lenovo/x220/4.0-6835-g8603513/2014-08-30T17:27:18Z
[board-status.git] / lenovo / x230 / 4.0-5312-ge7e9502-dirty / 2014-01-22T15:53:30Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Initializing cgroup subsys cpuacct
4 [    0.000000] Linux version 3.12-rc7-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-9) ) #1 SMP Debian 3.12~rc7-1~exp1 (2013-10-28)
5 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12-rc7-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
6 [    0.000000] e820: BIOS-provided physical RAM map:
7 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8 [    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9 [    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
10 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11 [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12 [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13 [    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14 [    0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable
15 [    0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000acffffff] type 16
16 [    0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
17 [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
18 [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable
19 [    0.000000] NX (Execute Disable) protection: active
20 [    0.000000] SMBIOS 2.7 present.
21 [    0.000000] DMI: LENOVO 2325TLU, BIOS CBET4000 coreboot 01/22/2014
22 [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24 [    0.000000] No AGP bridge found
25 [    0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000
26 [    0.000000] MTRR default type: write-back
27 [    0.000000] MTRR fixed ranges enabled:
28 [    0.000000]   00000-9FFFF write-back
29 [    0.000000]   A0000-BFFFF uncachable
30 [    0.000000]   C0000-FFFFF write-back
31 [    0.000000] MTRR variable ranges enabled:
32 [    0.000000]   0 base 0AD000000 mask FFF000000 uncachable
33 [    0.000000]   1 base 0AE000000 mask FFE000000 uncachable
34 [    0.000000]   2 base 0B0000000 mask FF0000000 uncachable
35 [    0.000000]   3 base 0C0000000 mask FE0000000 uncachable
36 [    0.000000]   4 base 0E0000000 mask FF0000000 uncachable
37 [    0.000000]   5 base 0F0000000 mask FF8000000 uncachable
38 [    0.000000]   6 base 0F8000000 mask FFC000000 uncachable
39 [    0.000000]   7 base 0FC000000 mask FFE000000 uncachable
40 [    0.000000]   8 base 0FE000000 mask FFF000000 uncachable
41 [    0.000000]   9 base 0FF000000 mask FFF800000 uncachable
42 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43 [    0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000
44 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45 [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
46 [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
47 [    0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE
48 [    0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE
49 [    0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
50 [    0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff]
51 [    0.000000]  [mem 0x44e400000-0x44e5fffff] page 2M
52 [    0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
53 [    0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff]
54 [    0.000000]  [mem 0x44c000000-0x44e3fffff] page 2M
55 [    0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff]
56 [    0.000000]  [mem 0x400000000-0x44bffffff] page 2M
57 [    0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
58 [    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
59 [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
60 [    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
61 [    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
62 [    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
63 [    0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff]
64 [    0.000000]  [mem 0x40200000-0xacdfffff] page 2M
65 [    0.000000]  [mem 0xace00000-0xacecffff] page 4k
66 [    0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
67 [    0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
68 [    0.000000]  [mem 0x100000000-0x3ffffffff] page 2M
69 [    0.000000] RAMDISK: [mem 0x3615a000-0x370a4fff]
70 [    0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE  )
71 [    0.000000] ACPI: XSDT 00000000acee08e0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
72 [    0.000000] ACPI: FACP 00000000acee3f70 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
73 [    0.000000] ACPI: DSDT 00000000acee0a50 0351A (v02 COREv4 COREBOOT 20110725 INTL 20131218)
74 [    0.000000] ACPI: FACS 00000000acee0a10 00040
75 [    0.000000] ACPI: HPET 00000000acee4070 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
76 [    0.000000] ACPI: APIC 00000000acee40b0 0006C (v01 CORE   COREBOOT 00000000 CORE 00000000)
77 [    0.000000] ACPI: MCFG 00000000acee4120 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
78 [    0.000000] ACPI: SSDT 00000000acee5020 0122C (v02 CORE   COREBOOT 0000002A CORE 0000002A)
79 [    0.000000] ACPI: Local APIC address 0xfee00000
80 [    0.000000] No NUMA configuration found
81 [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff]
82 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff]
83 [    0.000000]   NODE_DATA [mem 0x44e5ee000-0x44e5f1fff]
84 [    0.000000]  [ffffea0000000000-ffffea000f1fffff] PMD -> [ffff88043dc00000-ffff88044bdfffff] on node 0
85 [    0.000000] Zone ranges:
86 [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
87 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
88 [    0.000000]   Normal   [mem 0x100000000-0x44e5fffff]
89 [    0.000000] Movable zone start for each node
90 [    0.000000] Early memory node ranges
91 [    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
92 [    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
93 [    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
94 [    0.000000]   node   0: [mem 0x40200000-0xacecffff]
95 [    0.000000]   node   0: [mem 0x100000000-0x44e5fffff]
96 [    0.000000] On node 0 totalpages: 4173935
97 [    0.000000]   DMA zone: 56 pages used for memmap
98 [    0.000000]   DMA zone: 22 pages reserved
99 [    0.000000]   DMA zone: 3999 pages, LIFO batch:0
100 [    0.000000]   DMA32 zone: 9614 pages used for memmap
101 [    0.000000]   DMA32 zone: 703184 pages, LIFO batch:31
102 [    0.000000]   Normal zone: 47397 pages used for memmap
103 [    0.000000]   Normal zone: 3466752 pages, LIFO batch:31
104 [    0.000000] ACPI: PM-Timer IO Port: 0x508
105 [    0.000000] ACPI: Local APIC address 0xfee00000
106 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
107 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
108 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
109 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
110 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
111 [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
112 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
113 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
114 [    0.000000] ACPI: IRQ0 used by override.
