amd/olivehillplus/4.0-6958-gea8f3b4/2014-09-24T05:58:25Z
[board-status.git] / samsung / lumpy / 4.0-6145-gdfdf001-dirty / 2014-05-25T11:54:59Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Initializing cgroup subsys cpuacct
4 [    0.000000] Linux version 3.12.3 (km@idefix) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #2 SMP Fri Dec 27 03:18:56 EET 2013
5 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12.3 root=UUID=a48f9648-a47c-49ae-b8ec-9222179de834 ro quiet splash vt.handoff=7
6 [    0.000000] KERNEL supported cpus:
7 [    0.000000]   Intel GenuineIntel
8 [    0.000000]   AMD AuthenticAMD
9 [    0.000000]   Centaur CentaurHauls
10 [    0.000000] e820: BIOS-provided physical RAM map:
11 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
12 [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
13 [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
14 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
15 [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
16 [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
17 [    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
18 [    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable
19 [    0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000af9fffff] reserved
20 [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
21 [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014fdfffff] usable
22 [    0.000000] NX (Execute Disable) protection: active
23 [    0.000000] SMBIOS 2.7 present.
24 [    0.000000] DMI: SAMSUNG Lumpy/Lumpy, BIOS 4.0-6145-gdfdf001 05/25/2014
25 [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
26 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
27 [    0.000000] No AGP bridge found
28 [    0.000000] e820: last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
29 [    0.000000] MTRR default type: write-back
30 [    0.000000] MTRR fixed ranges enabled:
31 [    0.000000]   00000-9FFFF write-back
32 [    0.000000]   A0000-BFFFF uncachable
33 [    0.000000]   C0000-FFFFF write-back
34 [    0.000000] MTRR variable ranges enabled:
35 [    0.000000]   0 base 0AD000000 mask FFF000000 uncachable
36 [    0.000000]   1 base 0AE000000 mask FFE000000 uncachable
37 [    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
38 [    0.000000]   3 base 0C0000000 mask FF0000000 uncachable
39 [    0.000000]   4 base 0D0000000 mask FF0000000 write-combining
40 [    0.000000]   5 base 0E0000000 mask FE0000000 uncachable
41 [    0.000000]   6 disabled
42 [    0.000000]   7 disabled
43 [    0.000000]   8 disabled
44 [    0.000000]   9 disabled
45 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
46 [    0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000
47 [    0.000000] found SMP MP-table at [mem 0x000fda40-0x000fda4f] mapped at [ffff8800000fda40]
48 [    0.000000] Scanning 1 areas for low memory corruption
49 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
50 [    0.000000] reserving inaccessible SNB gfx pages
51 [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
52 [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
53 [    0.000000] BRK [0x01f5a000, 0x01f5afff] PGTABLE
54 [    0.000000] BRK [0x01f5b000, 0x01f5bfff] PGTABLE
55 [    0.000000] BRK [0x01f5c000, 0x01f5cfff] PGTABLE
56 [    0.000000] init_memory_mapping: [mem 0x14fc00000-0x14fdfffff]
57 [    0.000000]  [mem 0x14fc00000-0x14fdfffff] page 2M
58 [    0.000000] BRK [0x01f5d000, 0x01f5dfff] PGTABLE
59 [    0.000000] init_memory_mapping: [mem 0x14c000000-0x14fbfffff]
60 [    0.000000]  [mem 0x14c000000-0x14fbfffff] page 2M
61 [    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
62 [    0.000000]  [mem 0x100000000-0x14bffffff] page 2M
63 [    0.000000] BRK [0x01f5e000, 0x01f5efff] PGTABLE
64 [    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
65 [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
66 [    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
67 [    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
68 [    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
69 [    0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff]
70 [    0.000000]  [mem 0x40200000-0xacdfffff] page 2M
71 [    0.000000]  [mem 0xace00000-0xacecffff] page 4k
72 [    0.000000] BRK [0x01f5f000, 0x01f5ffff] PGTABLE
73 [    0.000000] RAMDISK: [mem 0x35138000-0x36893fff]
74 [    0.000000] ACPI: RSDP 00000000000fda10 00024 (v02 CORE  )
75 [    0.000000] ACPI: XSDT 00000000acee26e0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
76 [    0.000000] ACPI: FACP 00000000acee6090 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
77 [    0.000000] ACPI: DSDT 00000000acee2850 03835 (v02 COREv4 COREBOOT 20110725 INTL 20130626)
78 [    0.000000] ACPI: FACS 00000000acee2810 00040
79 [    0.000000] ACPI: HPET 00000000acee6190 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
80 [    0.000000] ACPI: APIC 00000000acee61d0 0006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
81 [    0.000000] ACPI: MCFG 00000000acee6240 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
