Revert "lenovo/t400/4.5-1564-g6fa36c9c2c-dirty/2017-04-16T13_28_27Z"
This reverts commit e5454d36ca2f96e452a228db9a1485bff2e8f32e.
The commit in question deletes a lot of unrelated files, and needs to be
reverted.
diff --git a/asus/kfsn4-dre/4.1-913-g6fecb71/2015-10-28T21:28:28Z/kernel_log.txt b/asus/kfsn4-dre/4.1-913-g6fecb71/2015-10-28T21:28:28Z/kernel_log.txt
new file mode 100644
index 0000000..39f7d90
--- /dev/null
+++ b/asus/kfsn4-dre/4.1-913-g6fecb71/2015-10-28T21:28:28Z/kernel_log.txt
@@ -0,0 +1,750 @@
+[ 0.000000] Initializing cgroup subsys cpuset
+[ 0.000000] Initializing cgroup subsys cpu
+[ 0.000000] Initializing cgroup subsys cpuacct
+[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
+[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
+[ 0.000000] e820: BIOS-provided physical RAM map:
+[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
+[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
+[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
+[ 0.000000] NX (Execute Disable) protection: active
+[ 0.000000] SMBIOS 2.7 present.
+[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-913-g6fecb71-dirty 10/28/2015
+[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
+[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
+[ 0.000000] AGP: No AGP bridge found
+[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
+[ 0.000000] MTRR default type: uncachable
+[ 0.000000] MTRR fixed ranges enabled:
+[ 0.000000] 00000-9FFFF write-back
+[ 0.000000] A0000-BFFFF uncachable
+[ 0.000000] C0000-FFFFF write-back
+[ 0.000000] MTRR variable ranges enabled:
+[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
+[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
+[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
+[ 0.000000] 3 disabled
+[ 0.000000] 4 disabled
+[ 0.000000] 5 disabled
+[ 0.000000] 6 disabled
+[ 0.000000] 7 disabled
+[ 0.000000] TOM2: 0000000180000000 aka 6144M
+[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
+[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
+[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
+[ 0.000000] Using GB pages for direct mapping
+[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
+[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
+[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
+[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
+[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
+[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
+[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
+[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
+[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
+[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
+[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
+[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
+[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
+[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
+[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
+[ 0.000000] ACPI: Early table checksum verification disabled
+[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
+[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
+[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
+[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
+[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
+[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
+[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
+[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
+[ 0.000000] NUMA: Initialized distance table, cnt=3
+[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
+[ 0.000000] Scanning NUMA topology in Northbridge 24
+[ 0.000000] Number of physical nodes 2
+[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
+[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
+[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
+[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
+[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
+[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
+[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
+[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
+[ 0.000000] Zone ranges:
+[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
+[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
+[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
+[ 0.000000] Movable zone start for each node
+[ 0.000000] Early memory node ranges
+[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
+[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
+[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
+[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
+[ 0.000000] On node 0 totalpages: 1048377
+[ 0.000000] DMA zone: 56 pages used for memmap
+[ 0.000000] DMA zone: 21 pages reserved
+[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
+[ 0.000000] DMA32 zone: 10695 pages used for memmap
+[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
+[ 0.000000] Normal zone: 3584 pages used for memmap
+[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
+[ 0.000000] On node 1 totalpages: 262144
+[ 0.000000] Normal zone: 3584 pages used for memmap
+[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
+[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
+[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
+[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
+[ 0.000000] ACPI: IRQ9 used by override.
+[ 0.000000] ACPI: IRQ14 used by override.
+[ 0.000000] ACPI: IRQ15 used by override.
+[ 0.000000] Using ACPI (MADT) for SMP configuration information
+[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
+[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
+[ 0.000000] nr_irqs_gsi: 40
+[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
+[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
+[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
+[ 0.000000] Booting paravirtualized kernel on bare hardware
+[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
+[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
+[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
+[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
+[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
+[ 0.000000] Policy zone: Normal
+[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.100:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=ttyS0,115200n8 consoleblank=0 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
+[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
+[ 0.000000] AGP: Checking aperture...
+[ 0.000000] AGP: No AGP bridge found
+[ 0.000000] AGP: Node 0: aperture [bus addr 0xa5fa000000-0xa5fbffffff] (32MB)
+[ 0.000000] Aperture beyond 4GB. Ignoring.
+[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
+[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
+[ 0.000000] AGP: This costs you 64MB of RAM
+[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
+[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
+[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
+[ 0.000000] Hierarchical RCU implementation.
+[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
+[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
+[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
+[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
+[ 0.000000] spurious 8259A interrupt: IRQ7.
+[ 0.000000] Console: colour VGA+ 80x25
+[ 0.000000] console [ttyS0] enabled
+[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
+[ 0.000000] hpet clockevent registered
+[ 0.000000] tsc: Fast TSC calibration using PIT
+[ 0.000000] tsc: Detected 1909.686 MHz processor
+[ 0.000162] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.37 BogoMIPS (lpj=7638744)
+[ 0.010795] pid_max: default: 32768 minimum: 301
+[ 0.015451] ACPI: Core revision 20140424
+[ 0.021802] ACPI: All ACPI Tables successfully acquired
+[ 0.027154] Security Framework initialized
+[ 0.031281] AppArmor: AppArmor disabled by boot time parameter
+[ 0.037116] Yama: disabled by default; enable with sysctl kernel.yama.*
+[ 0.044881] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
+[ 0.058125] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[ 0.067909] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[ 0.074809] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[ 0.082669] Initializing cgroup subsys memory
+[ 0.087046] Initializing cgroup subsys devices
+[ 0.091517] Initializing cgroup subsys freezer
+[ 0.095973] Initializing cgroup subsys net_cls
+[ 0.100436] Initializing cgroup subsys blkio
+[ 0.104723] Initializing cgroup subsys perf_event
+[ 0.109433] Initializing cgroup subsys net_prio
+[ 0.114013] tseg: 0000000000
+[ 0.114026] CPU: Physical Processor ID: 0
+[ 0.118045] CPU: Processor Core ID: 0
+[ 0.121732] mce: CPU supports 6 MCE banks
+[ 0.125762] LVT offset 0 assigned for vector 0xf9
+[ 0.130491] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
+Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
+tlb_flushall_shift: 6
+[ 0.145832] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
+[ 0.154847] ftrace: allocating 21601 entries in 85 pages
+[ 0.170250] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
+[ 0.215768] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
+[ 0.332519] Performance Events: AMD PMU driver.
+[ 0.337089] ... version: 0
+[ 0.341103] ... bit width: 48
+[ 0.345201] ... generic registers: 4
+[ 0.349211] ... value mask: 0000ffffffffffff
+[ 0.354523] ... max period: 00007fffffffffff
+[ 0.359823] ... fixed-purpose events: 0
+[ 0.363853] ... event mask: 000000000000000f
+[ 0.371765] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
+[ 0.379970] x86: Booting SMP configuration:
+[ 0.384163] .... node #0, CPUs: #1 #2 #3
+[ 0.428513] .... node #1, CPUs: #4 #5 #6 #7
+[ 0.581117] x86: Booted up 2 nodes, 8 CPUs
+[ 0.585420] smpboot: Total of 8 processors activated (30556.71 BogoMIPS)
+[ 0.598003] devtmpfs: initialized
+[ 0.609922] pinctrl core: initialized pinctrl subsystem
+[ 0.615321] NET: Registered protocol family 16
+[ 0.619985] cpuidle: using governor ladder
+[ 0.624088] cpuidle: using governor menu
+[ 0.628026] node 0 link 1: io port [1000, 3fff]
+[ 0.628029] TOM: 00000000c0000000 aka 3072M
+[ 0.632221] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
+[ 0.632226] node 0 link 1: mmio [fc000000, fc3fffff]
+[ 0.632229] node 0 link 1: mmio [f8000000, fbffffff]
+[ 0.632231] TOM2: 0000000180000000 aka 6144M
+[ 0.636510] bus: [bus 00-05] on node 0 link 1
+[ 0.636512] bus: 00 [io 0x0000-0xffff]
+[ 0.636514] bus: 00 [mem 0xd0000000-0xffffffff]
+[ 0.636516] bus: 00 [mem 0x180000000-0xfcffffffff]
+[ 0.636622] ACPI: bus type PCI registered
+[ 0.640642] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+[ 0.647248] PCI: Using configuration type 1 for base access
+[ 0.652823] PCI: Using configuration type 1 for extended access
+[ 0.659370] mtrr: your CPUs had inconsistent variable MTRR settings
+[ 0.665638] mtrr: probably your BIOS does not setup all CPUs.
+[ 0.671389] mtrr: corrected configuration.
+[ 0.685306] ACPI: Added _OSI(Module Device)
+[ 0.689499] ACPI: Added _OSI(Processor Device)
+[ 0.693950] ACPI: Added _OSI(3.0 _SCP Extensions)
+[ 0.698662] ACPI: Added _OSI(Processor Aggregator Device)
+[ 0.707675] ACPI: Interpreter enabled
+[ 0.711358] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
+[ 0.720625] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
+[ 0.729878] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
+[ 0.739150] ACPI: (supports S0 S1 S5)
+[ 0.742821] ACPI: Using IOAPIC for interrupt routing
+[ 0.747830] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[ 0.776573] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
+[ 0.782758] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
+[ 0.790968] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
+[ 0.830893] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
+[ 0.840910] PCI host bridge to bus 0000:00
+[ 0.845012] pci_bus 0000:00: root bus resource [bus 00-05]
+[ 0.850502] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
+[ 0.856688] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
+[ 0.863567] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
+[ 0.870446] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
+[ 0.877324] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
+[ 0.883513] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
+[ 0.883705] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
+[ 0.883712] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
+[ 0.883842] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
+[ 0.883853] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
+[ 0.883877] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
+[ 0.883896] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
+[ 0.883922] pci 0000:00:01.1: PME# supported from D3hot D3cold
+[ 0.884026] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
+[ 0.884036] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
+[ 0.884063] pci 0000:00:02.0: supports D1 D2
+[ 0.884082] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.884145] pci 0000:00:02.0: System wakeup disabled by ACPI
+[ 0.889870] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
+[ 0.889879] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
+[ 0.889929] pci 0000:00:02.1: supports D1 D2
+[ 0.889940] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.889990] pci 0000:00:02.1: System wakeup disabled by ACPI
+[ 0.895715] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
+[ 0.895742] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
+[ 0.895786] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
+[ 0.902926] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
+[ 0.909449] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
+[ 0.916580] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
+[ 0.923213] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
+[ 0.923225] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
+[ 0.923230] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
+[ 0.923234] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
+[ 0.923239] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
+[ 0.923243] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
+[ 0.923248] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
+[ 0.923391] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
+[ 0.923401] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
+[ 0.923406] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
+[ 0.923411] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
+[ 0.923415] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
+[ 0.923420] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
+[ 0.923425] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
+[ 0.923545] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
+[ 0.923682] pci 0000:00:09.0: System wakeup disabled by ACPI
+[ 0.929405] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
+[ 0.929454] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.929504] pci 0000:00:0b.0: System wakeup disabled by ACPI
+[ 0.935225] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
+[ 0.935280] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.935334] pci 0000:00:0c.0: System wakeup disabled by ACPI
+[ 0.941056] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
+[ 0.941106] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.941158] pci 0000:00:0d.0: System wakeup disabled by ACPI
+[ 0.946876] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
+[ 0.946925] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.946980] pci 0000:00:0e.0: System wakeup disabled by ACPI
+[ 0.952705] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
+[ 0.952845] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
+[ 0.952950] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
+[ 0.953061] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
+[ 0.953202] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
+[ 0.953333] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
+[ 0.953464] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
+[ 0.953584] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
+[ 0.953706] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
+[ 0.953838] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
+[ 0.954035] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
+[ 0.954055] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
+[ 0.954064] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
+[ 0.954071] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
+[ 0.954119] pci 0000:01:04.0: supports D1 D2
+[ 0.954219] pci 0000:00:09.0: PCI bridge to [bus 01]
+[ 0.959199] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
+[ 0.959202] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
+[ 0.959205] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
+[ 0.959339] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
+[ 0.959377] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
+[ 0.959413] pci 0000:02:00.0: reg 0x30: [mem 0x21400000-0x2140ffff pref]
+[ 0.959482] pci 0000:02:00.0: PME# supported from D3hot D3cold
+[ 0.959562] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
+[ 0.969565] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[ 0.974534] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
+[ 0.974641] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
+[ 0.974673] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
+[ 0.974775] pci 0000:03:00.0: PME# supported from D3hot D3cold
+[ 0.974877] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
+[ 0.984875] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[ 0.989842] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
+[ 0.989918] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[ 0.994965] pci 0000:00:0e.0: PCI bridge to [bus 05]
+[ 0.999953] pci_bus 0000:00: on NUMA node 0
+[ 1.000051] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
+[ 1.006209] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
+[ 1.012349] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
+[ 1.019657] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
+[ 1.026973] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
+[ 1.034304] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
+[ 1.041610] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
+[ 1.047745] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
+[ 1.053876] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
+[ 1.061179] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
+[ 1.068483] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
+[ 1.075793] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
+[ 1.081947] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
+[ 1.088088] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
+[ 1.095406] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
+[ 1.102711] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
+[ 1.110024] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
+[ 1.118568] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
+[ 1.125041] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
+[ 1.131504] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
+[ 1.137973] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
+[ 1.144699] ACPI: Enabled 1 GPEs in block 00 to 1F
+[ 1.149814] vgaarb: setting as boot device: PCI:0000:01:04.0
+[ 1.155480] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
+[ 1.163576] vgaarb: loaded
+[ 1.166291] vgaarb: bridge control possible 0000:01:04.0
+[ 1.171770] PCI: Using ACPI for IRQ routing
+[ 1.175966] PCI: pci_cache_line_size set to 64 bytes
+[ 1.176025] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
+[ 1.176028] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
+[ 1.176349] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
+[ 1.183398] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
+[ 1.188461] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
+[ 1.197146] Switched to clocksource hpet
+[ 1.212701] pnp: PnP ACPI init
+[ 1.215816] ACPI: bus type PNP registered
+[ 1.220381] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
+[ 1.220461] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
+[ 1.220559] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
+[ 1.220637] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
+[ 1.220678] pnp 00:04: [dma 2]
+[ 1.220721] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
+[ 1.220742] pnp: PnP ACPI: found 5 devices
+[ 1.224846] ACPI: bus type PNP unregistered
+[ 1.236877] pci 0000:02:00.0: can't claim BAR 6 [mem 0x21400000-0x2140ffff pref]: no compatible bridge window
+[ 1.246831] pci 0000:00:09.0: PCI bridge to [bus 01]
+[ 1.251806] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
+[ 1.257908] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
+[ 1.264697] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
+[ 1.271930] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
+[ 1.279159] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[ 1.284130] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
+[ 1.290925] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[ 1.295895] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
+[ 1.302688] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[ 1.307664] pci 0000:00:0e.0: PCI bridge to [bus 05]
+[ 1.312636] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
+[ 1.312638] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
+[ 1.312641] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
+[ 1.312644] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
+[ 1.312647] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
+[ 1.312650] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
+[ 1.312652] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
+[ 1.312655] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
+[ 1.312657] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
+[ 1.312660] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
+[ 1.312797] NET: Registered protocol family 2
+[ 1.317658] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
+[ 1.325353] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
+[ 1.332693] TCP: Hash tables configured (established 65536 bind 65536)
+[ 1.339303] TCP: reno registered
+[ 1.342559] UDP hash table entries: 4096 (order: 5, 131072 bytes)
+[ 1.348764] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
+[ 1.355557] NET: Registered protocol family 1
+[ 1.360300] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
+[ 1.366382] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
+[ 1.372290] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.377827] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.383335] pci 0000:00:0b.0: Found disabled HT MSI Mapping
+[ 1.388923] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.394464] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.399970] pci 0000:00:0c.0: Found disabled HT MSI Mapping
+[ 1.405557] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.411095] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.416600] pci 0000:00:0d.0: Found disabled HT MSI Mapping
+[ 1.422184] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.427744] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.433243] pci 0000:00:0e.0: Found disabled HT MSI Mapping
+[ 1.438814] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.444344] pci 0000:01:04.0: Video device with shadowed ROM
+[ 1.444352] PCI: CLS 64 bytes, default 64
+[ 1.444460] Unpacking initramfs...
+[ 1.677659] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
+[ 1.685543] PCI-DMA: Disabling AGP.
+[ 1.690615] PCI-DMA: aperture base @ b4000000 size 65536 KB
+[ 1.696195] PCI-DMA: using GART IOMMU.
+[ 1.699959] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
+[ 1.711996] platform rtc_cmos: registered platform RTC device (no PNP device found)
+[ 1.720181] microcode: CPU0: patch_level=0x00000000
+[ 1.725072] microcode: CPU1: patch_level=0x00000000
+[ 1.729966] microcode: CPU2: patch_level=0x00000000
+[ 1.734868] microcode: CPU3: patch_level=0x00000000
+[ 1.739773] microcode: CPU4: patch_level=0x00000000
+[ 1.744662] microcode: CPU5: patch_level=0x00000000
+[ 1.749555] microcode: CPU6: patch_level=0x00000000
+[ 1.754452] microcode: CPU7: patch_level=0x00000000
+[ 1.759438] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
+[ 1.768236] LVT offset 1 assigned for vector 0x400
+[ 1.773050] IBS: LVT offset 1 assigned
+[ 1.776830] perf: AMD IBS detected (0x00000007)
+[ 1.781983] futex hash table entries: 2048 (order: 5, 131072 bytes)
+[ 1.788369] audit: initializing netlink subsys (disabled)
+[ 1.793794] audit: type=2000 audit(1446070732.520:1): initialized
+[ 1.800675] HugeTLB registered 2 MB page size, pre-allocated 0 pages
+[ 1.807080] zbud: loaded
+[ 1.809975] VFS: Disk quotas dquot_6.5.2
+[ 1.813946] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[ 1.820497] msgmni has been set to 9945
+[ 1.824882] alg: No test for stdrng (krng)
+[ 1.829048] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
+[ 1.836545] io scheduler noop registered
+[ 1.840479] io scheduler deadline registered
+[ 1.844840] io scheduler cfq registered (default)
+[ 1.849766] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
+[ 1.849891] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
+[ 1.850017] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
+[ 1.850141] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
+[ 1.850302] aer 0000:00:0b.0:pcie02: service driver aer loaded
+[ 1.850331] aer 0000:00:0c.0:pcie02: service driver aer loaded
+[ 1.850356] aer 0000:00:0d.0:pcie02: service driver aer loaded
+[ 1.850383] aer 0000:00:0e.0:pcie02: service driver aer loaded
+[ 1.850402] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
+[ 1.857377] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
+[ 1.863912] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
+[ 1.863923] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
+[ 1.870885] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
+[ 1.877418] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
+[ 1.877429] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
+[ 1.884393] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
+[ 1.884403] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
+[ 1.891366] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
+[ 1.891398] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+[ 1.897005] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
+[ 1.903742] GHES: HEST is not enabled!
+[ 1.907627] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+[ 1.934215] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
+[ 1.961899] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
+[ 1.969826] Linux agpgart interface v0.103
+[ 1.974142] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
+[ 1.984493] serio: i8042 KBD port at 0x60,0x64 irq 1
+[ 1.989481] serio: i8042 AUX port at 0x60,0x64 irq 12
+[ 1.994768] mousedev: PS/2 mouse device common for all mice
+[ 2.000442] rtc_cmos rtc_cmos: RTC can wake from S4
+[ 2.005562] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
+[ 2.011961] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
+[ 2.019832] ledtrig-cpu: registered to indicate activity on CPUs
+[ 2.026104] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
+[ 2.032553] AMD IOMMUv2 functionality not available on this system
+[ 2.038919] TCP: cubic registered
+[ 2.042365] NET: Registered protocol family 10
+[ 2.047188] mip6: Mobile IPv6
+[ 2.048558] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
+[ 2.058781] NET: Registered protocol family 17
+[ 2.063241] mpls_gso: MPLS GSO support
+[ 2.067845] registered taskstats version 1
+[ 2.072711] rtc_cmos rtc_cmos: setting system clock to 2015-10-28 22:18:54 UTC (1446070734)
+[ 2.081137] PM: Hibernation image not present or could not be loaded.
+[ 2.082933] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
+[ 2.090791] Write protecting the kernel read-only data: 8192k
+[ 2.100011] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
+[ 2.108608] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
+[ 2.132552] systemd-udevd[99]: starting version 215
+[ 2.138315] random: systemd-udevd urandom read with 3 bits of entropy available
+[ 2.169700] pps_core: LinuxPPS API ver. 1 registered
+[ 2.174726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+[ 2.184229] ACPI: bus type USB registered
+[ 2.188446] usbcore: registered new interface driver usbfs
+[ 2.188498] PTP clock support registered
+[ 2.197974] usbcore: registered new interface driver hub
+[ 2.203525] usbcore: registered new device driver usb
+[ 2.203616] tg3.c:v3.137 (May 11, 2014)
+[ 2.203630] tg3 0000:02:00.0: enabling device (0004 -> 0006)
+[ 2.203838] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
+[ 2.224833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[ 2.231915] ehci-pci: EHCI PCI platform driver
+[ 2.236686] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[ 2.236709] ehci-pci 0000:00:02.1: EHCI Host Controller
+[ 2.236725] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
+[ 2.236746] ehci-pci 0000:00:02.1: debug port 1
+[ 2.236807] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
+[ 2.236835] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
+[ 2.248849] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
+[ 2.248941] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+[ 2.248943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 2.248944] usb usb1: Product: EHCI Host Controller
+[ 2.248946] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
+[ 2.248947] usb usb1: SerialNumber: 0000:00:02.1
+[ 2.249259] hub 1-0:1.0: USB hub found
+[ 2.249270] hub 1-0:1.0: 10 ports detected
+[ 2.309677] ohci-pci: OHCI PCI platform driver
+[ 2.314408] ohci-pci 0000:00:02.0: OHCI PCI host controller
+[ 2.319999] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
+[ 2.327451] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
+[ 2.347921] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
+[ 2.358188] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[ 2.367930] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 2.375765] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 2.382568] tg3 0000:03:00.0: enabling device (0004 -> 0006)
+[ 2.388391] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
+[ 2.390817] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+[ 2.390819] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 2.390820] usb usb2: Product: OHCI PCI host controller
+[ 2.390821] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
+[ 2.390823] usb usb2: SerialNumber: 0000:00:02.0
+[ 2.391034] hub 2-0:1.0: USB hub found
+[ 2.391045] hub 2-0:1.0: 10 ports detected
+[ 2.477284] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
+[ 2.487542] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[ 2.497278] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 2.505108] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 2.518343] FS-Cache: Loaded
+[ 2.525374] RPC: Registered named UNIX socket transport module.
+[ 2.531963] RPC: Registered udp transport module.
+[ 2.538058] RPC: Registered tcp transport module.
+[ 2.544147] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[ 2.556631] FS-Cache: Netfs 'nfs' registered for caching
+[ 2.570331] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
+[ 2.616786] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+[ 2.708642] tsc: Refined TSC clocksource calibration: 1909.787 MHz
+[ 3.712376] Switched to clocksource tsc
+[ 4.379206] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
+[ 4.385736] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
+[ 4.392622] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[ 5.074991] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
+[ 5.088778] systemd[1]: Detected architecture 'x86-64'.
+[ 5.311505] systemd[1]: Inserted module 'autofs4'
+[ 5.317544] systemd[1]: Set hostname to <cb-test-tgt>.
+[ 5.401031] random: nonblocking pool is initialized
+[ 5.558600] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
+[ 5.571323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
+[ 5.586726] systemd[1]: Expecting device dev-ttyS0.device...
+[ 5.599779] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
+[ 5.607556] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+[ 5.615159] systemd[1]: Starting Remote File Systems (Pre).
+[ 5.631693] systemd[1]: Reached target Remote File Systems (Pre).
+[ 5.637815] systemd[1]: Starting Encrypted Volumes.
+[ 5.651665] systemd[1]: Reached target Encrypted Volumes.
+[ 5.657133] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
+[ 5.679657] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
+[ 5.689085] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
+[ 5.697148] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+[ 5.705075] systemd[1]: Starting Paths.
+[ 5.719641] systemd[1]: Reached target Paths.
+[ 5.724038] systemd[1]: Starting Swap.
+[ 5.735629] systemd[1]: Reached target Swap.
+[ 5.739924] systemd[1]: Starting Root Slice.
+[ 5.751621] systemd[1]: Created slice Root Slice.
+[ 5.756351] systemd[1]: Starting User and Session Slice.
+[ 5.771689] systemd[1]: Created slice User and Session Slice.
+[ 5.777508] systemd[1]: Starting Delayed Shutdown Socket.
+[ 5.791613] systemd[1]: Listening on Delayed Shutdown Socket.
+[ 5.797386] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
+[ 5.815629] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+[ 5.822613] systemd[1]: Starting Journal Socket (/dev/log).
+[ 5.839602] systemd[1]: Listening on Journal Socket (/dev/log).
+[ 5.845568] systemd[1]: Starting udev Kernel Socket.
+[ 5.859680] systemd[1]: Listening on udev Kernel Socket.
+[ 5.865077] systemd[1]: Starting udev Control Socket.
+[ 5.879580] systemd[1]: Listening on udev Control Socket.
+[ 5.885033] systemd[1]: Starting Journal Socket.
+[ 5.899568] systemd[1]: Listening on Journal Socket.
+[ 5.904588] systemd[1]: Starting System Slice.
+[ 5.919559] systemd[1]: Created slice System Slice.
+[ 5.924464] systemd[1]: Starting system-getty.slice.
+[ 5.939567] systemd[1]: Created slice system-getty.slice.
+[ 5.944993] systemd[1]: Starting system-serial\x2dgetty.slice.
+[ 5.959559] systemd[1]: Created slice system-serial\x2dgetty.slice.
+[ 5.965879] systemd[1]: Starting Increase datagram queue length...
+[ 5.984410] systemd[1]: Starting udev Coldplug all Devices...
+[ 6.206714] systemd[1]: Starting Load Kernel Modules...
+[ 6.235265] systemd[1]: Started Set Up Additional Binary Formats.
+[ 6.241611] systemd[1]: Mounting Debug File System...
+[ 6.257415] systemd[1]: Starting Create list of required static device nodes for the current kernel...
+[ 6.281322] systemd[1]: Mounting POSIX Message Queue File System...
+[ 6.300603] systemd[1]: Mounting Huge Pages File System...
+[ 6.316415] systemd[1]: Starting Slices.
+[ 6.327522] systemd[1]: Reached target Slices.
+[ 6.332122] systemd[1]: Starting Remount Root and Kernel File Systems...
+[ 6.359434] systemd[1]: Mounted Huge Pages File System.
+[ 6.375412] systemd[1]: Mounted POSIX Message Queue File System.
+[ 6.391467] systemd[1]: Mounted Debug File System.
+[ 6.407463] systemd[1]: Started Increase datagram queue length.
+[ 6.423429] systemd[1]: Started Load Kernel Modules.
+[ 6.443438] systemd[1]: Started Create list of required static device nodes for the current kernel.
+[ 6.463463] systemd[1]: Started Remount Root and Kernel File Systems.
+[ 6.479401] systemd[1]: Started udev Coldplug all Devices.
+[ 6.525124] systemd[1]: Started Various fixups to make systemd work better on Debian.
+[ 6.532998] systemd[1]: Starting Load/Save Random Seed...
+[ 6.548345] systemd[1]: Starting Create Static Device Nodes in /dev...
+[ 6.564335] systemd[1]: Starting Apply Kernel Variables...
+[ 6.580366] systemd[1]: Mounted Configuration File System.
+[ 6.585956] systemd[1]: Mounted FUSE Control File System.
+[ 6.591409] systemd[1]: Starting Syslog Socket.
+[ 6.603393] systemd[1]: Listening on Syslog Socket.
+[ 6.608390] systemd[1]: Starting Sockets.
+[ 6.623359] systemd[1]: Reached target Sockets.
+[ 6.627955] systemd[1]: Starting Journal Service...
+[ 6.651387] systemd[1]: Started Journal Service.
+[ 6.789167] systemd-udevd[192]: starting version 215
+[ 7.055942] systemd-journald[190]: Received request to flush runtime journal from PID 1
+[ 7.497392] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+[ 7.507349] EDAC MC: Ver: 3.0.0
+[ 7.511120] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
+[ 7.519016] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
+[ 7.565009] SCSI subsystem initialized
+[ 7.637346] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
+[ 7.646341] ACPI: Power Button [PWRB]
+[ 7.651146] FDC 0 is a post-1991 82077
+[ 7.655368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
+[ 7.664004] ACPI: Power Button [PWRF]
+[ 7.670073] libata version 3.00 loaded.
+[ 7.670165] MCE: In-kernel MCE decoding enabled.
+[ 7.675576] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
+[ 7.681154] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
+[ 7.686953] acpi-cpufreq: overriding BIOS provided _PSD data
+[ 7.693539] AMD64 EDAC driver v3.4.0
+[ 7.697988] sata_nv 0000:00:07.0: version 3.5
+[ 7.698271] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
+[ 7.705475] input: PC Speaker as /devices/platform/pcspkr/input/input4
+[ 7.705530] scsi0 : sata_nv
+[ 7.716383] scsi1 : sata_nv
+[ 7.719787] ata1: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
+[ 7.727020] ata2: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
+[ 7.734699] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
+[ 7.741108] scsi2 : sata_nv
+[ 7.744203] scsi3 : sata_nv
+[ 7.747079] ata3: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
+[ 7.754211] ata4: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
+[ 7.761455] EDAC amd64: DRAM ECC enabled.
+[ 7.765515] EDAC amd64: F10h detected (node 0).
+[ 7.770098] EDAC MC: DCT0 chip selects:
+[ 7.770101] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 7.774816] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.779524] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.784238] EDAC amd64: MC: 6: 1024MB 7: 1024MB
+[ 7.788979] EDAC MC: DCT1 chip selects:
+[ 7.788981] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 7.793721] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.798467] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.803205] EDAC amd64: MC: 6: 1024MB 7: 1024MB
+[ 7.807939] EDAC amd64: using x4 syndromes.
+[ 7.812171] EDAC amd64: MCT channel count: 2
+[ 7.816562] EDAC amd64: CS6: Registered DDR2 RAM
+[ 7.821190] EDAC amd64: CS7: Registered DDR2 RAM
+[ 7.826105] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
+[ 7.835894] pata_amd 0000:00:06.0: version 0.4.1
+[ 7.837055] scsi4 : pata_amd
+[ 7.837134] kvm: Nested Virtualization enabled
+[ 7.837142] kvm: Nested Paging enabled
+[ 7.850244] scsi5 : pata_amd
+[ 7.854327] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
+[ 7.861304] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
+[ 7.868376] EDAC amd64: DRAM ECC enabled.
+[ 7.872444] EDAC amd64: F10h detected (node 1).
+[ 7.877037] EDAC MC: DCT0 chip selects:
+[ 7.877041] EDAC amd64: MC: 0: 1024MB 1: 0MB
+[ 7.881762] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.886472] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.891179] EDAC amd64: MC: 6: 0MB 7: 0MB
+[ 7.895882] EDAC MC: DCT1 chip selects:
+[ 7.895885] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 7.900595] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 7.905308] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 7.910017] EDAC amd64: MC: 6: 0MB 7: 0MB
+[ 7.914722] EDAC amd64: using x4 syndromes.
+[ 7.918910] EDAC amd64: MCT channel count: 1
+[ 7.923232] EDAC amd64: CS0: Registered DDR2 RAM
+[ 7.928085] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
+[ 7.937942] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
+[ 8.042816] ata1: SATA link down (SStatus 0 SControl 300)
+[ 8.070806] ata3: SATA link down (SStatus 0 SControl 300)
+[ 8.358709] ata2: SATA link down (SStatus 0 SControl 300)
+[ 8.674600] ata4: SATA link down (SStatus 0 SControl 300)
+[ 38.630836] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
+[ 300.942655] [Hardware Error]: Corrected error, no action required.
+[ 300.948871] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[-|CE|MiscV|-|AddrV|CECC]: 0x9c224100da080a13
+[ 300.958074] [Hardware Error]: MC4_ADDR: 0x00000000bdde3800
+[ 300.963578] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
+[ 300.971394] EDAC MC1: 1 CE Failed to map error addr to a csrow on mc#1csrow#0channel#0 (channel:0 page:0xbdde3 offset:0x800 grain:0 syndrome:0xda44)
+[ 300.984694] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)