115 [    0.000000] ACPI: IRQ2 used by override.
116 [    0.000000] ACPI: IRQ9 used by override.
117 [    0.000000] Using ACPI (MADT) for SMP configuration information
118 [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
119 [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
120 [    0.000000] nr_irqs_gsi: 40
121 [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
122 [    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
123 [    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
124 [    0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xacffffff]
125 [    0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
126 [    0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
127 [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
128 [    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
129 [    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
130 [    0.000000] Booting paravirtualized kernel on bare hardware
131 [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
132 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88044e200000 s85888 r8192 d20608 u524288
133 [    0.000000] pcpu-alloc: s85888 r8192 d20608 u524288 alloc=1*2097152
134 [    0.000000] pcpu-alloc: [0] 0 1 2 3 
135 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 4116846
136 [    0.000000] Policy zone: Normal
137 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-rc7-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
138 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
139 [    0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
140 [    0.000000] Checking aperture...
141 [    0.000000] No AGP bridge found
142 [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
143 [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
144 [    0.000000] Memory: 16370920K/16695740K available (4703K kernel code, 666K rwdata, 1592K rodata, 972K init, 932K bss, 324820K reserved)
145 [    0.000000] Hierarchical RCU implementation.
146 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
147 [    0.000000]  RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
148 [    0.000000] NR_IRQS:33024 nr_irqs:712 16
149 [    0.000000] Console: colour VGA+ 80x25
150 [    0.000000] console [tty0] enabled
151 [    0.000000] hpet clockevent registered
152 [    0.000000] tsc: Fast TSC calibration using PIT
153 [    0.004000] tsc: Detected 2793.525 MHz processor
154 [    0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=11174100)
155 [    0.000004] pid_max: default: 32768 minimum: 301
156 [    0.000023] Security Framework initialized
157 [    0.000027] AppArmor: AppArmor disabled by boot time parameter
158 [    0.000027] Yama: disabled by default; enable with sysctl kernel.yama.*
159 [    0.000752] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
160 [    0.004249] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
161 [    0.005834] Mount-cache hash table entries: 256
162 [    0.005969] Initializing cgroup subsys memory
163 [    0.005979] Initializing cgroup subsys devices
164 [    0.005980] Initializing cgroup subsys freezer
165 [    0.005981] Initializing cgroup subsys net_cls
166 [    0.005983] Initializing cgroup subsys blkio
167 [    0.005984] Initializing cgroup subsys perf_event
168 [    0.006004] CPU: Physical Processor ID: 0
169 [    0.006004] CPU: Processor Core ID: 0
170 [    0.006325] mce: CPU supports 7 MCE banks
171 [    0.006334] CPU0: Thermal monitoring enabled (TM1)
172 [    0.006343] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
173 [    0.006343] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
174 [    0.006343] tlb_flushall_shift: 1
175 [    0.006440] Freeing SMP alternatives memory: 20K (ffffffff8199b000 - ffffffff819a0000)
176 [    0.007318] ACPI: Core revision 20130725
177 [    0.008965] ACPI: All ACPI Tables successfully acquired
178 [    0.009620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
179 [    0.049351] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
180 [    0.049358] TSC deadline timer enabled
181 [    0.049365] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
182 [    0.049370] ... version:                3
183 [    0.049371] ... bit width:              48
184 [    0.049371] ... generic registers:      4
185 [    0.049372] ... value mask:             0000ffffffffffff
186 [    0.049373] ... max period:             0000ffffffffffff
187 [    0.049374] ... fixed-purpose events:   3
188 [    0.049374] ... event mask:             000000070000000f
189 [    0.062966] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
190 [    0.049557] smpboot: Booting Node   0, Processors  #   1 #   2 #   3 OK
191 [    0.090047] Brought up 4 CPUs
192 [    0.090050] smpboot: Total of 4 processors activated (22348.20 BogoMIPS)
193 [    0.092837] devtmpfs: initialized
194 [    0.095722] NET: Registered protocol family 16
195 [    0.095791] cpuidle: using governor ladder
196 [    0.095792] cpuidle: using governor menu
197 [    0.095801] ACPI: bus type PCI registered
198 [    0.095802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
199 [    0.095848] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
200 [    0.095850] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
201 [    0.099601] PCI: Using configuration type 1 for base access
202 [    0.100149] bio: create slab <bio-0> at 0
203 [    0.100235] ACPI: Added _OSI(Module Device)
204 [    0.100236] ACPI: Added _OSI(Processor Device)
205 [    0.100237] ACPI: Added _OSI(3.0 _SCP Extensions)
206 [    0.100238] ACPI: Added _OSI(Processor Aggregator Device)
207 [    0.100772] ACPI: EC: Look up EC in DSDT
208 [    0.102450] ACPI: Interpreter enabled
209 [    0.102454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
210 [    0.102458] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
211 [    0.102467] ACPI: (supports S0 S3 S4 S5)
212 [    0.102468] ACPI: Using IOAPIC for interrupt routing
213 [    0.102488] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
214 [    0.102558] ACPI: No dock devices found.