82 [    0.000000] ACPI: SSDT 00000000acee7280 0122C (v02 CORE   COREBOOT 0000002A CORE 0000002A)
83 [    0.000000] ACPI: Local APIC address 0xfee00000
84 [    0.000000] No NUMA configuration found
85 [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014fdfffff]
86 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x14fdfffff]
87 [    0.000000]   NODE_DATA [mem 0x14fdf9000-0x14fdfdfff]
88 [    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014b400000-ffff88014f3fffff] on node 0
89 [    0.000000] Zone ranges:
90 [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
91 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
92 [    0.000000]   Normal   [mem 0x100000000-0x14fdfffff]
93 [    0.000000] Movable zone start for each node
94 [    0.000000] Early memory node ranges
95 [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
96 [    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
97 [    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
98 [    0.000000]   node   0: [mem 0x40200000-0xacecffff]
99 [    0.000000]   node   0: [mem 0x100000000-0x14fdfffff]
100 [    0.000000] On node 0 totalpages: 1034350
101 [    0.000000]   DMA zone: 64 pages used for memmap
102 [    0.000000]   DMA zone: 158 pages reserved
103 [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
104 [    0.000000]   DMA32 zone: 10988 pages used for memmap
105 [    0.000000]   DMA32 zone: 703184 pages, LIFO batch:31
106 [    0.000000]   Normal zone: 5112 pages used for memmap
107 [    0.000000]   Normal zone: 327168 pages, LIFO batch:31
108 [    0.000000] ACPI: PM-Timer IO Port: 0x508
109 [    0.000000] ACPI: Local APIC address 0xfee00000
110 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
111 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
112 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
113 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
114 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
115 [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
116 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
117 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
118 [    0.000000] ACPI: IRQ0 used by override.
119 [    0.000000] ACPI: IRQ2 used by override.
120 [    0.000000] ACPI: IRQ9 used by override.
121 [    0.000000] Using ACPI (MADT) for SMP configuration information
122 [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
123 [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
124 [    0.000000] nr_irqs_gsi: 40
125 [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
126 [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
127 [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
128 [    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
129 [    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
130 [    0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xaf9fffff]
131 [    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
132 [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
133 [    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
134 [    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
135 [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
136 [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88014fa00000 s81600 r8192 d20800 u524288
137 [    0.000000] pcpu-alloc: s81600 r8192 d20800 u524288 alloc=1*2097152
138 [    0.000000] pcpu-alloc: [0] 0 1 2 3 
139 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1018028
140 [    0.000000] Policy zone: Normal
141 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12.3 root=UUID=a48f9648-a47c-49ae-b8ec-9222179de834 ro quiet splash vt.handoff=7
142 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
143 [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
144 [    0.000000] Checking aperture...
145 [    0.000000] No AGP bridge found
146 [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
147 [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
148 [    0.000000] Memory: 3964804K/4137400K available (6729K kernel code, 961K rwdata, 3084K rodata, 1172K init, 1260K bss, 172596K reserved)
149 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
150 [    0.000000] Hierarchical RCU implementation.
151 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
152 [    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
153 [    0.000000] NR_IRQS:16640 nr_irqs:712 16
154 [    0.000000] spurious 8259A interrupt: IRQ7.
155 [    0.000000] Console: colour dummy device 80x25
156 [    0.000000] console [tty0] enabled
157 [    0.000000] allocated 16777216 bytes of page_cgroup
158 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
159 [    0.000000] hpet clockevent registered
160 [    0.000000] tsc: Fast TSC calibration using PIT
161 [    0.004000] tsc: Detected 1596.284 MHz processor
162 [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.56 BogoMIPS (lpj=6385136)
163 [    0.000006] pid_max: default: 32768 minimum: 301
164 [    0.000035] Security Framework initialized
165 [    0.000052] AppArmor: AppArmor initialized
166 [    0.000053] Yama: becoming mindful.
