Revert "lenovo/t400/4.5-1564-g6fa36c9c2c-dirty/2017-04-16T13_28_27Z"
This reverts commit e5454d36ca2f96e452a228db9a1485bff2e8f32e.
The commit in question deletes a lot of unrelated files, and needs to be
reverted.
diff --git a/asus/kfsn4-dre/4.1-390-g5c25d0e/2015-08-28T06:46:28Z/kernel_log.txt b/asus/kfsn4-dre/4.1-390-g5c25d0e/2015-08-28T06:46:28Z/kernel_log.txt
new file mode 100644
index 0000000..3d68522
--- /dev/null
+++ b/asus/kfsn4-dre/4.1-390-g5c25d0e/2015-08-28T06:46:28Z/kernel_log.txt
@@ -0,0 +1,740 @@
+[ 0.000000] Initializing cgroup subsys cpuset
+[ 0.000000] Initializing cgroup subsys cpu
+[ 0.000000] Initializing cgroup subsys cpuacct
+[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
+[ 0.000000] Command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
+[ 0.000000] e820: BIOS-provided physical RAM map:
+[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
+[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9afff] usable
+[ 0.000000] BIOS-e820: [mem 0x00000000bff9b000-0x00000000cfffffff] reserved
+[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
+[ 0.000000] NX (Execute Disable) protection: active
+[ 0.000000] SMBIOS 2.7 present.
+[ 0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.1-390-g5c25d0e-dirty 08/28/2015
+[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
+[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
+[ 0.000000] AGP: No AGP bridge found
+[ 0.000000] e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
+[ 0.000000] MTRR default type: uncachable
+[ 0.000000] MTRR fixed ranges enabled:
+[ 0.000000] 00000-9FFFF write-back
+[ 0.000000] A0000-BFFFF uncachable
+[ 0.000000] C0000-FFFFF write-back
+[ 0.000000] MTRR variable ranges enabled:
+[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
+[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
+[ 0.000000] 2 base 0000F8000000 mask FFFFFC000000 write-combining
+[ 0.000000] 3 disabled
+[ 0.000000] 4 disabled
+[ 0.000000] 5 disabled
+[ 0.000000] 6 disabled
+[ 0.000000] 7 disabled
+[ 0.000000] TOM2: 0000000180000000 aka 6144M
+[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+[ 0.000000] e820: last_pfn = 0xbff9b max_arch_pfn = 0x400000000
+[ 0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
+[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
+[ 0.000000] Using GB pages for direct mapping
+[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
+[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
+[ 0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
+[ 0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
+[ 0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
+[ 0.000000] init_memory_mapping: [mem 0x17fe00000-0x17fffffff]
+[ 0.000000] [mem 0x17fe00000-0x17fffffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x17c000000-0x17fdfffff]
+[ 0.000000] [mem 0x17c000000-0x17fdfffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x100000000-0x17bffffff]
+[ 0.000000] [mem 0x100000000-0x17bffffff] page 1G
+[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9afff]
+[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
+[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
+[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
+[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
+[ 0.000000] [mem 0xbfe00000-0xbff9afff] page 4k
+[ 0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
+[ 0.000000] ACPI: Early table checksum verification disabled
+[ 0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE )
+[ 0.000000] ACPI: XSDT 0x00000000BFFB40E0 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: FACP 0x00000000BFFB68D0 000074 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: DSDT 0x00000000BFFB4280 002644 (v02 ASUS COREBOOT 00000001 INTL 20150204)
+[ 0.000000] ACPI: FACS 0x00000000BFFB4240 000040
+[ 0.000000] ACPI: SSDT 0x00000000BFFB69D0 000E57 (v02 CORE COREBOOT 0000002A CORE 0000002A)
+[ 0.000000] ACPI: TCPA 0x00000000BFFB7830 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: APIC 0x00000000BFFB7870 0000C6 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SRAT 0x00000000BFFB7940 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SLIT 0x00000000BFFB7AB8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: HPET 0x00000000BFFB7AF0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SRAT 0x00000000BFFB7B30 000178 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: SLIT 0x00000000BFFB7CA8 000030 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
+[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
+[ 0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
+[ 0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
+[ 0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xbfffffff]
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
+[ 0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x13fffffff]
+[ 0.000000] SRAT: Node 1 PXM 1 [mem 0x140000000-0x17fffffff]
+[ 0.000000] NUMA: Initialized distance table, cnt=3
+[ 0.000000] NUMA: node 2 [mem 0x00100000-0xbfffffff] overlaps with node 0 [mem 0x00100000-0xbfffffff]
+[ 0.000000] Scanning NUMA topology in Northbridge 24
+[ 0.000000] Number of physical nodes 2
+[ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000140000000
+[ 0.000000] Node 1 MemBase 0000000140000000 Limit 0000000180000000
+[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
+[ 0.000000] NODE_DATA [mem 0x13fffb000-0x13fffffff]
+[ 0.000000] Initmem setup node 1 [mem 0x140000000-0x17fffffff]
+[ 0.000000] NODE_DATA [mem 0x17fff9000-0x17fffdfff]
+[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013be00000-ffff88013f5fffff] on node 0
+[ 0.000000] [ffffea0004600000-ffffea00053fffff] PMD -> [ffff88017e600000-ffff88017f3fffff] on node 1
+[ 0.000000] Zone ranges:
+[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
+[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
+[ 0.000000] Normal [mem 0x100000000-0x17fffffff]
+[ 0.000000] Movable zone start for each node
+[ 0.000000] Early memory node ranges
+[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
+[ 0.000000] node 0: [mem 0x00100000-0xbff9afff]
+[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
+[ 0.000000] node 1: [mem 0x140000000-0x17fffffff]
+[ 0.000000] On node 0 totalpages: 1048377
+[ 0.000000] DMA zone: 56 pages used for memmap
+[ 0.000000] DMA zone: 21 pages reserved
+[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
+[ 0.000000] DMA32 zone: 10695 pages used for memmap
+[ 0.000000] DMA32 zone: 782235 pages, LIFO batch:31
+[ 0.000000] Normal zone: 3584 pages used for memmap
+[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
+[ 0.000000] On node 1 totalpages: 262144
+[ 0.000000] Normal zone: 3584 pages used for memmap
+[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
+[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
+[ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
+[ 0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
+[ 0.000000] ACPI: IRQ9 used by override.
+[ 0.000000] ACPI: IRQ14 used by override.
+[ 0.000000] ACPI: IRQ15 used by override.
+[ 0.000000] Using ACPI (MADT) for SMP configuration information
+[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
+[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
+[ 0.000000] nr_irqs_gsi: 40
+[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
+[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0xbff9b000-0xcfffffff]
+[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xffffffff]
+[ 0.000000] e820: [mem 0xd0000000-0xffffffff] available for PCI devices
+[ 0.000000] Booting paravirtualized kernel on bare hardware
+[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
+[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80896 r8192 d21504 u524288
+[ 0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
+[ 0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7
+[ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 1292581
+[ 0.000000] Policy zone: Normal
+[ 0.000000] Kernel command line: root=/dev/nfs initrd=initrd-cb-test-tgt rootfstype=nfs nfsroot=10.100.1.1:/nfsroots/cb-test-tgt-01,v3,hard,nointr,tcp ip=10.100.1.10::10.100.1.1:255.255.255.0:embed-o-matic:eth0:off console=tty0 console=ttyS0,115200n8 rw BOOT_IMAGE=vmlinuz-cb-test-tgt
+[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
+[ 0.000000] AGP: Checking aperture...
+[ 0.000000] AGP: No AGP bridge found
+[ 0.000000] AGP: Node 0: aperture [bus addr 0xe5fa000000-0xe5fbffffff] (32MB)
+[ 0.000000] Aperture beyond 4GB. Ignoring.
+[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
+[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
+[ 0.000000] AGP: This costs you 64MB of RAM
+[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
+[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
+[ 0.000000] Memory: 5017492K/5242084K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 224592K reserved)
+[ 0.000000] Hierarchical RCU implementation.
+[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
+[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
+[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
+[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
+[ 0.000000] spurious 8259A interrupt: IRQ7.
+[ 0.000000] Console: colour VGA+ 80x25
+[ 0.000000] console [tty0] enabled
+[ 0.000000] console [ttyS0] enabled
+[ 0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
+[ 0.000000] hpet clockevent registered
+[ 0.000000] tsc: Fast TSC calibration using PIT
+[ 0.000000] tsc: Detected 1909.870 MHz processor
+[ 0.000158] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.74 BogoMIPS (lpj=7639480)
+[ 0.010954] pid_max: default: 32768 minimum: 301
+[ 0.015676] ACPI: Core revision 20140424
+[ 0.022076] ACPI: All ACPI Tables successfully acquired
+[ 0.027583] Security Framework initialized
+[ 0.031762] AppArmor: AppArmor disabled by boot time parameter
+[ 0.037673] Yama: disabled by default; enable with sysctl kernel.yama.*
+[ 0.045488] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
+[ 0.058777] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[ 0.068603] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[ 0.075616] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
+[ 0.083572] Initializing cgroup subsys memory
+[ 0.088052] Initializing cgroup subsys devices
+[ 0.092605] Initializing cgroup subsys freezer
+[ 0.097130] Initializing cgroup subsys net_cls
+[ 0.101674] Initializing cgroup subsys blkio
+[ 0.106030] Initializing cgroup subsys perf_event
+[ 0.110827] Initializing cgroup subsys net_prio
+[ 0.115492] tseg: 0000000000
+[ 0.115506] CPU: Physical Processor ID: 0
+[ 0.119626] CPU: Processor Core ID: 0
+[ 0.124427] mce: CPU supports 6 MCE banks
+[ 0.128567] LVT offset 0 assigned for vector 0xf9
+[ 0.133368] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
+Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
+tlb_flushall_shift: 6
+[ 0.148844] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
+[ 0.157981] ftrace: allocating 21601 entries in 85 pages
+[ 0.173422] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
+[ 0.219067] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
+[ 0.336310] Performance Events: AMD PMU driver.
+[ 0.341022] ... version: 0
+[ 0.345111] ... bit width: 48
+[ 0.349304] ... generic registers: 4
+[ 0.353402] ... value mask: 0000ffffffffffff
+[ 0.358805] ... max period: 00007fffffffffff
+[ 0.364192] ... fixed-purpose events: 0
+[ 0.368294] ... event mask: 000000000000000f
+[ 0.376322] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
+[ 0.384652] x86: Booting SMP configuration:
+[ 0.388929] .... node #0, CPUs: #1 #2 #3
+[ 0.433503] .... node #1, CPUs: #4 #5 #6 #7
+[ 0.585064] x86: Booted up 2 nodes, 8 CPUs
+[ 0.589500] smpboot: Total of 8 processors activated (30558.16 BogoMIPS)
+[ 0.602082] devtmpfs: initialized
+[ 0.614101] pinctrl core: initialized pinctrl subsystem
+[ 0.619572] NET: Registered protocol family 16
+[ 0.624312] cpuidle: using governor ladder
+[ 0.628486] cpuidle: using governor menu
+[ 0.632494] node 0 link 1: io port [1000, 3fff]
+[ 0.632497] TOM: 00000000c0000000 aka 3072M
+[ 0.636759] Fam 10h mmconf [mem 0xc0000000-0xcfffffff]
+[ 0.636764] node 0 link 1: mmio [fc000000, fc3fffff]
+[ 0.636767] node 0 link 1: mmio [f8000000, fbffffff]
+[ 0.636769] TOM2: 0000000180000000 aka 6144M
+[ 0.641116] bus: [bus 00-05] on node 0 link 1
+[ 0.641118] bus: 00 [io 0x0000-0xffff]
+[ 0.641120] bus: 00 [mem 0xd0000000-0xffffffff]
+[ 0.641122] bus: 00 [mem 0x180000000-0xfcffffffff]
+[ 0.641227] ACPI: bus type PCI registered
+[ 0.645313] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+[ 0.651983] PCI: Using configuration type 1 for base access
+[ 0.657623] PCI: Using configuration type 1 for extended access
+[ 0.664243] mtrr: your CPUs had inconsistent variable MTRR settings
+[ 0.670591] mtrr: probably your BIOS does not setup all CPUs.
+[ 0.676416] mtrr: corrected configuration.
+[ 0.693228] ACPI: Added _OSI(Module Device)
+[ 0.697527] ACPI: Added _OSI(Processor Device)
+[ 0.702049] ACPI: Added _OSI(3.0 _SCP Extensions)
+[ 0.706823] ACPI: Added _OSI(Processor Aggregator Device)
+[ 0.715914] ACPI: Interpreter enabled
+[ 0.719671] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
+[ 0.729115] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
+[ 0.738561] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
+[ 0.748008] ACPI: (supports S0 S1 S5)
+[ 0.751771] ACPI: Using IOAPIC for interrupt routing
+[ 0.756859] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[ 0.784919] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
+[ 0.791183] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
+[ 0.799487] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
+[ 0.838474] acpi PNP0A03:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x03b0-0x03df] ignored
+[ 0.848595] PCI host bridge to bus 0000:00
+[ 0.852780] pci_bus 0000:00: root bus resource [bus 00-05]
+[ 0.858358] pci_bus 0000:00: root bus resource [io 0x0d00-0x3fff]
+[ 0.864627] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
+[ 0.871594] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
+[ 0.878561] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
+[ 0.885526] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
+[ 0.891808] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
+[ 0.891997] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
+[ 0.892004] pci 0000:00:01.0: reg 0x10: [io 0x2c00-0x2c7f]
+[ 0.892139] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
+[ 0.892148] pci 0000:00:01.1: reg 0x10: [io 0x3000-0x301f]
+[ 0.892171] pci 0000:00:01.1: reg 0x20: [io 0x2c80-0x2cbf]
+[ 0.892176] pci 0000:00:01.1: reg 0x24: [io 0x2cc0-0x2cff]
+[ 0.892200] pci 0000:00:01.1: PME# supported from D3hot D3cold
+[ 0.892297] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
+[ 0.892308] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
+[ 0.892353] pci 0000:00:02.0: supports D1 D2
+[ 0.892362] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.892420] pci 0000:00:02.0: System wakeup disabled by ACPI
+[ 0.898237] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
+[ 0.898251] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
+[ 0.898292] pci 0000:00:02.1: supports D1 D2
+[ 0.898295] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.898346] pci 0000:00:02.1: System wakeup disabled by ACPI
+[ 0.904161] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
+[ 0.904189] pci 0000:00:06.0: reg 0x20: [io 0x3020-0x302f]
+[ 0.904209] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
+[ 0.911422] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
+[ 0.918040] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
+[ 0.925266] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
+[ 0.931984] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
+[ 0.931992] pci 0000:00:07.0: reg 0x10: [io 0x3050-0x3057]
+[ 0.931999] pci 0000:00:07.0: reg 0x14: [io 0x3070-0x3073]
+[ 0.932004] pci 0000:00:07.0: reg 0x18: [io 0x3058-0x305f]
+[ 0.932009] pci 0000:00:07.0: reg 0x1c: [io 0x3074-0x3077]
+[ 0.932013] pci 0000:00:07.0: reg 0x20: [io 0x3030-0x303f]
+[ 0.932018] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
+[ 0.932145] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
+[ 0.932154] pci 0000:00:08.0: reg 0x10: [io 0x3060-0x3067]
+[ 0.932159] pci 0000:00:08.0: reg 0x14: [io 0x3078-0x307b]
+[ 0.932163] pci 0000:00:08.0: reg 0x18: [io 0x3068-0x306f]
+[ 0.932168] pci 0000:00:08.0: reg 0x1c: [io 0x307c-0x307f]
+[ 0.932172] pci 0000:00:08.0: reg 0x20: [io 0x3040-0x304f]
+[ 0.932177] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
+[ 0.932288] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
+[ 0.932386] pci 0000:00:09.0: System wakeup disabled by ACPI
+[ 0.938182] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
+[ 0.938231] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.938284] pci 0000:00:0b.0: System wakeup disabled by ACPI
+[ 0.944092] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
+[ 0.944156] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.944202] pci 0000:00:0c.0: System wakeup disabled by ACPI
+[ 0.950015] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
+[ 0.950055] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.950112] pci 0000:00:0d.0: System wakeup disabled by ACPI
+[ 0.955924] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
+[ 0.955965] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
+[ 0.956029] pci 0000:00:0e.0: System wakeup disabled by ACPI
+[ 0.961848] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
+[ 0.961981] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
+[ 0.962105] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
+[ 0.962217] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
+[ 0.962388] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
+[ 0.962493] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
+[ 0.962635] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
+[ 0.962787] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
+[ 0.962935] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
+[ 0.963137] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
+[ 0.963320] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
+[ 0.963336] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
+[ 0.963350] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
+[ 0.963359] pci 0000:01:04.0: reg 0x18: [io 0x1000-0x107f]
+[ 0.963395] pci 0000:01:04.0: supports D1 D2
+[ 0.963485] pci 0000:00:09.0: PCI bridge to [bus 01]
+[ 0.968538] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
+[ 0.968541] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
+[ 0.968545] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
+[ 0.968663] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
+[ 0.968694] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
+[ 0.968731] pci 0000:02:00.0: reg 0x30: [mem 0x61c00000-0x61c0ffff pref]
+[ 0.968822] pci 0000:02:00.0: PME# supported from D3hot D3cold
+[ 0.968916] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
+[ 0.979049] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[ 0.984106] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
+[ 0.984214] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
+[ 0.984249] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
+[ 0.984351] pci 0000:03:00.0: PME# supported from D3hot D3cold
+[ 0.984473] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
+[ 0.994606] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[ 0.999658] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
+[ 0.999732] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[ 1.004860] pci 0000:00:0e.0: PCI bridge to [bus 05]
+[ 1.009936] pci_bus 0000:00: on NUMA node 0
+[ 1.010037] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
+[ 1.016457] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
+[ 1.022881] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
+[ 1.030536] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
+[ 1.038207] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
+[ 1.045862] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
+[ 1.053522] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
+[ 1.059947] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
+[ 1.066372] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
+[ 1.074033] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
+[ 1.081689] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
+[ 1.089343] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
+[ 1.095746] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
+[ 1.102172] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
+[ 1.109822] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
+[ 1.117495] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
+[ 1.125153] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
+[ 1.134280] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
+[ 1.140988] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
+[ 1.147713] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
+[ 1.154429] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
+[ 1.161398] ACPI: Enabled 1 GPEs in block 00 to 1F
+[ 1.166676] vgaarb: setting as boot device: PCI:0000:01:04.0
+[ 1.172457] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
+[ 1.180659] vgaarb: loaded
+[ 1.183459] vgaarb: bridge control possible 0000:01:04.0
+[ 1.189019] PCI: Using ACPI for IRQ routing
+[ 1.193294] PCI: pci_cache_line_size set to 64 bytes
+[ 1.193352] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
+[ 1.193355] e820: reserve RAM buffer [mem 0xbff9b000-0xbfffffff]
+[ 1.193670] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
+[ 1.200796] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
+[ 1.206069] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
+[ 1.214820] Switched to clocksource hpet
+[ 1.230397] pnp: PnP ACPI init
+[ 1.233614] ACPI: bus type PNP registered
+[ 1.238246] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
+[ 1.238326] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
+[ 1.238423] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
+[ 1.238501] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
+[ 1.238542] pnp 00:04: [dma 2]
+[ 1.238583] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
+[ 1.238604] pnp: PnP ACPI: found 5 devices
+[ 1.242805] ACPI: bus type PNP unregistered
+[ 1.254907] pci 0000:02:00.0: can't claim BAR 6 [mem 0x61c00000-0x61c0ffff pref]: no compatible bridge window
+[ 1.264982] pci 0000:00:09.0: PCI bridge to [bus 01]
+[ 1.270023] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
+[ 1.276203] pci 0000:00:09.0: bridge window [mem 0xfc000000-0xfc0fffff]
+[ 1.283081] pci 0000:00:09.0: bridge window [mem 0xf8000000-0xfbffffff pref]
+[ 1.290419] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
+[ 1.297775] pci 0000:00:0b.0: PCI bridge to [bus 02]
+[ 1.302816] pci 0000:00:0b.0: bridge window [mem 0xfc100000-0xfc1fffff]
+[ 1.309686] pci 0000:00:0c.0: PCI bridge to [bus 03]
+[ 1.314720] pci 0000:00:0c.0: bridge window [mem 0xfc200000-0xfc2fffff]
+[ 1.321608] pci 0000:00:0d.0: PCI bridge to [bus 04]
+[ 1.326646] pci 0000:00:0e.0: PCI bridge to [bus 05]
+[ 1.331699] pci_bus 0000:00: resource 4 [io 0x0d00-0x3fff]
+[ 1.331701] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
+[ 1.331705] pci_bus 0000:00: resource 6 [mem 0xf8000000-0xfbffffff]
+[ 1.331707] pci_bus 0000:00: resource 7 [mem 0xfc000000-0xfc3fffff]
+[ 1.331710] pci_bus 0000:00: resource 8 [io 0x0000-0x0cf7]
+[ 1.331713] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
+[ 1.331715] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
+[ 1.331718] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
+[ 1.331721] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
+[ 1.331723] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
+[ 1.331856] NET: Registered protocol family 2
+[ 1.336823] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
+[ 1.344623] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
+[ 1.352044] TCP: Hash tables configured (established 65536 bind 65536)
+[ 1.358728] TCP: reno registered
+[ 1.362071] UDP hash table entries: 4096 (order: 5, 131072 bytes)
+[ 1.368345] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
+[ 1.375211] NET: Registered protocol family 1
+[ 1.380059] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
+[ 1.386223] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
+[ 1.392203] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.397838] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.403436] pci 0000:00:0b.0: Found disabled HT MSI Mapping
+[ 1.409100] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.414713] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.420303] pci 0000:00:0c.0: Found disabled HT MSI Mapping
+[ 1.425961] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.431567] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.437151] pci 0000:00:0d.0: Found disabled HT MSI Mapping
+[ 1.442803] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.448413] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.454001] pci 0000:00:0e.0: Found disabled HT MSI Mapping
+[ 1.459654] pci 0000:00:00.0: Found enabled HT MSI Mapping
+[ 1.465240] pci 0000:01:04.0: Video device with shadowed ROM
+[ 1.465249] PCI: CLS 64 bytes, default 64
+[ 1.465357] Unpacking initramfs...
+[ 1.698186] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
+[ 1.706122] PCI-DMA: Disabling AGP.
+[ 1.711316] PCI-DMA: aperture base @ b4000000 size 65536 KB
+[ 1.716981] PCI-DMA: using GART IOMMU.
+[ 1.720819] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
+[ 1.732930] platform rtc_cmos: registered platform RTC device (no PNP device found)
+[ 1.741286] microcode: CPU0: patch_level=0x01000096
+[ 1.746287] microcode: CPU1: patch_level=0x01000096
+[ 1.751304] microcode: CPU2: patch_level=0x01000096
+[ 1.756308] microcode: CPU3: patch_level=0x01000096
+[ 1.761322] microcode: CPU4: patch_level=0x01000096
+[ 1.766314] microcode: CPU5: patch_level=0x01000096
+[ 1.772419] microcode: CPU6: patch_level=0x01000096
+[ 1.777406] microcode: CPU7: patch_level=0x01000096
+[ 1.782484] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
+[ 1.791432] LVT offset 1 assigned for vector 0x400
+[ 1.796341] IBS: LVT offset 1 assigned
+[ 1.800209] perf: AMD IBS detected (0x00000007)
+[ 1.805443] futex hash table entries: 2048 (order: 5, 131072 bytes)
+[ 1.811933] audit: initializing netlink subsys (disabled)
+[ 1.817442] audit: type=2000 audit(1440747284.632:1): initialized
+[ 1.824399] HugeTLB registered 2 MB page size, pre-allocated 0 pages
+[ 1.830913] zbud: loaded
+[ 1.833887] VFS: Disk quotas dquot_6.5.2
+[ 1.837946] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[ 1.844586] msgmni has been set to 9945
+[ 1.849032] alg: No test for stdrng (krng)
+[ 1.853318] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
+[ 1.860964] io scheduler noop registered
+[ 1.864973] io scheduler deadline registered
+[ 1.869424] io scheduler cfq registered (default)
+[ 1.874429] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
+[ 1.874555] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
+[ 1.874688] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
+[ 1.874803] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
+[ 1.874958] aer 0000:00:0b.0:pcie02: service driver aer loaded
+[ 1.874985] aer 0000:00:0c.0:pcie02: service driver aer loaded
+[ 1.875011] aer 0000:00:0d.0:pcie02: service driver aer loaded
+[ 1.875036] aer 0000:00:0e.0:pcie02: service driver aer loaded
+[ 1.875057] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
+[ 1.882148] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
+[ 1.888747] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
+[ 1.888757] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
+[ 1.895793] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
+[ 1.902399] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
+[ 1.902410] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
+[ 1.909453] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
+[ 1.909463] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
+[ 1.916513] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
+[ 1.916542] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+[ 1.922225] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
+[ 1.929046] GHES: HEST is not enabled!
+[ 1.933013] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+[ 1.959801] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
+[ 1.987594] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
+[ 1.995631] Linux agpgart interface v0.103
+[ 2.000034] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
+[ 2.010531] serio: i8042 KBD port at 0x60,0x64 irq 1
+[ 2.015687] serio: i8042 AUX port at 0x60,0x64 irq 12
+[ 2.021049] mousedev: PS/2 mouse device common for all mice
+[ 2.026823] rtc_cmos rtc_cmos: RTC can wake from S4
+[ 2.032014] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
+[ 2.038496] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
+[ 2.046479] ledtrig-cpu: registered to indicate activity on CPUs
+[ 2.052745] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
+[ 2.059289] AMD IOMMUv2 functionality not available on this system
+[ 2.065694] TCP: cubic registered
+[ 2.069258] NET: Registered protocol family 10
+[ 2.074217] mip6: Mobile IPv6
+[ 2.077283] NET: Registered protocol family 17
+[ 2.081910] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
+[ 2.090671] mpls_gso: MPLS GSO support
+[ 2.095404] registered taskstats version 1
+[ 2.100349] rtc_cmos rtc_cmos: setting system clock to 2015-08-28 07:34:46 UTC (1440747286)
+[ 2.108918] PM: Hibernation image not present or could not be loaded.
+[ 2.110747] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
+[ 2.118725] Write protecting the kernel read-only data: 8192k
+[ 2.128037] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
+[ 2.136784] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
+[ 2.160746] systemd-udevd[99]: starting version 215
+[ 2.166619] random: systemd-udevd urandom read with 3 bits of entropy available
+[ 2.198502] pps_core: LinuxPPS API ver. 1 registered
+[ 2.203553] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
+[ 2.213205] ACPI: bus type USB registered
+[ 2.217523] usbcore: registered new interface driver usbfs
+[ 2.217576] PTP clock support registered
+[ 2.227220] usbcore: registered new interface driver hub
+[ 2.232879] usbcore: registered new device driver usb
+[ 2.232971] tg3.c:v3.137 (May 11, 2014)
+[ 2.232983] tg3 0000:02:00.0: enabling device (0004 -> 0006)
+[ 2.233190] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
+[ 2.254489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[ 2.261762] ehci-pci: EHCI PCI platform driver
+[ 2.266592] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
+[ 2.266653] ehci-pci 0000:00:02.1: EHCI Host Controller
+[ 2.266671] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
+[ 2.266693] ehci-pci 0000:00:02.1: debug port 1
+[ 2.266739] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
+[ 2.266768] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
+[ 2.278505] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
+[ 2.278592] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+[ 2.278593] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 2.278595] usb usb1: Product: EHCI Host Controller
+[ 2.278596] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
+[ 2.278597] usb usb1: SerialNumber: 0000:00:02.1
+[ 2.278819] hub 1-0:1.0: USB hub found
+[ 2.278827] hub 1-0:1.0: 10 ports detected
+[ 2.340421] ohci-pci: OHCI PCI platform driver
+[ 2.345257] ohci-pci 0000:00:02.0: OHCI PCI host controller
+[ 2.350966] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
+[ 2.358024] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
+[ 2.358027] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[ 2.358029] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 2.358031] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 2.358169] tg3 0000:03:00.0: enabling device (0004 -> 0006)
+[ 2.358359] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
+[ 2.404974] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
+[ 2.450903] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
+[ 2.461351] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
+[ 2.468467] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
+[ 2.468469] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 2.468470] usb usb2: Product: OHCI PCI host controller
+[ 2.468472] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
+[ 2.468473] usb usb2: SerialNumber: 0000:00:02.0
+[ 2.468658] hub 2-0:1.0: USB hub found
+[ 2.468668] hub 2-0:1.0: 10 ports detected
+[ 2.509526] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 2.517503] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 2.530708] FS-Cache: Loaded
+[ 2.537885] RPC: Registered named UNIX socket transport module.
+[ 2.544581] RPC: Registered udp transport module.
+[ 2.550647] RPC: Registered tcp transport module.
+[ 2.556722] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[ 2.569177] FS-Cache: Netfs 'nfs' registered for caching
+[ 2.583607] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
+[ 2.630448] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
+[ 2.730316] tsc: Refined TSC clocksource calibration: 1909.786 MHz
+[ 3.734066] Switched to clocksource tsc
+[ 4.221789] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
+[ 4.228456] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
+[ 4.235421] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[ 8.907796] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
+[ 8.921986] systemd[1]: Detected architecture 'x86-64'.
+[ 10.685873] random: nonblocking pool is initialized
+[ 10.692082] systemd[1]: Inserted module 'autofs4'
+[ 10.701430] systemd[1]: Set hostname to <cb-test-tgt>.
+[ 13.156583] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
+[ 13.169672] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
+[ 13.185243] systemd[1]: Expecting device dev-ttyS0.device...
+[ 13.198837] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
+[ 13.206869] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
+[ 13.214635] systemd[1]: Starting Remote File Systems (Pre).
+[ 13.230708] systemd[1]: Reached target Remote File Systems (Pre).
+[ 13.236941] systemd[1]: Starting Encrypted Volumes.
+[ 13.250701] systemd[1]: Reached target Encrypted Volumes.
+[ 13.256229] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
+[ 13.264407] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
+[ 13.272440] systemd[1]: Starting Paths.
+[ 13.286780] systemd[1]: Reached target Paths.
+[ 13.291384] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
+[ 13.314702] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
+[ 13.324266] systemd[1]: Starting Swap.
+[ 13.338681] systemd[1]: Reached target Swap.
+[ 13.343097] systemd[1]: Starting Root Slice.
+[ 13.354682] systemd[1]: Created slice Root Slice.
+[ 13.359527] systemd[1]: Starting User and Session Slice.
+[ 13.374668] systemd[1]: Created slice User and Session Slice.
+[ 13.380556] systemd[1]: Starting Delayed Shutdown Socket.
+[ 13.394744] systemd[1]: Listening on Delayed Shutdown Socket.
+[ 13.400685] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
+[ 13.418648] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
+[ 13.425741] systemd[1]: Starting Journal Socket (/dev/log).
+[ 13.442647] systemd[1]: Listening on Journal Socket (/dev/log).
+[ 13.448720] systemd[1]: Starting udev Kernel Socket.
+[ 13.466639] systemd[1]: Listening on udev Kernel Socket.
+[ 13.472098] systemd[1]: Starting udev Control Socket.
+[ 13.486623] systemd[1]: Listening on udev Control Socket.
+[ 13.492141] systemd[1]: Starting Journal Socket.
+[ 13.506611] systemd[1]: Listening on Journal Socket.
+[ 13.511715] systemd[1]: Starting System Slice.
+[ 13.526604] systemd[1]: Created slice System Slice.
+[ 13.531608] systemd[1]: Starting system-getty.slice.
+[ 13.546614] systemd[1]: Created slice system-getty.slice.
+[ 13.552149] systemd[1]: Starting system-serial\x2dgetty.slice.
+[ 13.566594] systemd[1]: Created slice system-serial\x2dgetty.slice.
+[ 13.573000] systemd[1]: Starting Increase datagram queue length...
+[ 13.591842] systemd[1]: Mounting Debug File System...
+[ 13.607422] systemd[1]: Mounting POSIX Message Queue File System...
+[ 13.710141] systemd[1]: Starting Load Kernel Modules...
+[ 14.734194] systemd[1]: Started Set Up Additional Binary Formats.
+[ 14.789297] systemd[1]: Starting Create list of required static device nodes for the current kernel...
+[ 14.812153] systemd[1]: Starting udev Coldplug all Devices...
+[ 14.827685] systemd[1]: Mounting Huge Pages File System...
+[ 14.843371] systemd[1]: Starting Slices.
+[ 14.858218] systemd[1]: Reached target Slices.
+[ 14.863005] systemd[1]: Starting Remount Root and Kernel File Systems...
+[ 14.894207] systemd[1]: Started Increase datagram queue length.
+[ 14.903188] systemd[1]: Starting Syslog Socket.
+[ 14.918205] systemd[1]: Listening on Syslog Socket.
+[ 14.923303] systemd[1]: Starting Sockets.
+[ 14.938200] systemd[1]: Reached target Sockets.
+[ 14.942948] systemd[1]: Starting Journal Service...
+[ 14.966131] systemd[1]: Started Journal Service.
+[ 17.399647] systemd-udevd[191]: starting version 215
+[ 17.430669] systemd-journald[174]: Received request to flush runtime journal from PID 1
+[ 25.739670] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
+[ 25.747639] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
+[ 26.415813] EDAC MC: Ver: 3.0.0
+[ 26.488529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
+[ 26.569130] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
+[ 26.577657] ACPI: Power Button [PWRB]
+[ 26.581492] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
+[ 26.588985] ACPI: Power Button [PWRF]
+[ 26.666008] FDC 0 is a post-1991 82077
+[ 26.746018] MCE: In-kernel MCE decoding enabled.
+[ 27.275302] SCSI subsystem initialized
+[ 27.375546] input: PC Speaker as /devices/platform/pcspkr/input/input4
+[ 27.417018] AMD64 EDAC driver v3.4.0
+[ 27.420810] EDAC amd64: DRAM ECC enabled.
+[ 27.424970] EDAC amd64: F10h detected (node 0).
+[ 27.429692] EDAC MC: DCT0 chip selects:
+[ 27.429695] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 27.434531] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 27.439380] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 27.444213] EDAC amd64: MC: 6: 1024MB 7: 1024MB
+[ 27.449000] EDAC MC: DCT1 chip selects:
+[ 27.449002] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 27.453789] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 27.458572] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 27.463355] EDAC amd64: MC: 6: 1024MB 7: 1024MB
+[ 27.468128] EDAC amd64: using x4 syndromes.
+[ 27.472383] EDAC amd64: MCT channel count: 2
+[ 27.476770] EDAC amd64: CS6: Registered DDR2 RAM
+[ 27.481478] EDAC amd64: CS7: Registered DDR2 RAM
+[ 27.486412] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
+[ 27.496249] EDAC amd64: DRAM ECC enabled.
+[ 27.500431] EDAC amd64: F10h detected (node 1).
+[ 27.505098] EDAC MC: DCT0 chip selects:
+[ 27.505101] EDAC amd64: MC: 0: 1024MB 1: 0MB
+[ 27.509899] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 27.514699] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 27.519497] EDAC amd64: MC: 6: 0MB 7: 0MB
+[ 27.524295] EDAC MC: DCT1 chip selects:
+[ 27.524297] EDAC amd64: MC: 0: 0MB 1: 0MB
+[ 27.529096] EDAC amd64: MC: 2: 0MB 3: 0MB
+[ 27.533888] EDAC amd64: MC: 4: 0MB 5: 0MB
+[ 27.538687] EDAC amd64: MC: 6: 0MB 7: 0MB
+[ 27.543491] EDAC amd64: using x4 syndromes.
+[ 27.547765] EDAC amd64: MCT channel count: 1
+[ 27.552174] EDAC amd64: CS0: Registered DDR2 RAM
+[ 27.557058] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
+[ 27.566914] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
+[ 27.836405] libata version 3.00 loaded.
+[ 27.959894] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
+[ 27.965220] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
+[ 27.973709] pata_amd 0000:00:06.0: version 0.4.1
+[ 27.974335] scsi0 : pata_amd
+[ 27.977480] scsi1 : pata_amd
+[ 27.980504] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
+[ 27.987571] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
+[ 28.328157] acpi-cpufreq: overriding BIOS provided _PSD data
+[ 28.775580] sata_nv 0000:00:07.0: version 3.5
+[ 28.775957] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
+[ 28.782734] scsi2 : sata_nv
+[ 28.785952] scsi3 : sata_nv
+[ 28.788931] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
+[ 28.796194] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
+[ 28.803650] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
+[ 28.809940] scsi4 : sata_nv
+[ 28.812967] scsi5 : sata_nv
+[ 28.815910] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
+[ 28.823140] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
+[ 29.034519] kvm: Nested Virtualization enabled
+[ 29.039320] kvm: Nested Paging enabled
+[ 29.113200] ata3: SATA link down (SStatus 0 SControl 300)
+[ 29.141175] ata5: SATA link down (SStatus 0 SControl 300)
+[ 29.429087] ata4: SATA link down (SStatus 0 SControl 300)
+[ 29.744979] ata6: SATA link down (SStatus 0 SControl 300)
+[ 67.386842] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****
+[ 300.854177] [Hardware Error]: Corrected error, no action required.
+[ 300.860496] [Hardware Error]: CPU:4 (10:2:1) MC4_STATUS[Over|CE|MiscV|-|AddrV|CECC]: 0xdc224000da080a13
+[ 300.870128] [Hardware Error]: MC4_ADDR: 0x000000017c906500
+[ 300.875696] [Hardware Error]: MC4 Error (node 1): DRAM ECC error detected on the NB.
+[ 300.883607] EDAC MC1: 1 CE on mc#1csrow#0channel#0 (csrow:0 channel:0 page:0x17c906 offset:0x500 grain:0 syndrome:0xda44)
+[ 300.894642] [Hardware Error]: cache level: L3/GEN, mem/io: MEM, mem-tx: RD, part-proc: RES (no timeout)
+[ 366.155903] nfs: server 10.100.1.1 not responding, still trying
+[ 366.569702] nfs: server 10.100.1.1 OK