hp/pavilion_m6_1035dx/4.0-5780-g288c958/2014-04-17T02:42:44Z
[board-status.git] / lenovo / x201 / 4.0-5405-gdec9198 / 2014-02-01T17:38:32Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
4 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
5 [    0.000000] BIOS-provided physical RAM map:
6 [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
7 [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
8 [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
9 [    0.000000]  BIOS-e820: 0000000000100000 - 00000000b76d0000 (usable)
10 [    0.000000]  BIOS-e820: 00000000b76d0000 - 00000000b8000000 (reserved)
11 [    0.000000]  BIOS-e820: 00000000b9c00000 - 00000000bc000000 (reserved)
12 [    0.000000]  BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
13 [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fee00000 (reserved)
14 [    0.000000] NX (Execute Disable) protection: active
15 [    0.000000] SMBIOS 2.7 present.
16 [    0.000000] DMI: LENOVO 3626EN1, BIOS 4.0-5405-gdec9198 02/01/2014
17 [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
18 [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
19 [    0.000000] No AGP bridge found
20 [    0.000000] last_pfn = 0xb76d0 max_arch_pfn = 0x400000000
21 [    0.000000] MTRR default type: write-back
22 [    0.000000] MTRR fixed ranges enabled:
23 [    0.000000]   00000-9FFFF write-back
24 [    0.000000]   A0000-BFFFF uncachable
25 [    0.000000]   C0000-FFFFF write-back
26 [    0.000000] MTRR variable ranges enabled:
27 [    0.000000]   0 base 0B7800000 mask FFF800000 uncachable
28 [    0.000000]   1 base 0B8000000 mask FF8000000 uncachable
29 [    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
30 [    0.000000]   3 disabled
31 [    0.000000]   4 disabled
32 [    0.000000]   5 disabled
33 [    0.000000]   6 disabled
34 [    0.000000]   7 disabled
35 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
36 [    0.000000] found SMP MP-table at [ffff8800000fde70] fde70
37 [    0.000000] initial memory mapped : 0 - 20000000
38 [    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
39 [    0.000000] init_memory_mapping: 0000000000000000-00000000b76d0000
40 [    0.000000]  0000000000 - 00b7600000 page 2M
41 [    0.000000]  00b7600000 - 00b76d0000 page 4k
42 [    0.000000] kernel direct mapping tables up to b76d0000 @ 1fffb000-20000000
43 [    0.000000] RAMDISK: 36bfa000 - 375f5000
44 [    0.000000] ACPI: RSDP 00000000000fde40 00024 (v02 CORE  )
45 [    0.000000] ACPI: XSDT 00000000b76e2ee0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
46 [    0.000000] ACPI: HPET 00000000b76e3010 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
47 [    0.000000] ACPI: APIC 00000000b76e3050 00084 (v01 CORE   COREBOOT 00000000 CORE 00000000)
48 [    0.000000] ACPI: MCFG 00000000b76e30e0 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
49 [    0.000000] ACPI: FACP 00000000b76e6d60 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
50 [    0.000000] ACPI: DSDT 00000000b76e3160 03AF1 (v03 COREv4 COREBOOT 20130325 INTL 20140114)
51 [    0.000000] ACPI: FACS 00000000b76e3120 00040
52 [    0.000000] ACPI: SSDT 00000000b76e6e60 00C34 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
53 [    0.000000] ACPI: Local APIC address 0xfee00000
54 [    0.000000] No NUMA configuration found
55 [    0.000000] Faking a node at 0000000000000000-00000000b76d0000
56 [    0.000000] Initmem setup node 0 0000000000000000-00000000b76d0000
57 [    0.000000]   NODE_DATA [00000000b76cb000 - 00000000b76cffff]
58 [    0.000000]  [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800b4000000-ffff8800b69fffff] on node 0
59 [    0.000000] Zone PFN ranges:
60 [    0.000000]   DMA      0x00000010 -> 0x00001000
61 [    0.000000]   DMA32    0x00001000 -> 0x00100000
62 [    0.000000]   Normal   empty
63 [    0.000000] Movable zone start PFN for each node
64 [    0.000000] early_node_map[2] active PFN ranges
65 [    0.000000]     0: 0x00000010 -> 0x0000009f
66 [    0.000000]     0: 0x00000100 -> 0x000b76d0
67 [    0.000000] On node 0 totalpages: 751199
68 [    0.000000]   DMA zone: 56 pages used for memmap
69 [    0.000000]   DMA zone: 5 pages reserved
70 [    0.000000]   DMA zone: 3922 pages, LIFO batch:0
71 [    0.000000]   DMA32 zone: 10216 pages used for memmap
72 [    0.000000]   DMA32 zone: 737000 pages, LIFO batch:31
73 [    0.000000] ACPI: PM-Timer IO Port: 0x508
74 [    0.000000] ACPI: Local APIC address 0xfee00000
75 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
76 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
77 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
78 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
79 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
80 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
81 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
82 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
83 [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
84 [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
85 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
86 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
87 [    0.000000] ACPI: IRQ0 used by override.
88 [    0.000000] ACPI: IRQ2 used by override.
89 [    0.000000] ACPI: IRQ9 used by override.