167 [    0.000492] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
168 [    0.001733] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
169 [    0.002244] Mount-cache hash table entries: 256
170 [    0.002471] Initializing cgroup subsys memory
171 [    0.002482] Initializing cgroup subsys devices
172 [    0.002485] Initializing cgroup subsys freezer
173 [    0.002487] Initializing cgroup subsys blkio
174 [    0.002489] Initializing cgroup subsys perf_event
175 [    0.002492] Initializing cgroup subsys hugetlb
176 [    0.002519] CPU: Physical Processor ID: 0
177 [    0.002520] CPU: Processor Core ID: 0
178 [    0.002527] mce: CPU supports 7 MCE banks
179 [    0.002542] CPU0: Thermal monitoring enabled (TM1)
180 [    0.002554] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
181 [    0.002554] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
182 [    0.002554] tlb_flushall_shift: 5
183 [    0.002699] Freeing SMP alternatives memory: 24K (ffffffff81e17000 - ffffffff81e1d000)
184 [    0.002702] ACPI: Core revision 20130725
185 [    0.005943] ACPI: All ACPI Tables successfully acquired
186 [    0.015378] ftrace: allocating 25882 entries in 102 pages
187 [    0.035009] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
188 [    0.074666] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07)
189 [    0.074678] TSC deadline timer enabled
190 [    0.074690] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
191 [    0.074701] ... version:                3
192 [    0.074702] ... bit width:              48
193 [    0.074704] ... generic registers:      4
194 [    0.074705] ... value mask:             0000ffffffffffff
195 [    0.074707] ... max period:             0000ffffffffffff
196 [    0.074708] ... fixed-purpose events:   3
197 [    0.074710] ... event mask:             000000070000000f
198 [    0.089563] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
199 [    0.076290] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
200 [    0.116071] Brought up 4 CPUs
201 [    0.116076] smpboot: Total of 4 processors activated (12770.27 BogoMIPS)
202 [    0.120124] devtmpfs: initialized
203 [    0.123207] EVM: security.selinux
204 [    0.123210] EVM: security.SMACK64
205 [    0.123211] EVM: security.capability
206 [    0.124465] regulator-dummy: no parameters
207 [    0.124522] NET: Registered protocol family 16
208 [    0.124620] cpuidle: using governor ladder
209 [    0.124622] cpuidle: using governor menu
210 [    0.124668] ACPI: bus type PCI registered
211 [    0.124728] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
212 [    0.124731] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
213 [    0.131144] PCI: Using configuration type 1 for base access
214 [    0.132256] bio: create slab <bio-0> at 0
215 [    0.132426] ACPI: Added _OSI(Module Device)
216 [    0.132429] ACPI: Added _OSI(Processor Device)
217 [    0.132430] ACPI: Added _OSI(3.0 _SCP Extensions)
218 [    0.132432] ACPI: Added _OSI(Processor Aggregator Device)
219 [    0.133501] ACPI: EC: Look up EC in DSDT
220 [    0.144830] ACPI: Interpreter enabled
221 [    0.144837] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
222 [    0.144843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
223 [    0.144860] ACPI: (supports S0 S3 S4 S5)
224 [    0.144863] ACPI: Using IOAPIC for interrupt routing
225 [    0.144890] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
226 [    0.145024] ACPI: No dock devices found.
227 [    0.149038] ACPI: Power Resource [FNP0] (off)
228 [    0.150338] ACPI: Power Resource [FNP1] (off)
229 [    0.151611] ACPI: Power Resource [FNP2] (off)
230 [    0.153468] ACPI: Power Resource [FNP3] (off)
231 [    0.154740] ACPI: Power Resource [FNP4] (off)
232 [    0.168007] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
233 [    0.168061] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
234 [    0.168102] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
235 [    0.168232] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
236 [    0.168237] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
237 [    0.168265] PCI host bridge to bus 0000:00
238 [    0.168268] pci_bus 0000:00: root bus resource [bus 00-ff]
239 [    0.168271] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
240 [    0.168273] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
241 [    0.168278] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
242 [    0.168281] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
243 [    0.168283] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
244 [    0.168285] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
245 [    0.168288] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
246 [    0.168290] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
247 [    0.168293] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
248 [    0.168295] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
249 [    0.168298] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
250 [    0.168300] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
251 [    0.168302] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
252 [    0.168305] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
253 [    0.168307] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
254 [    0.168310] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
255 [    0.168312] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
256 [    0.168324] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
257 [    0.168429] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
258 [    0.168444] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
259 [    0.168453] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
260 [    0.168460] pci 0000:00:02.0: reg 0x20: [io  0x2000-0x203f]
261 [    0.168599] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
262 [    0.168628] pci 0000:00:16.0: reg 0x10: [mem 0xe0606100-0xe060610f 64bit]
263 [    0.168727] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
264 [    0.168832] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
265 [    0.168859] pci 0000:00:1a.0: reg 0x10: [mem 0xe0605800-0xe0605bff]
266 [    0.168970] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
267 [    0.169022] pci 0000:00:1a.0: System wakeup disabled by ACPI
268 [    0.169069] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
