Revert "lenovo/t400/4.5-1564-g6fa36c9c2c-dirty/2017-04-16T13_28_27Z"
This reverts commit e5454d36ca2f96e452a228db9a1485bff2e8f32e.
The commit in question deletes a lot of unrelated files, and needs to be
reverted.
diff --git a/asus/kfsn4-dre/4.2-36-g0ace013/2015-10-31T13:22:12Z/kernel_log.txt b/asus/kfsn4-dre/4.2-36-g0ace013/2015-10-31T13:22:12Z/kernel_log.txt
new file mode 100644
index 0000000..3e2e2f5
--- /dev/null
+++ b/asus/kfsn4-dre/4.2-36-g0ace013/2015-10-31T13:22:12Z/kernel_log.txt
@@ -0,0 +1,750 @@
+[ 0.000000] Initializing cgroup subsys cpuset
+[ 0.000000] Initializing cgroup subsys cpu
+[ 0.000000] Initializing cgroup subsys cpuacct
+[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
+[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
+[ 0.000000] e820: BIOS-provided physical RAM map:
+[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
+[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
+[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
+[ 0.000000] NX (Execute Disable) protection: active
+[ 0.000000] SMBIOS 2.7 present.
+[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.2-36-g0ace013-dirty 10/31/2015
+[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
+[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
+[ 0.000000] AGP: No AGP bridge found
+[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
+[ 0.000000] MTRR default type: uncachable
+[ 0.000000] MTRR fixed ranges enabled:
+[ 0.000000] 00000-9FFFF write-back
+[ 0.000000] A0000-BFFFF uncachable
+[ 0.000000] C0000-FFFFF write-back
+[ 0.000000] MTRR variable ranges enabled:
+[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
+[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
+[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
+[ 0.000000] 3 disabled
+[ 0.000000] 4 disabled
+[ 0.000000] 5 disabled
+[ 0.000000] 6 disabled
+[ 0.000000] 7 disabled
+[ 0.000000] TOM2: 0000000180000000 aka 6144M
+[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
+[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
+[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
+[ 0.000000] Using GB pages for direct mapping
+[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
+[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
+[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
+[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
+[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
+[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
+[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
+[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
+[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
+[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
+[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
+[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
+[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
+[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
+[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
+[ 0.000000] ACPI: Early table checksum verification disabled
+[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
+[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
+[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
+[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
+[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
+[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
+[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
+[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
+[ 0.000000] NUMA: Initialized distance table, cnt=3
+[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
+[ 0.000000] Scanning NUMA topology in Northbridge 24
+[ 0.000000] Number of physical nodes 2
+[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
+[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
+[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
+[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
+[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
+[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
+[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
+[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
+[ 0.000000] Zone ranges:
+[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
+[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
+[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
+[ 0.000000] Movable zone start for each node
+[ 0.000000] Early memory node ranges
+[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
+[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
+[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
+[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
+[ 0.000000] On node 0 totalpages: 1048377
+[ 0.000000] DMA zone: 56 pages used for memmap
+[ 0.000000] DMA zone: 21 pages reserved
+[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
+[ 0.000000] DMA32 zone: 10695 pages used for memmap
+[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
+[ 0.000000] Normal zone: 3584 pages used for memmap
+[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
+[ 0.000000] On node 1 totalpages: 262144
+[ 0.000000] Normal zone: 3584 pages used for memmap
+[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
+[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
+[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
+[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
+[ 0.000000] ACPI: IRQ9 used by override.
+[ 0.000000] ACPI: IRQ14 used by override.
+[ 0.000000] ACPI: IRQ15 used by override.
+[ 0.000000] Using ACPI (MADT) for SMP configuration information
+[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
+[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
+[ 0.000000] nr_irqs_gsi: 40
+[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
+[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
+[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
+[ 0.000000] Booting paravirtualized kernel on bare hardware
+[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
+[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
+[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
+[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
+[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
+[ 0.000000] Policy zone: Normal
+[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
+[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
+[ 0.000000] AGP: Checking aperture...
+[ 0.000000] AGP: No AGP bridge found
+[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5f8000000-0xe5f9ffffff] (32MB)
+[ 0.000000] Aperture beyond 4GB. Ignoring.
+[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
+[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
+[ 0.000000] AGP: This costs you 64MB of RAM
+[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
+[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
+[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
+[ 0.000000] Hierarchical RCU implementation.
+[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
+[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
+[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
+[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
+[ 0.000000] spurious 8259A interrupt: IRQ7.
+[ 0.000000] Console: colour VGA+ 80x25
+[ 0.000000] console [ttyS0] enabled
+[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
+[ 0.000000] hpet clockevent registered
+[ 0.000000] tsc: Fast TSC calibration using PIT
+[ 0.000000] tsc: Detected 1909.850 MHz processor
+[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.70 BogoMIPS (lpj=7639400)
+[ 0.010794] pid_max: default: 32768 minimum: 301
+[ 0.015449] ACPI: Core revision 20140424
+[ 0.021801] ACPI: All ACPI Tables successfully acquired
+[ 0.027162] Security Framework initialized
+[ 0.031289] AppArmor: AppArmor disabled by boot time parameter
+[ 0.037124] Yama: disabled by default; enable with sysctl kernel.yama.*
+[ 0.044869] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
+[ 0.058085] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[ 0.067844] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[ 0.074744] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[ 0.082597] Initializing cgroup subsys memory
+[ 0.086976] Initializing cgroup subsys devices
+[ 0.091445] Initializing cgroup subsys freezer
+[ 0.095909] Initializing cgroup subsys net_cls
+[ 0.100368] Initializing cgroup subsys blkio
+[ 0.104654] Initializing cgroup subsys perf_event
+[ 0.109362] Initializing cgroup subsys net_prio
+[ 0.113943] tseg: 0000000000
+[ 0.113956] CPU: Physical Processor ID: 0
+[ 0.117974] CPU: Processor Core ID: 0
+[ 0.121662] mce: CPU supports 6 MCE banks
+[ 0.125692] LVT offset 0 assigned for vector 0xf9
+[ 0.130421] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
+Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
+tlb_flushall_shift: 6
+[ 0.145760] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
+[ 0.154765] ftrace: allocating 21601 entries in 85 pages
+[ 0.170158] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
+[ 0.215684] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
+[ 0.332510] Performance Events: AMD PMU driver.
+[ 0.337081] ... version: 0
+[ 0.341093] ... bit width: 48
+[ 0.345191] ... generic registers: 4
+[ 0.349203] ... value mask: 0000ffffffffffff
+[ 0.354503] ... max period: 00007fffffffffff
+[ 0.359833] ... fixed-purpose events: 0
+[ 0.363843] ... event mask: 000000000000000f
+[ 0.371765] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
+[ 0.379968] x86: Booting SMP configuration:
+[ 0.384163] .... node #0, CPUs: #1 #2 #3
+[ 0.428512] .... node #1, CPUs: #4 #5 #6 #7
+[ 0.581162] x86: Booted up 2 nodes, 8 CPUs
+[ 0.585463] smpboot: Total of 8 processors activated (30558.00 BogoMIPS)
+[ 0.598057] devtmpfs: initialized
+[ 0.609945] pinctrl core: initialized pinctrl subsystem
+[ 0.615339] NET: Registered protocol family 16
+[ 0.620000] cpuidle: using governor ladder
+[ 0.624105] cpuidle: using governor menu
+[ 0.628042] node 0 link 1: io port [1000, 3fff]
+[ 0.628045] TOM: 00000000c0000000 aka 3072M
+[ 0.632238] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
+[ 0.632242] node 0 link 1: mmio [fc000000, fc3fffff]
+[ 0.632246] node 0 link 1: mmio [f8000000, fbffffff]
+[ 0.632248] TOM2: 0000000180000000 aka 6144M
+[ 0.636527] bus: [bus 00-05] on node 0 link 1
+[ 0.636529] bus: 00 [io 0x0000-0xffff]
+[ 0.636530] bus: 00 [mem 0xd0000000-0xffffffff]
+[ 0.636532] bus: 00 [mem 0x180000000-0xfcffffffff]
+[ 0.636637] ACPI: bus type PCI registered
+[ 0.640650] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+[ 0.647254] PCI: Using configuration type 1 for base access
+[ 0.652831] PCI: Using configuration type 1 for extended access
+[ 0.659374] mtrr: your CPUs had inconsistent variable MTRR settings
+[ 0.665644] mtrr: probably your BIOS does not setup all CPUs.
+[ 0.671387] mtrr: corrected configuration.
+[ 0.685288] ACPI: Added _OSI(Module Device)
+[ 0.689481] ACPI: Added _OSI(Processor Device)
+[ 0.693931] ACPI: Added _OSI(3.0 _SCP Extensions)
+[ 0.698643] ACPI: Added _OSI(Processor Aggregator Device)
+[ 0.707623] ACPI: Interpreter enabled
+[ 0.711306] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
+[ 0.720571] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
+[ 0.729825] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
+[ 0.739098] ACPI: (supports S0 S1 S5)
+[ 0.742768] ACPI: Using IOAPIC for interrupt routing
+[ 0.747777] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[ 0.775776] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
+[ 0.781969] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
+[ 0.790188] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
+[ 0.827092] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
+[ 0.837128] PCI host bridge to bus 0000:00
+[ 0.841233] pci_bus 0000:00: root bus resource [bus 00-05]
+[ 0.846725] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
+[ 0.852910] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
+[ 0.859789] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
+[ 0.866667] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
+[ 0.873538] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
+[ 0.879734] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
+[ 0.879933] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
+[ 0.879940] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
+[ 0.880088] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
+[ 0.880098] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
+[ 0.880117] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
+[ 0.880137] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
+[ 0.880164] pci 0000:00:01.1: PME# supported from D3hot D3cold
+[ 0.880271] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
+[ 0.880285] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
+[ 0.880321] pci 0000:00:02.0: supports D1 D2
+[ 0.880341] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.880422] pci 0000:00:02.0: System wakeup disabled by ACPI
+[ 0.886142] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
+[ 0.886156] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
+[ 0.886209] pci 0000:00:02.1: supports D1 D2
+[ 0.886219] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.886295] pci 0000:00:02.1: System wakeup disabled by ACPI
+[ 0.892015] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
+[ 0.892042] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
+[ 0.892086] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
+[ 0.899226] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
+[ 0.905758] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
+[ 0.912896] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
+[ 0.919531] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
+[ 0.919541] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
+[ 0.919546] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
+[ 0.919551] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
+[ 0.919555] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
+[ 0.919560] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
+[ 0.919565] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
+[ 0.919733] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
+[ 0.919740] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
+[ 0.919748] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
+[ 0.919752] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
+[ 0.919757] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
+[ 0.919761] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
+[ 0.919766] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
+[ 0.919943] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
+[ 0.920058] pci 0000:00:09.0: System wakeup disabled by ACPI
+[ 0.925778] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
+[ 0.925827] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.925876] pci 0000:00:0b.0: System wakeup disabled by ACPI
+[ 0.931601] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
+[ 0.931654] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.931743] pci 0000:00:0c.0: System wakeup disabled by ACPI
+[ 0.937463] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
+[ 0.937513] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.937568] pci 0000:00:0d.0: System wakeup disabled by ACPI
+[ 0.943290] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
+[ 0.943339] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.943403] pci 0000:00:0e.0: System wakeup disabled by ACPI
+[ 0.949134] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
+[ 0.949274] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
+[ 0.949398] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
+[ 0.949521] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
+[ 0.949670] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
+[ 0.949800] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
+[ 0.949944] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
+[ 0.950081] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
+[ 0.950209] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
+[ 0.950347] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
+[ 0.950544] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
+[ 0.950564] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
+[ 0.950574] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
+[ 0.950581] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
+[ 0.950626] pci 0000:01:04.0: supports D1 D2
+[ 0.950751] pci 0000:00:09.0: PCI bridge to [bus 01]
+[ 0.955723] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
+[ 0.955726] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
+[ 0.955730] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
+[ 0.955848] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
+[ 0.955888] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
+[ 0.955920] pci 0000:02:00.0: reg 0x30: [mem 0x61400000-0x6140ffff pref]
+[ 0.956006] pci 0000:02:00.0: PME# supported from D3hot D3cold
+[ 0.956108] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
+[ 0.966106] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[ 0.971075] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
+[ 0.971184] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
+[ 0.971219] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
+[ 0.971321] pci 0000:03:00.0: PME# supported from D3hot D3cold
+[ 0.971421] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
+[ 0.981423] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[ 0.986393] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
+[ 0.986469] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[ 0.991517] pci 0000:00:0e.0: PCI bridge to [bus 05]
+[ 0.996501] pci_bus 0000:00: on NUMA node 0
+[ 0.996604] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
+[ 1.002758] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
+[ 1.008916] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
+[ 1.016226] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
+[ 1.023522] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
+[ 1.030832] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
+[ 1.038136] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
+[ 1.044283] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
+[ 1.050413] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
+[ 1.057739] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
+[ 1.065044] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
+[ 1.072362] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
+[ 1.078529] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
+[ 1.084678] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
+[ 1.092004] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
+[ 1.099347] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
+[ 1.106656] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
+[ 1.115193] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
+[ 1.121684] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
+[ 1.128157] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
+[ 1.134643] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
+[ 1.141367] ACPI: Enabled 1 GPEs in block 00 to 1F
+[ 1.146487] vgaarb: setting as boot device: PCI:0000:01:04.0
+[ 1.152152] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
+[ 1.160249] vgaarb: loaded
+[ 1.162964] vgaarb: bridge control possible 0000:01:04.0
+[ 1.168442] PCI: Using ACPI for IRQ routing
+[ 1.172637] PCI: pci_cache_line_size set to 64 bytes
+[ 1.172695] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
+[ 1.172698] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
+[ 1.173011] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
+[ 1.180061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
+[ 1.185124] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
+[ 1.193796] Switched to clocksource hpet
+[ 1.209365] pnp: PnP ACPI init
+[ 1.212480] ACPI: bus type PNP registered
+[ 1.217041] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
+[ 1.217120] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
+[ 1.217219] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
+[ 1.217298] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
+[ 1.217338] pnp 00:04: [dma 2]
+[ 1.217384] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
+[ 1.217406] pnp: PnP ACPI: found 5 devices
+[ 1.221510] ACPI: bus type PNP unregistered
+[ 1.233526] pci 0000:02:00.0: can't claim BAR 6 [mem 0x61400000-0x6140ffff pref]: no compatible bridge window
+[ 1.243475] pci 0000:00:09.0: PCI bridge to [bus 01]
+[ 1.248446] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
+[ 1.254547] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
+[ 1.261337] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
+[ 1.268568] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
+[ 1.275795] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[ 1.280769] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
+[ 1.287563] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[ 1.292524] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
+[ 1.299329] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[ 1.304302] pci 0000:00:0e.0: PCI bridge to [bus 05]
+[ 1.309277] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
+[ 1.309279] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
+[ 1.309282] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
+[ 1.309285] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
+[ 1.309287] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
+[ 1.309290] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
+[ 1.309293] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
+[ 1.309295] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
+[ 1.309298] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
+[ 1.309301] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
+[ 1.309426] NET: Registered protocol family 2
+[ 1.314303] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
+[ 1.321998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
+[ 1.329339] TCP: Hash tables configured (established 65536 bind 65536)
+[ 1.335946] TCP: reno registered
+[ 1.339205] UDP hash table entries: 4096 (order: 5, 131072 bytes)
+[ 1.345415] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
+[ 1.352197] NET: Registered protocol family 1
+[ 1.356947] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
+[ 1.363033] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
+[ 1.368933] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.374464] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.379971] pci 0000:00:0b.0: Found disabled HT MSI Mapping
+[ 1.385558] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.391105] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.396608] pci 0000:00:0c.0: Found disabled HT MSI Mapping
+[ 1.402193] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.407723] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.413230] pci 0000:00:0d.0: Found disabled HT MSI Mapping
+[ 1.418811] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.424364] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.429869] pci 0000:00:0e.0: Found disabled HT MSI Mapping
+[ 1.435454] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.440981] pci 0000:01:04.0: Video device with shadowed ROM
+[ 1.440990] PCI: CLS 64 bytes, default 64
+[ 1.441098] Unpacking initramfs...
+[ 1.674112] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
+[ 1.681964] PCI-DMA: Disabling AGP.
+[ 1.687038] PCI-DMA: aperture base @ b4000000 size 65536 KB
+[ 1.692626] PCI-DMA: using GART IOMMU.
+[ 1.696384] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
+[ 1.708410] platform rtc_cmos: registered platform RTC device (no PNP device found)
+[ 1.716592] microcode: CPU0: patch_level=0x00000000
+[ 1.721483] microcode: CPU1: patch_level=0x00000000
+[ 1.726377] microcode: CPU2: patch_level=0x00000000
+[ 1.731279] microcode: CPU3: patch_level=0x00000000
+[ 1.736189] microcode: CPU4: patch_level=0x00000000
+[ 1.741084] microcode: CPU5: patch_level=0x00000000
+[ 1.745985] microcode: CPU6: patch_level=0x00000000
+[ 1.750883] microcode: CPU7: patch_level=0x00000000
+[ 1.755877] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
+[ 1.764673] LVT offset 1 assigned for vector 0x400
+[ 1.769480] IBS: LVT offset 1 assigned
+[ 1.773265] perf: AMD IBS detected (0x00000007)
+[ 1.778414] futex hash table entries: 2048 (order: 5, 131072 bytes)
+[ 1.784806] audit: initializing netlink subsys (disabled)
+[ 1.790231] audit: type=2000 audit(1446301149.516:1): initialized
+[ 1.797111] HugeTLB registered 2 MB page size, pre-allocated 0 pages
+[ 1.803517] zbud: loaded
+[ 1.806419] VFS: Disk quotas dquot_6.5.2
+[ 1.810390] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[ 1.816937] msgmni has been set to 9945
+[ 1.821314] alg: No test for stdrng (krng)
+[ 1.825477] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
+[ 1.832975] io scheduler noop registered
+[ 1.836909] io scheduler deadline registered
+[ 1.841268] io scheduler cfq registered (default)
+[ 1.846186] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
+[ 1.846310] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
+[ 1.846437] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
+[ 1.846562] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
+[ 1.846723] aer 0000:00:0b.0:pcie02: service driver aer loaded
+[ 1.846752] aer 0000:00:0c.0:pcie02: service driver aer loaded
+[ 1.846777] aer 0000:00:0d.0:pcie02: service driver aer loaded
+[ 1.846803] aer 0000:00:0e.0:pcie02: service driver aer loaded
+[ 1.846823] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
+[ 1.853797] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
+[ 1.860333] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
+[ 1.860344] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
+[ 1.867306] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
+[ 1.873838] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
+[ 1.873848] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
+[ 1.880812] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
+[ 1.880822] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
+[ 1.887788] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
+[ 1.887817] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+[ 1.893422] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
+[ 1.900159] GHES: HEST is not enabled!
+[ 1.904051] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+[ 1.930639] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
+[ 1.958323] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
+[ 1.966257] Linux agpgart interface v0.103
+[ 1.970576] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
+[ 1.981074] serio: i8042 KBD port at 0x60,0x64 irq 1
+[ 1.986067] serio: i8042 AUX port at 0x60,0x64 irq 12
+[ 1.991351] mousedev: PS/2 mouse device common for all mice
+[ 1.997027] rtc_cmos rtc_cmos: RTC can wake from S4
+[ 2.002154] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
+[ 2.008556] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
+[ 2.016498] ledtrig-cpu: registered to indicate activity on CPUs
+[ 2.022706] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
+[ 2.029154] AMD IOMMUv2 functionality not available on this system
+[ 2.035491] TCP: cubic registered
+[ 2.038996] NET: Registered protocol family 10
+[ 2.043854] mip6: Mobile IPv6
+[ 2.045404] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
+[ 2.055444] NET: Registered protocol family 17
+[ 2.059904] mpls_gso: MPLS GSO support
+[ 2.064502] registered taskstats version 1
+[ 2.069361] rtc_cmos rtc_cmos: setting system clock to 2015-10-31 14:19:11 UTC (1446301151)
+[ 2.077782] PM: Hibernation image not present or could not be loaded.
+[ 2.079589] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
+[ 2.087447] Write protecting the kernel read-only data: 8192k
+[ 2.096660] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
+[ 2.105249] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
+[ 2.129265] systemd-udevd[99]: starting version 215
+[ 2.135077] random: systemd-udevd urandom read with 4 bits of entropy available
+[ 2.167203] pps_core: LinuxPPS API ver. 1 registered
+[ 2.172191] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+[ 2.181735] ACPI: bus type USB registered
+[ 2.185976] usbcore: registered new interface driver usbfs
+[ 2.186035] PTP clock support registered
+[ 2.195504] usbcore: registered new interface driver hub
+[ 2.201061] usbcore: registered new device driver usb
+[ 2.201161] tg3.c:v3.137 (May 11, 2014)
+[ 2.201173] tg3 0000:02:00.0: enabling device (0004 -> 0006)
+[ 2.201380] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
+[ 2.222381] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[ 2.229518] ehci-pci: EHCI PCI platform driver
+[ 2.234229] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[ 2.234292] ehci-pci 0000:00:02.1: EHCI Host Controller
+[ 2.234309] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
+[ 2.234330] ehci-pci 0000:00:02.1: debug port 1
+[ 2.234378] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
+[ 2.234407] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
+[ 2.245474] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
+[ 2.245564] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+[ 2.245566] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 2.245568] usb usb1: Product: EHCI Host Controller
+[ 2.245569] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
+[ 2.245570] usb usb1: SerialNumber: 0000:00:02.1
+[ 2.245808] hub 1-0:1.0: USB hub found
+[ 2.245816] hub 1-0:1.0: 10 ports detected
+[ 2.307180] ohci-pci: OHCI PCI platform driver
+[ 2.311893] ohci-pci 0000:00:02.0: OHCI PCI host controller
+[ 2.317498] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
+[ 2.324946] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
+[ 2.348556] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
+[ 2.358819] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[ 2.368562] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 2.376392] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 2.383196] tg3 0000:03:00.0: enabling device (0004 -> 0006)
+[ 2.389017] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
+[ 2.391456] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+[ 2.391458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 2.391459] usb usb2: Product: OHCI PCI host controller
+[ 2.391461] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
+[ 2.391462] usb usb2: SerialNumber: 0000:00:02.0
+[ 2.391653] hub 2-0:1.0: USB hub found
+[ 2.391662] hub 2-0:1.0: 10 ports detected
+[ 2.477780] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
+[ 2.488043] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[ 2.497781] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 2.505611] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 2.518833] FS-Cache: Loaded
+[ 2.525956] RPC: Registered named UNIX socket transport module.
+[ 2.532566] RPC: Registered udp transport module.
+[ 2.538677] RPC: Registered tcp transport module.
+[ 2.544763] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[ 2.557208] FS-Cache: Netfs 'nfs' registered for caching
+[ 2.571116] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
+[ 2.617438] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+[ 2.705292] tsc: Refined TSC clocksource calibration: 1909.786 MHz
+[ 3.709046] Switched to clocksource tsc
+[ 4.379442] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
+[ 4.385970] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
+[ 4.392855] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[ 5.074659] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
+[ 5.088343] systemd[1]: Detected architecture 'x86-64'.
+[ 5.308249] systemd[1]: Inserted module 'autofs4'
+[ 5.314335] systemd[1]: Set hostname to <cb-test-tgt>.
+[ 5.393202] random: nonblocking pool is initialized
+[ 5.559079] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
+[ 5.571812] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
+[ 5.587198] systemd[1]: Expecting device dev-ttyS0.device...
+[ 5.600424] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
+[ 5.608212] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+[ 5.615812] systemd[1]: Starting Remote File Systems (Pre).
+[ 5.632344] systemd[1]: Reached target Remote File Systems (Pre).
+[ 5.638475] systemd[1]: Starting Encrypted Volumes.
+[ 5.652311] systemd[1]: Reached target Encrypted Volumes.
+[ 5.657773] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
+[ 5.680311] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
+[ 5.689734] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
+[ 5.697797] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+[ 5.705733] systemd[1]: Starting Paths.
+[ 5.720289] systemd[1]: Reached target Paths.
+[ 5.724688] systemd[1]: Starting Swap.
+[ 5.736312] systemd[1]: Reached target Swap.
+[ 5.740606] systemd[1]: Starting Root Slice.
+[ 5.752316] systemd[1]: Created slice Root Slice.
+[ 5.757037] systemd[1]: Starting User and Session Slice.
+[ 5.772353] systemd[1]: Created slice User and Session Slice.
+[ 5.778164] systemd[1]: Starting Delayed Shutdown Socket.
+[ 5.792261] systemd[1]: Listening on Delayed Shutdown Socket.
+[ 5.798033] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
+[ 5.816271] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+[ 5.823251] systemd[1]: Starting Journal Socket (/dev/log).
+[ 5.840250] systemd[1]: Listening on Journal Socket (/dev/log).
+[ 5.846217] systemd[1]: Starting udev Kernel Socket.
+[ 5.860332] systemd[1]: Listening on udev Kernel Socket.
+[ 5.865735] systemd[1]: Starting udev Control Socket.
+[ 5.880222] systemd[1]: Listening on udev Control Socket.
+[ 5.885672] systemd[1]: Starting Journal Socket.
+[ 5.900223] systemd[1]: Listening on Journal Socket.
+[ 5.905235] systemd[1]: Starting System Slice.
+[ 5.920208] systemd[1]: Created slice System Slice.
+[ 5.925111] systemd[1]: Starting system-getty.slice.
+[ 5.940217] systemd[1]: Created slice system-getty.slice.
+[ 5.945644] systemd[1]: Starting system-serial\x2dgetty.slice.
+[ 5.960208] systemd[1]: Created slice system-serial\x2dgetty.slice.
+[ 5.966527] systemd[1]: Starting Increase datagram queue length...
+[ 5.985107] systemd[1]: Starting udev Coldplug all Devices...
+[ 6.208829] systemd[1]: Starting Load Kernel Modules...
+[ 6.234044] systemd[1]: Started Set Up Additional Binary Formats.
+[ 6.240376] systemd[1]: Mounting Debug File System...
+[ 6.257989] systemd[1]: Starting Create list of required static device nodes for the current kernel...
+[ 6.282107] systemd[1]: Mounting POSIX Message Queue File System...
+[ 6.301856] systemd[1]: Mounting Huge Pages File System...
+[ 6.317019] systemd[1]: Starting Slices.
+[ 6.328133] systemd[1]: Reached target Slices.
+[ 6.332670] systemd[1]: Starting Remount Root and Kernel File Systems...
+[ 6.360143] systemd[1]: Mounted Huge Pages File System.
+[ 6.376105] systemd[1]: Mounted POSIX Message Queue File System.
+[ 6.392092] systemd[1]: Mounted Debug File System.
+[ 6.408080] systemd[1]: Started Increase datagram queue length.
+[ 6.424083] systemd[1]: Started Load Kernel Modules.
+[ 6.444048] systemd[1]: Started Create list of required static device nodes for the current kernel.
+[ 6.468103] systemd[1]: Started Remount Root and Kernel File Systems.
+[ 6.484052] systemd[1]: Started udev Coldplug all Devices.
+[ 6.529466] systemd[1]: Started Various fixups to make systemd work better on Debian.
+[ 6.537329] systemd[1]: Starting Load/Save Random Seed...
+[ 6.553045] systemd[1]: Starting Create Static Device Nodes in /dev...
+[ 6.569588] systemd[1]: Starting Apply Kernel Variables...
+[ 6.586008] systemd[1]: Mounted Configuration File System.
+[ 6.591605] systemd[1]: Mounted FUSE Control File System.
+[ 6.597059] systemd[1]: Starting Syslog Socket.
+[ 6.612042] systemd[1]: Listening on Syslog Socket.
+[ 6.617000] systemd[1]: Starting Sockets.
+[ 6.631956] systemd[1]: Reached target Sockets.
+[ 6.636512] systemd[1]: Starting Journal Service...
+[ 6.663995] systemd[1]: Started Journal Service.
+[ 6.797666] systemd-udevd[189]: starting version 215
+[ 7.064887] systemd-journald[188]: Received request to flush runtime journal from PID 1
+[ 7.500580] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
+[ 7.508754] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
+[ 7.517047] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
+[ 7.525451] ACPI: Power Button [PWRB]
+[ 7.529209] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
+[ 7.538133] ACPI: Power Button [PWRF]
+[ 7.539672] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+[ 7.552651] EDAC MC: Ver: 3.0.0
+[ 7.571619] FDC 0 is a post-1991 82077
+[ 7.586054] SCSI subsystem initialized
+[ 7.640842] MCE: In-kernel MCE decoding enabled.
+[ 7.674064] libata version 3.00 loaded.
+[ 7.674210] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
+[ 7.679562] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
+[ 7.679798] acpi-cpufreq: overriding BIOS provided _PSD data
+[ 7.691958] AMD64 EDAC driver v3.4.0
+[ 7.692291] sata_nv 0000:00:07.0: version 3.5
+[ 7.692654] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
+[ 7.694528] scsi0 : sata_nv
+[ 7.704667] input: PC Speaker as /devices/platform/pcspkr/input/input4
+[ 7.711288] scsi1 : sata_nv
+[ 7.714229] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
+[ 7.721398] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
+[ 7.728939] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
+[ 7.735269] scsi2 : sata_nv
+[ 7.738275] scsi3 : sata_nv
+[ 7.741152] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
+[ 7.748292] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
+[ 7.759478] EDAC amd64: DRAM ECC enabled.
+[ 7.763541] EDAC amd64: F10h detected (node 0).
+[ 7.768141] EDAC MC: DCT0 chip selects:
+[ 7.768143] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 7.772876] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.777607] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.782351] EDAC amd64: MC: 6: 1024MB 7: 1024MB
+[ 7.787080] EDAC MC: DCT1 chip selects:
+[ 7.787083] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 7.791818] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.796556] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.801293] EDAC amd64: MC: 6: 1024MB 7: 1024MB
+[ 7.806030] EDAC amd64: using x4 syndromes.
+[ 7.810247] EDAC amd64: MCT channel count: 2
+[ 7.814642] EDAC amd64: CS6: Registered DDR2 RAM
+[ 7.819300] EDAC amd64: CS7: Registered DDR2 RAM
+[ 7.824596] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
+[ 7.824748] kvm: Nested Virtualization enabled
+[ 7.824757] kvm: Nested Paging enabled
+[ 7.845213] pata_amd 0000:00:06.0: version 0.4.1
+[ 7.846135] scsi4 : pata_amd
+[ 7.849280] scsi5 : pata_amd
+[ 7.852237] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
+[ 7.859208] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
+[ 7.866346] EDAC amd64: DRAM ECC enabled.
+[ 7.870527] EDAC amd64: F10h detected (node 1).
+[ 7.875152] EDAC MC: DCT0 chip selects:
+[ 7.875156] EDAC amd64: MC: 0: 1024MB 1: 0MB
+[ 7.879889] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.884594] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.889315] EDAC amd64: MC: 6: 0MB 7: 0MB
+[ 7.894017] EDAC MC: DCT1 chip selects:
+[ 7.894020] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 7.898730] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.903446] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.908157] EDAC amd64: MC: 6: 0MB 7: 0MB
+[ 7.912861] EDAC amd64: using x4 syndromes.
+[ 7.917046] EDAC amd64: MCT channel count: 1
+[ 7.921403] EDAC amd64: CS0: Registered DDR2 RAM
+[ 7.926310] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
+[ 7.936084] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
+[ 8.043458] ata1: SATA link down (SStatus 0 SControl 300)
+[ 8.067457] ata3: SATA link down (SStatus 0 SControl 300)
+[ 8.359368] ata2: SATA link down (SStatus 0 SControl 300)
+[ 8.675262] ata4: SATA link down (SStatus 0 SControl 300)
+[ 38.610969] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
+[ 300.921432] [Hardware Error]: Corrected error, no action required.
+[ 300.927647] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc224000da080813
+[ 300.937107] [Hardware Error]: MC4_ADDR: 0x000000017dbd6fc0
+[ 300.942612] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
+[ 300.950420] EDAC MC1: 1 CE on mc#1csrow#0channel#0 (csrow:0 channel:0 page:0x17dbd6 offset:0xfc0 grain:0 syndrome:0xda44)
+[ 300.961378] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: SRC (no timeout)