90 [    0.000000] Using ACPI (MADT) for SMP configuration information
91 [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
92 [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
93 [    0.000000] nr_irqs_gsi: 40
94 [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
95 [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
96 [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
97 [    0.000000] Allocating PCI resources starting at bc000000 (gap: bc000000:14000000)
98 [    0.000000] Booting paravirtualized kernel on bare hardware
99 [    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
100 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s82944 r8192 d23552 u524288
101 [    0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
102 [    0.000000] pcpu-alloc: [0] 0 1 2 3 
103 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 740922
104 [    0.000000] Policy zone: DMA32
105 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
106 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
107 [    0.000000] Checking aperture...
108 [    0.000000] No AGP bridge found
109 [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
110 [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
111 [    0.000000] Memory: 2942592k/3005248k available (3426k kernel code, 452k absent, 62204k reserved, 3312k data, 576k init)
112 [    0.000000] Hierarchical RCU implementation.
113 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
114 [    0.000000] NR_IRQS:33024 nr_irqs:712 16
115 [    0.000000] Extended CMOS year: 300
116 [    0.000000] WARNING: Persistent clock returned invalid value!
117 [    0.000000]          Check your CMOS/BIOS settings.
118 [    0.000000] Console: colour VGA+ 80x25
119 [    0.000000] console [tty0] enabled
120 [    0.000000] hpet clockevent registered
121 [    0.000000] Fast TSC calibration using PIT
122 [    0.004000] Detected 2128.029 MHz processor.
123 [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.05 BogoMIPS (lpj=8512116)
124 [    0.000007] pid_max: default: 32768 minimum: 301
125 [    0.000047] Security Framework initialized
126 [    0.000052] AppArmor: AppArmor disabled by boot time parameter
127 [    0.000315] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
128 [    0.001960] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
129 [    0.002714] Mount-cache hash table entries: 256
130 [    0.002843] Initializing cgroup subsys cpuacct
131 [    0.002848] Initializing cgroup subsys memory
132 [    0.002860] Initializing cgroup subsys devices
133 [    0.002864] Initializing cgroup subsys freezer
134 [    0.002866] Initializing cgroup subsys net_cls
135 [    0.002868] Initializing cgroup subsys blkio
136 [    0.002874] Initializing cgroup subsys perf_event
137 [    0.002904] CPU: Physical Processor ID: 0
138 [    0.002905] CPU: Processor Core ID: 0
139 [    0.002911] mce: CPU supports 9 MCE banks
140 [    0.002924] CPU0: Thermal monitoring enabled (TM1)
141 [    0.002932] using mwait in idle threads.
142 [    0.003365] ACPI: Core revision 20110623
143 [    0.006955] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
144 [    0.046623] CPU0: Intel(R) Core(TM) i7 CPU       L 640  @ 2.13GHz stepping 02
145 [    0.151668] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
146 [    0.151676] ... version:                3
147 [    0.151678] ... bit width:              48
148 [    0.151679] ... generic registers:      4
149 [    0.151680] ... value mask:             0000ffffffffffff
150 [    0.151682] ... max period:             000000007fffffff
151 [    0.151683] ... fixed-purpose events:   3
152 [    0.151685] ... event mask:             000000070000000f
153 [    0.151890] NMI watchdog enabled, takes one hw-pmu counter.
154 [    0.152015] Booting Node   0, Processors  #1
155 [    0.152018] smpboot cpu 1: start_ip = 9a000
156 [    0.259770] NMI watchdog enabled, takes one hw-pmu counter.
157 [    0.259915]  #2
158 [    0.259917] smpboot cpu 2: start_ip = 9a000
159 [    0.367682] NMI watchdog enabled, takes one hw-pmu counter.
160 [    0.367821]  #3 Ok.
161 [    0.367822] smpboot cpu 3: start_ip = 9a000
162 [    0.475690] NMI watchdog enabled, takes one hw-pmu counter.
163 [    0.475735] Brought up 4 CPUs
164 [    0.475737] Total of 4 processors activated (17023.80 BogoMIPS).
165 [    0.478861] devtmpfs: initialized
166 [    0.483069] print_constraints: dummy: 
167 [    0.483136] NET: Registered protocol family 16
168 [    0.483246] ACPI: bus type pci registered
169 [    0.483314] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
170 [    0.483317] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
171 [    0.496742] PCI: Using configuration type 1 for base access
172 [    0.497555] bio: create slab <bio-0> at 0
173 [    0.497666] ACPI: Added _OSI(Module Device)
174 [    0.497668] ACPI: Added _OSI(Processor Device)
175 [    0.497671] ACPI: Added _OSI(3.0 _SCP Extensions)
176 [    0.497673] ACPI: Added _OSI(Processor Aggregator Device)
177 [    0.498676] ACPI: EC: Look up EC in DSDT
178 [    0.502046] ACPI: Interpreter enabled
179 [    0.502050] ACPI: (supports S0 S3 S4 S5)
180 [    0.502078] ACPI: Using IOAPIC for interrupt routing
181 [    0.507139] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
182 [    0.507536] ACPI: ACPI Dock Station Driver: 1 docks/bays found
183 [    0.507539] HEST: Table not found.