215 [    0.106258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
216 [    0.106288] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
217 [    0.106312] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
218 [    0.106389] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
219 [    0.106440] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
220 [    0.106511] PCI host bridge to bus 0000:00
221 [    0.106513] pci_bus 0000:00: root bus resource [bus 00-ff]
222 [    0.106515] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
223 [    0.106516] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
224 [    0.106518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
225 [    0.106519] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
226 [    0.106520] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
227 [    0.106521] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
228 [    0.106523] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
229 [    0.106524] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
230 [    0.106525] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
231 [    0.106526] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
232 [    0.106528] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
233 [    0.106529] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
234 [    0.106530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
235 [    0.106532] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
236 [    0.106533] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
237 [    0.106534] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
238 [    0.106535] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
239 [    0.106537] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
240 [    0.106543] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
241 [    0.106611] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
242 [    0.106620] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
243 [    0.106625] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
244 [    0.106629] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x183f]
245 [    0.106704] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
246 [    0.106725] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
247 [    0.106793] pci 0000:00:14.0: PME# supported from D3hot D3cold
248 [    0.106824] pci 0000:00:14.0: System wakeup disabled by ACPI
249 [    0.106853] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
250 [    0.106874] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit]
251 [    0.106948] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
252 [    0.107009] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
253 [    0.107026] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
254 [    0.107035] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
255 [    0.107043] pci 0000:00:19.0: reg 0x18: [io  0x1840-0x185f]
256 [    0.107103] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
257 [    0.107157] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
258 [    0.107177] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
259 [    0.107263] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
260 [    0.107293] pci 0000:00:1a.0: System wakeup disabled by ACPI
261 [    0.107322] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
262 [    0.107336] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
263 [    0.107401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
264 [    0.107432] pci 0000:00:1b.0: System wakeup disabled by ACPI
265 [    0.107464] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
266 [    0.107591] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
267 [    0.107660] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
268 [    0.107787] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
269 [    0.107856] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
270 [    0.107975] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
271 [    0.108049] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
272 [    0.108069] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
273 [    0.108155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
274 [    0.108187] pci 0000:00:1d.0: System wakeup disabled by ACPI
275 [    0.108215] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
276 [    0.108366] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
277 [    0.108385] pci 0000:00:1f.2: reg 0x10: [io  0x1880-0x1887]
278 [    0.108393] pci 0000:00:1f.2: reg 0x14: [io  0x1890-0x1893]
279 [    0.108401] pci 0000:00:1f.2: reg 0x18: [io  0x1888-0x188f]
280 [    0.108409] pci 0000:00:1f.2: reg 0x1c: [io  0x1894-0x1897]
281 [    0.108418] pci 0000:00:1f.2: reg 0x20: [io  0x1860-0x187f]
282 [    0.108426] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
283 [    0.108473] pci 0000:00:1f.2: PME# supported from D3hot
284 [    0.108522] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
285 [    0.108537] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
286 [    0.108557] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
287 [    0.108740] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
288 [    0.108766] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
289 [    0.108786] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
290 [    0.108787] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
291 [    0.108821] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
292 [    0.109096] pci 0000:01:00.0: supports D1 D2
293 [    0.109097] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
294 [    0.109203] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000
295 [    0.109239] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff]
296 [    0.109511] pci 0000:01:00.1: supports D1 D2
297 [    0.109512] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
298 [    0.116736] pci 0000:00:1c.0: PCI bridge to [bus 01]
299 [    0.116748] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
300 [    0.116997] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
301 [    0.117147] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
302 [    0.117856] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
303 [    0.128844] pci 0000:00:1c.1: PCI bridge to [bus 02]
304 [    0.128853] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
305 [    0.128946] pci 0000:00:1c.2: PCI bridge to [bus 03]
306 [    0.129127] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
307 [    0.129168] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
308 [    0.129206] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
309 [    0.129243] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
310 [    0.129280] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
311 [    0.129317] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
312 [    0.129354] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
313 [    0.129391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
314 [    0.129745] ACPI: \_SB_.PCI0: notify handler is installed
315 [    0.129768] Found 1 acpi root devices
316 [    0.129801] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
317 [    0.129861] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
318 [    0.129864] vgaarb: loaded
319 [    0.129865] vgaarb: bridge control possible 0000:00:02.0
320 [    0.129893] PCI: Using ACPI for IRQ routing
321 [    0.131364] PCI: pci_cache_line_size set to 64 bytes
322 [    0.131477] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff]
323 [    0.131479] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff]
324 [    0.131558] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
325 [    0.131561] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
326 [    0.133583] Switched to clocksource hpet
327 [    0.134712] pnp: PnP ACPI init
328 [    0.134720] ACPI: bus type PNP registered
