[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000c0000-0x000000003ffcffff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd0000-0x000000003fffffff] type 16
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: ASUS A8N-E, BIOS 4.0-5356-g63e35f2 01/26/2014
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-back
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [ffff8800000f0400]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x3ffcffff]
[    0.000000]  [mem 0x00000000-0x3fdfffff] page 2M
[    0.000000]  [mem 0x3fe00000-0x3ffcffff] page 4k
[    0.000000] kernel direct mapping tables up to 0x3ffcffff @ [mem 0x1fffd000-0x1fffffff]
[    0.000000] RAMDISK: [mem 0x35fea000-0x36fecfff]
[    0.000000] ACPI: RSDP 00000000000f0800 00014 (v00 CORE  )
[    0.000000] ACPI: RSDT 000000003ffe2630 00040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: FACP 000000003ffe3e10 00074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: DSDT 000000003ffe2740 016CC (v01 CORE   CB-DSDT  00000001 INTL 20131218)
[    0.000000] ACPI: FACS 000000003ffe2700 00040
[    0.000000] ACPI: MCFG 000000003ffe3f10 0002C (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: HPET 000000003ffe3f40 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: APIC 000000003ffe3f80 0005A (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SRAT 000000003ffe3fe0 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SLIT 000000003ffe4070 0002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
[    0.000000] ACPI: SSDT 000000003ffe40a0 00166 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x3fffffff]
[    0.000000] NUMA: Initialized distance table, cnt=1
[    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x3ffcffff] -> [mem 0x00000000-0x3ffcffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x3ffcffff]
[    0.000000]   NODE_DATA [mem 0x3ffca000-0x3ffcefff]
[    0.000000]  [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009ffff]
[    0.000000]   node   0: [mem 0x00100000-0x3ffcffff]
[    0.000000] On node 0 totalpages: 261984
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 7 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 4032 pages used for memmap
[    0.000000]   DMA32 zone: 253968 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[    0.000000] e820: [mem 0x40000000-0xffffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003fc00000 s85056 r8192 d21440 u2097152
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 257881
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Node 0: aperture @ f8000000 size 64 MB
[    0.000000] Memory: 999224k/1048384k available (7006k kernel code, 448k absent, 48712k reserved, 6238k data, 992k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16640 nr_irqs:256 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2010.140 MHz processor
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.28 BogoMIPS (lpj=8040560)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004061] Security Framework initialized
[    0.004089] AppArmor: AppArmor initialized
[    0.004093] Yama: becoming mindful.
[    0.004296] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.005466] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.006039] Mount-cache hash table entries: 256
[    0.008017] spurious 8259A interrupt: IRQ7.
[    0.008070] Initializing cgroup subsys cpuacct
[    0.008078] Initializing cgroup subsys memory
[    0.008098] Initializing cgroup subsys devices
[    0.008104] Initializing cgroup subsys freezer
[    0.008110] Initializing cgroup subsys blkio
[    0.008115] Initializing cgroup subsys perf_event
[    0.008123] Initializing cgroup subsys hugetlb
[    0.008165] tseg: 0000000000
[    0.008189] mce: CPU supports 5 MCE banks
[    0.008211] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.008211] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.008211] tlb_flushall_shift: 4
[    0.015616] Freeing SMP alternatives: 24k freed
[    0.017840] ACPI: Core revision 20121018
[    0.018746] ftrace: allocating 26690 entries in 105 pages
[    0.036384] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.040000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.040000] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.040000] ..... (found apic 0 pin 0) ...
[    0.079782] ....... works.
[    0.079786] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3200+ (fam: 0f, model: 1f, stepping: 00)
[    0.080000] Performance Events: AMD PMU driver.
[    0.080000] ... version:                0
[    0.080000] ... bit width:              48
[    0.080000] ... generic registers:      4
[    0.080000] ... value mask:             0000ffffffffffff
[    0.080000] ... max period:             00007fffffffffff
[    0.080000] ... fixed-purpose events:   0
[    0.080000] ... event mask:             000000000000000f
[    0.080000] Brought up 1 CPUs
[    0.080000] smpboot: Total of 1 processors activated (4020.28 BogoMIPS)
[    0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.080000] devtmpfs: initialized
[    0.080212] EVM: security.selinux
[    0.080216] EVM: security.SMACK64
[    0.080219] EVM: security.capability
[    0.081836] regulator-dummy: no parameters
[    0.081923] NET: Registered protocol family 16
[    0.082077] node 0 link 0: io port [1000, 2fff]
[    0.082080] TOM: 0000000040000000 aka 1024M
[    0.082087] node 0 link 0: mmio [fc000000, fc1fffff]
[    0.082092] bus: [bus 00-05] on node 0 link 0
[    0.082094] bus: 00 [io  0x0000-0xffff]
[    0.082096] bus: 00 [mem 0x40000000-0xfcffffffff]
[    0.082155] ACPI: bus type pci registered
[    0.082225] PCI: MMCONFIG has no entries
[    0.082230] PCI: Using configuration type 1 for base access
[    0.083427] bio: create slab <bio-0> at 0
[    0.083571] ACPI: Added _OSI(Module Device)
[    0.083577] ACPI: Added _OSI(Processor Device)
[    0.083582] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.083588] ACPI: Added _OSI(Processor Aggregator Device)
[    0.083903] ACPI: EC: Look up EC in DSDT
[    0.084855] ACPI: Interpreter enabled
[    0.084863] ACPI: (supports S0 S5)
[    0.084878] ACPI: Using IOAPIC for interrupt routing
[    0.084902] PCI: MMCONFIG has no entries
[    0.086397] ACPI: No dock devices found.
[    0.086406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.087539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
[    0.087547] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.089859] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.089903] PCI host bridge to bus 0000:00
[    0.089911] pci_bus 0000:00: root bus resource [bus 00-05]
[    0.089918] pci_bus 0000:00: root bus resource [io  0x0d00-0x2fff]
[    0.089925] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfc1fffff]
[    0.089933] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.089953] pci 0000:00:00.0: [10de:005e] type 00 class 0x058000
[    0.090030] pci 0000:00:01.0: [10de:0050] type 00 class 0x060100
[    0.090037] pci 0000:00:01.0: reg 10: [io  0x2400-0x247f]
[    0.090069] pci 0000:00:01.1: [10de:0052] type 00 class 0x0c0500
[    0.090077] pci 0000:00:01.1: reg 10: [io  0x2800-0x281f]
[    0.090090] pci 0000:00:01.1: reg 20: [io  0x2480-0x24bf]
[    0.090095] pci 0000:00:01.1: reg 24: [io  0x24c0-0x24ff]
[    0.090110] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.090128] pci 0000:00:02.0: [10de:005a] type 00 class 0x0c0310
[    0.090136] pci 0000:00:02.0: reg 10: [mem 0xfc100000-0xfc100fff]
[    0.090162] pci 0000:00:02.0: supports D1 D2
[    0.090165] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090179] pci 0000:00:02.1: [10de:005b] type 00 class 0x0c0320
[    0.090188] pci 0000:00:02.1: reg 10: [mem 0xfc105000-0xfc1050ff]
[    0.090219] pci 0000:00:02.1: supports D1 D2
[    0.090222] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090241] pci 0000:00:04.0: [10de:0059] type 00 class 0x040100
[    0.090249] pci 0000:00:04.0: reg 10: [io  0x1c00-0x1cff]
[    0.090254] pci 0000:00:04.0: reg 14: [io  0x2000-0x20ff]
[    0.090259] pci 0000:00:04.0: reg 18: [mem 0xfc101000-0xfc101fff]
[    0.090281] pci 0000:00:04.0: supports D1 D2
[    0.090293] pci 0000:00:06.0: [10de:0053] type 00 class 0x01018a
[    0.090310] pci 0000:00:06.0: reg 20: [io  0x2820-0x282f]
[    0.090336] pci 0000:00:07.0: [10de:0054] type 00 class 0x010185
[    0.090344] pci 0000:00:07.0: reg 10: [io  0x2850-0x2857]