184 [    0.507542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
185 [    0.507686] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
186 [    0.507893] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
187 [    0.507896] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
188 [    0.507898] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
189 [    0.507901] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
190 [    0.507903] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
191 [    0.507905] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
192 [    0.507908] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
193 [    0.507910] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
194 [    0.507912] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
195 [    0.507915] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
196 [    0.507917] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
197 [    0.507919] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
198 [    0.507922] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
199 [    0.507924] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
200 [    0.507926] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
201 [    0.507929] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
202 [    0.507931] pci_root PNP0A08:00: host bridge window [mem 0x00000000-0xfebfffff]
203 [    0.507933] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
204 [    0.507937] pci_root PNP0A08:00: host bridge window expanded to [mem 0x00000000-0xfebfffff]; [mem 0x00000000-0xfebfffff] ignored
205 [    0.507954] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
206 [    0.507974] DMAR: Disabling batched IOTLB flush on Ironlake
207 [    0.507998] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
208 [    0.508032] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
209 [    0.508048] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
210 [    0.508059] pci 0000:00:02.0: reg 10: [mem 0xcf800000-0xcfbfffff 64bit]
211 [    0.508066] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
212 [    0.508071] pci 0000:00:02.0: reg 20: [io  0x1840-0x1847]
213 [    0.508136] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
214 [    0.508164] pci 0000:00:16.0: reg 10: [mem 0xcfd27100-0xcfd2710f 64bit]
215 [    0.508254] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
216 [    0.508289] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200
217 [    0.508307] pci 0000:00:19.0: reg 10: [mem 0xcfd00000-0xcfd1ffff]
218 [    0.508315] pci 0000:00:19.0: reg 14: [mem 0xcfd24000-0xcfd24fff]
219 [    0.508325] pci 0000:00:19.0: reg 18: [io  0x1800-0x181f]
220 [    0.508385] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
221 [    0.508412] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
222 [    0.508433] pci 0000:00:1a.0: reg 10: [mem 0xcfd26800-0xcfd26bff]
223 [    0.508522] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
224 [    0.508548] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
225 [    0.508563] pci 0000:00:1b.0: reg 10: [mem 0xcfd20000-0xcfd23fff 64bit]
226 [    0.508629] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
227 [    0.508653] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
228 [    0.508723] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
229 [    0.508749] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
230 [    0.508814] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
231 [    0.508837] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
232 [    0.508902] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
233 [    0.508934] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
234 [    0.508954] pci 0000:00:1d.0: reg 10: [mem 0xcfd26c00-0xcfd26fff]
235 [    0.509038] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
236 [    0.509062] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
237 [    0.509128] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601
238 [    0.509251] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106
239 [    0.509275] pci 0000:00:1f.2: reg 10: [io  0x1848-0x184f]
240 [    0.509285] pci 0000:00:1f.2: reg 14: [io  0x1858-0x185b]
241 [    0.509295] pci 0000:00:1f.2: reg 18: [io  0x1850-0x1857]
242 [    0.509306] pci 0000:00:1f.2: reg 1c: [io  0x185c-0x185f]
243 [    0.509315] pci 0000:00:1f.2: reg 20: [io  0x1820-0x183f]
244 [    0.509326] pci 0000:00:1f.2: reg 24: [mem 0xcfd26000-0xcfd267ff]
245 [    0.509386] pci 0000:00:1f.2: PME# supported from D3hot
246 [    0.509410] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
247 [    0.509424] pci 0000:00:1f.3: reg 10: [mem 0xcfd27000-0xcfd270ff 64bit]
248 [    0.509445] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
249 [    0.509482] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
250 [    0.509505] pci 0000:00:1f.6: reg 10: [mem 0xcfd25000-0xcfd25fff 64bit]
251 [    0.509604] pci 0000:00:01.0: PCI bridge to [bus 01-01]
252 [    0.509644] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
253 [    0.509689] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
254 [    0.509858] pci 0000:04:00.0: [8086:4238] type 0 class 0x000280
255 [    0.509987] pci 0000:04:00.0: reg 10: [mem 0xcfc00000-0xcfc01fff 64bit]
256 [    0.510632] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
257 [    0.510848] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
258 [    0.510854] pci 0000:00:1c.4:   bridge window [mem 0xcfc00000-0xcfcfffff]
259 [    0.510917] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
260 [    0.510928] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
261 [    0.510930] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
262 [    0.510933] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfebfffff] (subtractive decode)
263 [    0.510936] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
264 [    0.510939] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
265 [    0.510941] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
266 [    0.510944] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
267 [    0.510947] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
268 [    0.510949] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
269 [    0.510953] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
270 [    0.510956] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
271 [    0.510958] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
272 [    0.510961] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
273 [    0.510964] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
274 [    0.510966] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
275 [    0.510969] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
276 [    0.510972] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
277 [    0.510993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
278 [    0.511249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
279 [    0.511560] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
280 [    0.511918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
281 [    0.512261]  pci0000:00: Requesting ACPI _OSC control (0x1d)
282 [    0.512307]  pci0000:00: ACPI _OSC control (0x1d) granted
283 [    0.516269] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
284 [    0.516319] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
285 [    0.516341] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
286 [    0.516364] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
287 [    0.516384] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
288 [    0.516404] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
289 [    0.516424] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
290 [    0.516459]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
291 [    0.516462]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
292 [    0.516464] ACPI _OSC control for PCIe not granted, disabling ASPM
293 [    0.516762] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
294 [    0.516819] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
295 [    0.516871] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
296 [    0.516923] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
297 [    0.516975] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
298 [    0.517027] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
299 [    0.517079] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
300 [    0.517131] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
301 [    0.517240] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
302 [    0.517251] vgaarb: loaded
303 [    0.517252] vgaarb: bridge control possible 0000:00:02.0
304 [    0.517303] PCI: Using ACPI for IRQ routing
305 [    0.526033] PCI: pci_cache_line_size set to 64 bytes
306 [    0.526154] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
307 [    0.526156] reserve RAM buffer: 00000000b76d0000 - 00000000b7ffffff 
308 [    0.526279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
309 [    0.526285] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
310 [    0.528306] Switching to clocksource hpet
311 [    0.530212] pnp: PnP ACPI init
312 [    0.530229] ACPI: bus type pnp registered
313 [    0.530330] pnp 00:00: [bus 00-ff]
314 [    0.530333] pnp 00:00: [io  0x0000-0x0cf7 window]
315 [    0.530336] pnp 00:00: [io  0x0cf8-0x0cff]
316 [    0.530338] pnp 00:00: [io  0x0d00-0xffff window]
317 [    0.530341] pnp 00:00: [mem 0x000a0000-0x000bffff window]
318 [    0.530343] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
319 [    0.530345] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
320 [    0.530349] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
321 [    0.530351] pnp 00:00: [mem 0x000cc000-0x000cffff window]
322 [    0.530353] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
323 [    0.530355] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
324 [    0.530357] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
325 [    0.530360] pnp 00:00: [mem 0x000dc000-0x000dffff window]
326 [    0.530362] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
327 [    0.530364] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
328 [    0.530366] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
329 [    0.530368] pnp 00:00: [mem 0x000ec000-0x000effff window]
330 [    0.530370] pnp 00:00: [mem 0x000f0000-0x000fffff window]
331 [    0.530372] pnp 00:00: [mem 0x00000000-0xfebfffff window]
332 [    0.530375] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
333 [    0.530424] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
334 [    0.530446] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
335 [    0.530448] pnp 00:01: [mem 0xfed10000-0xfed13fff]
336 [    0.530450] pnp 00:01: [mem 0xfed18000-0xfed18fff]
337 [    0.530452] pnp 00:01: [mem 0xfed19000-0xfed19fff]
338 [    0.530454] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
339 [    0.530456] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
340 [    0.530458] pnp 00:01: [mem 0xfed40000-0xfed44fff]
341 [    0.530460] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
342 [    0.530462] pnp 00:01: [mem 0x20000000-0x201fffff]
343 [    0.530464] pnp 00:01: [mem 0x40000000-0x401fffff]
344 [    0.530512] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
345 [    0.530515] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
346 [    0.530518] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
347 [    0.530521] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
348 [    0.530524] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
349 [    0.530527] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
350 [    0.530530] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
351 [    0.530533] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
352 [    0.530536] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved
353 [    0.530539] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved
354 [    0.530542] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
355 [    0.530981] pnp 00:02: [io  0x0000-0x001f]
356 [    0.530984] pnp 00:02: [io  0x0081-0x0091]
357 [    0.530986] pnp 00:02: [io  0x0093-0x009f]
358 [    0.530988] pnp 00:02: [io  0x00c0-0x00df]
359 [    0.530990] pnp 00:02: [dma 4]
360 [    0.531031] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
361 [    0.531041] pnp 00:03: [mem 0xff000000-0xffffffff]
362 [    0.531078] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
363 [    0.531159] pnp 00:04: [mem 0xfed00000-0xfed003ff]
364 [    0.531217] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
365 [    0.531221] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
366 [    0.531235] pnp 00:05: [io  0x00f0]
367 [    0.531244] pnp 00:05: [irq 13]
368 [    0.531282] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
369 [    0.531294] pnp 00:06: [io  0x002e-0x002f]
370 [    0.531296] pnp 00:06: [io  0x004e-0x004f]
371 [    0.531298] pnp 00:06: [io  0x0061]
372 [    0.531300] pnp 00:06: [io  0x0063]
373 [    0.531302] pnp 00:06: [io  0x0065]
374 [    0.531304] pnp 00:06: [io  0x0067]
375 [    0.531305] pnp 00:06: [io  0x0080]
376 [    0.531307] pnp 00:06: [io  0x0092]
377 [    0.531309] pnp 00:06: [io  0x00b2-0x00b3]
378 [    0.531311] pnp 00:06: [io  0x0500-0x057f]
379 [    0.531313] pnp 00:06: [io  0x0480-0x04bf]
380 [    0.531370] system 00:06: [io  0x0500-0x057f] has been reserved
381 [    0.531373] system 00:06: [io  0x0480-0x04bf] has been reserved
382 [    0.531376] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
383 [    0.531387] pnp 00:07: [io  0x0070-0x0077]
384 [    0.531426] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
385 [    0.531447] pnp 00:08: [io  0x0060]
386 [    0.531449] pnp 00:08: [io  0x0064]
387 [    0.531455] pnp 00:08: [irq 1]
388 [    0.531495] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
389 [    0.531515] pnp 00:09: [irq 12]
390 [    0.531553] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
391 [    0.531571] pnp 00:0a: [bus ff]
392 [    0.531617] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
393 [    0.531748] pnp: PnP ACPI: found 11 devices
394 [    0.531750] ACPI: ACPI bus type pnp unregistered
395 [    0.538698] PCI: max bus depth: 1 pci_try_num: 2
396 [    0.538738] pci 0000:00:1c.3: BAR 14: assigned [mem 0xbc000000-0xbc1fffff]
397 [    0.538742] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbc200000-0xbc3fffff 64bit pref]
398 [    0.538746] pci 0000:00:1c.3: BAR 13: assigned [io  0x2000-0x2fff]
399 [    0.538748] pci 0000:00:01.0: PCI bridge to [bus 01-01]
