

coreboot-4.0-9447-gbd74a4b-dirty Wed Apr 22 15:55:08 UTC 2015 romstage starting...
BSP Family_Model: 00100f21
*sysinfo range: [000c4000,000c6899]
bsp_apicid = 00
cpu_init_detectedx = 00000000
CBFS: CBFS header offset: 0xfffff468/0x100000
CBFS: CBFS location: 0x0~0xff480, align: 64
CBFS: Looking for 'cpu_microcode_blob.bin' starting from 0x0.
CBFS:  - load entry 0x0 file name (16 bytes)...
CBFS:  (unmatched file @0x0: cmos_layout.bin)
CBFS:  - load entry 0xac0 file name (16 bytes)...
CBFS:  (unmatched file @0xac0: cmos.default)
CBFS:  - load entry 0xc00 file name (72 bytes)...
CBFS: Found file (offset=0xc60, len=14336).
[microcode] patch id to apply = 0x01000096
[microcode] updated to patch id = 0x01000096 success
POST: 0x33
cpuSetAMDMSR  done
POST: 0x34
Enter amd_ht_init()
AMD_CB_EventNotify()
 event class: 05
 event: 1004
 data:  04  00  00  01 
AMD_CB_EventNotify()
 event class: 05
 event: 2006
 data:  04  00  01  00 
CBFS: CBFS header offset: 0xfffff468/0x100000
CBFS: CBFS location: 0x0~0xff480, align: 64
CBFS: Looking for 'cmos_layout.bin' starting from 0x0.
CBFS:  - load entry 0x0 file name (16 bytes)...
CBFS: Found file (offset=0x28, len=2704).
Exit amd_ht_init()
POST: 0x35
cpuSetAMDPCI 00 done
cpuSetAMDPCI 01 done
Prep FID/VID Node:00 
  F3x80: e600a681 
  F3x84: a0e641e6 
  F3xD4: c3310f24 
  F3xD8: 03001c14 
  F3xDC: 00005428 
Prep FID/VID Node:01 
  F3x80: e600a681 
  F3x84: a0e641e6 
  F3xD4: c3310f24 
  F3xD8: 03001c14 
  F3xDC: 00005428 
setup_remote_node: 01 done
Start node 01 done.
POST: 0x36
core0 started:  01

Begin FIDVID MSR 0xc0010071 0x20a600e4 0x38005044
POST: 0x39
POST: 0x3a
End FIDVIDMSR 0xc0010071 0x20a600e4 0x38003803
start_other_cores()
init node: 00  cores: 03 
Start other core - nodeid: 00  cores: 03
init node: 01  cores: 03 
Start other core - nodeid: 01  cores: 03
POST: 0x37
started ap apicid: * AP 01started
* AP 02started
* AP 03started
* AP 05started
* AP 06started
* AP 07started

set_ck804_base_unit_id()
POST: 0x38
POST: 0x3b
fill_mem_ctrl()
POST: 0x3d
enable_smbus()
SMBus controller enabled
POST: 0x40
raminit_amdmct()
raminit_amdmct begin:
mctAutoInitMCT_D: mct_init Node 00000000
mctAutoInitMCT_D: clear_legacy_Mode
mctAutoInitMCT_D: mct_InitialMCT_D
	mct_InitialMCT_D: Set Cl, Wb
mctAutoInitMCT_D: mctSMBhub_Init
activate_spd_rom() for node 00
enable_spd_node0()
mctAutoInitMCT_D: mct_initDCT
	mct_initDCT: DCTInit_D 0
	 DIMMPresence: i=00000000
	 DIMMPresence: smbaddr=00000050
	 DIMMPresence: i=00000001
	 DIMMPresence: smbaddr=00000051
	 DIMMPresence: i=00000002
	 DIMMPresence: smbaddr=00000052
	 DIMMPresence: i=00000003
	 DIMMPresence: smbaddr=00000053
	 DIMMPresence: i=00000004
	 DIMMPresence: smbaddr=00000054
	 DIMMPresence: i=00000005
	 DIMMPresence: smbaddr=00000055
	 DIMMPresence: i=00000006
	 DIMMPresence: smbaddr=00000056
	 DIMMPresence: i=00000007
	 DIMMPresence: smbaddr=00000057
	 DIMMPresence: DIMMValid=000000c0
	 DIMMPresence: DIMMPresent=000000c0
	 DIMMPresence: RegDIMMPresent=000000c

*** Log truncated, 15802 characters dropped. ***

POST: 0x41
amdmct_cbmem_store_info: Storing AMDMCT configuration in CBMEM
CBFS: CBFS header offset: 0xfffff468/0x100000
CBFS: CBFS location: 0x0~0xff480, align: 64
CBFS: Looking for 'cmos_layout.bin' starting from 0x0.
CBFS:  - load entry 0x0 file name (16 bytes)...
CBFS: Found file (offset=0x28, len=2704).
disable_spd()
enable_msi_mapping()
Prepare CAR migration and stack regions... Fill [003fd000-003fffff] ... Done
Copying data from cache to RAM...  Copy [000c4000-000c697f] to [003fd680 - 003fffff] ... Done
Switching to use RAM as stack... Top about 003fd66c ... Done
Disabling cache as ram now
Prepare ramstage memory region...  Fill [00000000-003fcfff] ... Moving GDT to dffd7000...ok
POST: 0x80
CBFS: CBFS header offset: 0xfffff468/0x100000
CBFS: CBFS location: 0x0~0xff480, align: 64
CBFS: Looking for 'cmos_layout.bin' starting from 0x0.
CBFS:  - load entry 0x0 file name (16 bytes)...
CBFS: Found file (offset=0x28, len=2704).
SeaBIOS (version rel-1.8.0-10-g5ae3dd6-20150422_171910-cb-test-tgt)
Found coreboot cbmem console @ dffdc000
Found mainboard ASUS KFSN4-DRE
Relocating init from 0x000e7c30 to 0xdff5ec60 (size 41696)
Found CBFS header at 0xfffff468
CPU Mhz=1910
Found 26 PCI devices (max PCI bus is 05)
Copying SMBIOS entry point from 0xdffb1000 to 0x000f1ef0
Copying ACPI RSDP from 0xdffb2000 to 0x000f1ec0
Copying MPTABLE from 0xdffd6000/dffd6010 to 0x000f1cf0
Using pmtimer, ioport 0x2008
Scan for VGA option rom
Running option rom at c000:0003
pmm call arg1=0
Turning on vga text mode console
SeaBIOS (version rel-1.8.0-10-g5ae3dd6-20150422_171910-cb-test-tgt)
EHCI init on dev 00:02.1 (regs=0xfc303020)
OHCI init on dev 00:02.0 (regs=0xfc300000)
Found 0 lpt ports
Found 2 serial ports
ATA controller 1 at 1f0/3f4/0 (irq 14 dev 30)
ATA controller 2 at 170/374/0 (irq 15 dev 30)
ATA controller 3 at 3050/3070/0 (irq 0 dev 38)
ATA controller 4 at 3058/3074/0 (irq 0 dev 38)
ATA controller 5 at 3060/3078/0 (irq 0 dev 40)
ATA controller 6 at 3068/307c/0 (irq 0 dev 40)
PS2 keyboard initialized
All threads complete.
Scan for option roms
Running option rom at c700:0003
pmm call arg1=1
pmm call arg1=0
pmm call arg1=1
pmm call arg1=0
Running option rom at c800:0003
pmm call arg1=1
pmm call arg1=1
Searching bootorder for: /pci@i0cf8/pci-bridge@b/*@0
Searching bootorder for: /pci@i0cf8/pci-bridge@c/*@0

Press F12 for boot menu.

Unable to find vesa video mode dimensions 640/480
failed to find a videomode with 640x480 0bpp (0=any).
Searching bootorder for: HALT
Space available for UMB: c9000-ed000, f0000-f1c90
Returned 262144 bytes of ZoneHigh
e820 map has 6 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 00000000dffa9000 = 1 RAM
  4: 00000000dffa9000 - 00000000f0000000 = 2 RESERVED
  5: 0000000100000000 - 0000000160000000 = 1 RAM
enter handle_19:
  NULL
Booting from ROM...
Booting from c700:0373