[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13-1-grml-amd64 (team@grml.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.6-1+grml.1 (2014-03-10)
[    0.000000] Command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce live-media-path=/live/grml64-small/ bootid=0a739a80-53de-425a-98a5-dbbb70cee01b ssh=remote verbose console=ttyS0,115200n8 memory_corruption_check=1 memory_corruption_check_size=512k BOOT_IMAGE=/boot/grml64small/vmlinuz 
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002efccfff] usable
[    0.000000] BIOS-e820: [mem 0x000000002efcd000-0x000000003effffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LiPPERT FrontRunner-AF/FrontRunner-AF, BIOS 4.0-7919-g054c83a 01/10/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x2efcd max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FE0000000 write-back
[    0.000000]   1 base 020000000 mask FF8000000 write-back
[    0.000000]   2 base 028000000 mask FFC000000 write-back
[    0.000000]   3 base 02C000000 mask FFE000000 write-back
[    0.000000]   4 base 02E000000 mask FFF000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f4b10-0x000f4b1f] mapped at [ffff8800000f4b10]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[    0.000000] BRK [0x01aa1000, 0x01aa1fff] PGTABLE
[    0.000000] BRK [0x01aa2000, 0x01aa2fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x2dc00000-0x2ddfffff]
[    0.000000]  [mem 0x2dc00000-0x2ddfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2c000000-0x2dbfffff]
[    0.000000]  [mem 0x2c000000-0x2dbfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2bffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x2bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x2de00000-0x2efccfff]
[    0.000000]  [mem 0x2de00000-0x2edfffff] page 2M
[    0.000000]  [mem 0x2ee00000-0x2efccfff] page 4k
[    0.000000] BRK [0x01aa3000, 0x01aa3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x2df99000-0x2efcbfff]
[    0.000000] ACPI: RSDP 00000000000f4ae0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 000000002efe26e0 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 000000002efe4d00 0000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 000000002efe2850 0024A9 (v02 AMD    COREBOOT 00010001 INTL 20130626)
[    0.000000] ACPI: FACS 000000002efe2810 000040
[    0.000000] ACPI: SSDT 000000002efe4e00 000045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 000000002efe4e50 00005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HEST 000000002efe4eb0 000198 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 000000002efe5050 00168E (v02    AMD     ALIB 00000001 MSFT 04000000)
[    0.000000] ACPI: SSDT 000000002efe66e0 0003DE (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: HPET 000000002efe6ac0 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000002efccfff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x2efccfff]
[    0.000000]   NODE_DATA [mem 0x2df94000-0x2df98fff]
[    0.000000]  [ffffea0000000000-ffffea0000bfffff] PMD -> [ffff88002ca00000-ffff88002d5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x2efccfff]
[    0.000000] On node 0 totalpages: 192363
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 133 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 2576 pages used for memmap
[    0.000000]   DMA32 zone: 188365 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x3f000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88002dc00000 s85824 r8192 d20672 u1048576
[    0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 189598
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img boot=live apm=power-off vga=791 nomce live-media-path=/live/grml64-small/ bootid=0a739a80-53de-425a-98a5-dbbb70cee01b ssh=remote verbose console=ttyS0,115200n8 memory_corruption_check=1 memory_corruption_check_size=512k BOOT_IMAGE=/boot/grml64small/vmlinuz 
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 728644K/769452K available (4965K kernel code, 697K rwdata, 1716K rodata, 1004K init, 952K bss, 40808K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [ttyS0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1649.907 MHz processor
[    0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3299.81 BogoMIPS (lpj=6599628)
[    0.010609] pid_max: default: 32768 minimum: 301
[    0.015275] Security Framework initialized
[    0.019408] AppArmor: AppArmor disabled by boot time parameter
[    0.025229] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.031962] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.039948] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.047315] Mount-cache hash table entries: 256
[    0.052296] Initializing cgroup subsys memory
[    0.056736] Initializing cgroup subsys devices
[    0.061173] Initializing cgroup subsys freezer
[    0.065610] Initializing cgroup subsys blkio
[    0.069872] Initializing cgroup subsys perf_event
[    0.074616] tseg: 0000000000
[    0.074628] CPU: Physical Processor ID: 0
[    0.078633] CPU: Processor Core ID: 0
[    0.082294] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.082294] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.082294] tlb_flushall_shift: 5
[    0.096683] Freeing SMP alternatives memory: 20K (ffffffff819ab000 - ffffffff819b0000)
[    0.107044] ACPI: Core revision 20131115
[    0.114579] ACPI: All ACPI Tables successfully acquired
[    0.120375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.165910] smpboot: CPU0: AMD G-T56N Processor (fam: 14, model: 02, stepping: 00)
[    0.280656] Performance Events: AMD PMU driver.