269 [    0.169095] pci 0000:00:1b.0: reg 0x10: [mem 0xe0600000-0xe0603fff 64bit]
270 [    0.169196] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
271 [    0.169248] pci 0000:00:1b.0: System wakeup disabled by ACPI
272 [    0.169289] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
273 [    0.169394] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
274 [    0.169485] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
275 [    0.169595] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
276 [    0.169692] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
277 [    0.169721] pci 0000:00:1d.0: reg 0x10: [mem 0xe0605c00-0xe0605fff]
278 [    0.169831] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
279 [    0.169881] pci 0000:00:1d.0: System wakeup disabled by ACPI
280 [    0.169928] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
281 [    0.170141] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
282 [    0.170169] pci 0000:00:1f.2: reg 0x10: [io  0x2060-0x2067]
283 [    0.170183] pci 0000:00:1f.2: reg 0x14: [io  0x2070-0x2073]
284 [    0.170197] pci 0000:00:1f.2: reg 0x18: [io  0x2068-0x206f]
285 [    0.170211] pci 0000:00:1f.2: reg 0x1c: [io  0x2074-0x2077]
286 [    0.170225] pci 0000:00:1f.2: reg 0x20: [io  0x2040-0x205f]
287 [    0.170241] pci 0000:00:1f.2: reg 0x24: [mem 0xe0605000-0xe06057ff]
288 [    0.170308] pci 0000:00:1f.2: PME# supported from D3hot
289 [    0.170388] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
290 [    0.170414] pci 0000:00:1f.3: reg 0x10: [mem 0xe0606000-0xe06060ff 64bit]
291 [    0.170450] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
292 [    0.170555] pci 0000:00:1f.6: [8086:1c24] type 00 class 0x118000
293 [    0.170585] pci 0000:00:1f.6: reg 0x10: [mem 0xe0604000-0xe0604fff 64bit]
294 [    0.170840] pci 0000:01:00.0: [168c:0030] type 00 class 0x028000
295 [    0.170897] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe041ffff 64bit]
296 [    0.171012] pci 0000:01:00.0: reg 0x30: [mem 0xe0420000-0xe042ffff pref]
297 [    0.171114] pci 0000:01:00.0: supports D1
298 [    0.171117] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
299 [    0.176096] pci 0000:00:1c.0: PCI bridge to [bus 01]
300 [    0.176119] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
301 [    0.176220] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
302 [    0.176246] pci 0000:02:00.0: reg 0x10: [io  0x1000-0x10ff]
303 [    0.176290] pci 0000:02:00.0: reg 0x18: [mem 0xe0504000-0xe0504fff 64bit pref]
304 [    0.176319] pci 0000:02:00.0: reg 0x20: [mem 0xe0500000-0xe0503fff 64bit pref]
305 [    0.176428] pci 0000:02:00.0: supports D1 D2
306 [    0.176430] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
307 [    0.184085] pci 0000:00:1c.3: PCI bridge to [bus 02]
308 [    0.184096] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
309 [    0.184122] pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
310 [    0.184343] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
311 [    0.184411] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
312 [    0.184478] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
313 [    0.184540] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
314 [    0.184600] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
315 [    0.184662] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
316 [    0.184723] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
317 [    0.184782] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
318 [    0.186320] ACPI: \_SB_.PCI0: notify handler is installed
319 [    0.186368] Found 1 acpi root devices
320 [    0.186407] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
321 [    0.186510] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
322 [    0.186514] vgaarb: loaded
323 [    0.186516] vgaarb: bridge control possible 0000:00:02.0
324 [    0.186697] SCSI subsystem initialized
325 [    0.186756] libata version 3.00 loaded.
326 [    0.186762] ACPI: bus type USB registered
327 [    0.186783] usbcore: registered new interface driver usbfs
328 [    0.186792] usbcore: registered new interface driver hub
329 [    0.186820] usbcore: registered new device driver usb
330 [    0.186839] pps_core: LinuxPPS API ver. 1 registered
331 [    0.186841] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
332 [    0.186845] PTP clock support registered
333 [    0.186909] PCI: Using ACPI for IRQ routing
334 [    0.188772] PCI: pci_cache_line_size set to 64 bytes
335 [    0.188848] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
336 [    0.188850] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff]
337 [    0.188853] e820: reserve RAM buffer [mem 0x14fe00000-0x14fffffff]
338 [    0.188952] NetLabel: Initializing
339 [    0.188954] NetLabel:  domain hash size = 128
340 [    0.188955] NetLabel:  protocols = UNLABELED CIPSOv4
341 [    0.188970] NetLabel:  unlabeled traffic allowed by default
342 [    0.189038] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
343 [    0.189045] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
344 [    0.192074] Switched to clocksource hpet
345 [    0.197962] AppArmor: AppArmor Filesystem Enabled
346 [    0.197990] pnp: PnP ACPI init
347 [    0.198003] ACPI: bus type PNP registered
348 [    0.198075] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
349 [    0.198105] pnp 00:01: Plug and Play ACPI device, IDs PNP0a05 (active)
350 [    0.198171] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
351 [    0.198174] system 00:02: [mem 0xfed10000-0xfed17fff] has been reserved
352 [    0.198177] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
353 [    0.198180] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
354 [    0.198183] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
355 [    0.198186] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
356 [    0.198188] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
357 [    0.198191] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
358 [    0.198194] system 00:02: [mem 0x20000000-0x201fffff] has been reserved
359 [    0.198197] system 00:02: [mem 0x40000000-0x401fffff] has been reserved
360 [    0.198201] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
361 [    0.199596] pnp 00:03: [dma 4]
362 [    0.199642] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
363 [    0.199670] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
364 [    0.199785] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
365 [    0.199789] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
366 [    0.199829] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
367 [    0.199875] system 00:07: [io  0x0500-0x057f] could not be reserved
368 [    0.199878] system 00:07: [io  0x0480-0x04bf] has been reserved
369 [    0.199881] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
370 [    0.199909] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
371 [    0.200005] system 00:09: [io  0x0b00-0x0b07] has been reserved
372 [    0.200009] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
373 [    0.200158] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
374 [    0.200246] system 00:0b: [io  0x0a00-0x0a33] has been reserved
375 [    0.200250] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
376 [    0.200278] pnp: PnP ACPI: found 12 devices
377 [    0.200280] ACPI: bus type PNP unregistered
378 [    0.206902] pci 0000:00:1c.0: PCI bridge to [bus 01]
379 [    0.206911] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
380 [    0.206925] pci 0000:00:1c.3: PCI bridge to [bus 02]
381 [    0.206930] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
382 [    0.206943] pci 0000:00:1c.3:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
383 [    0.206954] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
384 [    0.206956] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
385 [    0.206959] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
386 [    0.206962] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
387 [    0.206964] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
388 [    0.206967] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
389 [    0.206969] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
390 [    0.206972] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
391 [    0.206974] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
392 [    0.206976] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
393 [    0.206979] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
394 [    0.206981] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
395 [    0.206984] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
396 [    0.206986] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
397 [    0.206988] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
398 [    0.206991] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
399 [    0.206993] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
400 [    0.206996] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
401 [    0.206999] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
402 [    0.207002] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
403 [    0.207039] NET: Registered protocol family 2
404 [    0.207236] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
405 [    0.207384] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
406 [    0.207472] TCP: Hash tables configured (established 32768 bind 32768)
407 [    0.207500] TCP: reno registered
408 [    0.207511] UDP hash table entries: 2048 (order: 4, 65536 bytes)
409 [    0.207534] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
410 [    0.207608] NET: Registered protocol family 1
411 [    0.207622] pci 0000:00:02.0: Boot video device
412 [    0.208025] PCI: CLS 64 bytes, default 64
413 [    0.208095] Trying to unpack rootfs image as initramfs...
414 [    0.762628] Freeing initrd memory: 23920K (ffff880035138000 - ffff880036894000)
415 [    0.762634] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
416 [    0.762637] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff]
417 [    0.762929] Scanning for low memory corruption every 60 seconds
418 [    0.763240] Initialise module verification
419 [    0.763294] audit: initializing netlink socket (disabled)
420 [    0.763306] type=2000 audit(1401018588.752:1): initialized
421 [    0.812133] bounce pool size: 64 pages
422 [    0.812144] HugeTLB registered 2 MB page size, pre-allocated 0 pages
423 [    0.813733] VFS: Disk quotas dquot_6.5.2
424 [    0.813781] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
425 [    0.814299] fuse init (API version 7.22)
426 [    0.814391] msgmni has been set to 7790
427 [    0.815001] Key type asymmetric registered
428 [    0.815004] Asymmetric key parser 'x509' registered
429 [    0.815040] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
430 [    0.815087] io scheduler noop registered
431 [    0.815089] io scheduler deadline registered (default)
432 [    0.815118] io scheduler cfq registered
433 [    0.815334] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
434 [    0.815529] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
435 [    0.815660] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
436 [    0.815663] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
437 [    0.815669] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
438 [    0.815694] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
439 [    0.815696] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
440 [    0.815702] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
441 [    0.815742] intel_idle: MWAIT substates: 0x21120
442 [    0.815743] intel_idle: v0.4 model 0x2A
443 [    0.815745] intel_idle: lapic_timer_reliable_states 0xffffffff
444 [    0.818214] ACPI: AC Adapter [AC] (on-line)
445 [    0.818296] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
446 [    0.821424] ACPI: Lid Switch [LID0]
447 [    0.821494] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
448 [    0.821499] ACPI: Power Button [PWRB]
449 [    0.821536] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
450 [    0.821539] ACPI: Sleep Button [TPAD]
451 [    0.821586] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
452 [    0.821589] ACPI: Power Button [PWRF]
453 [    0.823994] ACPI: Fan [FAN0] (off)
454 [    0.825261] ACPI: Fan [FAN1] (off)
455 [    0.827148] ACPI: Fan [FAN2] (off)
456 [    0.828420] ACPI: Fan [FAN3] (off)
457 [    0.829780] ACPI: Fan [FAN4] (off)
458 [    0.829804] ACPI: Requesting acpi_cpufreq
459 [    0.852860] thermal LNXTHERM:00: registered as thermal_zone0
460 [    0.852863] ACPI: Thermal Zone [THRM] (48 C)
461 [    0.852891] GHES: HEST is not enabled!