400 [    0.538754] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
401 [    0.538764] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
402 [    0.538767] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
403 [    0.538772] pci 0000:00:1c.3:   bridge window [mem 0xbc000000-0xbc1fffff]
404 [    0.538777] pci 0000:00:1c.3:   bridge window [mem 0xbc200000-0xbc3fffff 64bit pref]
405 [    0.538783] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
406 [    0.538788] pci 0000:00:1c.4:   bridge window [mem 0xcfc00000-0xcfcfffff]
407 [    0.538796] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
408 [    0.538818] pci 0000:00:01.0: setting latency timer to 64
409 [    0.538830] pci 0000:00:1c.0: setting latency timer to 64
410 [    0.538837] pci 0000:00:1c.3: enabling device (0000 -> 0003)
411 [    0.538846] pci 0000:00:1c.3: setting latency timer to 64
412 [    0.538854] pci 0000:00:1c.4: setting latency timer to 64
413 [    0.538859] pci 0000:00:1e.0: setting latency timer to 64
414 [    0.538863] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
415 [    0.538865] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
416 [    0.538868] pci_bus 0000:00: resource 6 [mem 0x00000000-0xfebfffff]
417 [    0.538870] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
418 [    0.538872] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
419 [    0.538874] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
420 [    0.538876] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
421 [    0.538879] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
422 [    0.538881] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
423 [    0.538883] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
424 [    0.538885] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
425 [    0.538887] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
426 [    0.538889] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
427 [    0.538892] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
428 [    0.538894] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
429 [    0.538896] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
430 [    0.538898] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
431 [    0.538901] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
432 [    0.538903] pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbc1fffff]
433 [    0.538905] pci_bus 0000:03: resource 2 [mem 0xbc200000-0xbc3fffff 64bit pref]
434 [    0.538908] pci_bus 0000:04: resource 1 [mem 0xcfc00000-0xcfcfffff]
435 [    0.538910] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
436 [    0.538912] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
437 [    0.538914] pci_bus 0000:05: resource 6 [mem 0x00000000-0xfebfffff]
438 [    0.538916] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
439 [    0.538919] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
440 [    0.538921] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
441 [    0.538923] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
442 [    0.538925] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
443 [    0.538927] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
444 [    0.538929] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
445 [    0.538932] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
446 [    0.538934] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
447 [    0.538936] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
448 [    0.538938] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
449 [    0.538940] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
450 [    0.538942] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
451 [    0.538945] pci_bus 0000:05: resource 20 [mem 0xfed40000-0xfed44fff]
452 [    0.539020] NET: Registered protocol family 2
453 [    0.539159] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
454 [    0.540070] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
455 [    0.543127] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
456 [    0.543512] TCP: Hash tables configured (established 524288 bind 65536)
457 [    0.543515] TCP reno registered
458 [    0.543524] UDP hash table entries: 2048 (order: 4, 65536 bytes)
459 [    0.543554] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
460 [    0.543709] NET: Registered protocol family 1
461 [    0.543729] pci 0000:00:02.0: Boot video device
462 [    0.543746] pci 0000:00:1a.0: enabling device (0004 -> 0006)
463 [    0.543797] pci 0000:00:1d.0: enabling device (0004 -> 0006)
464 [    0.543876] PCI: CLS 64 bytes, default 64
465 [    0.543932] Unpacking initramfs...
466 [    0.781646] Freeing initrd memory: 10220k freed
467 [    0.784584] audit: initializing netlink socket (disabled)
468 [    0.784602] type=2000 audit(0.628:1): initialized
469 [    0.800714] HugeTLB registered 2 MB page size, pre-allocated 0 pages
470 [    0.801425] VFS: Disk quotas dquot_6.5.2
471 [    0.801456] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
472 [    0.801533] msgmni has been set to 5767
473 [    0.801696] alg: No test for stdrng (krng)
474 [    0.801728] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
475 [    0.801732] io scheduler noop registered
476 [    0.801733] io scheduler deadline registered
477 [    0.801753] io scheduler cfq registered (default)
478 [    0.801850] pcieport 0000:00:01.0: setting latency timer to 64
479 [    0.801880] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
480 [    0.801947] pcieport 0000:00:1c.0: setting latency timer to 64
481 [    0.801981] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
482 [    0.802047] pcieport 0000:00:1c.3: setting latency timer to 64
483 [    0.802082] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
484 [    0.802161] pcieport 0000:00:1c.4: setting latency timer to 64
485 [    0.802196] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
486 [    0.802289] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
487 [    0.802292] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
488 [    0.802311] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
489 [    0.802316] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
490 [    0.802333] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
491 [    0.802337] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
492 [    0.802355] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
493 [    0.802357] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
494 [    0.802361] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
495 [    0.802379] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
496 [    0.802448] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 3b48 ss_vid 0 ss_did 0
497 [    0.802475] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
498 [    0.802483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
499 [    0.802485] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
500 [    0.802807] intel_idle: MWAIT substates: 0x21120
501 [    0.802809] intel_idle: v0.4 model 0x25
502 [    0.802811] intel_idle: lapic_timer_reliable_states 0xffffffff
503 [    0.802813] intel_idle: unaware of model 0x25 MWAIT 4 please contact lenb@kernel.org
504 [    0.802856] ERST: Table is not found!
505 [    0.802857] GHES: HEST is not enabled!
506 [    0.802914] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
507 [    0.984456] Linux agpgart interface v0.103
508 [    0.984540] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
509 [    0.984566] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
510 [    0.985465] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
511 [    0.985640] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
512 [    0.985790] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
513 [    0.990984] serio: i8042 KBD port at 0x60,0x64 irq 1
514 [    0.990994] serio: i8042 AUX port at 0x60,0x64 irq 12
515 [    0.991143] mousedev: PS/2 mouse device common for all mice
516 [    0.991194] rtc_cmos 00:07: RTC can wake from S4
517 [    0.991323] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
518 [    0.991353] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
519 [    0.991449] cpuidle: using governor ladder
520 [    0.991544] cpuidle: using governor menu
521 [    0.991757] TCP cubic registered
522 [    0.991919] NET: Registered protocol family 10
523 [    0.992636] Mobile IPv6
524 [    0.992639] NET: Registered protocol family 17
525 [    0.992643] Registering the dns_resolver key type
526 [    0.992820] PM: Hibernation image not present or could not be loaded.
527 [    0.992834] registered taskstats version 1
528 [    0.993455] rtc_cmos 00:07: setting system clock to 2014-02-01 17:41:02 UTC (1391276462)
529 [    0.993496] Initializing network drop monitor service
530 [    0.994865] Freeing unused kernel memory: 576k freed
531 [    0.994956] Write protecting the kernel read-only data: 6144k
532 [    0.997926] Freeing unused kernel memory: 652k freed
533 [    1.000966] Freeing unused kernel memory: 688k freed
534 [    1.001434] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
535 [    1.015102] udevd[58]: starting version 175
536 [    1.030955] usbcore: registered new interface driver usbfs
537 [    1.030990] usbcore: registered new interface driver hub
538 [    1.040547] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
539 [    1.040551] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
540 [    1.040603] e1000e 0000:00:19.0: setting latency timer to 64
541 [    1.040702] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
542 [    1.045201] SCSI subsystem initialized
543 [    1.047725] usbcore: registered new device driver usb
544 [    1.048244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
545 [    1.048799] thermal LNXTHERM:00: registered as thermal_zone0
546 [    1.048803] ACPI: Thermal Zone [THM0] (40 C)
547 [    1.050197] thermal LNXTHERM:01: registered as thermal_zone1
548 [    1.050200] ACPI: Thermal Zone [THM1] (27 C)
549 [    1.057691] libata version 3.00 loaded.
550 [    1.220584] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 5c:ff:35:04:d6:6d
551 [    1.220588] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
552 [    1.220632] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
553 [    1.220767] ehci_hcd 0000:00:1a.0: setting latency timer to 64
554 [    1.220772] ehci_hcd 0000:00:1a.0: EHCI Host Controller
555 [    1.220806] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
556 [    1.220843] ehci_hcd 0000:00:1a.0: debug port 2
557 [    1.224733] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
558 [    1.224762] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xcfd26800
559 [    1.240117] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
560 [    1.240159] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
561 [    1.240164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
562 [    1.240169] usb usb1: Product: EHCI Host Controller
563 [    1.240172] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
564 [    1.240175] usb usb1: SerialNumber: 0000:00:1a.0
565 [    1.240435] hub 1-0:1.0: USB hub found
566 [    1.240442] hub 1-0:1.0: 6 ports detected
567 [    1.240558] ehci_hcd 0000:00:1d.0: setting latency timer to 64
568 [    1.240563] ehci_hcd 0000:00:1d.0: EHCI Host Controller
569 [    1.240573] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
570 [    1.240604] ehci_hcd 0000:00:1d.0: debug port 2
571 [    1.244498] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
572 [    1.244518] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xcfd26c00
573 [    1.260120] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
574 [    1.260155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
575 [    1.260160] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
576 [    1.260164] usb usb2: Product: EHCI Host Controller
577 [    1.260168] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
578 [    1.260171] usb usb2: SerialNumber: 0000:00:1d.0
579 [    1.260438] hub 2-0:1.0: USB hub found
580 [    1.260446] hub 2-0:1.0: 8 ports detected
581 [    1.260547] ahci 0000:00:1f.2: version 3.0
582 [    1.260616] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
583 [    1.260665] ahci: SSS flag set, parallel bus scan disabled
584 [    1.260706] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
585 [    1.260712] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
586 [    1.260718] ahci 0000:00:1f.2: setting latency timer to 64
587 [    1.261763] scsi0 : ahci
588 [    1.261907] scsi1 : ahci
589 [    1.262009] scsi2 : ahci
590 [    1.262114] scsi3 : ahci
591 [    1.262214] scsi4 : ahci
592 [    1.262315] scsi5 : ahci
593 [    1.262458] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 45
594 [    1.262462] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 45
595 [    1.262464] ata3: DUMMY
596 [    1.262465] ata4: DUMMY
597 [    1.262468] ata5: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26300 irq 45
598 [    1.262471] ata6: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26380 irq 45
599 [    1.551988] usb 1-1: new high-speed USB device number 2 using ehci_hcd
600 [    1.579981] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
601 [    1.581378] ata1.00: ATA-8: ST9160310AS, SD04, max UDMA/133
602 [    1.581384] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
603 [    1.583118] ata1.00: configured for UDMA/133
604 [    1.583474] scsi 0:0:0:0: Direct-Access     ATA      ST9160310AS      SD04 PQ: 0 ANSI: 5
605 [    1.684610] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
606 [    1.684616] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
607 [    1.685143] hub 1-1:1.0: USB hub found
608 [    1.685327] hub 1-1:1.0: 6 ports detected
609 [    1.779898] Refined TSC clocksource calibration: 2128.000 MHz.
610 [    1.779906] Switching to clocksource tsc
611 [    1.795839] usb 2-1: new high-speed USB device number 2 using ehci_hcd
612 [    1.899838] ata2: SATA link down (SStatus 0 SControl 300)
613 [    1.928513] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
614 [    1.928519] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
615 [    1.929118] hub 2-1:1.0: USB hub found
616 [    1.929349] hub 2-1:1.0: 8 ports detected
617 [    1.999974] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
618 [    2.096304] usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=217f
619 [    2.096310] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
620 [    2.096314] usb 1-1.3: Product: Broadcom Bluetooth Device
621 [    2.096318] usb 1-1.3: Manufacturer: Broadcom Corp
622 [    2.096321] usb 1-1.3: SerialNumber: 78DD08B4DE0B
623 [    2.167907] usb 1-1.4: new full-speed USB device number 4 using ehci_hcd
624 [    2.219703] ata5: SATA link down (SStatus 0 SControl 300)
625 [    2.261372] usb 1-1.4: New USB device found, idVendor=147e, idProduct=2016
626 [    2.261378] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
627 [    2.261382] usb 1-1.4: Product: Biometric Coprocessor
628 [    2.261385] usb 1-1.4: Manufacturer: UPEK
629 [    2.331831] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
630 [    2.433925] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=4816
631 [    2.433931] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
632 [    2.433936] usb 1-1.6: Product: Integrated Camera
633 [    2.433939] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
634 [    2.507763] usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
635 [    2.539572] ata6: SATA link down (SStatus 0 SControl 300)
636 [    2.543973] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
637 [    2.544062] sd 0:0:0:0: [sda] Write Protect is off
638 [    2.544067] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
639 [    2.544121] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
640 [    2.601724] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
641 [    2.601730] usb 2-1.4: config 1 has no interface number 0
642 [    2.603822] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
643 [    2.603828] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
644 [    2.603832] usb 2-1.4: Product: Qualcomm Gobi 2000
645 [    2.603836] usb 2-1.4: Manufacturer: Qualcomm Incorporated
646 [    2.840491]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
647 [    2.841341] sd 0:0:0:0: [sda] Attached SCSI disk
648 [    2.842892] sd 0:0:0:0: Attached scsi generic sg0 type 0
649 [    4.175710] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
650 [    6.327476] udevd[363]: starting version 175
651 [    7.449753] udevd[431]: renamed network interface eth0 to eth1
652 [    7.506236] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input1
653 [    7.506246] ACPI: Sleep Button [SLPB]
654 [    7.506324] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input2
655 [    7.506478] ACPI: Lid Switch [LID]
656 [    7.506546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
657 [    7.506551] ACPI: Power Button [PWRF]
658 [    7.561558] ACPI: Requesting acpi_cpufreq
659 [    7.601529] acpi device:06: registered as cooling_device0
660 [    7.601645] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
661 [    7.601655] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
662 [    7.717895] cfg80211: Calling CRDA to update world regulatory domain
663 [    7.728572] input: PC Speaker as /devices/platform/pcspkr/input/input5
664 [    7.795434] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
665 [    7.838396] ACPI: AC Adapter [AC] (on-line)
666 [    7.839051] ACPI: Battery Slot [BAT0] (battery absent)
667 [    7.839197] ACPI: Battery Slot [BAT1] (battery absent)
668 [    7.870947] iTCO_vendor_support: vendor-support=0
669 [    7.927577] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
670 [    7.927672] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0560)
671 [    7.927753] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
672 [    7.942298] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 18, expected 21)
673 [    7.942336] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
674 [    7.942549] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
675 [    8.121681] [drm] Initialized drm 1.1.0 20060810
676 [    8.194581] i915 0000:00:02.0: setting latency timer to 64
677 [    8.204824] i915 0000:00:02.0: irq 46 for MSI/MSI-X
678 [    8.204830] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
679 [    8.204832] [drm] Driver supports precise vblank timestamp query.
680 [    8.204900] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
681 [    8.225374] Bluetooth: Core ver 2.16
682 [    8.225406] NET: Registered protocol family 31
683 [    8.225409] Bluetooth: HCI device and connection manager initialized
684 [    8.225413] Bluetooth: HCI socket layer initialized
685 [    8.225416] Bluetooth: L2CAP socket layer initialized
686 [    8.225423] Bluetooth: SCO socket layer initialized
687 [    8.272103] Bluetooth: Generic Bluetooth USB driver ver 0.6
688 [    8.272393] usbcore: registered new interface driver btusb
689 [    8.370457] Non-volatile memory driver v1.3
690 [    8.403312] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
691 [    8.403314] Copyright(c) 2003-2011 Intel Corporation
692 [    8.403436] iwlwifi 0000:04:00.0: setting latency timer to 64
693 [    8.403480] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000
694 [    8.403483] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000650000
695 [    8.403486] iwlwifi 0000:04:00.0: HW Revision ID = 0x35
696 [    8.403621] iwlwifi 0000:04:00.0: irq 47 for MSI/MSI-X
697 [    8.403701] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
698 [    8.403811] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
699 [    8.414747] iwlwifi 0000:04:00.0: device EEPROM VER=0x436, CALIB=0x6
700 [    8.414750] iwlwifi 0000:04:00.0: Device SKU: 0X1f0
701 [    8.414752] iwlwifi 0000:04:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
702 [    8.414784] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
703 [    8.707899] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000
704 [    8.707916] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
705 [    8.708492] fbcon: inteldrmfb (fb0) is primary device
706 [    8.765959] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
707 [    8.891651] Console: switching to colour frame buffer device 160x50
708 [    8.895849] fb0: inteldrmfb frame buffer device
709 [    8.895851] drm: registered panic notifier
710 [    8.895882] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
711 [    8.896041] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
712 [    8.896073] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
713 [    9.000041] cfg80211: World regulatory domain updated:
714 [    9.000044] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
715 [    9.000048] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
716 [    9.000052] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
717 [    9.000055] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
718 [    9.000058] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
719 [    9.000061] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
720 [    9.021583] iwlwifi 0000:04:00.0: firmware: agent loaded iwlwifi-6000-4.ucode into memory
721 [    9.021592] iwlwifi 0000:04:00.0: loaded firmware version 9.221.4.1 build 25532
722 [    9.022060] Registered led device: phy0-led
723 [    9.266752] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
724 [    9.297177] udevd[413]: renamed network interface wlan0 to wlan1
725 [    9.696361] Linux media interface: v0.10
726 [    9.725792] Linux video capture interface: v2.00
727 [    9.737501] usbcore: registered new interface driver usbserial
728 [    9.737512] USB Serial support registered for generic
729 [    9.737566] usbcore: registered new interface driver usbserial_generic
730 [    9.737568] usbserial: USB Serial Driver core
731 [    9.756019] USB Serial support registered for Qualcomm USB modem
732 [    9.756053] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
733 [    9.756179] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
734 [    9.756202] usbcore: registered new interface driver qcserial
735 [    9.885583] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
736 [    9.887576] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
737 [    9.887741] usbcore: registered new interface driver uvcvideo
738 [    9.887745] USB Video Class driver (1.1.1)
739 [   11.943607] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
740 [   12.205549] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
741 [   12.219672] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
742 [   12.219918] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
743 [   13.143111] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
744 [   14.077068] EXT4-fs (sda6): re-mounted. Opts: (null)
745 [   14.380416] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
746 [   14.576680] loop: module loaded
747 [   15.399627] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
748 [   16.730258] RPC: Registered named UNIX socket transport module.
749 [   16.730264] RPC: Registered udp transport module.
750 [   16.730267] RPC: Registered tcp transport module.
751 [   16.730269] RPC: Registered tcp NFSv4.1 backchannel transport module.
752 [   16.780332] FS-Cache: Loaded
753 [   16.798362] IBM TrackPoint firmware: 0x0e, buttons: 3/3
754 [   16.839188] FS-Cache: Netfs 'nfs' registered for caching
755 [   16.879486] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
756 [   17.096368] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input10
757 [   19.097033] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
758 [   20.984078] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
759 [   20.984082] Bluetooth: BNEP filters: protocol multicast
760 [   20.994313] Bluetooth: RFCOMM TTY layer initialized
761 [   20.994323] Bluetooth: RFCOMM socket layer initialized
762 [   20.994328] Bluetooth: RFCOMM ver 1.11
763 [   21.447827] lp: driver loaded but no devices found
764 [   21.657521] ppdev: user-space parallel port driver
765 [   23.750801] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
766 [   23.806598] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
767 [   23.807363] ADDRCONF(NETDEV_UP): eth1: link is not ready
768 [   23.827847] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
769 [   23.828025] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
770 [   24.070515] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
771 [   24.070710] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
772 [   24.204513] ADDRCONF(NETDEV_UP): wlan1: link is not ready
773 [   25.368280] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
774 [   25.368288] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
775 [   25.368951] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
776 [   36.009397] eth1: no IPv6 routers present