[    0.090349] pci 0000:00:07.0: reg 14: [io  0x2878-0x287b]
[    0.090354] pci 0000:00:07.0: reg 18: [io  0x2858-0x285f]
[    0.090359] pci 0000:00:07.0: reg 1c: [io  0x287c-0x287f]
[    0.090365] pci 0000:00:07.0: reg 20: [io  0x2830-0x283f]
[    0.090370] pci 0000:00:07.0: reg 24: [mem 0xfc102000-0xfc102fff]
[    0.090393] pci 0000:00:08.0: [10de:0055] type 00 class 0x010185
[    0.090401] pci 0000:00:08.0: reg 10: [io  0x2860-0x2867]
[    0.090406] pci 0000:00:08.0: reg 14: [io  0x2880-0x2883]
[    0.090411] pci 0000:00:08.0: reg 18: [io  0x2868-0x286f]
[    0.090416] pci 0000:00:08.0: reg 1c: [io  0x2884-0x2887]
[    0.090421] pci 0000:00:08.0: reg 20: [io  0x2840-0x284f]
[    0.090427] pci 0000:00:08.0: reg 24: [mem 0xfc103000-0xfc103fff]
[    0.090449] pci 0000:00:09.0: [10de:005c] type 01 class 0x060401
[    0.090480] pci 0000:00:0a.0: [10de:0057] type 00 class 0x068000
[    0.090489] pci 0000:00:0a.0: reg 10: [mem 0xfc104000-0xfc104fff]
[    0.090494] pci 0000:00:0a.0: reg 14: [io  0x2870-0x2877]
[    0.090524] pci 0000:00:0a.0: supports D1 D2
[    0.090526] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090542] pci 0000:00:0b.0: [10de:005d] type 01 class 0x060400
[    0.090569] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090584] pci 0000:00:0c.0: [10de:005d] type 01 class 0x060400
[    0.090611] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090626] pci 0000:00:0d.0: [10de:005d] type 01 class 0x060400
[    0.090652] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090667] pci 0000:00:0e.0: [10de:005d] type 01 class 0x060400
[    0.090693] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.090713] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[    0.090734] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[    0.090752] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[    0.090773] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[    0.090814] pci 0000:01:06.0: [1033:0035] type 00 class 0x0c0310
[    0.090826] pci 0000:01:06.0: reg 10: [mem 0xfc000000-0xfc000fff]
[    0.090868] pci 0000:01:06.0: supports D1 D2
[    0.090871] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
[    0.090887] pci 0000:01:06.1: [1033:0035] type 00 class 0x0c0310
[    0.090898] pci 0000:01:06.1: reg 10: [mem 0xfc001000-0xfc001fff]
[    0.090940] pci 0000:01:06.1: supports D1 D2
[    0.090942] pci 0000:01:06.1: PME# supported from D0 D1 D2 D3hot
[    0.090958] pci 0000:01:06.2: [1033:00e0] type 00 class 0x0c0320
[    0.090969] pci 0000:01:06.2: reg 10: [mem 0xfc002000-0xfc0020ff]
[    0.091011] pci 0000:01:06.2: supports D1 D2
[    0.091014] pci 0000:01:06.2: PME# supported from D0 D1 D2 D3hot
[    0.091043] pci 0000:00:09.0: PCI bridge to [bus 01] (subtractive decode)
[    0.091052] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.091057] pci 0000:00:09.0:   bridge window [io  0x0d00-0x2fff] (subtractive decode)
[    0.091060] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc1fffff] (subtractive decode)
[    0.091062] pci 0000:00:09.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.091083] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.091109] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.091135] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.091160] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.091189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIC._PRT]
[    0.091215]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.091224]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.092360] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.092438] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[    0.092513] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.092587] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.092661] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
[    0.092739] ACPI: PCI Interrupt Link [LLAS] (IRQs 20 21 22 23) *0, disabled.
[    0.092814] ACPI: PCI Interrupt Link [LUOH] (IRQs 20 *21 22 23)
[    0.092875] ACPI: PCI Interrupt Link [LUEH] (IRQs *20 21 22 23)
[    0.092944] ACPI: PCI Interrupt Link [LAUD] (IRQs 20 21 *22 23)
[    0.093022] ACPI: PCI Interrupt Link [LMOD] (IRQs 20 21 22 23) *0, disabled.
[    0.093096] ACPI: PCI Interrupt Link [LPA0] (IRQs 20 21 22 23) *0, disabled.
[    0.093175] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 *23)
[    0.093248] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 *22 23)
[    0.093325] ACPI: PCI Interrupt Link [LEMA] (IRQs 20 21 22 *23)
[    0.093505] vgaarb: loaded
[    0.093791] SCSI subsystem initialized
[    0.093797] ACPI: bus type scsi registered
[    0.093891] libata version 3.00 loaded.
[    0.093918] ACPI: bus type usb registered
[    0.093954] usbcore: registered new interface driver usbfs
[    0.093968] usbcore: registered new interface driver hub
[    0.094004] usbcore: registered new device driver usb
[    0.094133] PCI: Using ACPI for IRQ routing
[    0.094141] PCI: pci_cache_line_size set to 64 bytes
[    0.094195] e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff]
[    0.094345] NetLabel: Initializing
[    0.094351] NetLabel:  domain hash size = 128
[    0.094355] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.094377] NetLabel:  unlabeled traffic allowed by default
[    0.094455] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.094464] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.094471] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.096072] Switching to clocksource hpet
[    0.106442] AppArmor: AppArmor Filesystem Enabled
[    0.106515] pnp: PnP ACPI init
[    0.106548] ACPI: bus type pnp registered
[    0.106859] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.106912] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.106958] pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.106989] pnp 00:03: [dma 2]
[    0.107009] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.107014] pnp: PnP ACPI: found 4 devices
[    0.107020] ACPI: ACPI bus type pnp unregistered
[    0.113398] pci 0000:00:09.0: PCI bridge to [bus 01]
[    0.113412] pci 0000:00:09.0:   bridge window [mem 0xfc000000-0xfc0fffff]
[    0.113419] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.113427] pci 0000:00:0c.0: PCI bridge to [bus 03]
[    0.113434] pci 0000:00:0d.0: PCI bridge to [bus 04]
[    0.113441] pci 0000:00:0e.0: PCI bridge to [bus 05]
[    0.113457] pci 0000:00:09.0: setting latency timer to 64
[    0.113467] pci_bus 0000:00: resource 4 [io  0x0d00-0x2fff]
[    0.113470] pci_bus 0000:00: resource 5 [mem 0xfc000000-0xfc1fffff]
[    0.113473] pci_bus 0000:00: resource 6 [io  0x0000-0x0cf7]
[    0.113476] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc0fffff]
[    0.113479] pci_bus 0000:01: resource 4 [io  0x0d00-0x2fff]
[    0.113481] pci_bus 0000:01: resource 5 [mem 0xfc000000-0xfc1fffff]
[    0.113484] pci_bus 0000:01: resource 6 [io  0x0000-0x0cf7]
[    0.113559] NET: Registered protocol family 2
[    0.113775] TCP established hash table entries: 8192 (order: 5, 131072 bytes)
[    0.113928] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.114052] TCP: Hash tables configured (established 8192 bind 8192)
[    0.114174] TCP: reno registered
[    0.114181] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.114206] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.114306] NET: Registered protocol family 1
[    0.114559] ACPI: PCI Interrupt Link [LUOH] enabled at IRQ 21
[    0.114691] ACPI: PCI Interrupt Link [LUEH] enabled at IRQ 20
[    0.114752] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.114761] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.114796] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.114806] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.114844] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.114853] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.114863] pci 0000:00:0b.0: Found enabled HT MSI Mapping
[    0.114905] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.114914] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.114925] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[    0.114969] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.114978] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.114989] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[    0.115036] pci 0000:00:00.0: Found disabled HT MSI Mapping
[    0.115045] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.115055] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[    0.115184] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[    0.115300] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[    0.115408] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
[    0.115431] PCI: CLS 64 bytes, default 64
[    0.115516] Trying to unpack rootfs image as initramfs...
[    0.524283] Freeing initrd memory: 16396k freed
[    0.542747] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.543058] Initialise module verification
[    0.543128] audit: initializing netlink socket (disabled)
[    0.543154] type=2000 audit(1390755856.540:1): initialized
[    0.579736] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.581976] VFS: Disk quotas dquot_6.5.2
[    0.582059] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.582843] fuse init (API version 7.20)
[    0.582952] msgmni has been set to 1983
[    0.583389] Key type asymmetric registered
[    0.583394] Asymmetric key parser 'x509' registered
[    0.583446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.583485] io scheduler noop registered
[    0.583490] io scheduler deadline registered (default)
[    0.583498] io scheduler cfq registered
[    0.583747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.583772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.583920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.583932] ACPI: Power Button [PWRF]
[    0.585106] GHES: HEST is not enabled!
[    0.585222] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.605558] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.607055] Linux agpgart interface v0.103
[    0.608807] brd: module loaded
[    0.609712] loop: module loaded
[    0.610280] libphy: Fixed MDIO Bus: probed
[    0.610367] tun: Universal TUN/TAP device driver, 1.6
[    0.610373] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.610430] PPP generic driver version 2.4.2
[    0.610485] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.610492] ehci-pci: EHCI PCI platform driver
[    0.610555] ehci-pci 0000:00:02.1: setting latency timer to 64
[    0.610559] ehci-pci 0000:00:02.1: EHCI Host Controller
[    0.610572] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.610591] ehci-pci 0000:00:02.1: debug port 1
[    0.610624] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[    0.610659] ehci-pci 0000:00:02.1: irq 20, io mem 0xfc105000
[    0.620027] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.620080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.620089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.620097] usb usb1: Product: EHCI Host Controller
[    0.620103] usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
[    0.620111] usb usb1: SerialNumber: 0000:00:02.1
[    0.620231] hub 1-0:1.0: USB hub found
[    0.620241] hub 1-0:1.0: 10 ports detected
[    0.620456] ehci-pci 0000:01:06.2: EHCI Host Controller
[    0.620466] ehci-pci 0000:01:06.2: new USB bus registered, assigned bus number 2
[    0.620514] ehci-pci 0000:01:06.2: irq 17, io mem 0xfc002000
[    0.632014] ehci-pci 0000:01:06.2: USB 2.0 started, EHCI 1.00
[    0.632040] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.632049] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.632057] usb usb2: Product: EHCI Host Controller
[    0.632063] usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
[    0.632070] usb usb2: SerialNumber: 0000:01:06.2
[    0.632171] hub 2-0:1.0: USB hub found
[    0.632178] hub 2-0:1.0: 5 ports detected
[    0.632322] ehci-platform: EHCI generic platform driver
[    0.632338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.632370] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.632374] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.632388] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    0.632422] ohci_hcd 0000:00:02.0: irq 21, io mem 0xfc100000
[    0.690010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.690019] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.690027] usb usb3: Product: OHCI Host Controller
[    0.690033] usb usb3: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
[    0.690040] usb usb3: SerialNumber: 0000:00:02.0
[    0.690145] hub 3-0:1.0: USB hub found
[    0.690154] hub 3-0:1.0: 10 ports detected
[    0.690334] ohci_hcd 0000:01:06.0: OHCI Host Controller
[    0.690344] ohci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 4
[    0.690374] ohci_hcd 0000:01:06.0: irq 19, io mem 0xfc000000