329 [    0.134766] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
330 [    0.134768] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
331 [    0.134770] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
332 [    0.134771] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
333 [    0.134773] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
334 [    0.134774] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
335 [    0.134776] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
336 [    0.134777] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
337 [    0.134779] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
338 [    0.134780] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
339 [    0.134783] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
340 [    0.135051] pnp 00:01: [dma 4]
341 [    0.135067] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
342 [    0.135086] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
343 [    0.135154] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
344 [    0.135156] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
345 [    0.135180] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
346 [    0.135204] system 00:05: [io  0x0500-0x057f] could not be reserved
347 [    0.135206] system 00:05: [io  0x0480-0x04bf] has been reserved
348 [    0.135208] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
349 [    0.135223] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
350 [    0.135249] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
351 [    0.135273] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
352 [    0.135281] pnp: PnP ACPI: found 9 devices
353 [    0.135282] ACPI: bus type PNP unregistered
354 [    0.141138] pci 0000:00:1c.2: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
355 [    0.141140] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
356 [    0.141142] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
357 [    0.141147] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
358 [    0.141148] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
359 [    0.141150] pci 0000:00:1c.2: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
360 [    0.141154] pci 0000:00:1c.2: BAR 14: assigned [mem 0xafa00000-0xafbfffff]
361 [    0.141157] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref]
362 [    0.141159] pci 0000:00:1c.2: BAR 13: assigned [io  0x2000-0x2fff]
363 [    0.141161] pci 0000:00:1c.0: PCI bridge to [bus 01]
364 [    0.141168] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
365 [    0.141179] pci 0000:00:1c.1: PCI bridge to [bus 02]
366 [    0.141186] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff]
367 [    0.141198] pci 0000:00:1c.2: PCI bridge to [bus 03]
368 [    0.141201] pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
369 [    0.141207] pci 0000:00:1c.2:   bridge window [mem 0xafa00000-0xafbfffff]
370 [    0.141212] pci 0000:00:1c.2:   bridge window [mem 0xafc00000-0xafdfffff 64bit pref]
371 [    0.141220] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
372 [    0.141222] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
373 [    0.141223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
374 [    0.141224] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
375 [    0.141226] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
376 [    0.141227] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
377 [    0.141228] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
378 [    0.141229] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
379 [    0.141231] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
380 [    0.141232] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
381 [    0.141233] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
382 [    0.141235] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
383 [    0.141236] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
384 [    0.141237] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
385 [    0.141238] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
386 [    0.141240] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
387 [    0.141241] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfebfffff]
388 [    0.141242] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
389 [    0.141244] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
390 [    0.141245] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
391 [    0.141247] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
392 [    0.141248] pci_bus 0000:03: resource 1 [mem 0xafa00000-0xafbfffff]
393 [    0.141249] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafdfffff 64bit pref]
394 [    0.141299] NET: Registered protocol family 2
395 [    0.141527] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
396 [    0.141815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
397 [    0.141920] TCP: Hash tables configured (established 131072 bind 65536)
398 [    0.141936] TCP: reno registered
399 [    0.141951] UDP hash table entries: 8192 (order: 6, 262144 bytes)
400 [    0.141996] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
401 [    0.142092] NET: Registered protocol family 1
402 [    0.142103] pci 0000:00:02.0: Boot video device
403 [    0.142169] pci 0000:00:14.0: can't derive routing for PCI INT A
404 [    0.142170] pci 0000:00:14.0: PCI INT A: no GSI
405 [    0.142245] pci 0000:00:14.0: can't derive routing for PCI INT A
406 [    0.142494] PCI: CLS 64 bytes, default 64
407 [    0.142527] Unpacking initramfs...
408 [    0.368738] Freeing initrd memory: 15660K (ffff88003615a000 - ffff8800370a5000)
409 [    0.368744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
410 [    0.368746] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff]
411 [    0.369086] audit: initializing netlink socket (disabled)
412 [    0.369096] type=2000 audit(1390405714.364:1): initialized
413 [    0.380003] HugeTLB registered 2 MB page size, pre-allocated 0 pages
414 [    0.380711] VFS: Disk quotas dquot_6.5.2
415 [    0.380729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
416 [    0.380789] msgmni has been set to 32005
417 [    0.381007] alg: No test for stdrng (krng)
418 [    0.381028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
419 [    0.381057] io scheduler noop registered
420 [    0.381059] io scheduler deadline registered
421 [    0.381074] io scheduler cfq registered (default)
422 [    0.381214] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
423 [    0.381365] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
424 [    0.381443] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
425 [    0.381518] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
426 [    0.381631] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
427 [    0.381632] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
428 [    0.381633] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
429 [    0.381639] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
430 [    0.381659] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
431 [    0.381660] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
432 [    0.381665] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
433 [    0.381685] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
434 [    0.381689] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
435 [    0.381697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
436 [    0.381730] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 1e14 ss_vid 8086 ss_did 1e14
437 [    0.381756] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
438 [    0.381760] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
439 [    0.381778] intel_idle: MWAIT substates: 0x21120
440 [    0.381779] intel_idle: v0.4 model 0x3A
441 [    0.381780] intel_idle: lapic_timer_reliable_states 0xffffffff
442 [    0.381870] GHES: HEST is not enabled!
443 [    0.381926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
444 [    0.382244] Linux agpgart interface v0.103
445 [    0.382304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
446 [    0.384601] serio: i8042 KBD port at 0x60,0x64 irq 1
447 [    0.384605] serio: i8042 AUX port at 0x60,0x64 irq 12
448 [    0.384690] mousedev: PS/2 mouse device common for all mice
449 [    0.384719] rtc_cmos 00:06: RTC can wake from S4
450 [    0.384840] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
451 [    0.384867] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
452 [    0.384872] Intel P-state driver initializing.
453 [    0.384880] Intel pstate controlling: cpu 0
454 [    0.384896] Intel pstate controlling: cpu 1
455 [    0.384903] Intel pstate controlling: cpu 2
456 [    0.384913] Intel pstate controlling: cpu 3
457 [    0.384931] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
458 [    0.384932] AMD IOMMUv2 functionality not available on this system
459 [    0.384993] TCP: cubic registered
460 [    0.385060] NET: Registered protocol family 10
461 [    0.385200] mip6: Mobile IPv6
462 [    0.385202] NET: Registered protocol family 17
463 [    0.385204] mpls_gso: MPLS GSO support
464 [    0.385378] registered taskstats version 1
465 [    0.386218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
466 [    0.386499] rtc_cmos 00:06: setting system clock to 2014-01-22 15:48:34 UTC (1390405714)
467 [    0.386524] PM: Hibernation image not present or could not be loaded.
468 [    0.386974] Freeing unused kernel memory: 972K (ffffffff818a8000 - ffffffff8199b000)
469 [    0.386975] Write protecting the kernel read-only data: 8192k
470 [    0.389439] Freeing unused kernel memory: 1432K (ffff88000149a000 - ffff880001600000)
471 [    0.390244] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
472 [    0.476118] systemd-udevd[70]: starting version 204
473 [    0.494118] ACPI: bus type USB registered
474 [    0.494151] usbcore: registered new interface driver usbfs
475 [    0.494168] usbcore: registered new interface driver hub
476 [    0.495579] usbcore: registered new device driver usb
477 [    0.495986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
478 [    0.496165] ehci-pci: EHCI PCI platform driver
479 [    0.497029] ehci-pci 0000:00:1a.0: setting latency timer to 64
480 [    0.497043] ehci-pci 0000:00:1a.0: EHCI Host Controller
481 [    0.497052] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
482 [    0.497070] ehci-pci 0000:00:1a.0: debug port 2
483 [    0.497748] pps_core: LinuxPPS API ver. 1 registered
484 [    0.497750] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
485 [    0.497950] PTP clock support registered
486 [    0.498608] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
487 [    0.498610] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
488 [    0.500984] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
489 [    0.501009] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
490 [    0.501074] thermal LNXTHERM:00: registered as thermal_zone0
491 [    0.501076] ACPI: Thermal Zone [THM0] (61 C)
492 [    0.503698] SCSI subsystem initialized
493 [    0.505384] thermal LNXTHERM:01: registered as thermal_zone1
494 [    0.505389] ACPI: Thermal Zone [THM1] (27 C)
495 [    0.506250] sdhci: Secure Digital Host Controller Interface driver
496 [    0.506252] sdhci: Copyright(c) Pierre Ossman
497 [    0.506508] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
498 [    0.506987] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
499 [    0.508262] libata version 3.00 loaded.
500 [    0.510074] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
501 [    0.510157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
502 [    0.510161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
503 [    0.510164] usb usb1: Product: EHCI Host Controller
504 [    0.510166] usb usb1: Manufacturer: Linux 3.12-rc7-amd64 ehci_hcd
505 [    0.510169] usb usb1: SerialNumber: 0000:00:1a.0
506 [    0.510374] hub 1-0:1.0: USB hub found
507 [    0.510385] hub 1-0:1.0: 3 ports detected
508 [    0.510674] ehci-pci 0000:00:1d.0: setting latency timer to 64
509 [    0.510682] ehci-pci 0000:00:1d.0: EHCI Host Controller
510 [    0.510689] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
511 [    0.510705] ehci-pci 0000:00:1d.0: debug port 2
512 [    0.514612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
513 [    0.514706] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
514 [    0.521930] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
515 [    0.526113] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
516 [    0.526180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
517 [    0.526183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
518 [    0.526186] usb usb2: Product: EHCI Host Controller
519 [    0.526188] usb usb2: Manufacturer: Linux 3.12-rc7-amd64 ehci_hcd
520 [    0.526190] usb usb2: SerialNumber: 0000:00:1d.0
521 [    0.526422] hub 2-0:1.0: USB hub found
522 [    0.526502] hub 2-0:1.0: 3 ports detected
523 [    0.526996] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
524 [    0.526999] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
525 [    0.527027] xhci_hcd 0000:00:14.0: setting latency timer to 64
526 [    0.527031] xhci_hcd 0000:00:14.0: xHCI Host Controller
527 [    0.527038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
528 [    0.527149] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
529 [    0.527174] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
530 [    0.527264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
531 [    0.527268] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
532 [    0.527270] usb usb3: Product: xHCI Host Controller
533 [    0.527272] usb usb3: Manufacturer: Linux 3.12-rc7-amd64 xhci_hcd
534 [    0.527275] usb usb3: SerialNumber: 0000:00:14.0
535 [    0.527450] hub 3-0:1.0: USB hub found
536 [    0.527468] hub 3-0:1.0: 4 ports detected
537 [    0.527608] xhci_hcd 0000:00:14.0: xHCI Host Controller
538 [    0.527613] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
539 [    0.527716] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
540 [    0.527718] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
541 [    0.527719] usb usb4: Product: xHCI Host Controller
542 [    0.527721] usb usb4: Manufacturer: Linux 3.12-rc7-amd64 xhci_hcd
543 [    0.527722] usb usb4: SerialNumber: 0000:00:14.0
544 [    0.527868] hub 4-0:1.0: USB hub found
545 [    0.527885] hub 4-0:1.0: 4 ports detected
546 [    0.530999] e1000e 0000:00:19.0: setting latency timer to 64
547 [    0.531065] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
548 [    0.531092] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
549 [    0.730299] e1000e 0000:00:19.0 eth0: registered PHC clock
550 [    0.730303] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
551 [    0.730305] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
552 [    0.730366] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
553 [    0.730425] ahci 0000:00:1f.2: version 3.0
554 [    0.730524] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
555 [    0.730550] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
556 [    0.730572] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
557 [    0.730573] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
558 [    0.730577] ahci 0000:00:1f.2: setting latency timer to 64
559 [    0.730995] scsi0 : ahci
560 [    0.731077] scsi1 : ahci
561 [    0.731148] scsi2 : ahci
562 [    0.731217] scsi3 : ahci
563 [    0.731286] scsi4 : ahci
564 [    0.731351] scsi5 : ahci
565 [    0.731374] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 45
566 [    0.731376] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 45
567 [    0.731377] ata3: DUMMY
568 [    0.731378] ata4: DUMMY
569 [    0.731379] ata5: DUMMY
570 [    0.731379] ata6: DUMMY
571 [    0.822580] usb 1-1: new high-speed USB device number 2 using ehci-pci
572 [    0.955384] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
573 [    0.955389] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
574 [    0.955715] hub 1-1:1.0: USB hub found
575 [    0.955881] hub 1-1:1.0: 6 ports detected
576 [    1.050829] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
577 [    1.051230] ata1.00: supports DRM functions and may not be fully accessible
578 [    1.051466] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
579 [    1.051469] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
580 [    1.052422] ata1.00: supports DRM functions and may not be fully accessible
581 [    1.053251] ata1.00: configured for UDMA/133
582 [    1.053546] scsi 0:0:0:0: Direct-Access     ATA      Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
583 [    1.066899] usb 2-1: new high-speed USB device number 2 using ehci-pci
584 [    1.199589] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
585 [    1.199595] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
586 [    1.200020] hub 2-1:1.0: USB hub found
587 [    1.200196] hub 2-1:1.0: 8 ports detected
588 [    1.271348] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
589 [    1.364711] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
590 [    1.364717] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
591 [    1.364720] usb 1-1.3: Product: Biometric Coprocessor
592 [    1.364722] usb 1-1.3: Manufacturer: Auth
593 [    1.367155] tsc: Refined TSC clocksource calibration: 2793.654 MHz
594 [    1.371207] ata2: SATA link down (SStatus 0 SControl 300)
595 [    1.386248] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
596 [    1.386253] sd 0:0:0:0: [sda] 4096-byte physical blocks
597 [    1.386406] sd 0:0:0:0: [sda] Write Protect is off
598 [    1.386409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
599 [    1.386444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
600 [    1.388281]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
601 [    1.389261] sd 0:0:0:0: [sda] Attached SCSI disk
602 [    1.390914] sd 0:0:0:0: Attached scsi generic sg0 type 0
603 [    1.435337] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
604 [    1.455969] device-mapper: uevent: version 1.0.3
605 [    1.456037] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
606 [    1.527326] raid6: sse2x1    7166 MB/s
607 [    1.531072] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
608 [    1.531075] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
609 [    1.531077] usb 1-1.4: Product: BCM20702A0
610 [    1.531078] usb 1-1.4: Manufacturer: Broadcom Corp
611 [    1.531080] usb 1-1.4: SerialNumber: 2016D8D6A3C7
612 [    1.595402] raid6: sse2x2   10683 MB/s
613 [    1.603539] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
614 [    1.663493] raid6: sse2x4   13895 MB/s