462 [    0.852964] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
463 [    0.855440] Linux agpgart interface v0.103
464 [    0.857454] brd: module loaded
465 [    0.857587] tun: Universal TUN/TAP device driver, 1.6
466 [    0.857589] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
467 [    0.857640] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
468 [    0.857643] ehci-pci: EHCI PCI platform driver
469 [    0.857770] ehci-pci 0000:00:1a.0: setting latency timer to 64
470 [    0.857780] ehci-pci 0000:00:1a.0: EHCI Host Controller
471 [    0.857787] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
472 [    0.857806] ehci-pci 0000:00:1a.0: debug port 2
473 [    0.861700] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
474 [    0.861719] ehci-pci 0000:00:1a.0: irq 17, io mem 0xe0605800
475 [    0.869339] ACPI: Battery Slot [BAT0] (battery present)
476 [    0.871623] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
477 [    0.871690] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
478 [    0.871693] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
479 [    0.871695] usb usb1: Product: EHCI Host Controller
480 [    0.871697] usb usb1: Manufacturer: Linux 3.12.3 ehci_hcd
481 [    0.871700] usb usb1: SerialNumber: 0000:00:1a.0
482 [    0.871884] hub 1-0:1.0: USB hub found
483 [    0.871894] hub 1-0:1.0: 3 ports detected
484 [    0.872128] ehci-pci 0000:00:1d.0: setting latency timer to 64
485 [    0.872136] ehci-pci 0000:00:1d.0: EHCI Host Controller
486 [    0.872142] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
487 [    0.872158] ehci-pci 0000:00:1d.0: debug port 2
488 [    0.876059] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
489 [    0.876077] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0605c00
490 [    0.887599] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
491 [    0.887641] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
492 [    0.887643] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
493 [    0.887646] usb usb2: Product: EHCI Host Controller
494 [    0.887648] usb usb2: Manufacturer: Linux 3.12.3 ehci_hcd
495 [    0.887651] usb usb2: SerialNumber: 0000:00:1d.0
496 [    0.887874] hub 2-0:1.0: USB hub found
497 [    0.887883] hub 2-0:1.0: 3 ports detected
498 [    0.888023] ehci-platform: EHCI generic platform driver
499 [    0.888032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
500 [    0.888033] ohci-pci: OHCI PCI platform driver
501 [    0.888044] ohci-platform: OHCI generic platform driver
502 [    0.888052] uhci_hcd: USB Universal Host Controller Interface driver
503 [    0.888110] i8042: PNP: PS/2 Controller [PNP0303:SKBC] at 0x60,0x64 irq 1
504 [    0.888112] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
505 [    0.890392] serio: i8042 KBD port at 0x60,0x64 irq 1
506 [    0.890684] mousedev: PS/2 mouse device common for all mice
507 [    0.890710] rtc_cmos 00:08: RTC can wake from S4
508 [    0.890933] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
509 [    0.890969] rtc_cmos 00:08: alarms up to one month, 242 bytes nvram, hpet irqs
510 [    0.891041] device-mapper: uevent: version 1.0.3
511 [    0.891194] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
512 [    0.891202] ledtrig-cpu: registered to indicate activity on CPUs
513 [    0.891556] ashmem: initialized
514 [    0.891790] TCP: cubic registered
515 [    0.891903] NET: Registered protocol family 10
516 [    0.892088] NET: Registered protocol family 17
517 [    0.892102] Key type dns_resolver registered
518 [    0.892688] Loading module verification certificates
519 [    0.894003] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: f0afa13bbdcdf862e0e414746481c5a047ae9206'
520 [    0.894016] registered taskstats version 1
521 [    0.896830] Key type trusted registered
522 [    0.899195] Key type encrypted registered
523 [    0.901524] AppArmor: AppArmor sha1 policy hashing enabled
524 [    0.901929] rtc_cmos 00:08: setting system clock to 2014-05-25 11:49:49 UTC (1401018589)
525 [    0.902301] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
526 [    0.902303] EDD information not available.
527 [    0.903138] Freeing unused kernel memory: 1172K (ffffffff81cf2000 - ffffffff81e17000)
528 [    0.903141] Write protecting the kernel read-only data: 12288k
529 [    0.906531] Freeing unused kernel memory: 1452K (ffff880001695000 - ffff880001800000)
530 [    0.908528] Freeing unused kernel memory: 1012K (ffff880001b03000 - ffff880001c00000)
531 [    0.920620] udevd[107]: starting version 175
532 [    0.966952] ahci 0000:00:1f.2: version 3.0
533 [    0.968772] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
534 [    0.968831] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
535 [    0.968861] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
536 [    0.968867] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
537 [    0.968874] ahci 0000:00:1f.2: setting latency timer to 64
538 [    0.970430] scsi0 : ahci
539 [    0.970518] [drm] Initialized drm 1.1.0 20060810
540 [    0.971106] scsi1 : ahci
541 [    0.971911] scsi2 : ahci
542 [    0.972638] scsi3 : ahci
543 [    0.973764] scsi4 : ahci
544 [    0.974449] scsi5 : ahci
545 [    0.974523] ata1: SATA max UDMA/133 abar m2048@0xe0605000 port 0xe0605100 irq 42
546 [    0.974527] ata2: DUMMY
547 [    0.974529] ata3: DUMMY
548 [    0.974531] ata4: DUMMY
549 [    0.974533] ata5: DUMMY
550 [    0.974534] ata6: DUMMY
551 [    0.975317] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
552 [    0.976060] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
553 [    0.976810] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000640000, e8:03:9a:ab:cf:06, XID 0c900800 IRQ 43
554 [    0.976815] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
555 [    0.978490] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
556 [    0.978559] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
557 [    0.996112] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
558 [    1.009514] [drm] Memory usable by graphics device = 2048M
559 [    1.009524] i915 0000:00:02.0: setting latency timer to 64
560 [    1.034455] i915 0000:00:02.0: irq 44 for MSI/MSI-X
561 [    1.034465] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
562 [    1.034466] [drm] Driver supports precise vblank timestamp query.
563 [    1.034536] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
564 [    1.063901] [drm] Wrong MCH_SSKPD value: 0x16040307
565 [    1.063905] [drm] This can cause pipe underruns and display issues.
566 [    1.063906] [drm] Please upgrade your BIOS to fix this.
567 [    1.081515] fbcon: inteldrmfb (fb0) is primary device
568 [    1.183574] usb 1-1: new high-speed USB device number 2 using ehci-pci
569 [    1.291420] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
570 [    1.292273] ata1.00: ATA-8: SanDisk SSD P4 16GB, SSD 8.13, max UDMA/133
571 [    1.292278] ata1.00: 31277232 sectors, multi 1: LBA48 
572 [    1.293169] ata1.00: configured for UDMA/133
573 [    1.293409] scsi 0:0:0:0: Direct-Access     ATA      SanDisk SSD P4 1 SSD  PQ: 0 ANSI: 5
574 [    1.293584] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
575 [    1.293588] sd 0:0:0:0: Attached scsi generic sg0 type 0
576 [    1.293700] sd 0:0:0:0: [sda] Write Protect is off
577 [    1.293703] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
578 [    1.293759] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
579 [    1.297402]  sda: sda1
580 [    1.297757] sd 0:0:0:0: [sda] Attached SCSI disk
581 [    1.315710] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
582 [    1.315722] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
583 [    1.315963] hub 1-1:1.0: USB hub found
584 [    1.316062] hub 1-1:1.0: 6 ports detected
585 [    1.427373] usb 2-1: new high-speed USB device number 2 using ehci-pci
586 [    1.559676] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
587 [    1.559681] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
588 [    1.560085] hub 2-1:1.0: USB hub found
589 [    1.560144] hub 2-1:1.0: 6 ports detected
590 [    1.631301] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
591 [    1.725494] usb 1-1.1: New USB device found, idVendor=1410, idProduct=a021
592 [    1.725500] usb 1-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
593 [    1.725504] usb 1-1.1: Product: Novatel Wireless Gobi3000
594 [    1.725507] usb 1-1.1: Manufacturer: Foxconn
595 [    1.759092] tsc: Refined TSC clocksource calibration: 1596.375 MHz
596 [    1.803104] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
597 [    1.815095] Console: switching to colour frame buffer device 160x50
598 [    1.817453] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
599 [    1.817455] i915 0000:00:02.0: registered panic notifier
600 [    1.817469] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
601 [    2.010322] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1017
602 [    2.010328] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
603 [    2.010332] usb 1-1.4: Product: WebCam SC-10HDP11538N
604 [    2.010334] usb 1-1.4: Manufacturer: Namuga
605 [    2.018786] raid6: sse2x1    6162 MB/s
606 [    2.086736] raid6: sse2x2    7602 MB/s
607 [    2.154688] raid6: sse2x4    8805 MB/s
608 [    2.154689] raid6: using algorithm sse2x4 (8805 MB/s)
609 [    2.154691] raid6: using ssse3x2 recovery algorithm
610 [    2.155940] xor: automatically using best checksumming function:
611 [    2.194659]    avx       : 17300.000 MB/sec
612 [    2.208238] bio: create slab <bio-1> at 1
613 [    2.208574] Btrfs loaded
614 [    2.228570] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
615 [    2.431603] init: ureadahead main process (365) terminated with status 5
616 [    2.594895] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
617 [    2.661403] udevd[470]: starting version 175
618 [    2.745804] loop: module loaded
619 [    2.758441] Switched to clocksource tsc
620 [    2.822556] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
621 [    2.992601] Bluetooth: Core ver 2.16
622 [    2.992628] NET: Registered protocol family 31
623 [    2.992631] Bluetooth: HCI device and connection manager initialized
624 [    2.992640] Bluetooth: HCI socket layer initialized
625 [    2.992644] Bluetooth: L2CAP socket layer initialized
626 [    2.992651] Bluetooth: SCO socket layer initialized
627 [    3.003292] Bluetooth: RFCOMM TTY layer initialized
628 [    3.003308] Bluetooth: RFCOMM socket layer initialized
629 [    3.003310] Bluetooth: RFCOMM ver 1.11
630 [    3.006128] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
631 [    3.006131] Bluetooth: BNEP filters: protocol multicast
632 [    3.006139] Bluetooth: BNEP socket layer initialized
633 [    3.014237] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
634 [    3.014247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
635 [    3.014253] ACPI Warning: 0x00000000000004c0-0x00000000000004cf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
636 [    3.014259] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
637 [    3.014262] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
638 [    3.014267] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
639 [    3.014269] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
640 [    3.014274] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
641 [    3.014276] lpc_ich: Resource conflict(s) found affecting gpio_ich
642 [    3.063987] cfg80211: Calling CRDA to update world regulatory domain
643 [    3.074304] init: avahi-cups-reload main process (644) terminated with status 1
644 [    3.108666] usbcore: registered new interface driver usbserial
645 [    3.108684] usbcore: registered new interface driver usbserial_generic
646 [    3.108699] usbserial: USB Serial support registered for generic
647 [    3.122168] usbcore: registered new interface driver qcserial
648 [    3.122372] usbserial: USB Serial support registered for Qualcomm USB modem
649 [    3.122941] qcserial 1-1.1:1.1: Qualcomm USB modem converter detected
650 [    3.123132] usb 1-1.1: Qualcomm USB modem converter now attached to ttyUSB0
651 [    3.124285] qcserial 1-1.1:1.2: Qualcomm USB modem converter detected
652 [    3.124400] usb 1-1.1: Qualcomm USB modem converter now attached to ttyUSB1
653 [    3.125027] qcserial 1-1.1:1.3: Qualcomm USB modem converter detected
654 [    3.125160] usb 1-1.1: Qualcomm USB modem converter now attached to ttyUSB2
655 [    3.130794] ath: module verification failed: signature and/or required key missing - tainting kernel
656 [    3.156116] usbcore: registered new interface driver cdc_wdm
657 [    3.170467] device-mapper: multipath: version 1.6.0 loaded
658 [    3.176815] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
659 [    3.206131] qmi_wwan 1-1.1:1.0: cdc-wdm0: USB WDM device
660 [    3.206334] qmi_wwan 1-1.1:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1a.0-1.1, WWAN/QMI device, c2:1c:c1:62:f1:8a
661 [    3.206390] usbcore: registered new interface driver qmi_wwan
662 [    3.286294] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
663 [    3.321457] cfg80211: World regulatory domain updated:
664 [    3.321462] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
665 [    3.321466] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
666 [    3.321469] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
667 [    3.321471] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
668 [    3.321474] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
669 [    3.321477] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
670 [    3.323233] init: failsafe main process (740) killed by TERM signal
671 [    3.333935] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
672 [    3.334297] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
673 [    3.334653] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
674 [    3.334893] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
675 [    3.335121] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
676 [    3.335335] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
677 [    3.378712] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-7/7-0067/input/input12
678 [    3.444020] ath: phy0: ASPM enabled: 0x43
679 [    3.444025] ath: EEPROM regdomain: 0x6a
680 [    3.444026] ath: EEPROM indicates we should expect a direct regpair map
681 [    3.444029] ath: Country alpha2 being used: 00
682 [    3.444030] ath: Regpair used: 0x6a
683 [    3.464481] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
684 [    3.464762] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90014d40000, irq=16
685 [    3.650326] init: smbd main process (795) killed by HUP signal
686 [    3.650368] init: smbd main process ended, respawning
687 [    3.827101] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
688 [    3.943554] r8169 0000:02:00.0 eth0: link down
689 [    3.943569] r8169 0000:02:00.0 eth0: link down
690 [    3.943622] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
691 [    4.918309] init: plymouth-stop pre-start process (1386) terminated with status 1
692 [    6.204741] r8169 0000:02:00.0 eth0: link up
693 [    6.204751] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready