registered protocol family 1
[    1.343881] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.349964] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.355871] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.361402] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.366914] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.372497] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.378042] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.383554] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.389144] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.394695] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.400205] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.405797] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.411341] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.416856] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.422448] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.427979] pci 0000:01:04.0: Video device with shadowed ROM
[    1.427989] PCI: CLS 64 bytes, default 64
[    1.428097] Unpacking initramfs...
[    1.811508] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
[    1.819467] PCI-DMA: Disabling AGP.
[    1.824571] PCI-DMA: aperture base @ b4000000 size 65536 KB
[    1.830149] PCI-DMA: using GART IOMMU.
[    1.833911] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.846231] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.854404] microcode: CPU0: patch_level=0x01000084
[    1.859296] microcode: CPU1: patch_level=0x01000084
[    1.864193] microcode: CPU2: patch_level=0x01000084
[    1.869094] microcode: CPU3: patch_level=0x01000084
[    1.874000] microcode: CPU4: patch_level=0x01000084
[    1.878896] microcode: CPU5: patch_level=0x01000084
[    1.883790] microcode: CPU6: patch_level=0x01000084
[    1.888688] microcode: CPU7: patch_level=0x01000084
[    1.893681] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.902483] LVT offset 1 assigned for vector 0x400
[    1.907296] IBS: LVT offset 1 assigned
[    1.911089] perf: AMD IBS detected (0x00000007)
[    1.916232] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.922619] audit: initializing netlink subsys (disabled)
[    1.928042] audit: type=2000 audit(1460063324.656:1): initialized
[    1.934912] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.941315] zbud: loaded
[    1.944217] VFS: Disk quotas dquot_6.5.2
[    1.948190] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.954733] msgmni has been set to 9945
[    1.959118] alg: No test for stdrng (krng)
[    1.963275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.970780] io scheduler noop registered
[    1.974716] io scheduler deadline registered
[    1.979070] io scheduler cfq registered (default)
[    1.983994] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.984124] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.984267] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.984397] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.984570] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.984598] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.984626] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.984646] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.984669] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.991634] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.998163] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.998173] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    2.005136] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.011671] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    2.011680] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    2.018644] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    2.018653] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    2.025617] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    2.025649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.031260] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.037970] GHES: HEST is not enabled!
[    2.041867] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.068476] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.096148] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.104062] Linux agpgart interface v0.103
[    2.108375] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.118927] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.123978] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.129278] mousedev: PS/2 mouse device common for all mice
[    2.134952] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.140090] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.146490] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.154347] ledtrig-cpu: registered to indicate activity on CPUs
[    2.160542] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.166985] AMD IOMMUv2 functionality not available on this system
[    2.173312] TCP: cubic registered
[    2.176790] NET: Registered protocol family 10
[    2.181692] mip6: Mobile IPv6
[    2.184687] NET: Registered protocol family 17
[    2.185139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.197752] mpls_gso: MPLS GSO support
[    2.202364] registered taskstats version 1
[    2.207253] rtc_cmos rtc_cmos: setting system clock to 2016-04-07 21:08:46 UTC (1460063326)
[    2.215673] PM: Hibernation image not present or could not be loaded.
[    2.217500] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
[    2.225336] Write protecting the kernel read-only data: 8192k
[    2.234561] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
[    2.243138] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.277709] systemd-udevd[98]: starting version 215
[    2.283461] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.314457] ACPI: bus type USB registered
[    2.318687] usbcore: registered new interface driver usbfs
[    2.318726] SCSI subsystem initialized
[    2.328018] usbcore: registered new interface driver hub
[    2.328533] FDC 0 is a post-1991 82077
[    2.337761] pps_core: LinuxPPS API ver. 1 registered
[    2.337944] usbcore: registered new device driver usb
[    2.347818] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.358356] PTP clock support registered
[    2.358668] libata version 3.00 loaded.
[    2.362748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.369833] sata_nv 0000:00:07.0: version 3.5
[    2.370109] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[    2.376364] ehci-pci: EHCI PCI platform driver
[    2.376561] tg3.c:v3.137 (May 11, 2014)
[    2.376577] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.376775] scsi0 : sata_nv
[    2.376783] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.399141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.399248] scsi1 : sata_nv
[    2.399334] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[    2.399338] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[    2.399536] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[    2.400003] scsi2 : sata_nv
[    2.400167] scsi3 : sata_nv
[    2.400233] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[    2.400235] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[    2.400373] pata_amd 0000:00:06.0: version 0.4.1
[    2.400996] scsi4 : pata_amd
[    2.401169] scsi5 : pata_amd
[    2.401231] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[    2.401233] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[    2.401508] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.401525] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.401541] ehci-pci 0000:00:02.1: debug port 1
[    2.401586] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.401616] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.412327] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.412406] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.412408] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.412409] usb usb1: Product: EHCI Host Controller
[    2.412411] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.412412] usb usb1: SerialNumber: 0000:00:02.1
[    2.412754] hub 1-0:1.0: USB hub found
[    2.412765] hub 1-0:1.0: 10 ports detected
[    2.534465] ohci-pci: OHCI PCI platform driver
[    2.539234] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.544840] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.552298] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.583460] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.593735] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.603485] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.611317] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.614341] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.614343] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.614345] usb usb2: Product: OHCI PCI host controller
[    2.614346] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.614347] usb usb2: SerialNumber: 0000:00:02.0
[    2.614595] hub 2-0:1.0: USB hub found
[    2.614606] hub 2-0:1.0: 10 ports detected
[    2.656068] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.661880] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.708228] ata1: SATA link down (SStatus 0 SControl 300)
[    2.708235] ata3: SATA link down (SStatus 0 SControl 300)
[    2.712756] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.712758] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.712760] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.712761] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.844177] tsc: Refined TSC clocksource calibration: 1909.786 MHz
[    3.064095] ata2: SATA link down (SStatus 0 SControl 300)
[    3.379992] ata4: SATA link down (SStatus 0 SControl 300)
[    3.569943] FS-Cache: Loaded
[    3.577906] RPC: Registered named UNIX socket transport module.
[    3.584915] RPC: Registered udp transport module.
[    3.590980] RPC: Registered tcp transport module.
[    3.597072] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.610689] FS-Cache: Netfs 'nfs' registered for caching
[    3.628545] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    3.676014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.847943] Switched to clocksource tsc
[    5.302266] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    5.308797] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    5.315685] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.156997] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    6.171046] systemd[1]: Detected architecture 'x86-64'.
[    6.396595] systemd[1]: Inserted module 'autofs4'
[    6.402748] systemd[1]: Set hostname to <cb-test-tgt>.
[    6.481004] random: nonblocking pool is initialized
[    6.642518] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    6.655247] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    6.670633] systemd[1]: Expecting device dev-ttyS0.device...
[    6.687002] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    6.694788] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    6.702397] systemd[1]: Starting Remote File Systems (Pre).
[    6.718895] systemd[1]: Reached target Remote File Systems (Pre).
[    6.725018] systemd[1]: Starting Encrypted Volumes.
[    6.738871] systemd[1]: Reached target Encrypted Volumes.
[    6.744331] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    6.766858] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    6.776284] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    6.784346] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    6.792275] systemd[1]: Starting Paths.
[    6.806846] systemd[1]: Reached target Paths.
[    6.811248] systemd[1]: Starting Swap.
[    6.822844] systemd[1]: Reached target Swap.
[    6.827139] systemd[1]: Starting Root Slice.
[    6.838837] systemd[1]: Created slice Root Slice.
[    6.843562] systemd[1]: Starting User and Session Slice.
[    6.858830] systemd[1]: Created slice User and Session Slice.
[    6.864594] systemd[1]: Starting Delayed Shutdown Socket.
[    6.878833] systemd[1]: Listening on Delayed Shutdown Socket.
[    6.884608] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    6.902816] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    6.909797] systemd[1]: Starting Journal Socket (/dev/log).
[    6.926798] systemd[1]: Listening on Journal Socket (/dev/log).
[    6.932754] systemd[1]: Starting udev Kernel Socket.
[    6.946801] systemd[1]: Listening on udev Kernel Socket.
[    6.952141] systemd[1]: Starting udev Control Socket.
[    6.966793] systemd[1]: Listening on udev Control Socket.
[    6.972225] systemd[1]: Starting Journal Socket.
[    6.986777] systemd[1]: Listening on Journal Socket.
[    6.991780] systemd[1]: Starting System Slice.
[    7.006774] systemd[1]: Created slice System Slice.
[    7.011692] systemd[1]: Starting system-getty.slice.
[    7.026771] systemd[1]: Created slice system-getty.slice.
[    7.032194] systemd[1]: Starting system-serial\x2dgetty.slice.
[    7.046851] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.053225] systemd[1]: Starting Increase datagram queue length...
[    7.072136] systemd[1]: Starting udev Coldplug all Devices...
[    7.118630] systemd[1]: Starting Load Kernel Modules...
[    7.326132] systemd[1]: Started Set Up Additional Binary Formats.
[    7.332483] systemd[1]: Mounting Debug File System...
[    7.348381] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.372545] systemd[1]: Mounting POSIX Message Queue File System...
[    7.392082] systemd[1]: Mounting Huge Pages File System...
[    7.408265] systemd[1]: Starting Slices.
[    7.422696] systemd[1]: Reached target Slices.
[    7.427226] systemd[1]: Starting Remount Root and Kernel File Systems...
[    7.454672] systemd[1]: Mounted Huge Pages File System.
[    7.470614] systemd[1]: Mounted POSIX Message Queue File System.
[    7.486598] systemd[1]: Mounted Debug File System.
[    7.502603] systemd[1]: Started Increase datagram queue length.
[    7.518663] systemd[1]: Started Load Kernel Modules.
[    7.538681] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.562647] systemd[1]: Started Remount Root and Kernel File Systems.
[    7.578623] systemd[1]: Started udev Coldplug all Devices.
[    7.624314] systemd[1]: Started Various fixups to make systemd work better on Debian.
[    7.632214] systemd[1]: Starting Load/Save Random Seed...
[    7.648088] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.668024] systemd[1]: Starting Apply Kernel Variables...
[    7.684412] systemd[1]: Mounted Configuration File System.
[    7.690259] systemd[1]: Mounted FUSE Control File System.
[    7.695869] systemd[1]: Starting Syslog Socket.
[    7.710628] systemd[1]: Listening on Syslog Socket.
[    7.715641] systemd[1]: Starting Sockets.
[    7.730585] systemd[1]: Reached target Sockets.
[    7.735209] systemd[1]: Starting Journal Service...
[    7.762579] systemd[1]: Started Journal Service.
[    7.898913] systemd-udevd[209]: starting version 215
[    8.167152] systemd-journald[207]: Received request to flush runtime journal from PID 1
[    8.642403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.649506] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[    8.657333] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[    8.676837] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    8.685215] ACPI: Power Button [PWRB]
[    8.689059] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.696505] ACPI: Power Button [PWRF]
[    8.702256] EDAC MC: Ver: 3.0.0
[    8.708388] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.715412] acpi-cpufreq: overriding BIOS provided _PSD data
[    8.721659] MCE: In-kernel MCE decoding enabled.
[    8.727216] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[    8.732516] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[    8.806468] AMD64 EDAC driver v3.4.0
[    8.811153] EDAC amd64: DRAM ECC enabled.
[    8.815281] EDAC amd64: F10h detected (node 0).
[    8.820052] EDAC MC: DCT0 chip selects:
[    8.820055] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.824882] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.829607] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.834365] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.839082] EDAC MC: DCT1 chip selects:
[    8.839084] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.843850] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.848572] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.853318] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[    8.858036] EDAC amd64: using x4 syndromes.
[    8.862258] EDAC amd64: MCT channel count: 2
[    8.866629] EDAC amd64: CS6: Registered DDR2 RAM
[    8.871339] EDAC amd64: CS7: Registered DDR2 RAM
[    8.876639] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[    8.876748] kvm: Nested Virtualization enabled
[    8.876755] kvm: Nested Paging enabled
[    8.894603] EDAC amd64: DRAM ECC enabled.
[    8.898733] EDAC amd64: F10h detected (node 1).
[    8.903348] EDAC MC: DCT0 chip selects:
[    8.903352] EDAC amd64: MC: 0:  1024MB 1:     0MB
[    8.908090] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.914179] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.920304] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.925961] EDAC MC: DCT1 chip selects:
[    8.925964] EDAC amd64: MC: 0:     0MB 1:     0MB
[    8.930676] EDAC amd64: MC: 2:     0MB 3:     0MB
[    8.935387] EDAC amd64: MC: 4:     0MB 5:     0MB
[    8.940100] EDAC amd64: MC: 6:     0MB 7:     0MB
[    8.944814] EDAC amd64: using x4 syndromes.
[    8.949010] EDAC amd64: MCT channel count: 1
[    8.953334] EDAC amd64: CS0: Registered DDR2 RAM
[    8.958259] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[    8.968105] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   39.723491] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****