[    0.285193] ... version:                0
[    0.289191] ... bit width:              48
[    0.293275] ... generic registers:      4
[    0.297273] ... value mask:             0000ffffffffffff
[    0.302570] ... max period:             00007fffffffffff
[    0.307866] ... fixed-purpose events:   0
[    0.311863] ... event mask:             000000000000000f
[    0.317666] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.325949] x86: Booting SMP configuration:
[    0.330161] .... node  #0, CPUs:      #1
[    0.347007] x86: Booted up 1 node, 2 CPUs
[    0.351233] smpboot: Total of 2 processors activated (6599.62 BogoMIPS)
[    0.358625] devtmpfs: initialized
[    0.368931] NET: Registered protocol family 16
[    0.373598] cpuidle: using governor ladder
[    0.377728] cpuidle: using governor menu
[    0.381812] ACPI: bus type PCI registered
[    0.385812] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.392421] PCI: Using configuration type 1 for base access
[    0.397980] PCI: Using configuration type 1 for extended access
[    0.405179] bio: create slab <bio-0> at 0
[    0.409459] ACPI: Added _OSI(Module Device)
[    0.413702] ACPI: Added _OSI(Processor Device)
[    0.418136] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.422826] ACPI: Added _OSI(Processor Aggregator Device)
[    0.430214] ACPI: Executed 2 blocks of module-level executable AML code
[    0.441510] ACPI: Interpreter enabled
[    0.445271] ACPI: (supports S0 S1 S2 S3 S4 S5)
[    0.449738] ACPI: Using IOAPIC for interrupt routing
[    0.454720] HEST: Table parsing has been initialized.
[    0.459763] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.469027] ACPI: No dock devices found.
[    0.492068] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.499094] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.506101] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.513109] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.520112] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.527118] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
[    0.532497] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.539464] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
[    0.546448] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.552660] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.560906] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.569529] PCI host bridge to bus 0000:00
[    0.573619] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.579093] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.585257] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.591422] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.598278] pci_bus 0000:00: root bus resource [mem 0x3f000000-0xffffffff]
[    0.605146] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
[    0.605332] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000
[    0.605349] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.605360] pci 0000:00:01.0: reg 0x14: [io  0x2000-0x20ff]
[    0.605371] pci 0000:00:01.0: reg 0x18: [mem 0xf0200000-0xf023ffff]
[    0.605439] pci 0000:00:01.0: supports D1 D2
[    0.605537] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.611290] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400
[    0.611375] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.611474] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.617272] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.617298] pci 0000:00:11.0: reg 0x10: [io  0x2410-0x2417]
[    0.617311] pci 0000:00:11.0: reg 0x14: [io  0x2420-0x2423]
[    0.617324] pci 0000:00:11.0: reg 0x18: [io  0x2418-0x241f]
[    0.617336] pci 0000:00:11.0: reg 0x1c: [io  0x2424-0x2427]
[    0.617349] pci 0000:00:11.0: reg 0x20: [io  0x2400-0x240f]
[    0.617362] pci 0000:00:11.0: reg 0x24: [mem 0xf0247000-0xf02473ff]
[    0.617549] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.617568] pci 0000:00:12.0: reg 0x10: [mem 0xf0244000-0xf0244fff]
[    0.617718] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.623501] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.623526] pci 0000:00:12.2: reg 0x10: [mem 0xf0247400-0xf02474ff]
[    0.623626] pci 0000:00:12.2: supports D1 D2
[    0.623629] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.623723] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.629505] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.629523] pci 0000:00:13.0: reg 0x10: [mem 0xf0245000-0xf0245fff]
[    0.629673] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.635467] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.635492] pci 0000:00:13.2: reg 0x10: [mem 0xf0247500-0xf02475ff]
[    0.635592] pci 0000:00:13.2: supports D1 D2
[    0.635595] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.635688] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.641471] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.641716] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.641744] pci 0000:00:14.2: reg 0x10: [mem 0xf0240000-0xf0243fff 64bit]
[    0.641825] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.641963] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.642202] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.642332] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.648111] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.648130] pci 0000:00:16.0: reg 0x10: [mem 0xf0246000-0xf0246fff]
[    0.648279] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.653990] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.654015] pci 0000:00:16.2: reg 0x10: [mem 0xf0247600-0xf02476ff]
[    0.654114] pci 0000:00:16.2: supports D1 D2
[    0.654117] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.654208] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.659954] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
[    0.660112] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
[    0.660266] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
[    0.660419] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
[    0.660584] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
[    0.660735] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
[    0.660892] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
[    0.661043] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
[    0.661382] pci 0000:01:00.0: [8086:1533] type 00 class 0x020000
[    0.661407] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf00fffff]
[    0.661479] pci 0000:01:00.0: reg 0x18: [io  0x1000-0x101f]
[    0.661496] pci 0000:01:00.0: reg 0x1c: [mem 0xf0100000-0xf0103fff]
[    0.661615] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.669140] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.674149] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.674157] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.674314] pci 0000:02:08.0: [1283:8888] type 00 class 0x068000
[    0.674564] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[    0.681356] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.681360] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.681364] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.681368] pci 0000:00:14.4:   bridge window [mem 0x3f000000-0xffffffff] (subtractive decode)
[    0.682068] ACPI: Enabled 6 GPEs in block 00 to 1F
[    0.686893] ACPI: \_SB_.PCI0: notify handler is installed
[    0.686928] Found 1 acpi root devices
[    0.687281] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[    0.695420] vgaarb: loaded
[    0.698120] vgaarb: bridge control possible 0000:00:01.0
[    0.703536] PCI: Using ACPI for IRQ routing
[    0.707748] PCI: pci_cache_line_size set to 64 bytes
[    0.707936] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.707941] e820: reserve RAM buffer [mem 0x2efcd000-0x2fffffff]
[    0.708231] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.713140] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.721037] Switched to clocksource hpet
[    0.728910] pnp: PnP ACPI init
[    0.732060] ACPI: bus type PNP registered
[    0.736709] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.736766] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.736791] pnp 00:02: [dma 4]
[    0.736832] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.736890] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.736985] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.737064] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.737096] pnp: PnP ACPI: found 6 devices
[    0.741223] ACPI: bus type PNP unregistered
[    0.755679] pci 0000:00:04.0: PCI bridge to [bus 01]
[    0.760648] pci 0000:00:04.0:   bridge window [io  0x1000-0x1fff]
[    0.766734] pci 0000:00:04.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.773515] pci 0000:00:14.4: PCI bridge to [bus 02]
[    0.778485] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.778490] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.778494] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.778498] pci_bus 0000:00: resource 7 [mem 0x3f000000-0xffffffff]
[    0.778502] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.778506] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.778510] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.778513] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.778517] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.778520] pci_bus 0000:02: resource 7 [mem 0x3f000000-0xffffffff]
[    0.778658] NET: Registered protocol family 2
[    0.783397] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.790551] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.797149] TCP: Hash tables configured (established 8192 bind 8192)
[    0.803600] TCP: reno registered
[    0.806836] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.812759] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.819401] NET: Registered protocol family 1
[    0.823784] pci 0000:00:01.0: Boot video device
[    0.827164] PCI: CLS 64 bytes, default 64
[    0.827275] Unpacking initramfs...
[    4.275696] Freeing initrd memory: 16588K (ffff88002df99000 - ffff88002efcc000)
[    4.283435] LVT offset 0 assigned for vector 0x400
[    4.288335] perf: AMD IBS detected (0x000000ff)
[    4.292938] microcode: CPU0: patch_level=0x05000101
[    4.297893] microcode: CPU1: patch_level=0x05000101
[    4.303055] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    4.311883] Scanning for low memory corruption every 60 seconds
[    4.319342] audit: initializing netlink socket (disabled)
[    4.324758] type=2000 audit(1402534687.108:1): initialized
[    4.354386] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    4.361664] VFS: Disk quotas dquot_6.5.2
[    4.365672] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.372272] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.378432] aufs 3.13-20140127
[    4.381490] msgmni has been set to 1455
[    4.386499] alg: No test for stdrng (krng)
[    4.390691] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.398203] io scheduler noop registered
[    4.402122] io scheduler deadline registered
[    4.406439] io scheduler cfq registered (default)
[    4.411287] pcieport 0000:00:04.0: device [1022:1512] has invalid IRQ; check vendor BIOS
[    4.419683] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[    4.419838] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[    4.426855] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    4.433371] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[    4.433396] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.438984] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.445710] GHES: Failed to enable APEI firmware first mode.
[    4.451556] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    4.478427] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    4.506848] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    4.515625] Linux agpgart interface v0.103
[    4.519969] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.531700] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.536675] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.542281] mousedev: PS/2 mouse device common for all mice
[    4.547990] rtc_cmos 00:00: RTC can wake from S4
[    4.552880] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[    4.559012] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[    4.566171] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    4.572638] AMD IOMMUv2 functionality not available on this system
[    4.579547] TCP: cubic registered
[    4.582990] NET: Registered protocol family 10
[    4.587871] mip6: Mobile IPv6
[    4.591008] NET: Registered protocol family 17
[    4.595453] mpls_gso: MPLS GSO support
[    4.599831] registered taskstats version 1
[    4.605360] rtc_cmos 00:00: setting system clock to 2014-06-12 00:58:09 UTC (1402534689)
[    4.613510] PM: Hibernation image not present or could not be loaded.
[    4.615659] Freeing unused kernel memory: 1004K (ffffffff818b0000 - ffffffff819ab000)
[    4.623516] Write protecting the kernel read-only data: 8192k
[    4.635688] Freeing unused kernel memory: 1168K (ffff8800014dc000 - ffff880001600000)
[    4.645316] Freeing unused kernel memory: 332K (ffff8800017ad000 - ffff880001800000)
[    4.697088] systemd-udevd[64]: starting version 204
[    4.724732] pps_core: LinuxPPS API ver. 1 registered
[    4.730233] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.746673] ACPI: bus type USB registered
[    4.750866] [drm] Initialized drm 1.1.0 20060810
[    4.766726] PTP clock support registered
[    4.774430] SCSI subsystem initialized
[    4.779825] usbcore: registered new interface driver usbfs
[    4.790488] dca service started, version 1.12.1
[    4.796781] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    4.805052] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[    4.812027] igb: Copyright (c) 2007-2013 Intel Corporation.
[    4.812550] ACPI: Power Button [PWRB]
[    4.812660] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.812663] ACPI: Power Button [PWRF]
[    4.832998] usbcore: registered new interface driver hub
[    4.838420] libata version 3.00 loaded.
[    4.840271] ahci 0000:00:11.0: version 3.0
[    4.840855] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    4.849046] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part 
[    4.860350] igb 0000:01:00.0: irq 41 for MSI/MSI-X
[    4.860368] igb 0000:01:00.0: irq 42 for MSI/MSI-X
[    4.860379] igb 0000:01:00.0: irq 43 for MSI/MSI-X
[    4.860391] igb 0000:01:00.0: irq 44 for MSI/MSI-X
[    4.860403] igb 0000:01:00.0: irq 45 for MSI/MSI-X
[    4.860726] usbcore: registered new device driver usb
[    4.872552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.880856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.887141] ehci-pci: EHCI PCI platform driver
[    4.893800] ohci-pci: OHCI PCI platform driver
[    4.907985] scsi0 : ahci
[    4.913117] scsi1 : ahci
[    4.920021] igb 0000:01:00.0: added PHC on eth0
[    4.924627] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[    4.931496] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:20:9d:23:81:13
[    4.938703] igb 0000:01:00.0: eth0: PBA No: 200500-000
[    4.943842] [drm] radeon kernel modesetting enabled.
[    4.943851] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    4.946075] scsi2 : ahci
[    4.959149] scsi3 : ahci
[    4.964151] scsi4 : ahci
[    4.970080] scsi5 : ahci
[    4.973543] ata1: SATA max UDMA/133 abar m1024@0xf0247000 port 0xf0247100 irq 19
[    4.980962] ata2: SATA max UDMA/133 abar m1024@0xf0247000 port 0xf0247180 irq 19
[    4.988346] ata3: SATA max UDMA/133 abar m1024@0xf0247000 port 0xf0247200 irq 19
[    4.995729] ata4: SATA max UDMA/133 abar m1024@0xf0247000 port 0xf0247280 irq 19
[    5.003112] ata5: SATA max UDMA/133 abar m1024@0xf0247000 port 0xf0247300 irq 19
[    5.010495] ata6: SATA max UDMA/133 abar m1024@0xf0247000 port 0xf0247380 irq 19
[    5.021675] QUIRK: Enable AMD PLL fix
[    5.021758] ehci-pci 0000:00:12.2: EHCI Host Controller
[    5.027053] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    5.036451] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.045208] ehci-pci 0000:00:12.2: debug port 1
[    5.052226] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0247400
[    5.068061] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    5.074605] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.081399] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.088610] usb usb1: Product: EHCI Host Controller
[    5.093480] usb usb1: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[    5.099824] usb usb1: SerialNumber: 0000:00:12.2
[    5.104936] hub 1-0:1.0: USB hub found
[    5.108837] hub 1-0:1.0: 5 ports detected
[    5.113607] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    5.119355] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 2
[    5.126800] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0244000
[    5.191995] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.198772] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.205980] usb usb2: Product: OHCI PCI host controller
[    5.211196] usb usb2: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[    5.217543] usb usb2: SerialNumber: 0000:00:12.0
[    5.222613] hub 2-0:1.0: USB hub found
[    5.226388] hub 2-0:1.0: 5 ports detected
[    5.231750] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1002:0x9806).
[    5.239621] [drm] register mmio base: 0xF0200000
[    5.244276] [drm] register mmio size: 262144
[    5.248571] radeon 0000:00:01.0: Invalid ROM contents
[    5.253641] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
[    5.260069] radeon 0000:00:01.0: Fatal error during GPU init
[    5.265722] [drm] radeon: finishing device.
[    5.269897] [TTM] Memory type 2 has not been initialized
[    5.282233] tsc: Refined TSC clocksource calibration: 1649.999 MHz
[    5.289095] radeon: probe of 0000:00:01.0 failed with error -22
[    5.296290] ehci-pci 0000:00:13.2: EHCI Host Controller
[    5.301529] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[    5.308917] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.317611] ehci-pci 0000:00:13.2: debug port 1
[    5.322179] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0247500
[    5.336271] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    5.342149] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.344074] ata1: SATA link down (SStatus 0 SControl 300)
[    5.354350] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.354428] ata4: SATA link down (SStatus 0 SControl 300)
[    5.354512] ata6: SATA link down (SStatus 0 SControl 300)
[    5.356090] ata2: SATA link down (SStatus 0 SControl 300)
[    5.356167] ata5: SATA link down (SStatus 0 SControl 300)
[    5.356209] ata3: SATA link down (SStatus 0 SControl 300)
[    5.388469] usb usb3: Product: EHCI Host Controller
[    5.393340] usb usb3: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[    5.399681] usb usb3: SerialNumber: 0000:00:13.2
[    5.404638] hub 3-0:1.0: USB hub found
[    5.408394] hub 3-0:1.0: 5 ports detected
[    5.412976] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    5.418550] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 4
[    5.425956] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0245000
[    5.488374] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.495176] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.502386] usb usb4: Product: OHCI PCI host controller
[    5.507601] usb usb4: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[    5.513948] usb usb4: SerialNumber: 0000:00:13.0
[    5.518990] hub 4-0:1.0: USB hub found
[    5.522749] hub 4-0:1.0: 5 ports detected
[    5.527296] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    5.532868] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 5
[    5.540280] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0246000
[    5.604240] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.611016] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.618225] usb usb5: Product: OHCI PCI host controller
[    5.623442] usb usb5: Manufacturer: Linux 3.13-1-grml-amd64 ohci_hcd
[    5.629782] usb usb5: SerialNumber: 0000:00:16.0
[    5.634631] hub 5-0:1.0: USB hub found
[    5.638403] hub 5-0:1.0: 4 ports detected
[    5.645079] ehci-pci 0000:00:16.2: EHCI Host Controller
[    5.650330] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 6
[    5.657720] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    5.666414] ehci-pci 0000:00:16.2: debug port 1
[    5.670982] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0247600
[    5.744564] usb 3-3: new high-speed USB device number 2 using ehci-pci
[    5.756428] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    5.762263] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    5.769091] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.776306] usb usb6: Product: EHCI Host Controller
[    5.781177] usb usb6: Manufacturer: Linux 3.13-1-grml-amd64 ehci_hcd
[    5.787519] usb usb6: SerialNumber: 0000:00:16.2
[    5.792486] hub 6-0:1.0: USB hub found
[    5.796237] hub 6-0:1.0: 4 ports detected
[    5.864698] hub 5-0:1.0: USB hub found
[    5.868537] hub 5-0:1.0: 4 ports detected
[    5.895900] usb 3-3: New USB device found, idVendor=0781, idProduct=5406
[    5.902642] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.909771] usb 3-3: Product: U3 Cruzer Micro
[    5.914131] usb 3-3: Manufacturer: SanDisk Corporation
[    5.919269] usb 3-3: SerialNumber: 000016215270D67E
[    5.931872] usb-storage 3-3:1.0: USB Mass Storage device detected
[    5.938267] scsi6 : usb-storage 3-3:1.0
[    5.942263] usbcore: registered new interface driver usb-storage
[    5.969614] device-mapper: uevent: version 1.0.3
[    5.974631] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    6.289158] Switched to clocksource tsc
[    6.943459] scsi 6:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.21 PQ: 0 ANSI: 2
[    6.963846] sd 6:0:0:0: [sda] 2006673 512-byte logical blocks: (1.02 GB/979 MiB)
[    6.972476] sd 6:0:0:0: [sda] Write Protect is off
[    6.977266] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
[    6.978858] sd 6:0:0:0: [sda] No Caching mode page found
[    6.984189] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    6.993842] sd 6:0:0:0: [sda] No Caching mode page found
[    6.999175] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    7.015926]  sda: sda1
[    7.023134] sd 6:0:0:0: [sda] No Caching mode page found
[    7.029771] sd 6:0:0:0: [sda] Assuming drive cache: write through
[    7.035901] sd 6:0:0:0: [sda] Attached SCSI removable disk
[    7.046916] sd 6:0:0:0: Attached scsi generic sg0 type 0
[    7.299390] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[    7.385483] loop: module loaded
[    7.444840]  loop0: unknown partition table
[    9.286996] random: nonblocking pool is initialized
[   10.137834] FS-Cache: Loaded
[   10.166577] 9pnet: Installing 9P2000 support
[   10.196149] 9p: Installing v9fs 9p2000 file system support
[   10.201792] FS-Cache: Netfs '9p' registered for caching
[   13.324116] systemd-udevd[806]: starting version 204
[   13.558596] ACPI: acpi_idle registered with cpuidle
[   13.667094] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   13.676178] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8060
[   13.726553] acpi-cpufreq: overriding BIOS provided _PSD data
[   13.763376] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   13.774487] sp5100_tco: PCI Revision ID: 0x42
[   13.781981] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   13.788180] sp5100_tco: Last reboot was not triggered by watchdog.
[   13.795804] sp5100_tco: initialized (0xffffc900001d8b00). heartbeat=60 sec (nowayout=0)
[   13.861750] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   14.349295] kvm: Nested Virtualization enabled
[   14.357763] kvm: Nested Paging enabled
[   14.414192] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[   17.183520] RPC: Registered named UNIX socket transport module.
[   17.189503] RPC: Registered udp transport module.
[   17.194195] RPC: Registered tcp transport module.
[   17.198888] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   17.355222] FS-Cache: Netfs 'nfs' registered for caching
[   17.531238] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.220880] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.175358] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   20.176012] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.379957] fuse init (API version 7.22)
[   22.460258] ipmi message handler version 39.2
[   93.543389] type=1006 audit(1420890381.188:2): pid=2608 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
[  152.831660] type=1006 audit(1420890440.440:3): pid=2619 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=2 res=1
[  217.392104] type=1006 audit(1420890504.960:4): pid=2628 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=3 res=1
[  230.062992] type=1006 audit(1420890517.624:5): pid=2633 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=4 res=1
[  230.292403] type=1006 audit(1420890517.852:6): pid=2638 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=5 res=1
[  230.528544] type=1006 audit(1420890518.088:7): pid=2643 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=6 res=1
[  230.770629] type=1006 audit(1420890518.328:8): pid=2648 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=7 res=1
[  418.175097] type=1006 audit(1420890705.616:9): pid=2740 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=8 res=1
[  418.411933] type=1006 audit(1420890705.852:10): pid=2745 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=9 res=1
[  418.643762] type=1006 audit(1420890706.084:11): pid=2751 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=10 res=1
[  418.872046] type=1006 audit(1420890706.312:12): pid=2756 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=11 res=1
[  830.163071] type=1006 audit(1420891117.344:13): pid=2810 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=12 res=1
[  830.391451] type=1006 audit(1420891117.572:14): pid=2815 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=13 res=1
[  830.623316] type=1006 audit(1420891117.804:15): pid=2821 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=14 res=1
[  830.849520] type=1006 audit(1420891118.028:16): pid=2826 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=15 res=1
[  967.216654] type=1006 audit(1420891254.312:17): pid=2840 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=16 res=1
[  967.448938] type=1006 audit(1420891254.540:18): pid=2845 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=17 res=1
[  967.684898] type=1006 audit(1420891254.780:19): pid=2850 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=18 res=1
[  967.914832] type=1006 audit(1420891255.008:20): pid=2855 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=19 res=1