[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt7-1 (2015-03-01)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dffa8fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dffa9000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS KFSN4-DRE/KFSN4-DRE, BIOS 4.0-9204-g1f0569f-dirty 04/15/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x160000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000F8000000 mask FFFFFC000000 write-combining
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000160000000 aka 5632M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xdffa9 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f1cf0-0x000f1cff] mapped at [ffff8800000f1cf0]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01af3000, 0x01af3fff] PGTABLE
[    0.000000] BRK [0x01af4000, 0x01af4fff] PGTABLE
[    0.000000] BRK [0x01af5000, 0x01af5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15fe00000-0x15fffffff]
[    0.000000]  [mem 0x15fe00000-0x15fffffff] page 2M
[    0.000000] BRK [0x01af6000, 0x01af6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x15c000000-0x15fdfffff]
[    0.000000]  [mem 0x15c000000-0x15fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x15bffffff]
[    0.000000]  [mem 0x100000000-0x13fffffff] page 1G
[    0.000000]  [mem 0x140000000-0x15bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xdffa8fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xdfdfffff] page 2M
[    0.000000]  [mem 0xdfe00000-0xdffa8fff] page 4k
[    0.000000] RAMDISK: [mem 0x7f775000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F1EC0 000024 (v02 CORE  )
[    0.000000] ACPI: XSDT 0x00000000DFFB20E0 000064 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 0x00000000DFFB48A0 000074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 0x00000000DFFB2250 002644 (v02 ASUS   COREBOOT 00000001 INTL 20150204)
[    0.000000] ACPI: FACS 0x00000000DFFB2210 000040
[    0.000000] ACPI: SSDT 0x00000000DFFB49A0 000D57 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: APIC 0x00000000DFFB5700 0000C6 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB57D0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5948 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 0x00000000DFFB5980 000038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 0x00000000DFFB59C0 000178 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 0x00000000DFFB5B38 000030 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 0x04 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x05 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x06 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 0x07 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 2 PXM 7 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0xdfffffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x100000000-0x11fffffff]
[    0.000000] SRAT: Node 1 PXM 1 [mem 0x120000000-0x15fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=3
[    0.000000] NUMA: node 2 [mem 0x00100000-0xdfffffff] overlaps with node 0 [mem 0x00100000-0xdfffffff]
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] Number of physical nodes 2
[    0.000000] Node 0 MemBase 0000000000000000 Limit 0000000120000000
[    0.000000] Node 1 MemBase 0000000120000000 Limit 0000000160000000
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x11fffffff]
[    0.000000]   NODE_DATA [mem 0x11fffb000-0x11fffffff]
[    0.000000] Initmem setup node 1 [mem 0x120000000-0x15fffffff]
[    0.000000]   NODE_DATA [mem 0x15fff9000-0x15fffdfff]
[    0.000000] [ffffea0003f00000-ffffea0003ffffff] potential offnode page_structs
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011be00000-ffff88011f7fffff] on node 0
[    0.000000]  [ffffea0004000000-ffffea0004dfffff] PMD -> [ffff88015e600000-ffff88015f3fffff] on node 1
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x15fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xdffa8fff]
[    0.000000]   node   0: [mem 0x100000000-0x11fffffff]
[    0.000000]   node   1: [mem 0x120000000-0x15fffffff]
[    0.000000] On node 0 totalpages: 1048391
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12487 pages used for memmap
[    0.000000]   DMA32 zone: 913321 pages, LIFO batch:31
[    0.000000]   Normal zone: 1792 pages used for memmap
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] On node 1 totalpages: 262144
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 24, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdffa9000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xffffffff]
[    0.000000] e820: [mem 0xf0000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:2
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88011fc00000 s80896 r8192 d21504 u524288
[    0.000000] pcpu-alloc: s80896 r8192 d21504 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 [1] 4 5 6 7 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 1292595
[    0.000000] Policy zone: Normal
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] AGP: Node 0: aperture [bus addr 0xf5ea000000-0xf5ebffffff] (32MB)
[    0.000000] Aperture beyond 4GB. Ignoring.
[    0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
[    0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[    0.000000] AGP: This costs you 64MB of RAM
[    0.000000] AGP: Mapping aperture over RAM [mem 0xd4000000-0xd7ffffff] (65536KB)
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xd7ffffff]
[    0.000000] Memory: 5015500K/5242140K available (5203K kernel code, 943K rwdata, 1832K rodata, 1204K init, 840K bss, 226640K reserved)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1909.848 MHz processor
[    0.000162] Calibrating delay loop (skipped), value calculated using timer frequency.. 3819.69 BogoMIPS (lpj=7639392)
[    0.010953] pid_max: default: 32768 minimum: 301
[    0.015675] ACPI: Core revision 20140424
[    0.022049] ACPI: All ACPI Tables successfully acquired
[    0.027568] Security Framework initialized
[    0.031745] AppArmor: AppArmor disabled by boot time parameter
[    0.037655] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.045468] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.058758] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.068621] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.075637] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.083600] Initializing cgroup subsys memory
[    0.088081] Initializing cgroup subsys devices
[    0.092622] Initializing cgroup subsys freezer
[    0.097147] Initializing cgroup subsys net_cls
[    0.101692] Initializing cgroup subsys blkio
[    0.106047] Initializing cgroup subsys perf_event
[    0.110852] Initializing cgroup subsys net_prio
[    0.115510] tseg: 0000000000
[    0.115524] CPU: Physical Processor ID: 0
[    0.119656] CPU: Processor Core ID: 0
[    0.124444] mce: CPU supports 6 MCE banks
[    0.128580] LVT offset 0 assigned for vector 0xf9
[    0.133384] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
[    0.148862] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[    0.158001] ftrace: allocating 21601 entries in 85 pages
[    0.173484] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=0 pin2=0
[    0.219127] smpboot: CPU0: Quad-Core AMD Opteron(tm) Processor 8347 (fam: 10, model: 02, stepping: 01)
[    0.336303] Performance Events: AMD PMU driver.
[    0.341027] ... version:                0
[    0.345104] ... bit width:              48
[    0.349279] ... generic registers:      4
[    0.353367] ... value mask:             0000ffffffffffff
[    0.358752] ... max period:             00007fffffffffff
[    0.364121] ... fixed-purpose events:   0
[    0.368209] ... event mask:             000000000000000f
[    0.376192] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.384511] x86: Booting SMP configuration:
[    0.388777] .... node  #0, CPUs:      #1 #2 #3
[    0.433384] .... node  #1, CPUs:   #4 #5 #6 #7
[    0.585038] x86: Booted up 2 nodes, 8 CPUs
[    0.589474] smpboot: Total of 8 processors activated (30558.00 BogoMIPS)
[    0.602137] devtmpfs: initialized
[    0.614133] pinctrl core: initialized pinctrl subsystem
[    0.619605] NET: Registered protocol family 16
[    0.624344] cpuidle: using governor ladder
[    0.628512] cpuidle: using governor menu
[    0.632518] node 0 link 1: io port [1000, 3fff]
[    0.632522] TOM: 00000000e0000000 aka 3584M
[    0.636785] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[    0.636789] node 0 link 1: mmio [fc000000, fc3fffff]
[    0.636792] node 0 link 1: mmio [f8000000, fbffffff]
[    0.636794] TOM2: 0000000160000000 aka 5632M
[    0.641133] bus: [bus 00-05] on node 0 link 1
[    0.641135] bus: 00 [io  0x0000-0xffff]
[    0.641137] bus: 00 [mem 0xf0000000-0xffffffff]
[    0.641138] bus: 00 [mem 0x160000000-0xfcffffffff]
[    0.641246] ACPI: bus type PCI registered
[    0.645328] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.652000] PCI: Using configuration type 1 for base access
[    0.657640] PCI: Using configuration type 1 for extended access
[    0.664255] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.670609] mtrr: probably your BIOS does not setup all CPUs.
[    0.676432] mtrr: corrected configuration.
[    0.693181] ACPI: Added _OSI(Module Device)
[    0.697482] ACPI: Added _OSI(Processor Device)
[    0.702003] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.706788] ACPI: Added _OSI(Processor Aggregator Device)
[    0.715671] ACPI: Interpreter enabled
[    0.719423] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.728907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.738371] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.747809] ACPI: (supports S0 S1 S5)
[    0.751541] ACPI: Using IOAPIC for interrupt routing
[    0.756626] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.784818] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.791080] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.799392] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.837878] acpi PNP0A03:00: host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
[    0.847993] PCI host bridge to bus 0000:00
[    0.852160] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.857722] pci_bus 0000:00: root bus resource [io  0x0d00-0x3fff]
[    0.863979] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfbffffff]
[    0.870930] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc3fffff]
[    0.877875] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.884140] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.884332] pci 0000:00:01.0: [10de:0051] type 00 class 0x060100
[    0.884340] pci 0000:00:01.0: reg 0x10: [io  0x2c00-0x2c7f]
[    0.884467] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.884478] pci 0000:00:01.1: reg 0x10: [io  0x3000-0x301f]
[    0.884503] pci 0000:00:01.1: reg 0x20: [io  0x2c80-0x2cbf]
[    0.884511] pci 0000:00:01.1: reg 0x24: [io  0x2cc0-0x2cff]
[    0.884553] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.884657] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.884673] pci 0000:00:02.0: reg 0x10: [mem 0xfc300000-0xfc300fff]
[    0.884699] pci 0000:00:02.0: supports D1 D2
[    0.884711] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.884759] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.890576] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.890589] pci 0000:00:02.1: reg 0x10: [mem 0xfc303000-0xfc3030ff]
[    0.890631] pci 0000:00:02.1: supports D1 D2
[    0.890650] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.890726] pci 0000:00:02.1: System wakeup disabled by ACPI
[    0.896540] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.896566] pci 0000:00:06.0: reg 0x20: [io  0x3020-0x302f]
[    0.896594] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.903810] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.910429] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.917656] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.924373] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.924385] pci 0000:00:07.0: reg 0x10: [io  0x3050-0x3057]
[    0.924390] pci 0000:00:07.0: reg 0x14: [io  0x3070-0x3073]
[    0.924394] pci 0000:00:07.0: reg 0x18: [io  0x3058-0x305f]
[    0.924399] pci 0000:00:07.0: reg 0x1c: [io  0x3074-0x3077]
[    0.924403] pci 0000:00:07.0: reg 0x20: [io  0x3030-0x303f]
[    0.924408] pci 0000:00:07.0: reg 0x24: [mem 0xfc301000-0xfc301fff]
[    0.924578] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.924588] pci 0000:00:08.0: reg 0x10: [io  0x3060-0x3067]
[    0.924592] pci 0000:00:08.0: reg 0x14: [io  0x3078-0x307b]
[    0.924597] pci 0000:00:08.0: reg 0x18: [io  0x3068-0x306f]
[    0.924602] pci 0000:00:08.0: reg 0x1c: [io  0x307c-0x307f]
[    0.924606] pci 0000:00:08.0: reg 0x20: [io  0x3040-0x304f]
[    0.924611] pci 0000:00:08.0: reg 0x24: [mem 0xfc302000-0xfc302fff]
[    0.924784] pci 0000:00:09.0: [10de:005c] type 01 class 0x060400
[    0.924903] pci 0000:00:09.0: System wakeup disabled by ACPI
[    0.930698] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.930747] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.930796] pci 0000:00:0b.0: System wakeup disabled by ACPI
[    0.936608] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.936679] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.936743] pci 0000:00:0c.0: System wakeup disabled by ACPI
[    0.942562] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.942612] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.942662] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.948460] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.948509] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.948566] pci 0000:00:0e.0: System wakeup disabled by ACPI
[    0.954388] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[    0.954552] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[    0.954660] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[    0.954776] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[    0.954918] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[    0.955043] pci 0000:00:19.0: [1022:1200] type 00 class 0x060000
[    0.955171] pci 0000:00:19.1: [1022:1201] type 00 class 0x060000
[    0.955276] pci 0000:00:19.2: [1022:1202] type 00 class 0x060000
[    0.955402] pci 0000:00:19.3: [1022:1203] type 00 class 0x060000
[    0.955547] pci 0000:00:19.4: [1022:1204] type 00 class 0x060000
[    0.955728] pci 0000:01:04.0: [18ca:0020] type 00 class 0x030000
[    0.955748] pci 0000:01:04.0: reg 0x10: [mem 0xf8000000-0xfbffffff pref]
[    0.955758] pci 0000:01:04.0: reg 0x14: [mem 0xfc000000-0xfc03ffff]
[    0.955765] pci 0000:01:04.0: reg 0x18: [io  0x1000-0x107f]
[    0.955812] pci 0000:01:04.0: supports D1 D2
[    0.955925] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.960967] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    0.960970] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.960973] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    0.961096] pci 0000:02:00.0: [14e4:1659] type 00 class 0x020000
[    0.961136] pci 0000:02:00.0: reg 0x10: [mem 0xfc100000-0xfc10ffff 64bit]
[    0.961171] pci 0000:02:00.0: reg 0x30: [mem 0x68400000-0x6840ffff pref]
[    0.961259] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.961381] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.971500] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.976555] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    0.976665] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.976700] pci 0000:03:00.0: reg 0x10: [mem 0xfc200000-0xfc20ffff 64bit]
[    0.976802] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.976899] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.987025] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.992067] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    0.992152] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.997278] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.002354] pci_bus 0000:00: on NUMA node 0
[    1.002457] ACPI: PCI Interrupt Link [LNKA] (IRQs *16 17 18 19)
[    1.008882] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 *17 18 19)
[    1.015315] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    1.023001] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    1.030661] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    1.038370] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    1.046027] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 21 22 *23)
[    1.052440] ACPI: PCI Interrupt Link [LUEH] (IRQs 20 21 *22 23)
[    1.058881] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 22 23) *0, disabled.
[    1.066552] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    1.074209] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    1.081855] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 *21 22 23)
[    1.088275] ACPI: PCI Interrupt Link [LSA1] (IRQs *20 21 22 23)
[    1.094692] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 23) *0, disabled.
[    1.102356] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *0, disabled.
[    1.110000] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *0, disabled.
[    1.117676] ACPI: PCI Interrupt Link [LKSM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.126779] ACPI: PCI Interrupt Link [LNIA] (IRQs 16) *0, disabled.
[    1.133491] ACPI: PCI Interrupt Link [LNIB] (IRQs 17) *0, disabled.
[    1.140198] ACPI: PCI Interrupt Link [LNIC] (IRQs 18) *0, disabled.
[    1.146914] ACPI: PCI Interrupt Link [LNND] (IRQs 19) *0, disabled.
[    1.153903] ACPI: Enabled 1 GPEs in block 00 to 1F
[    1.159156] vgaarb: setting as boot device: PCI:0000:01:04.0
[    1.164938] vgaarb: device added: PCI:0000:01:04.0,decodes=io+mem,owns=io+mem,locks=none
[    1.173128] vgaarb: loaded
[    1.175930] vgaarb: bridge control possible 0000:01:04.0
[    1.181494] PCI: Using ACPI for IRQ routing
[    1.185781] PCI: pci_cache_line_size set to 64 bytes
[    1.185838] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.185841] e820: reserve RAM buffer [mem 0xdffa9000-0xdfffffff]
[    1.186155] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.193289] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    1.198557] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    1.207285] Switched to clocksource hpet
[    1.222781] pnp: PnP ACPI init
[    1.226001] ACPI: bus type PNP registered
[    1.230634] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.230714] pnp 00:01: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.230811] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230890] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.230931] pnp 00:04: [dma 2]
[    1.230972] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.230994] pnp: PnP ACPI: found 5 devices
[    1.235175] ACPI: bus type PNP unregistered
[    1.247242] pci 0000:02:00.0: can't claim BAR 6 [mem 0x68400000-0x6840ffff pref]: no compatible bridge window
[    1.257307] pci 0000:00:09.0: PCI bridge to [bus 01]
[    1.262360] pci 0000:00:09.0:   bridge window [io  0x1000-0x1fff]
[    1.268543] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    1.275421] pci 0000:00:09.0:   bridge window [mem 0xf8000000-0xfbffffff pref]
[    1.282753] pci 0000:02:00.0: BAR 6: assigned [mem 0xfc110000-0xfc11ffff pref]
[    1.290116] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.295159] pci 0000:00:0b.0:   bridge window [mem 0xfc100000-0xfc1fffff]
[    1.302035] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    1.307080] pci 0000:00:0c.0:   bridge window [mem 0xfc200000-0xfc2fffff]
[    1.313956] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    1.319021] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    1.324073] pci_bus 0000:00: resource 4 [io  0x0d00-0x3fff]
[    1.324075] pci_bus 0000:00: resource 5 [mem 0xf8000000-0xfbffffff]
[    1.324079] pci_bus 0000:00: resource 6 [mem 0xfc000000-0xfc3fffff]
[    1.324081] pci_bus 0000:00: resource 7 [io  0x0000-0x0cf7]
[    1.324084] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    1.324087] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    1.324089] pci_bus 0000:01: resource 2 [mem 0xf8000000-0xfbffffff pref]
[    1.324092] pci_bus 0000:02: resource 1 [mem 0xfc100000-0xfc1fffff]
[    1.324095] pci_bus 0000:03: resource 1 [mem 0xfc200000-0xfc2fffff]
[    1.324236] NET: Registered protocol family 2
[    1.329192] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.336970] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.344391] TCP: Hash tables configured (established 65536 bind 65536)
[    1.351077] TCP: reno registered
[    1.354414] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.360699] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.367584] NET: Registered protocol family 1
[    1.372427] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    1.378625] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    1.384616] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.390227] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.395805] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    1.401458] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.407087] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.412679] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    1.418335] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.423933] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.429518] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    1.435179] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.440778] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.446368] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    1.452010] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    1.457609] pci 0000:01:04.0: Video device with shadowed ROM
[    1.457618] PCI: CLS 64 bytes, default 64
[    1.457727] Unpacking initramfs...
[    1.690793] Freeing initrd memory: 8744K (ffff88007f775000 - ffff88007ffff000)
[    1.698760] PCI-DMA: Disabling AGP.
[    1.703972] PCI-DMA: aperture base @ d4000000 size 65536 KB
[    1.709671] PCI-DMA: using GART IOMMU.
[    1.713506] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.725610] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    1.733959] microcode: CPU0: patch_level=0x01000096
[    1.738959] microcode: CPU1: patch_level=0x01000096
[    1.743975] microcode: CPU2: patch_level=0x01000096
[    1.748986] microcode: CPU3: patch_level=0x01000096
[    1.753999] microcode: CPU4: patch_level=0x01000096
[    1.758996] microcode: CPU5: patch_level=0x01000096
[    1.763996] microcode: CPU6: patch_level=0x01000096
[    1.770099] microcode: CPU7: patch_level=0x01000096
[    1.775188] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.784128] LVT offset 1 assigned for vector 0x400
[    1.789031] IBS: LVT offset 1 assigned
[    1.792904] perf: AMD IBS detected (0x00000007)
[    1.798129] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    1.804606] audit: initializing netlink subsys (disabled)
[    1.810113] audit: type=2000 audit(1429110856.620:1): initialized
[    1.817018] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.823521] zbud: loaded
[    1.826491] VFS: Disk quotas dquot_6.5.2
[    1.830547] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.837189] msgmni has been set to 9941
[    1.841656] alg: No test for stdrng (krng)
[    1.845950] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.853597] io scheduler noop registered
[    1.857623] io scheduler deadline registered
[    1.862054] io scheduler cfq registered (default)
[    1.867069] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[    1.867197] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[    1.867330] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[    1.867452] pcieport 0000:00:0e.0: irq 43 for MSI/MSI-X
[    1.867601] aer 0000:00:0b.0:pcie02: service driver aer loaded
[    1.867629] aer 0000:00:0c.0:pcie02: service driver aer loaded
[    1.867655] aer 0000:00:0d.0:pcie02: service driver aer loaded
[    1.867681] aer 0000:00:0e.0:pcie02: service driver aer loaded
[    1.867701] pcieport 0000:00:0b.0: Signaling PME through PCIe PME interrupt
[    1.874796] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    1.881416] pcie_pme 0000:00:0b.0:pcie01: service driver pcie_pme loaded
[    1.881426] pcieport 0000:00:0c.0: Signaling PME through PCIe PME interrupt
[    1.888468] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    1.895079] pcie_pme 0000:00:0c.0:pcie01: service driver pcie_pme loaded
[    1.895090] pcieport 0000:00:0d.0: Signaling PME through PCIe PME interrupt
[    1.902131] pcie_pme 0000:00:0d.0:pcie01: service driver pcie_pme loaded
[    1.902142] pcieport 0000:00:0e.0: Signaling PME through PCIe PME interrupt
[    1.909184] pcie_pme 0000:00:0e.0:pcie01: service driver pcie_pme loaded
[    1.909223] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.914923] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.921753] GHES: HEST is not enabled!
[    1.925713] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.952511] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.980297] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.988307] Linux agpgart interface v0.103
[    1.992727] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f03:MOU] at 0x60,0x64 irq 1,12
[    2.003274] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.008370] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.013704] mousedev: PS/2 mouse device common for all mice
[    2.019504] rtc_cmos rtc_cmos: RTC can wake from S4
[    2.024718] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    2.031196] rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    2.039153] ledtrig-cpu: registered to indicate activity on CPUs
[    2.045428] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    2.051963] AMD IOMMUv2 functionality not available on this system
[    2.058371] TCP: cubic registered
[    2.061915] NET: Registered protocol family 10
[    2.066882] mip6: Mobile IPv6
[    2.069951] NET: Registered protocol family 17
[    2.074552] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.083346] mpls_gso: MPLS GSO support
[    2.088085] registered taskstats version 1
[    2.093032] rtc_cmos rtc_cmos: setting system clock to 2015-04-15 15:14:18 UTC (1429110858)
[    2.101621] PM: Hibernation image not present or could not be loaded.
[    2.103458] Freeing unused kernel memory: 1204K (ffffffff818ed000 - ffffffff81a1a000)
[    2.111444] Write protecting the kernel read-only data: 8192k
[    2.120758] Freeing unused kernel memory: 928K (ffff880001518000 - ffff880001600000)
[    2.129512] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
[    2.149737] systemd-udevd[99]: starting version 215
[    2.155283] random: systemd-udevd urandom read with 4 bits of entropy available
[    2.178321] ACPI: bus type USB registered
[    2.178373] pps_core: LinuxPPS API ver. 1 registered
[    2.178375] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.196840] usbcore: registered new interface driver usbfs
[    2.202590] usbcore: registered new interface driver hub
[    2.208137] PTP clock support registered
[    2.208226] usbcore: registered new device driver usb
[    2.218702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.225807] tg3.c:v3.137 (May 11, 2014)
[    2.229899] tg3 0000:02:00.0: enabling device (0004 -> 0006)
[    2.230089] ehci-pci: EHCI PCI platform driver
[    2.230351] ehci-pci 0000:00:02.1: EHCI Host Controller
[    2.230367] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.230388] ehci-pci 0000:00:02.1: debug port 1
[    2.230432] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    2.230462] ehci-pci 0000:00:02.1: irq 22, io mem 0xfc303000
[    2.238957] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.239035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.239036] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.239038] usb usb1: Product: EHCI Host Controller
[    2.239039] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
[    2.239040] usb usb1: SerialNumber: 0000:00:02.1
[    2.239258] hub 1-0:1.0: USB hub found
[    2.239266] hub 1-0:1.0: 10 ports detected
[    2.307339] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.307383] ACPI: PCI Interrupt Link [LNIB] enabled at IRQ 17
[    2.320084] ohci-pci: OHCI PCI platform driver
[    2.324850] ohci-pci 0000:00:02.0: OHCI PCI host controller
[    2.330540] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.338090] ohci-pci 0000:00:02.0: irq 23, io mem 0xfc300000
[    2.378096] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:61:a2
[    2.388490] tg3 0000:02:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.398357] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.400959] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.400960] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.400962] usb usb2: Product: OHCI PCI host controller
[    2.400963] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 ohci_hcd
[    2.400964] usb usb2: SerialNumber: 0000:00:02.0
[    2.401269] hub 2-0:1.0: USB hub found
[    2.401281] hub 2-0:1.0: 10 ports detected
[    2.444591] tg3 0000:02:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.451517] tg3 0000:03:00.0: enabling device (0004 -> 0006)
[    2.457433] ACPI: PCI Interrupt Link [LNIA] enabled at IRQ 16
[    2.515448] tg3 0000:03:00.0 eth1: Tigon3 [partno(BCM95721) rev 4201] (PCI Express) MAC address 00:1e:8c:51:63:95
[    2.525886] tg3 0000:03:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.535756] tg3 0000:03:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.543692] tg3 0000:03:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.557128] FS-Cache: Loaded
[    2.564388] RPC: Registered named UNIX socket transport module.
[    2.570983] RPC: Registered udp transport module.
[    2.577066] RPC: Registered tcp transport module.
[    2.583140] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.595731] FS-Cache: Netfs 'nfs' registered for caching
[    2.609452] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[    2.654908] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    2.722781] tsc: Refined TSC clocksource calibration: 1909.787 MHz
[    3.726531] Switched to clocksource tsc
[    4.272513] tg3 0000:02:00.0 eth0: Link is up at 100 Mbps, full duplex
[    4.279175] tg3 0000:02:00.0 eth0: Flow control is on for TX and on for RX
[    4.286189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.112820] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    7.126990] systemd[1]: Detected architecture 'x86-64'.
[    7.291641] random: nonblocking pool is initialized
[    7.342337] systemd[1]: Inserted module 'autofs4'
[    7.349110] systemd[1]: Set hostname to <cb-test-tgt>.
[    7.871696] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[    7.884597] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    7.899982] systemd[1]: Expecting device dev-ttyS0.device...
[    7.913128] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    7.921119] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.928826] systemd[1]: Starting Remote File Systems (Pre).
[    7.945013] systemd[1]: Reached target Remote File Systems (Pre).
[    7.951286] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    7.973081] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.982757] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    7.990972] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    7.999022] systemd[1]: Starting Paths.
[    8.013000] systemd[1]: Reached target Paths.
[    8.017516] systemd[1]: Starting Encrypted Volumes.
[    8.032987] systemd[1]: Reached target Encrypted Volumes.
[    8.038512] systemd[1]: Starting Swap.
[    8.052963] systemd[1]: Reached target Swap.
[    8.057349] systemd[1]: Starting Root Slice.
[    8.080969] systemd[1]: Created slice Root Slice.
[    8.085914] systemd[1]: Starting User and Session Slice.
[    8.100998] systemd[1]: Created slice User and Session Slice.
[    8.106921] systemd[1]: Starting Delayed Shutdown Socket.
[    8.120952] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.126822] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.144975] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.152106] systemd[1]: Starting Journal Socket (/dev/log).
[    8.168942] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.174989] systemd[1]: Starting Syslog Socket.
[    8.188933] systemd[1]: Listening on Syslog Socket.
[    8.195037] systemd[1]: Starting udev Kernel Socket.
[    8.208921] systemd[1]: Listening on udev Kernel Socket.
[    8.214400] systemd[1]: Starting udev Control Socket.
[    8.228907] systemd[1]: Listening on udev Control Socket.
[    8.234430] systemd[1]: Starting Journal Socket.
[    8.248898] systemd[1]: Listening on Journal Socket.
[    8.254012] systemd[1]: Starting Sockets.
[    8.268890] systemd[1]: Reached target Sockets.
[    8.273543] systemd[1]: Starting System Slice.
[    8.288886] systemd[1]: Created slice System Slice.
[    8.293892] systemd[1]: Starting system-getty.slice.
[    8.308890] systemd[1]: Created slice system-getty.slice.
[    8.314435] systemd[1]: Starting system-serial\x2dgetty.slice.
[    8.332884] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    8.339917] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.362019] systemd[1]: Mounting Debug File System...
[    8.593793] systemd[1]: Started Set Up Additional Binary Formats.
[    8.600069] systemd[1]: Mounting Huge Pages File System...
[    8.836494] systemd[1]: Starting Load Kernel Modules...
[    8.854622] systemd[1]: Mounting POSIX Message Queue File System...
[    8.873642] systemd[1]: Starting udev Coldplug all Devices...
[    8.889790] systemd[1]: Starting Journal Service...
[    8.916750] systemd[1]: Started Journal Service.
[    9.351688] systemd-udevd[186]: starting version 215
[    9.635882] systemd-journald[168]: Received request to flush runtime journal from PID 1
[   10.247131] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[   10.255111] k10temp 0000:00:19.3: unreliable CPU thermal sensor; monitoring disabled
[   10.472126] EDAC MC: Ver: 3.0.0
[   10.475877] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[   10.484393] ACPI: Power Button [PWRB]
[   10.488451] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   10.495983] ACPI: Power Button [PWRF]
[   10.515283] SCSI subsystem initialized
[   10.534672] MCE: In-kernel MCE decoding enabled.
[   10.548076] FDC 0 is a post-1991 82077
[   10.628209] w83793 0-002f: Registered watchdog chardev major 10, minor: 130
[   10.635359] i2c i2c-0: nForce2 SMBus adapter at 0x2c80
[   10.762064] libata version 3.00 loaded.
[   10.766264] AMD64 EDAC driver v3.4.0
[   10.770924] acpi-cpufreq: overriding BIOS provided _PSD data
[   10.777578] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   10.887804] kvm: Nested Virtualization enabled
[   10.892364] kvm: Nested Paging enabled
[   13.874937] i2c i2c-1: nForce2 SMBus adapter at 0x2cc0
[   13.880420] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.887391] EDAC amd64: DRAM ECC enabled.
[   13.892187] EDAC amd64: F10h detected (node 0).
[   13.896909] EDAC MC: DCT0 chip selects:
[   13.896912] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.901802] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.906607] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.911413] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.916241] EDAC MC: DCT1 chip selects:
[   13.916243] EDAC amd64: MC: 0:     0MB 1:     0MB
[   13.921057] EDAC amd64: MC: 2:     0MB 3:     0MB
[   13.925837] EDAC amd64: MC: 4:     0MB 5:     0MB
[   13.930639] EDAC amd64: MC: 6:  1024MB 7:  1024MB
[   13.935336] EDAC amd64: using x4 syndromes.
[   13.939653] EDAC amd64: MCT channel count: 2
[   13.944155] EDAC amd64: CS6: Registered DDR2 RAM
[   13.950268] EDAC amd64: CS7: Registered DDR2 RAM
[   13.956559] EDAC MC0: Giving out device to module amd64_edac controller F10h: DEV 0000:00:18.2 (INTERRUPT)
[   13.967396] pata_amd 0000:00:06.0: version 0.4.1
[   13.968148] scsi0 : pata_amd
[   13.971808] scsi1 : pata_amd
[   13.974913] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3020 irq 14
[   13.981977] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3028 irq 15
[   13.989164] sata_nv 0000:00:07.0: version 3.5
[   13.989553] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[   13.996132] scsi2 : sata_nv
[   13.999403] scsi3 : sata_nv
[   14.002374] ata3: SATA max UDMA/133 cmd 0x3050 ctl 0x3070 bmdma 0x3030 irq 21
[   14.009631] ata4: SATA max UDMA/133 cmd 0x3058 ctl 0x3074 bmdma 0x3038 irq 21
[   14.017113] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[   14.023416] scsi4 : sata_nv
[   14.026488] scsi5 : sata_nv
[   14.029448] ata5: SATA max UDMA/133 cmd 0x3060 ctl 0x3078 bmdma 0x3040 irq 20
[   14.036690] ata6: SATA max UDMA/133 cmd 0x3068 ctl 0x307c bmdma 0x3048 irq 20
[   14.044040] EDAC amd64: DRAM ECC enabled.
[   14.048230] EDAC amd64: F10h detected (node 1).
[   14.052919] EDAC MC: DCT0 chip selects:
[   14.052923] EDAC amd64: MC: 0:  1024MB 1:     0MB
[   14.057733] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.062546] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.067356] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.072163] EDAC MC: DCT1 chip selects:
[   14.072165] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.076970] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.081778] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.086580] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.091385] EDAC amd64: using x4 syndromes.
[   14.095675] EDAC amd64: MCT channel count: 1
[   14.100091] EDAC amd64: CS0: Registered DDR2 RAM
[   14.105071] EDAC MC1: Giving out device to module amd64_edac controller F10h: DEV 0000:00:19.2 (INTERRUPT)
[   14.115022] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   14.326779] ata3: SATA link down (SStatus 0 SControl 300)
[   14.354769] ata5: SATA link down (SStatus 0 SControl 300)
[   14.642658] ata4: SATA link down (SStatus 0 SControl 300)
[   14.958547] ata6: SATA link down (SStatus 0 SControl 300)
[   42.099357] *****RAPTOR ENGINEERING AUTOMATED TEST BOOT SUCCESS*****