[    0.773788] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.773797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.773805] usb usb4: Product: OHCI Host Controller
[    0.773811] usb usb4: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
[    0.773818] usb usb4: SerialNumber: 0000:01:06.0
[    0.773915] hub 4-0:1.0: USB hub found
[    0.773930] hub 4-0:1.0: 3 ports detected
[    0.774037] ohci_hcd 0000:01:06.1: OHCI Host Controller
[    0.774047] ohci_hcd 0000:01:06.1: new USB bus registered, assigned bus number 5
[    0.774077] ohci_hcd 0000:01:06.1: irq 18, io mem 0xfc001000
[    0.857782] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.857789] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.857794] usb usb5: Product: OHCI Host Controller
[    0.857799] usb usb5: Manufacturer: Linux 3.8.0-21-generic ohci_hcd
[    0.857804] usb usb5: SerialNumber: 0000:01:06.1
[    0.857897] hub 5-0:1.0: USB hub found
[    0.857906] hub 5-0:1.0: 2 ports detected
[    0.857995] uhci_hcd: USB Universal Host Controller Interface driver
[    0.858086] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.860708] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.860717] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.860809] mousedev: PS/2 mouse device common for all mice
[    0.860910] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.881191] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.881222] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.881362] device-mapper: uevent: version 1.0.3
[    0.881445] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.881464] cpuidle: using governor ladder
[    0.881469] cpuidle: using governor menu
[    0.881475] ledtrig-cpu: registered to indicate activity on CPUs
[    0.881482] EFI Variables Facility v0.08 2004-May-17
[    0.881762] ashmem: initialized
[    0.881916] TCP: cubic registered
[    0.882045] NET: Registered protocol family 10
[    0.882309] NET: Registered protocol family 17
[    0.882329] Key type dns_resolver registered
[    0.882532] Loading module verification certificates
[    0.883936] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea'
[    0.883970] registered taskstats version 1
[    0.887556] Key type trusted registered
[    0.890770] Key type encrypted registered
[    0.894273] rtc_cmos rtc_cmos: setting system clock to 2014-01-26 17:04:18 UTC (1390755858)
[    0.894555] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[    0.894561] powernow-k8: Make sure that your BIOS is up to date and Cool'N'Quiet support is enabled in BIOS setup
[    0.894591] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.894595] EDD information not available.
[    0.896833] Freeing unused kernel memory: 992k freed
[    0.897735] Write protecting the kernel read-only data: 12288k
[    0.902561] Freeing unused kernel memory: 1176k freed
[    0.904044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.909525] Freeing unused kernel memory: 1080k freed
[    0.934680] udevd[88]: starting version 175
[    0.936095] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.069567] usb 1-3: New USB device found, idVendor=0525, idProduct=127a
[    1.069585] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.069591] usb 1-3: Product: Ajays USB 2.0 Debug Cable
[    1.069595] usb 1-3: Manufacturer: Ajays Technology
[    1.069600] usb 1-3: SerialNumber: Ajays002
[    1.102986] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.116072] forcedeth 0000:00:0a.0: enabling device (0000 -> 0003)
[    1.116279] ACPI: PCI Interrupt Link [LEMA] enabled at IRQ 23
[    1.116316] forcedeth 0000:00:0a.0: setting latency timer to 64
[    1.118577] Disabling lock debugging due to kernel taint
[    1.163973] FDC 0 is a post-1991 82077
[    1.180092] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    1.323972] usb 2-2: New USB device found, idVendor=13fe, idProduct=4100
[    1.323987] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.323993] usb 2-2: Product: USB DISK 2.0
[    1.323998] usb 2-2: Manufacturer:         
[    1.324009] usb 2-2: SerialNumber: 0701392CAF3D5516
[    1.328613] Initializing USB Mass Storage driver...
[    1.328800] scsi0 : usb-storage 2-2:1.0
[    1.329152] usbcore: registered new interface driver usb-storage
[    1.329159] USB Mass Storage support registered.
[    1.540027] tsc: Refined TSC clocksource calibration: 2010.302 MHz
[    1.540045] Switching to clocksource tsc
[    1.640521] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 66:32:54:81:e0:00
[    1.640530] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    1.641047] pata_amd 0000:00:06.0: version 0.4.1
[    1.641106] pata_amd 0000:00:06.0: setting latency timer to 64
[    1.642374] scsi1 : pata_amd
[    1.642539] scsi2 : pata_amd
[    1.642586] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2820 irq 14
[    1.642592] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2828 irq 15
[    1.644287] sata_nv 0000:00:07.0: version 3.5
[    1.644482] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
[    1.644577] sata_nv 0000:00:07.0: setting latency timer to 64
[    1.645830] scsi3 : sata_nv
[    1.646024] scsi4 : sata_nv
[    1.646071] ata3: SATA max UDMA/133 cmd 0x2850 ctl 0x2878 bmdma 0x2830 irq 22
[    1.646078] ata4: SATA max UDMA/133 cmd 0x2858 ctl 0x287c bmdma 0x2838 irq 22
[    1.646320] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[    1.646392] sata_nv 0000:00:08.0: setting latency timer to 64
[    1.646768] scsi5 : sata_nv
[    1.646885] scsi6 : sata_nv
[    1.646934] ata5: SATA max UDMA/133 cmd 0x2860 ctl 0x2880 bmdma 0x2840 irq 22
[    1.646939] ata6: SATA max UDMA/133 cmd 0x2868 ctl 0x2884 bmdma 0x2848 irq 22
[    1.956016] ata3: SATA link down (SStatus 0 SControl 300)
[    2.120014] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.128267] ata5.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
[    2.128274] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.144241] ata5.00: configured for UDMA/133
[    2.284008] ata4: SATA link down (SStatus 0 SControl 300)
[    2.284180] scsi 5:0:0:0: Direct-Access     ATA      HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
[    2.285455] sd 5:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    2.285468] sd 5:0:0:0: [sda] 4096-byte physical blocks
[    2.285522] sd 5:0:0:0: [sda] Write Protect is off
[    2.285528] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.285552] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.285895] sd 5:0:0:0: Attached scsi generic sg0 type 0
[    2.330313] scsi 0:0:0:0: Direct-Access              USB DISK 2.0     PMAP PQ: 0 ANSI: 4
[    2.331090] sd 0:0:0:0: Attached scsi generic sg1 type 0
[    2.356061]  sda: sda1 sda2 sda3 sda4 sda5
[    2.356565] sd 5:0:0:0: [sda] Attached SCSI disk
[    2.596067] ata6: SATA link down (SStatus 0 SControl 300)
[    2.666753] EXT4-fs (sda4): INFO: recovery required on readonly filesystem
[    2.666770] EXT4-fs (sda4): write access will be enabled during recovery
[    3.000039] EXT4-fs (sda4): recovery complete
[    3.008251] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    6.369342] sd 0:0:0:0: [sdb] 60604416 512-byte logical blocks: (31.0 GB/28.8 GiB)
[    6.371701] sd 0:0:0:0: [sdb] Write Protect is off
[    6.371708] sd 0:0:0:0: [sdb] Mode Sense: 23 00 00 00
[    6.373452] sd 0:0:0:0: [sdb] No Caching mode page present
[    6.373458] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    6.382451] sd 0:0:0:0: [sdb] No Caching mode page present
[    6.382457] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    6.385717]  sdb: sdb1
[    6.393076] sd 0:0:0:0: [sdb] No Caching mode page present
[    6.393083] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[    6.393088] sd 0:0:0:0: [sdb] Attached SCSI removable disk
[    7.306249] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.368985] udevd[318]: starting version 175
[    7.489524] lp: driver loaded but no devices found
[    7.637761] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[    7.759956] i2c i2c-0: nForce2 SMBus adapter at 0x2480
[    7.759985] i2c i2c-1: nForce2 SMBus adapter at 0x24c0
[    7.952492] parport_pc 00:02: reported by Plug and Play ACPI
[    7.952521] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[    8.097305] lp0: using parport0 (interrupt-driven).
[    8.437393] type=1400 audit(1390755866.040:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=569 comm="apparmor_parser"
[    8.445613] type=1400 audit(1390755866.048:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=569 comm="apparmor_parser"
[    8.445953] type=1400 audit(1390755866.048:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=569 comm="apparmor_parser"
[    8.525645] Bluetooth: Core ver 2.16
[    8.525690] NET: Registered protocol family 31
[    8.525693] Bluetooth: HCI device and connection manager initialized
[    8.525707] Bluetooth: HCI socket layer initialized
[    8.525711] Bluetooth: L2CAP socket layer initialized
[    8.525728] Bluetooth: SCO socket layer initialized
[    8.566350] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    8.566358] Bluetooth: BNEP filters: protocol multicast
[    8.566375] Bluetooth: BNEP socket layer initialized
[    8.576808] Bluetooth: RFCOMM TTY layer initialized
[    8.576831] Bluetooth: RFCOMM socket layer initialized
[    8.576833] Bluetooth: RFCOMM ver 1.11
[    8.648851] usbcore: registered new interface driver usbserial
[    8.655854] usbcore: registered new interface driver usbserial_generic
[    8.670631] usbserial: USB Serial support registered for generic
[    8.699713] init: avahi-cups-reload main process (593) terminated with status 1
[    8.734543] usbcore: registered new interface driver usb_debug
[    8.735765] usbserial: USB Serial support registered for debug
[    8.735800] usb_debug 1-3:1.0: debug converter detected
[    8.736522] ppdev: user-space parallel port driver
[    8.742872] MCE: In-kernel MCE decoding enabled.
[    8.748121] usb 1-3: debug converter now attached to ttyUSB0
[    8.773991] type=1400 audit(1390755866.376:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser"
[    8.779938] type=1400 audit(1390755866.380:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=608 comm="apparmor_parser"
[    8.813234] EDAC MC: Ver: 3.0.0
[    8.850893] AMD64 EDAC driver v3.4.0
[    8.850961] EDAC amd64: DRAM ECC disabled.
[    8.850966] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    8.850966]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    8.850966]  (Note that use of the override may cause unknown side effects.)
[    8.970227] microcode: AMD CPU family 0xf not supported
[    9.226699] ACPI: PCI Interrupt Link [LAUD] enabled at IRQ 23
[    9.226741] snd_intel8x0 0000:00:04.0: setting latency timer to 64
[    9.572052] intel8x0_measure_ac97_clock: measured 53465 usecs (2624 samples)
[    9.572058] intel8x0: clocking to 46945
[    9.784250] init: failsafe main process (699) killed by TERM signal
[    9.966037] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[   10.206112] type=1400 audit(1390755867.808:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=814 comm="apparmor_parser"
[   10.206587] type=1400 audit(1390755867.808:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=814 comm="apparmor_parser"
[   10.227395] type=1400 audit(1390755867.828:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=817 comm="apparmor_parser"
[   10.227862] type=1400 audit(1390755867.828:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=817 comm="apparmor_parser"
[   10.243665] type=1400 audit(1390755867.844:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=818 comm="apparmor_parser"
[   11.484545] init: udev-fallback-graphics main process (975) terminated with status 1
[   11.877024] init: plymouth-splash main process (1079) terminated with status 1
[   12.626135] init: lightdm main process (982) terminated with status 1
[   12.644473] init: plymouth-ready (startup) main process (230) terminated with status 1
[   12.686103] init: plymouth-stop pre-start process (1312) terminated with status 1
[   31.560111] init: failsafe-x main process (1525) terminated with status 1