615 [    1.663495] raid6: using algorithm sse2x4 (13895 MB/s)
616 [    1.663496] raid6: using ssse3x2 recovery algorithm
617 [    1.663719] xor: automatically using best checksumming function:
618 [    1.703159] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
619 [    1.703161] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
620 [    1.703162] usb 1-1.6: Product: Integrated Camera
621 [    1.703164] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
622 [    1.703533]    avx       : 26887.000 MB/sec
623 [    1.705494] bio: create slab <bio-1> at 1
624 [    1.705642] Btrfs loaded
625 [    1.713362] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
626 [    1.714589] XFS (sda4): Mounting Filesystem
627 [    1.737835] XFS (sda4): Ending clean mount
628 [    1.775874] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
629 [    1.879134] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
630 [    1.879138] usb 2-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
631 [    1.879140] usb 2-1.4: Product: Qualcomm Gobi 2000
632 [    1.879141] usb 2-1.4: Manufacturer: Qualcomm Incorporated
633 [    1.883506] systemd-udevd[417]: starting version 204
634 [    1.952748] ACPI: Requesting acpi_cpufreq
635 [    1.955752] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input1
636 [    1.955758] ACPI: Sleep Button [SLPB]
637 [    1.955831] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input2
638 [    1.955994] ACPI: Lid Switch [LID]
639 [    1.956040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
640 [    1.956043] ACPI: Power Button [PWRF]
641 [    1.960717] mei_me 0000:00:16.0: setting latency timer to 64
642 [    1.960754] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
643 [    1.965073] [drm] Initialized drm 1.1.0 20060810
644 [    1.977201] Non-volatile memory driver v1.3
645 [    1.980096] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
646 [    1.985159] cfg80211: Calling CRDA to update world regulatory domain
647 [    1.986686] input: PC Speaker as /devices/platform/pcspkr/input/input4
648 [    1.988252] Intel(R) Wireless WiFi driver for Linux, in-tree:
649 [    1.988255] Copyright(c) 2003-2013 Intel Corporation
650 [    1.989251] udevd[577]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
651 [    1.996616] udevd[597]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
652 [    1.997361] ACPI: AC Adapter [AC] (on-line)
653 [    1.997856] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
654 [    1.998511] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
655 [    1.999280] udevd[605]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
656 [    2.001466] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-6000g2a-6.ucode into memory
657 [    2.001611] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
658 [    2.006926] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
659 [    2.007372] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
660 [    2.007430] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
661 [    2.007478] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
662 [    2.007531] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
663 [    2.007580] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
664 [    2.007623] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
665 [    2.007673] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
666 [    2.008359] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
667 [    2.008363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
668 [    2.008366] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
669 [    2.008368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
670 [    2.008368] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
671 [    2.008370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
672 [    2.008371] lpc_ich: Resource conflict(s) found affecting gpio_ich
673 [    2.011209] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
674 [    2.011212] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
675 [    2.011214] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
676 [    2.011216] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
677 [    2.011302] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
678 [    2.020483] udevd[647]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
679 [    2.026775] udevd[660]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
680 [    2.028220] udevd[661]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
681 [    2.029996] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
682 [    2.030239] acpi device:07: registered as cooling_device4
683 [    2.030302] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
684 [    2.030306] thinkpad_acpi: ThinkPad ACPI Extras v0.24
685 [    2.030307] thinkpad_acpi: http://ibm-acpi.sf.net/
686 [    2.030309] thinkpad_acpi: ThinkPad BIOS CBET4000 coreboot, EC unknown
687 [    2.030310] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
688 [    2.030341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
689 [    2.031440] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
690 [    2.031467] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
691 [    2.031469] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
692 [    2.036228] media: Linux media interface: v0.10
693 [    2.037131] usbcore: registered new interface driver usbserial
694 [    2.037143] usbcore: registered new interface driver usbserial_generic
695 [    2.037151] usbserial: USB Serial support registered for generic
696 [    2.038015] Linux video capture interface: v2.00
697 [    2.039013] ACPI: Battery Slot [BAT0] (battery present)
698 [    2.039094] usbcore: registered new interface driver qcserial
699 [    2.039105] usbserial: USB Serial support registered for Qualcomm USB modem
700 [    2.039125] ACPI: Battery Slot [BAT1] (battery absent)
701 [    2.039228] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
702 [    2.040287] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
703 [    2.040964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
704 [    2.041885] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
705 [    2.042016] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
706 [    2.042113] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14
707 [    2.042188] [drm] Memory usable by graphics device = 2048M
708 [    2.042194] i915 0000:00:02.0: setting latency timer to 64
709 [    2.042507] usbcore: registered new interface driver cdc_wdm
710 [    2.043123] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
711 [    2.050172] udevd[695]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
712 [    2.060420] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
713 [    2.060459] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15
714 [    2.060509] usbcore: registered new interface driver uvcvideo
715 [    2.060511] USB Video Class driver (1.1.1)
716 [    2.060881] udevd[716]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
717 [    2.061226] i915 0000:00:02.0: irq 49 for MSI/MSI-X
718 [    2.061234] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
719 [    2.061235] [drm] Driver supports precise vblank timestamp query.
720 [    2.061237] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
721 [    2.061301] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
722 [    2.061312] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
723 [    2.063893] udevd[719]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
724 [    2.064422] qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device
725 [    2.064547] qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, ae:1c:c7:97:fc:3b
726 [    2.064572] usbcore: registered new interface driver qmi_wwan
727 [    2.064815] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
728 [    2.066228] udevd[733]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
729 [    2.067337] Bluetooth: Core ver 2.16
730 [    2.067349] NET: Registered protocol family 31
731 [    2.067350] Bluetooth: HCI device and connection manager initialized
732 [    2.067357] Bluetooth: HCI socket layer initialized
733 [    2.067359] Bluetooth: L2CAP socket layer initialized
734 [    2.067363] Bluetooth: SCO socket layer initialized
735 [    2.088480] usbcore: registered new interface driver btusb
736 [    2.089909] udevd[787]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
737 [    2.099244] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
738 [    2.099383] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
739 [    2.112265] iTCO_vendor_support: vendor-support=0
740 [    2.113351] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
741 [    2.113379] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
742 [    2.114582] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
743 [    2.120952] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
744 [    2.121185] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
745 [    2.121635] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
746 [    2.121738] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
747 [    2.121986] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
748 [    2.122150] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
749 [    2.130479] cfg80211: World regulatory domain updated:
750 [    2.130482] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
751 [    2.130483] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
752 [    2.130484] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
753 [    2.130485] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
754 [    2.130486] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
755 [    2.130486] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
756 [    2.188202] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
757 [    2.205632] fbcon: inteldrmfb (fb0) is primary device
758 [    2.368615] Switched to clocksource tsc
759 [    2.870211] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
760 [    2.870228] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
761 [    2.909589] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
762 [    3.000413] Console: switching to colour frame buffer device 170x48
763 [    3.003624] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
764 [    3.003626] i915 0000:00:02.0: registered panic notifier
765 [    3.003644] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
766 [    3.798444] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
767 [    5.780403] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
768 [    7.085614] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
769 [    7.285928] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
770 [    9.463111] bio: create slab <bio-2> at 2
771 [    9.530882] bio: create slab <bio-2> at 2
772 [    9.586054] loop: module loaded
773 [    9.593053] fuse init (API version 7.22)
774 [    9.693306] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
775 [    9.696195] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
776 [    9.696716] XFS (dm-0): Mounting Filesystem
777 [    9.720269] XFS (dm-0): Ending clean mount
778 [    9.734118] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
779 [    9.734789] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
780 [   10.426632] Bluetooth: RFCOMM TTY layer initialized
781 [   10.426644] Bluetooth: RFCOMM socket layer initialized
782 [   10.426646] Bluetooth: RFCOMM ver 1.11
783 [   10.430669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
784 [   10.430671] Bluetooth: BNEP filters: protocol multicast
785 [   10.430677] Bluetooth: BNEP socket layer initialized
786 [   10.991544] systemd-logind[3179]: New seat seat0.
787 [   10.992039] systemd-logind[3179]: Watching system buttons on /dev/input/event3 (Power Button)
788 [   10.992085] systemd-logind[3179]: Watching system buttons on /dev/input/event13 (Video Bus)
789 [   10.992123] systemd-logind[3179]: Watching system buttons on /dev/input/event2 (Lid Switch)
790 [   10.992161] systemd-logind[3179]: Watching system buttons on /dev/input/event1 (Sleep Button)
791 [   10.992197] systemd-logind[3179]: Watching system buttons on /dev/input/event14 (ThinkPad Extra Buttons)
792 [   10.992659] systemd-logind[3179]: New session 1 of user Debian-gdm.
793 [   10.992713] systemd-logind[3179]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
794 [   11.092174] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
795 [   11.195352] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
796 [   11.195624] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
797 [   11.198424] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
798 [   11.205294] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
799 [   11.269550] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
800 [   11.471097] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
801 [   11.477983] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
802 [   11.552129] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
803 [   14.447419] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_ABORT_CMD: time out after 2000ms.
804 [   14.447425] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 30 write_ptr 31
805 [   14.735114] iwlwifi 0000:02:00.0: HCMD_ACTIVE already clear for command REPLY_RXON
806 [   14.869499] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
807 [   14.876365] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
808 [   14.956205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
809 [   15.076996] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
810 [   15.180390] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
811 [   15.180637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
812 [   20.311588] systemd-logind[3179]: New session c1 of user phcoder.
813 [   21.505584] wlan0: authenticate with 00:24:37:96:06:b0
814 [   21.514325] wlan0: send auth to 00:24:37:96:06:b0 (try 1/3)
815 [   21.580932] wlan0: authenticated
816 [   21.581205] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
817 [   21.581210] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
818 [   21.584259] wlan0: associate with 00:24:37:96:06:b0 (try 1/3)
819 [   21.587091] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=1)
820 [   21.590203] wlan0: associated
821 [   21.590230] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready