Revert "lenovo/t400/4.5-1564-g6fa36c9c2c-dirty/2017-04-16T13_28_27Z"

This reverts commit e5454d36ca2f96e452a228db9a1485bff2e8f32e.

The commit in question deletes a lot of unrelated files, and needs to be
reverted.
diff --git a/asus/kfsn4-dre_k8/4.3-642-g2b6db97/2016-04-07T18_46_38Z/kernel_log.txt b/asus/kfsn4-dre_k8/4.3-642-g2b6db97/2016-04-07T18_46_38Z/kernel_log.txt
new file mode 100644
index 0000000..dee4361
--- /dev/null
+++ b/asus/kfsn4-dre_k8/4.3-642-g2b6db97/2016-04-07T18_46_38Z/kernel_log.txt
@@ -0,0 +1,772 @@
+[    0.000000] Initializing cgroup subsys cpuset
+[    0.000000] Initializing cgroup subsys cpu
+[    0.000000] Initializing cgroup subsys cpuacct
+[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)
+[    0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
+[    0.000000] e820: BIOS-provided physical RAM map:
+[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
+[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
+[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
+[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9efff] usable
+[    0.000000] BIOS-e820: [mem 0x00000000bff9f000-0x00000000bfffffff] reserved
+[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
+[    0.000000] NX (Execute Disable) protection: active
+[    0.000000] SMBIOS 2.7 present.
+[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS RAPTOR-NORMAL 04/07/2016
+[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
+[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
+[    0.000000] AGP: No AGP bridge found
+[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
+[    0.000000] MTRR default type: uncachable
+[    0.000000] MTRR fixed ranges enabled:
+[    0.000000]   00000-9FFFF write-back
+[    0.000000]   A0000-BFFFF uncachable
+[    0.000000]   C0000-FFFFF write-back
+[    0.000000] MTRR variable ranges enabled:
+[    0.000000]   0 base 0000000000 mask FF80000000 write-back
+[    0.000000]   1 base 0080000000 mask FFC0000000 write-back
+[    0.000000]   2 base 00F8000000 mask FFFC000000 write-combining
+[    0.000000]   3 disabled
+[    0.000000]   4 disabled
+[    0.000000]   5 disabled
+[    0.000000]   6 disabled
+[    0.000000]   7 disabled
+[    0.000000] TOM2: 0000000140000000 aka 5120M
+[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+[    0.000000] e820: last_pfn = 0xbff9f max_arch_pfn = 0x400000000
+[    0.000000] found SMP MP-table at [mem 0x000f0790-0x000f079f] mapped at [ffff8800000f0790]
+[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
+[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
+[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
+[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
+[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
+[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
+[    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
+[    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
+[    0.000000] BRK [0x01af7000, 0x01af7fff] PGTABLE
+[    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
+[    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
+[    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
+[    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
+[    0.000000] init_memory_mapping: [mem 0x00100000-0xbff9efff]
+[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
+[    0.000000]  [mem 0x00200000-0xbfdfffff] page 2M
+[    0.000000]  [mem 0xbfe00000-0xbff9efff] page 4k
+[    0.000000] RAMDISK: [mem 0x7f24c000-0x7fffefff]
+[    0.000000] ACPI: Early table checksum verification disabled
+[    0.000000] ACPI: RSDP 0x00000000000F0930 000024 (v02 CORE  )
+[    0.000000] ACPI: XSDT 0x00000000BFFB80E0 00006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: FACP 0x00000000BFFBA8D0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: DSDT 0x00000000BFFB8280 002648 (v02 ASUS   COREBOOT 00000001 INTL 20150619)
+[    0.000000] ACPI: FACS 0x00000000BFFB8240 000040
+[    0.000000] ACPI: SSDT 0x00000000BFFBA9D0 0006BD (v02 CORE   COREBOOT 0000002A CORE 0000002A)
+[    0.000000] ACPI: TCPA 0x00000000BFFBB090 000032 (v02 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: APIC 0x00000000BFFBB0D0 00008E (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: SRAT 0x00000000BFFBB160 0000E8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: SLIT 0x00000000BFFBB250 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: HPET 0x00000000BFFBB280 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: SRAT 0x00000000BFFBB2C0 0000E8 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: SLIT 0x00000000BFFBB3B0 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
+[    0.000000] ACPI: Local APIC address 0xfee00000
+[    0.000000] SRAT: PXM 0 -> APIC 0x10 -> Node 0
+[    0.000000] SRAT: PXM 0 -> APIC 0x11 -> Node 0
+[    0.000000] SRAT: PXM 1 -> APIC 0x12 -> Node 1
+[    0.000000] SRAT: PXM 1 -> APIC 0x13 -> Node 1
+[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
+[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
+[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
+[    0.000000] NUMA: Initialized distance table, cnt=2
+[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xbfffffff] -> [mem 0x00000000-0xbfffffff]
+[    0.000000] NUMA: Node 0 [mem 0x00000000-0xbfffffff] + [mem 0x100000000-0x13fffffff] -> [mem 0x00000000-0x13fffffff]
+[    0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
+[    0.000000]   NODE_DATA [mem 0x13fff7000-0x13fffbfff]
+[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
+[    0.000000] Zone ranges:
+[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
+[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
+[    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
+[    0.000000] Movable zone start for each node
+[    0.000000] Early memory node ranges
+[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
+[    0.000000]   node   0: [mem 0x00100000-0xbff9efff]
+[    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
+[    0.000000] On node 0 totalpages: 1048381
+[    0.000000]   DMA zone: 56 pages used for memmap
+[    0.000000]   DMA zone: 21 pages reserved
+[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
+[    0.000000]   DMA32 zone: 10695 pages used for memmap
+[    0.000000]   DMA32 zone: 782239 pages, LIFO batch:31
+[    0.000000]   Normal zone: 3584 pages used for memmap
+[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
+[    0.000000] Detected use of extended apic ids on hypertransport bus
+[    0.000000] Detected use of extended apic ids on hypertransport bus
+[    0.000000] ACPI: PM-Timer IO Port: 0x4008
+[    0.000000] ACPI: Local APIC address 0xfee00000
+[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
+[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
+[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
+[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
+[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+[    0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
+[    0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
+[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
+[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
+[    0.000000] ACPI: IRQ9 used by override.
+[    0.000000] ACPI: IRQ14 used by override.
+[    0.000000] ACPI: IRQ15 used by override.
+[    0.000000] Using ACPI (MADT) for SMP configuration information
+[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
+[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
+[    0.000000] nr_irqs_gsi: 40
+[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
+[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
+[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
+[    0.000000] PM: Registered nosave memory: [mem 0xbff9f000-0xbfffffff]
+[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
+[    0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
+[    0.000000] Booting paravirtualized kernel on bare hardware
+[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
+[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
+[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
+[    0.000000] pcpu-alloc: [0] 0 1 2 3 
+[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1034025
+[    0.000000] Policy zone: Normal
+[    0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt-x86_64 rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-03,v3,hard,nointr,tcp ip=10.100.1.12::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt-x86_64 
+[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
+[    0.000000] AGP: Checking aperture...
+[    0.000000] AGP: No AGP bridge found
+[    0.000000] AGP: Node 0: aperture [bus addr 0xe380000000-0xe381ffffff] (32MB)
+[    0.000000] Aperture beyond 4GB. Ignoring.
+[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
+[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
+[    0.000000] AGP: This costs you 64MB of RAM
+[    0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
+[    0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
+[    0.000000] Memory: 3978532K/4193524K available (5207K kernel code, 946K rwdata, 1832K rodata, 1204K init, 840K bss, 214992K reserved)
+[    0.000000] Hierarchical RCU implementation.
+[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
+[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
+[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
+[    0.000000] NR_IRQS:33024 nr_irqs:712 16
+[    0.000000] spurious 8259A interrupt: IRQ7.
+[    0.000000] Console: colour VGA+ 80x25
+[    0.000000] console [ttyS0] enabled
+[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
+[    0.000000] hpet clockevent registered
+[    0.000000] tsc: Fast TSC calibration using PIT
+[    0.000000] tsc: Detected 3015.631 MHz processor
+[    0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
+[    0.016000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6031.26 BogoMIPS (lpj=12062524)
+[    0.018886] pid_max: default: 32768 minimum: 301
+[    0.020012] ACPI: Core revision 20140424
+[    0.025663] ACPI: All ACPI Tables successfully acquired
+[    0.028234] Security Framework initialized
+[    0.032013] AppArmor: AppArmor disabled by boot time parameter
+[    0.036001] Yama: disabled by default; enable with sysctl kernel.yama.*
+[    0.044273] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[    0.054006] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+[    0.057126] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
+[    0.060012] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
+[    0.064356] Initializing cgroup subsys memory
+[    0.068010] Initializing cgroup subsys devices
+[    0.072010] Initializing cgroup subsys freezer
+[    0.076004] Initializing cgroup subsys net_cls
+[    0.080007] Initializing cgroup subsys blkio
+[    0.084006] Initializing cgroup subsys perf_event
+[    0.088003] Initializing cgroup subsys net_prio
+[    0.092029] tseg: 0000000000
+[    0.092036] CPU: Physical Processor ID: 0
+[    0.096001] CPU: Processor Core ID: 0
+[    0.100002] mce: CPU supports 5 MCE banks
+[    0.104008] LVT offset 0 assigned for vector 0xf9
+[    0.108004] process: using AMD E400 aware idle routine
+[    0.112003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
+Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
+tlb_flushall_shift: 6
+[    0.120085] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
+[    0.128701] ftrace: allocating 21614 entries in 85 pages
+[    0.140432] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
+[    0.186589] smpboot: CPU0: Dual-Core AMD Opteron(tm) Processor 8222 (fam: 0f, model: 41, stepping: 03)
+[    0.196000] Performance Events: AMD PMU driver.
+[    0.196002] ... version:                0
+[    0.200000] ... bit width:              48
+[    0.204000] ... generic registers:      4
+[    0.208000] ... value mask:             0000ffffffffffff
+[    0.212000] ... max period:             00007fffffffffff
+[    0.216000] ... fixed-purpose events:   0
+[    0.220000] ... event mask:             000000000000000f
+[    0.225512] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
+[    0.228156] x86: Booting SMP configuration:
+[    0.232002] .... node  #0, CPUs:      #1 #2 #3
+[    0.504068] x86: Booted up 1 node, 4 CPUs
+[    0.508002] smpboot: Total of 4 processors activated (24123.79 BogoMIPS)
+[    0.516104] devtmpfs: initialized
+[    0.525253] pinctrl core: initialized pinctrl subsystem
+[    0.528096] NET: Registered protocol family 16
+[    0.532142] cpuidle: using governor ladder
+[    0.536002] cpuidle: using governor menu
+[    0.540006] node 0 link 1: io port [1000, 5fff]
+[    0.540008] TOM: 00000000c0000000 aka 3072M
+[    0.544002] node 0 link 1: mmio [a0000, bffff]
+[    0.544004] node 0 link 1: mmio [fc000000, fc5fffff]
+[    0.544006] node 0 link 1: mmio [f8000000, fbffffff]
+[    0.544007] TOM2: 0000000140000000 aka 5120M
+[    0.548002] bus: [bus 00-08] on node 0 link 1
+[    0.548003] bus: 00 [io  0x0000-0xffff]
+[    0.548004] bus: 00 [mem 0x000a0000-0x000bffff]
+[    0.548006] bus: 00 [mem 0xc0000000-0xffffffff]
+[    0.548007] bus: 00 [mem 0x140000000-0xfcffffffff]
+[    0.548061] ACPI: bus type PCI registered
+[    0.552002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+[    0.556095] PCI: Using configuration type 1 for base access
+[    0.576087] ACPI: Added _OSI(Module Device)
+[    0.580002] ACPI: Added _OSI(Processor Device)
+[    0.584001] ACPI: Added _OSI(3.0 _SCP Extensions)
+[    0.588001] ACPI: Added _OSI(Processor Aggregator Device)
+[    0.597119] ACPI: Interpreter enabled
+[    0.600009] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
+[    0.608001] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
+[    0.618188] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
+[    0.628004] ACPI: (supports S0 S1 S5)
+[    0.632001] ACPI: Using IOAPIC for interrupt routing
+[    0.636029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[    0.645596] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-08])
+[    0.648006] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
+[    0.652011] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
+[    0.657646] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
+[    0.660005] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
+[    0.664115] PCI host bridge to bus 0000:00
+[    0.668002] pci_bus 0000:00: root bus resource [bus 00-08]
+[    0.672002] pci_bus 0000:00: root bus resource [io  0x0d00-0x5fff]
+[    0.676002] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
+[    0.680002] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc5fffff]
+[    0.684001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
+[    0.688001] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
+[    0.692010] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
+[    0.692124] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
+[    0.692129] pci 0000:00:01.0: reg 0x10: [io  0x4c00-0x4c7f]
+[    0.692202] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
+[    0.692208] pci 0000:00:01.1: reg 0x10: [io  0x5000-0x501f]
+[    0.692217] pci 0000:00:01.1: reg 0x20: [io  0x4c80-0x4cbf]
+[    0.692221] pci 0000:00:01.1: reg 0x24: [io  0x4cc0-0x4cff]
+[    0.692232] pci 0000:00:01.1: PME# supported from D3hot D3cold
+[    0.692298] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
+[    0.692304] pci 0000:00:02.0: reg 0x10: [mem 0xfc500000-0xfc500fff]
+[    0.692324] pci 0000:00:02.0: supports D1 D2
+[    0.692325] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.692355] pci 0000:00:02.0: System wakeup disabled by ACPI
+[    0.696041] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
+[    0.696048] pci 0000:00:02.1: reg 0x10: [mem 0xfc503000-0xfc5030ff]
+[    0.696073] pci 0000:00:02.1: supports D1 D2
+[    0.696074] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.700022] pci 0000:00:02.1: System wakeup disabled by ACPI
+[    0.704049] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
+[    0.704062] pci 0000:00:06.0: reg 0x20: [io  0x5020-0x502f]
+[    0.704068] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
+[    0.708002] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
+[    0.712001] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
+[    0.716001] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
+[    0.720064] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
+[    0.720069] pci 0000:00:07.0: reg 0x10: [io  0x5050-0x5057]
+[    0.720073] pci 0000:00:07.0: reg 0x14: [io  0x5070-0x5073]
+[    0.720077] pci 0000:00:07.0: reg 0x18: [io  0x5058-0x505f]
+[    0.720080] pci 0000:00:07.0: reg 0x1c: [io  0x5074-0x5077]
+[    0.720084] pci 0000:00:07.0: reg 0x20: [io  0x5030-0x503f]
+[    0.720087] pci 0000:00:07.0: reg 0x24: [mem 0xfc501000-0xfc501fff]
+[    0.720151] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
+[    0.720157] pci 0000:00:08.0: reg 0x10: [io  0x5060-0x5067]
+[    0.720161] pci 0000:00:08.0: reg 0x14: [io  0x5078-0x507b]
+[    0.720164] pci 0000:00:08.0: reg 0x18: [io  0x5068-0x506f]
+[    0.720168] pci 0000:00:08.0: reg 0x1c: [io  0x507c-0x507f]
+[    0.720171] pci 0000:00:08.0: reg 0x20: [io  0x5040-0x504f]
+[    0.720175] pci 0000:00:08.0: reg 0x24: [mem 0xfc502000-0xfc502fff]
+[    0.720238] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
+[    0.720278] pci 0000:00:09.0: System wakeup disabled by ACPI
+[    0.724042] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
+[    0.724062] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.724092] pci 0000:00:0b.0: System wakeup disabled by ACPI
+[    0.728042] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
+[    0.728062] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.728092] pci 0000:00:0c.0: System wakeup disabled by ACPI
+[    0.732042] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
+[    0.732060] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.732090] pci 0000:00:0d.0: System wakeup disabled by ACPI
+[    0.736042] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
+[    0.736061] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
+[    0.736092] pci 0000:00:0e.0: System wakeup disabled by ACPI
+[    0.740047] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
+[    0.740115] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
+[    0.740176] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
+[    0.740237] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
+[    0.740301] pci 0000:00:19.0: [1022:1100] type 00 class 0x060000
+[    0.740368] pci 0000:00:19.1: [1022:1101] type 00 class 0x060000
+[    0.740428] pci 0000:00:19.2: [1022:1102] type 00 class 0x060000
+[    0.740490] pci 0000:00:19.3: [1022:1103] type 00 class 0x060000
+[    0.740589] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
+[    0.740599] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
+[    0.740604] pci 0000:01:04.0: reg 0x14: [mem 0xfc200000-0xfc23ffff]
+[    0.740610] pci 0000:01:04.0: reg 0x18: [io  0x3000-0x307f]
+[    0.740640] pci 0000:01:04.0: supports D1 D2
+[    0.740693] pci 0000:00:09.0: PCI bridge to [bus 01]
+[    0.744002] pci 0000:00:09.0:   bridge window [io  0x3000-0x3fff]
+[    0.744005] pci 0000:00:09.0:   bridge window [mem 0xfc200000-0xfc2fffff]
+[    0.744007] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
+[    0.744058] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
+[    0.744070] pci 0000:02:00.0: reg 0x10: [mem 0xfc300000-0xfc30ffff 64bit]
+[    0.744093] pci 0000:02:00.0: reg 0x30: [mem 0x0d080000-0x0d08ffff pref]
+[    0.744133] pci 0000:02:00.0: PME# supported from D3hot D3cold
+[    0.744185] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.748007] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[    0.752003] pci 0000:00:0b.0:   bridge window [mem 0xfc300000-0xfc3fffff]
+[    0.752054] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
+[    0.752066] pci 0000:03:00.0: reg 0x10: [mem 0xfc400000-0xfc40ffff 64bit]
+[    0.752127] pci 0000:03:00.0: PME# supported from D3hot D3cold
+[    0.752179] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.756005] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[    0.760003] pci 0000:00:0c.0:   bridge window [mem 0xfc400000-0xfc4fffff]
+[    0.760042] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[    0.764047] pci 0000:05:00.0: [111d:8018] type 01 class 0x060400
+[    0.764088] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
+[    0.764135] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.768004] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
+[    0.772002] pci 0000:00:0e.0:   bridge window [io  0x1000-0x2fff]
+[    0.772005] pci 0000:00:0e.0:   bridge window [mem 0xfc000000-0xfc1fffff]
+[    0.772050] pci 0000:06:00.0: [111d:8018] type 01 class 0x060400
+[    0.772098] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
+[    0.772146] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.776008] pci 0000:06:01.0: [111d:8018] type 01 class 0x060400
+[    0.776057] pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
+[    0.776105] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.780020] pci 0000:05:00.0: PCI bridge to [bus 06-08]
+[    0.784005] pci 0000:05:00.0:   bridge window [io  0x1000-0x2fff]
+[    0.784009] pci 0000:05:00.0:   bridge window [mem 0xfc000000-0xfc1fffff]
+[    0.784070] pci 0000:07:00.0: [8086:10bc] type 00 class 0x020000
+[    0.784082] pci 0000:07:00.0: reg 0x10: [mem 0xfc000000-0xfc01ffff]
+[    0.784092] pci 0000:07:00.0: reg 0x14: [mem 0xfc020000-0xfc03ffff]
+[    0.784101] pci 0000:07:00.0: reg 0x18: [io  0x1000-0x101f]
+[    0.784133] pci 0000:07:00.0: reg 0x30: [mem 0xfc040000-0xfc05ffff pref]
+[    0.784175] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
+[    0.784238] pci 0000:07:00.1: [8086:10bc] type 00 class 0x020000
+[    0.784250] pci 0000:07:00.1: reg 0x10: [mem 0xfc060000-0xfc07ffff]
+[    0.784260] pci 0000:07:00.1: reg 0x14: [mem 0xfc080000-0xfc09ffff]
+[    0.784269] pci 0000:07:00.1: reg 0x18: [io  0x1020-0x103f]
+[    0.784301] pci 0000:07:00.1: reg 0x30: [mem 0xfc0a0000-0xfc0bffff pref]
+[    0.784343] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold
+[    0.788056] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.792009] pci 0000:06:00.0: PCI bridge to [bus 07]
+[    0.796005] pci 0000:06:00.0:   bridge window [io  0x1000-0x1fff]
+[    0.796009] pci 0000:06:00.0:   bridge window [mem 0xfc000000-0xfc0fffff]
+[    0.796072] pci 0000:08:00.0: [8086:10bc] type 00 class 0x020000
+[    0.796084] pci 0000:08:00.0: reg 0x10: [mem 0xfc100000-0xfc11ffff]
+[    0.796094] pci 0000:08:00.0: reg 0x14: [mem 0xfc120000-0xfc13ffff]
+[    0.796103] pci 0000:08:00.0: reg 0x18: [io  0x2000-0x201f]
+[    0.796135] pci 0000:08:00.0: reg 0x30: [mem 0xfc140000-0xfc15ffff pref]
+[    0.796177] pci 0000:08:00.0: PME# supported from D0 D3hot
+[    0.796240] pci 0000:08:00.1: [8086:10bc] type 00 class 0x020000
+[    0.796252] pci 0000:08:00.1: reg 0x10: [mem 0xfc160000-0xfc17ffff]
+[    0.796261] pci 0000:08:00.1: reg 0x14: [mem 0xfc180000-0xfc19ffff]
+[    0.796271] pci 0000:08:00.1: reg 0x18: [io  0x2020-0x203f]
+[    0.796302] pci 0000:08:00.1: reg 0x30: [mem 0xfc1a0000-0xfc1bffff pref]
+[    0.796344] pci 0000:08:00.1: PME# supported from D0 D3hot
+[    0.796401] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
+[    0.800009] pci 0000:06:01.0: PCI bridge to [bus 08]
+[    0.804005] pci 0000:06:01.0:   bridge window [io  0x2000-0x2fff]
+[    0.804009] pci 0000:06:01.0:   bridge window [mem 0xfc100000-0xfc1fffff]
+[    0.804045] pci_bus 0000:00: on NUMA node 0
+[    0.804102] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
+[    0.812348] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
+[    0.817548] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
+[    0.825602] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
+[    0.832247] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
+[    0.840247] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
+[    0.846711] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
+[    0.849545] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
+[    0.853548] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
+[    0.858711] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
+[    0.865877] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
+[    0.873216] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
+[    0.877542] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
+[    0.885188] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
+[    0.892246] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
+[    0.898708] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
+[    0.902711] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
+[    0.911561] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
+[    0.913877] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
+[    0.920247] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
+[    0.925877] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
+[    0.933376] ACPI: Enabled 1 GPEs in block 00 to 1F
+[    0.936095] vgaarb: setting as boot device: PCI:0000:01:04.0
+[    0.940000] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
+[    0.952008] vgaarb: loaded
+[    0.954714] vgaarb: bridge control possible 0000:01:04.0
+[    0.960117] PCI: Using ACPI for IRQ routing
+[    0.964004] PCI: pci_cache_line_size set to 64 bytes
+[    0.964064] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
+[    0.964067] e820: reserve RAM buffer [mem 0xbff9f000-0xbfffffff]
+[    0.964258] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
+[    0.968005] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
+[    0.976556] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
+[    0.984041] Switched to clocksource hpet
+[    0.996385] pnp: PnP ACPI init
+[    0.999456] ACPI: bus type PNP registered
+[    1.003848] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
+[    1.003901] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
+[    1.003959] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
+[    1.004018] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
+[    1.004049] pnp 00:04: [dma 2]
+[    1.004076] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
+[    1.004092] pnp: PnP ACPI: found 5 devices
+[    1.008187] ACPI: bus type PNP unregistered
+[    1.019721] pci 0000:02:00.0: can't claim BAR 6 [mem 0x0d080000-0x0d08ffff pref]: no compatible bridge window
+[    1.029678] pci 0000:00:09.0: PCI bridge to [bus 01]
+[    1.034637] pci 0000:00:09.0:   bridge window [io  0x3000-0x3fff]
+[    1.040730] pci 0000:00:09.0:   bridge window [mem 0xfc200000-0xfc2fffff]
+[    1.047515] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
+[    1.054742] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc310000-0xfc31ffff pref]
+[    1.061958] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[    1.066921] pci 0000:00:0b.0:   bridge window [mem 0xfc300000-0xfc3fffff]
+[    1.073707] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[    1.078673] pci 0000:00:0c.0:   bridge window [mem 0xfc400000-0xfc4fffff]
+[    1.085459] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[    1.090428] pci 0000:06:00.0: PCI bridge to [bus 07]
+[    1.095390] pci 0000:06:00.0:   bridge window [io  0x1000-0x1fff]
+[    1.101485] pci 0000:06:00.0:   bridge window [mem 0xfc000000-0xfc0fffff]
+[    1.108275] pci 0000:06:01.0: PCI bridge to [bus 08]
+[    1.113234] pci 0000:06:01.0:   bridge window [io  0x2000-0x2fff]
+[    1.119323] pci 0000:06:01.0:   bridge window [mem 0xfc100000-0xfc1fffff]
+[    1.126111] pci 0000:05:00.0: PCI bridge to [bus 06-08]
+[    1.131330] pci 0000:05:00.0:   bridge window [io  0x1000-0x2fff]
+[    1.137419] pci 0000:05:00.0:   bridge window [mem 0xfc000000-0xfc1fffff]
+[    1.144207] pci 0000:00:0e.0: PCI bridge to [bus 05-08]
+[    1.149427] pci 0000:00:0e.0:   bridge window [io  0x1000-0x2fff]
+[    1.155519] pci 0000:00:0e.0:   bridge window [mem 0xfc000000-0xfc1fffff]
+[    1.162308] pci_bus 0000:00: resource 4 [io  0x0d00-0x5fff]
+[    1.162310] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
+[    1.162312] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc5fffff]
+[    1.162313] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
+[    1.162315] pci_bus 0000:00: resource 8 [io  0x0000-0x0cf7]
+[    1.162318] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
+[    1.162319] pci_bus 0000:01: resource 1 [mem 0xfc200000-0xfc2fffff]
+[    1.162321] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
+[    1.162324] pci_bus 0000:02: resource 1 [mem 0xfc300000-0xfc3fffff]
+[    1.162326] pci_bus 0000:03: resource 1 [mem 0xfc400000-0xfc4fffff]
+[    1.162328] pci_bus 0000:05: resource 0 [io  0x1000-0x2fff]
+[    1.162330] pci_bus 0000:05: resource 1 [mem 0xfc000000-0xfc1fffff]
+[    1.162332] pci_bus 0000:06: resource 0 [io  0x1000-0x2fff]
+[    1.162334] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfc1fffff]
+[    1.162336] pci_bus 0000:07: resource 0 [io  0x1000-0x1fff]
+[    1.162338] pci_bus 0000:07: resource 1 [mem 0xfc000000-0xfc0fffff]
+[    1.162340] pci_bus 0000:08: resource 0 [io  0x2000-0x2fff]
+[    1.162342] pci_bus 0000:08: resource 1 [mem 0xfc100000-0xfc1fffff]
+[    1.162418] NET: Registered protocol family 2
+[    1.167100] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
+[    1.174528] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
+[    1.181446] TCP: Hash tables configured (established 32768 bind 32768)
+[    1.188067] TCP: reno registered
+[    1.191301] UDP hash table entries: 2048 (order: 4, 65536 bytes)
+[    1.197356] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
+[    1.203963] NET: Registered protocol family 1
+[    1.208606] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
+[    1.214578] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
+[    1.220420] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.225927] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.231415] pci 0000:00:0b.0: Found disabled HT MSI Mapping
+[    1.236991] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.242498] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.247986] pci 0000:00:0c.0: Found disabled HT MSI Mapping
+[    1.253561] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.259073] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.264558] pci 0000:00:0d.0: Found disabled HT MSI Mapping
+[    1.270131] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.275646] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.281127] pci 0000:00:0e.0: Found disabled HT MSI Mapping
+[    1.286702] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[    1.292203] pci 0000:01:04.0: Video device with shadowed ROM
+[    1.292228] PCI: CLS 64 bytes, default 64
+[    1.292306] Unpacking initramfs...
+[    1.565057] Freeing initrd memory: 14028K (ffff88007f24c000 - ffff88007ffff000)
+[    1.572785] PCI-DMA: Disabling AGP.
+[    1.576413] PCI-DMA: aperture base @ b4000000 size 65536 KB
+[    1.582000] PCI-DMA: using GART IOMMU.
+[    1.585766] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
+[    1.595205] platform rtc_cmos: registered platform RTC device (no PNP device found)
+[    1.603009] microcode: AMD CPU family 0xf not supported
+[    1.608618] futex hash table entries: 1024 (order: 4, 65536 bytes)
+[    1.614867] audit: initializing netlink subsys (disabled)
+[    1.620297] audit: type=2000 audit(1460056685.620:1): initialized
+[    1.626853] HugeTLB registered 2 MB page size, pre-allocated 0 pages
+[    1.633227] zbud: loaded
+[    1.635967] VFS: Disk quotas dquot_6.5.2
+[    1.639914] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[    1.646420] msgmni has been set to 7926
+[    1.650699] alg: No test for stdrng (krng)
+[    1.654849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
+[    1.662317] io scheduler noop registered
+[    1.666239] io scheduler deadline registered
+[    1.670559] io scheduler cfq registered (default)
+[    1.675543] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+[    1.681128] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
+[    1.687804] GHES: HEST is not enabled!
+[    1.691640] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+[    1.718180] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
+[    1.745790] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
+[    1.753532] Linux agpgart interface v0.103
+[    1.757747] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
+[    1.767900] serio: i8042 KBD port at 0x60,0x64 irq 1
+[    1.772870] serio: i8042 AUX port at 0x60,0x64 irq 12
+[    1.778145] mousedev: PS/2 mouse device common for all mice
+[    1.783845] rtc_cmos rtc_cmos: RTC can wake from S4
+[    1.788881] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
+[    1.795259] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
+[    1.803102] ledtrig-cpu: registered to indicate activity on CPUs
+[    1.809208] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
+[    1.815645] AMD IOMMUv2 functionality not available on this system
+[    1.821931] TCP: cubic registered
+[    1.825317] NET: Registered protocol family 10
+[    1.830062] mip6: Mobile IPv6
+[    1.833033] NET: Registered protocol family 17
+[    1.837479] mpls_gso: MPLS GSO support
+[    1.841663] registered taskstats version 1
+[    1.846363] rtc_cmos rtc_cmos: setting system clock to 2016-04-07 19:18:07 UTC (1460056687)
+[    1.854775] PM: Hibernation image not present or could not be loaded.
+[    1.856082] Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
+[    1.863911] Write protecting the kernel read-only data: 8192k
+[    1.872058] Freeing unused kernel memory: 924K (ffff880001519000 - ffff880001600000)
+[    1.880340] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
+[    1.899320] systemd-udevd[72]: starting version 215
+[    1.904610] random: systemd-udevd urandom read with 3 bits of entropy available
+[    1.922712] pps_core: LinuxPPS API ver. 1 registered
+[    1.927691] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+[    1.937002] ACPI: bus type USB registered
+[    1.941165] PTP clock support registered
+[    1.941184] usbcore: registered new interface driver usbfs
+[    1.941198] usbcore: registered new interface driver hub
+[    1.941295] usbcore: registered new device driver usb
+[    1.942187] FDC 0 is a post-1991 82077
+[    1.965237] SCSI subsystem initialized
+[    1.969250] tg3.c:v3.137 (May 11, 2014)
+[    1.973104] tg3 0000:02:00.0: enabling device (0004 -> 0006)
+[    1.978998] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
+[    1.984837] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
+[    1.991095] libata version 3.00 loaded.
+[    1.991445] pata_amd 0000:00:06.0: version 0.4.1
+[    1.991731] ACPI: PCI Interrupt Link [LNND] enabled at IRQ 19
+[    1.991882] scsi0 : pata_amd
+[    2.000594] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
+[    2.001613] scsi1 : pata_amd
+[    2.001684] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x5020 irq 14
+[    2.001685] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x5028 irq 15
+[    2.001913] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
+[    2.032859] e1000e 0000:07:00.0: irq 40 for MSI/MSI-X
+[    2.032965] sata_nv 0000:00:07.0: version 3.5
+[    2.033022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[    2.033170] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
+[    2.033552] scsi2 : sata_nv
+[    2.033660] scsi3 : sata_nv
+[    2.033707] ata3: SATA max UDMA/133 cmd 0x5050 ctl 0x5070 bmdma 0x5030 irq 21
+[    2.033709] ata4: SATA max UDMA/133 cmd 0x5058 ctl 0x5074 bmdma 0x5038 irq 21
+[    2.033821] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
+[    2.034137] scsi4 : sata_nv
+[    2.034242] scsi5 : sata_nv
+[    2.034290] ata5: SATA max UDMA/133 cmd 0x5060 ctl 0x5078 bmdma 0x5040 irq 20
+[    2.034291] ata6: SATA max UDMA/133 cmd 0x5068 ctl 0x507c bmdma 0x5048 irq 20
+[    2.091145] ehci-pci: EHCI PCI platform driver
+[    2.095704] ehci-pci 0000:00:02.1: EHCI Host Controller
+[    2.101007] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[    2.101072] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
+[    2.101083] ehci-pci 0000:00:02.1: debug port 1
+[    2.101121] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
+[    2.101139] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc503000
+[    2.112022] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
+[    2.112074] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+[    2.112076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    2.112077] usb usb1: Product: EHCI Host Controller
+[    2.112078] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
+[    2.112079] usb usb1: SerialNumber: 0000:00:02.1
+[    2.112269] hub 1-0:1.0: USB hub found
+[    2.112278] hub 1-0:1.0: 10 ports detected
+[    2.114566] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d4:d3
+[    2.114568] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[    2.114570] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[    2.114571] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
+[    2.114633] tg3 0000:03:00.0: enabling device (0004 -> 0006)
+[    2.114769] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
+[    2.208964] e1000e 0000:07:00.0 eth1: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c9
+[    2.208965] e1000e 0000:07:00.0 eth1: Intel(R) PRO/1000 Network Connection
+[    2.209039] e1000e 0000:07:00.0 eth1: MAC: 0, PHY: 4, PBA No: D72468-003
+[    2.209214] ACPI: PCI Interrupt Link [LNIC] enabled at IRQ 18
+[    2.209305] e1000e 0000:07:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
+[    2.209331] e1000e 0000:07:00.1: irq 41 for MSI/MSI-X
+[    2.250592] ohci-pci: OHCI PCI platform driver
+[    2.255300] ohci-pci 0000:00:02.0: OHCI PCI host controller
+[    2.260873] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
+[    2.268285] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc500000
+[    2.291135] tg3 0000:03:00.0 eth2: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:23:54:37:d5:e9
+[    2.301397] tg3 0000:03:00.0 eth2: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[    2.311125] tg3 0000:03:00.0 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[    2.318951] tg3 0000:03:00.0 eth2: dma_rwctrl[76180000] dma_mask[64-bit]
+[    2.330037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+[    2.336823] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[    2.344041] usb usb2: Product: OHCI PCI host controller
+[    2.348025] ata3: SATA link down (SStatus 0 SControl 300)
+[    2.348030] ata5: SATA link down (SStatus 0 SControl 300)
+[    2.360051] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
+[    2.366139] usb usb2: SerialNumber: 0000:00:02.0
+[    2.370937] hub 2-0:1.0: USB hub found
+[    2.374706] hub 2-0:1.0: 10 ports detected
+[    2.384778] e1000e 0000:07:00.1 eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:c8
+[    2.392690] e1000e 0000:07:00.1 eth3: Intel(R) PRO/1000 Network Connection
+[    2.399640] e1000e 0000:07:00.1 eth3: MAC: 0, PHY: 4, PBA No: D72468-003
+[    2.406511] e1000e 0000:08:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
+[    2.415836] e1000e 0000:08:00.0: irq 42 for MSI/MSI-X
+[    2.588744] e1000e 0000:08:00.0 eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:cb
+[    2.596658] e1000e 0000:08:00.0 eth4: Intel(R) PRO/1000 Network Connection
+[    2.603607] e1000e 0000:08:00.0 eth4: MAC: 0, PHY: 4, PBA No: D72468-003
+[    2.610390] e1000e 0000:08:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
+[    2.619699] e1000e 0000:08:00.1: irq 43 for MSI/MSI-X
+[    2.680012] ata4: SATA link down (SStatus 0 SControl 300)
+[    2.792730] e1000e 0000:08:00.1 eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:4e:46:ca
+[    2.800648] e1000e 0000:08:00.1 eth5: Intel(R) PRO/1000 Network Connection
+[    2.807594] e1000e 0000:08:00.1 eth5: MAC: 0, PHY: 4, PBA No: D72468-003
+[    2.996012] ata6: SATA link down (SStatus 0 SControl 300)
+[    3.010737] FS-Cache: Loaded
+[    3.016941] RPC: Registered named UNIX socket transport module.
+[    3.024083] RPC: Registered udp transport module.
+[    3.030170] RPC: Registered tcp transport module.
+[    3.036248] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[    3.047620] FS-Cache: Netfs 'nfs' registered for caching
+[    3.057894] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
+[    3.104108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+[    4.833462] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
+[    4.836697] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
+[    4.836697] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[    5.553206] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
+[    5.566684] systemd[1]: Detected architecture 'x86-64'.
+[    5.785751] systemd[1]: Inserted module 'autofs4'
+[    5.791252] systemd[1]: Set hostname to <cb-test-tgt>.
+[    5.861817] random: nonblocking pool is initialized
+[    6.002892] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
+[    6.015634] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
+[    6.030868] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
+[    6.038597] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+[    6.046175] systemd[1]: Expecting device dev-ttyS0.device...
+[    6.060144] systemd[1]: Starting Remote File Systems (Pre).
+[    6.076078] systemd[1]: Reached target Remote File Systems (Pre).
+[    6.082207] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
+[    6.104101] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
+[    6.113539] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
+[    6.121621] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+[    6.129541] systemd[1]: Starting Paths.
+[    6.144056] systemd[1]: Reached target Paths.
+[    6.148431] systemd[1]: Starting Encrypted Volumes.
+[    6.164058] systemd[1]: Reached target Encrypted Volumes.
+[    6.169473] systemd[1]: Starting Swap.
+[    6.184052] systemd[1]: Reached target Swap.
+[    6.188338] systemd[1]: Starting Root Slice.
+[    6.200056] systemd[1]: Created slice Root Slice.
+[    6.204780] systemd[1]: Starting User and Session Slice.
+[    6.220063] systemd[1]: Created slice User and Session Slice.
+[    6.225822] systemd[1]: Starting Delayed Shutdown Socket.
+[    6.240058] systemd[1]: Listening on Delayed Shutdown Socket.
+[    6.245819] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
+[    6.264054] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+[    6.271026] systemd[1]: Starting Journal Socket (/dev/log).
+[    6.288059] systemd[1]: Listening on Journal Socket (/dev/log).
+[    6.294004] systemd[1]: Starting udev Kernel Socket.
+[    6.308043] systemd[1]: Listening on udev Kernel Socket.
+[    6.313373] systemd[1]: Starting udev Control Socket.
+[    6.328050] systemd[1]: Listening on udev Control Socket.
+[    6.333467] systemd[1]: Starting Journal Socket.
+[    6.348043] systemd[1]: Listening on Journal Socket.
+[    6.353030] systemd[1]: Starting System Slice.
+[    6.368046] systemd[1]: Created slice System Slice.
+[    6.372937] systemd[1]: Starting system-getty.slice.
+[    6.388058] systemd[1]: Created slice system-getty.slice.
+[    6.393469] systemd[1]: Starting system-serial\x2dgetty.slice.
+[    6.408052] systemd[1]: Created slice system-serial\x2dgetty.slice.
+[    6.414350] systemd[1]: Starting Increase datagram queue length...
+[    6.432652] systemd[1]: Mounting Huge Pages File System...
+[    6.448703] systemd[1]: Starting udev Coldplug all Devices...
+[    6.658405] systemd[1]: Starting Load Kernel Modules...
+[    6.672601] systemd[1]: Mounting POSIX Message Queue File System...
+[    6.715407] systemd[1]: Started Set Up Additional Binary Formats.
+[    6.721589] systemd[1]: Mounting Debug File System...
+[    6.736844] systemd[1]: Starting Create list of required static device nodes for the current kernel...
+[    6.760509] systemd[1]: Starting Slices.
+[    6.772055] systemd[1]: Reached target Slices.
+[    6.776521] systemd[1]: Starting Remount Root and Kernel File Systems...
+[    6.800125] systemd[1]: Mounted Debug File System.
+[    6.816061] systemd[1]: Mounted POSIX Message Queue File System.
+[    6.832103] systemd[1]: Mounted Huge Pages File System.
+[    6.848063] systemd[1]: Started Increase datagram queue length.
+[    6.864082] systemd[1]: Started Load Kernel Modules.
+[    6.884085] systemd[1]: Started Create list of required static device nodes for the current kernel.
+[    6.904105] systemd[1]: Started Remount Root and Kernel File Systems.
+[    6.920067] systemd[1]: Started udev Coldplug all Devices.
+[    6.951261] systemd[1]: Started Various fixups to make systemd work better on Debian.
+[    6.959124] systemd[1]: Starting Load/Save Random Seed...
+[    6.972930] systemd[1]: Starting Create Static Device Nodes in /dev...
+[    6.988773] systemd[1]: Mounted Configuration File System.
+[    6.994332] systemd[1]: Starting Apply Kernel Variables...
+[    7.008790] systemd[1]: Mounted FUSE Control File System.
+[    7.014260] systemd[1]: Starting Syslog Socket.
+[    7.028113] systemd[1]: Listening on Syslog Socket.
+[    7.033043] systemd[1]: Starting Sockets.
+[    7.044047] systemd[1]: Reached target Sockets.
+[    7.048596] systemd[1]: Starting Journal Service...
+[    7.072120] systemd[1]: Started Journal Service.
+[    7.207798] systemd-udevd[174]: starting version 215
+[    7.466134] systemd-journald[173]: Received request to flush runtime journal from PID 1
+[    7.970515] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+[    7.979828] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
+[    7.988216] ACPI: Power Button [PWRB]
+[    7.992043] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
+[    7.992071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
+[    7.992073] ACPI: Power Button [PWRF]
+[    8.012727] EDAC MC: Ver: 3.0.0
+[    8.016374] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
+[    8.025049] i2c i2c-0: nForce2 SMBus adapter at 0x4c80
+[    8.025272] systemd-udevd[204]: renamed network interface eth1 to eth6
+[    8.036067] input: PC Speaker as /devices/platform/pcspkr/input/input4
+[    8.043666] i2c i2c-1: nForce2 SMBus adapter at 0x4cc0
+[    8.049119] MCE: In-kernel MCE decoding enabled.
+[    8.075980] AMD64 EDAC driver v3.4.0
+[    8.080304] EDAC amd64: DRAM ECC enabled.
+[    8.084321] EDAC amd64: K8 revF or later detected (node 0).
+[    8.089905] EDAC MC: DCT0 chip selects:
+[    8.089907] EDAC amd64: MC: 0:     0MB 1:     0MB
+[    8.094609] EDAC amd64: MC: 2:     0MB 3:     0MB
+[    8.099316] EDAC amd64: MC: 4:  1024MB 5:  1024MB
+[    8.104027] EDAC amd64: MC: 6:  1024MB 7:  1024MB
+[    8.108759] EDAC amd64: CS4: Registered DDR2 RAM
+[    8.113381] EDAC amd64: CS5: Registered DDR2 RAM
+[    8.117999] EDAC amd64: CS6: Registered DDR2 RAM
+[    8.122618] EDAC amd64: CS7: Registered DDR2 RAM
+[    8.127453] EDAC MC0: Giving out device to module amd64_edac controller K8: DEV 0000:00:18.2 (INTERRUPT)
+[    8.136943] EDAC amd64: DRAM ECC disabled.
+[    8.141057] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
+ Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
+ (Note that use of the override may cause unknown side effects.)
+[    8.165401] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
+[    8.186568] kvm: Nested Virtualization enabled
+[    8.197010] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
+[    8.203188] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
+[    8.209615] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
+[    8.215703] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
+[    8.220843] powernow_k8: fid 0xe (2200 MHz), vid 0x12
+[    8.225902] powernow_k8: fid 0xc (2000 MHz), vid 0x12
+[    8.230958] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
+[    8.236148] powernow_k8: fid 0x16 (3000 MHz), vid 0xa
+[    8.241201] powernow_k8: fid 0x14 (2800 MHz), vid 0xc
+[    8.246250] powernow_k8: fid 0x12 (2600 MHz), vid 0xe
+[    8.251302] powernow_k8: fid 0x10 (2400 MHz), vid 0x10
+[    8.256442] powernow_k8: fid 0xe (2200 MHz), vid 0x12
+[    8.261493] powernow_k8: fid 0xc (2000 MHz), vid 0x12
+[    8.266547] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
+[    8.273358] powernow_k8: Found 1 Dual-Core AMD Opteron(tm) Processor 8222 (4 cpu cores) (version 2.20.00)
+[    9.101758] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
+[   39.428248] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****