lenovo/x230/4.0-6522-ge0ceac3/2014-07-28T23:24:28Z
[board-status.git] / lenovo / x201 / 4.0-5189-gea8d460 / 2013-12-30T06:20:38Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Linux version 3.8.0-21-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 (Ubuntu 3.8.0-21.32-generic 3.8.8)
4 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro
5 [    0.000000] KERNEL supported cpus:
6 [    0.000000]   Intel GenuineIntel
7 [    0.000000]   AMD AuthenticAMD
8 [    0.000000]   Centaur CentaurHauls
9 [    0.000000] e820: BIOS-provided physical RAM map:
10 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
11 [    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
12 [    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
13 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6bffff] usable
14 [    0.000000] BIOS-e820: [mem 0x00000000bf6c0000-0x00000000bf7fffff] type 16
15 [    0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
16 [    0.000000] BIOS-e820: [mem 0x00000000c1c00000-0x00000000c3ffffff] reserved
17 [    0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000efffffff] reserved
18 [    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fedfffff] reserved
19 [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000133ffffff] usable
20 [    0.000000] NX (Execute Disable) protection: active
21 [    0.000000] SMBIOS 2.7 present.
22 [    0.000000] DMI: LENOVO 3626EN1, BIOS 4.0-5189-gea8d460 01/03/2014
23 [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
24 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
25 [    0.000000] No AGP bridge found
26 [    0.000000] e820: last_pfn = 0x134000 max_arch_pfn = 0x400000000
27 [    0.000000] MTRR default type: write-back
28 [    0.000000] MTRR fixed ranges enabled:
29 [    0.000000]   00000-9FFFF write-back
30 [    0.000000]   A0000-BFFFF uncachable
31 [    0.000000]   C0000-FFFFF write-back
32 [    0.000000] MTRR variable ranges enabled:
33 [    0.000000]   0 base 0BF800000 mask FFF800000 uncachable
34 [    0.000000]   1 base 0C0000000 mask FC0000000 uncachable
35 [    0.000000]   2 disabled
36 [    0.000000]   3 disabled
37 [    0.000000]   4 disabled
38 [    0.000000]   5 disabled
39 [    0.000000]   6 disabled
40 [    0.000000]   7 disabled
41 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
42 [    0.000000] e820: last_pfn = 0xbf6c0 max_arch_pfn = 0x400000000
43 [    0.000000] found SMP MP-table at [mem 0x000f0400-0x000f040f] mapped at [ffff8800000f0400]
44 [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
45 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
46 [    0.000000] init_memory_mapping: [mem 0x00000000-0xbf6bffff]
47 [    0.000000]  [mem 0x00000000-0xbf5fffff] page 2M
48 [    0.000000]  [mem 0xbf600000-0xbf6bffff] page 4k
49 [    0.000000] kernel direct mapping tables up to 0xbf6bffff @ [mem 0x1fffb000-0x1fffffff]
50 [    0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
51 [    0.000000]  [mem 0x100000000-0x133ffffff] page 2M
52 [    0.000000] kernel direct mapping tables up to 0x133ffffff @ [mem 0xbf6be000-0xbf6bffff]
53 [    0.000000] RAMDISK: [mem 0x35fea000-0x36fecfff]
54 [    0.000000] ACPI: RSDP 00000000000f0800 00024 (v02 CORE  )
55 [    0.000000] ACPI: XSDT 00000000bf6d2ee0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
56 [    0.000000] ACPI: HPET 00000000bf6d3010 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
57 [    0.000000] ACPI: APIC 00000000bf6d3050 00084 (v01 CORE   COREBOOT 00000000 CORE 00000000)
58 [    0.000000] ACPI: MCFG 00000000bf6d30e0 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
59 [    0.000000] ACPI: FACP 00000000bf6d6c20 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000000)
60 [    0.000000] ACPI: DSDT 00000000bf6d3160 039C0 (v03 COREv4 COREBOOT 20130325 INTL 20130626)
61 [    0.000000] ACPI: FACS 00000000bf6d3120 00040
62 [    0.000000] ACPI: SSDT 00000000bf6d6d20 00DCC (v02 CORE   COREBOOT 0000002A CORE 0000002A)
63 [    0.000000] ACPI: Local APIC address 0xfee00000
64 [    0.000000] No NUMA configuration found
65 [    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000133ffffff]
66 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x133ffffff]
67 [    0.000000]   NODE_DATA [mem 0x133ffb000-0x133ffffff]
68 [    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88012f800000-ffff8801335fffff] on node 0
69 [    0.000000] Zone ranges:
70 [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
71 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
72 [    0.000000]   Normal   [mem 0x100000000-0x133ffffff]
73 [    0.000000] Movable zone start for each node
74 [    0.000000] Early memory node ranges
75 [    0.000000]   node   0: [mem 0x00010000-0x0009ffff]
76 [    0.000000]   node   0: [mem 0x00100000-0xbf6bffff]
77 [    0.000000]   node   0: [mem 0x100000000-0x133ffffff]
78 [    0.000000] On node 0 totalpages: 996944
79 [    0.000000]   DMA zone: 64 pages used for memmap
80 [    0.000000]   DMA zone: 7 pages reserved
81 [    0.000000]   DMA zone: 3913 pages, LIFO batch:0
82 [    0.000000]   DMA32 zone: 12187 pages used for memmap
83 [    0.000000]   DMA32 zone: 767781 pages, LIFO batch:31
84 [    0.000000]   Normal zone: 3328 pages used for memmap
85 [    0.000000]   Normal zone: 209664 pages, LIFO batch:31
86 [    0.000000] ACPI: PM-Timer IO Port: 0x508
87 [    0.000000] ACPI: Local APIC address 0xfee00000
88 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
89 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
90 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
91 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
92 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
93 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
94 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
95 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
96 [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
97 [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
98 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
99 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
100 [    0.000000] ACPI: IRQ0 used by override.
101 [    0.000000] ACPI: IRQ2 used by override.
102 [    0.000000] ACPI: IRQ9 used by override.
103 [    0.000000] Using ACPI (MADT) for SMP configuration information
104 [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
105 [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
106 [    0.000000] nr_irqs_gsi: 40
107 [    0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
108 [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
109 [    0.000000] PM: Registered nosave memory: 00000000bf6c0000 - 00000000bf800000
110 [    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
111 [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c1c00000
112 [    0.000000] PM: Registered nosave memory: 00000000c1c00000 - 00000000c4000000
113 [    0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000d0000000
114 [    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
115 [    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed00000
116 [    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
117 [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 0000000100000000
118 [    0.000000] e820: [mem 0xf0000000-0xfecfffff] available for PCI devices
119 [    0.000000] Booting paravirtualized kernel on bare hardware
120 [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
121 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880133c00000 s85056 r8192 d21440 u524288
122 [    0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
123 [    0.000000] pcpu-alloc: [0] 0 1 2 3 
124 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 981358
125 [    0.000000] Policy zone: Normal
126 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-21-generic root=UUID=03d4f0d9-2880-48e2-a0fc-0591c740aa45 ro
127 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
128 [    0.000000] __ex_table already sorted, skipping sort
129 [    0.000000] Checking aperture...
130 [    0.000000] No AGP bridge found
131 [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
132 [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
133 [    0.000000] Memory: 3825556k/5046272k available (7006k kernel code, 1058496k absent, 162220k reserved, 6238k data, 992k init)
134 [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
135 [    0.000000] Hierarchical RCU implementation.
136 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
137 [    0.000000]  RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
138 [    0.000000] NR_IRQS:16640 nr_irqs:712 16
139 [    0.000000] Console: colour VGA+ 80x25
140 [    0.000000] console [tty0] enabled
141 [    0.000000] allocated 16252928 bytes of page_cgroup
142 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
143 [    0.000000] hpet clockevent registered
144 [    0.000000] tsc: Fast TSC calibration using PIT
145 [    0.004000] tsc: Detected 2527.170 MHz processor
146 [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.34 BogoMIPS (lpj=10108680)
147 [    0.000126] pid_max: default: 32768 minimum: 301
148 [    0.000208] Security Framework initialized
149 [    0.000278] AppArmor: AppArmor initialized
150 [    0.000335] Yama: becoming mindful.
151 [    0.000689] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
152 [    0.002126] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
153 [    0.002787] Mount-cache hash table entries: 256
154 [    0.003026] Initializing cgroup subsys cpuacct
155 [    0.003087] Initializing cgroup subsys memory
156 [    0.003153] Initializing cgroup subsys devices
157 [    0.003212] Initializing cgroup subsys freezer
158 [    0.003271] Initializing cgroup subsys blkio
159 [    0.003330] Initializing cgroup subsys perf_event
160 [    0.003415] Initializing cgroup subsys hugetlb
161 [    0.003498] CPU: Physical Processor ID: 0
162 [    0.003554] CPU: Processor Core ID: 0
163 [    0.003615] mce: CPU supports 9 MCE banks
164 [    0.003683] CPU0: Thermal monitoring enabled (TM1)
165 [    0.003748] process: using mwait in idle threads
166 [    0.003811] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
167 [    0.003811] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
168 [    0.003811] tlb_flushall_shift: 6
169 [    0.004085] Freeing SMP alternatives: 24k freed
170 [    0.006269] ACPI: Core revision 20121018
171 [    0.079222] ftrace: allocating 26690 entries in 105 pages
172 [    0.093054] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
173 [    0.132785] smpboot: CPU0: Intel(R) Core(TM) i5 CPU       M 540  @ 2.53GHz (fam: 06, model: 25, stepping: 05)
174 [    0.239250] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
175 [    0.239429] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
176 [    0.239492] ... version:                3
177 [    0.239549] ... bit width:              48
178 [    0.239604] ... generic registers:      4
179 [    0.239662] ... value mask:             0000ffffffffffff
180 [    0.239723] ... max period:             000000007fffffff
181 [    0.239781] ... fixed-purpose events:   3
182 [    0.239837] ... event mask:             000000070000000f
183 [    0.254132] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
184 [    0.240864] smpboot: Booting Node   0, Processors  #1 #2 #3 OK
185 [    0.280817] Brought up 4 CPUs
186 [    0.280871] smpboot: Total of 4 processors activated (20217.36 BogoMIPS)
187 [    0.283362] devtmpfs: initialized
188 [    0.284385] EVM: security.selinux
189 [    0.284439] EVM: security.SMACK64
190 [    0.284492] EVM: security.capability
191 [    0.285458] regulator-dummy: no parameters
192 [    0.285560] NET: Registered protocol family 16
193 [    0.285739] ACPI: bus type pci registered
194 [    0.285844] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
195 [    0.285944] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
196 [    0.300648] PCI: Using configuration type 1 for base access
197 [    0.301487] bio: create slab <bio-0> at 0
198 [    0.301626] ACPI: Added _OSI(Module Device)
199 [    0.301683] ACPI: Added _OSI(Processor Device)
200 [    0.301740] ACPI: Added _OSI(3.0 _SCP Extensions)
201 [    0.301800] ACPI: Added _OSI(Processor Aggregator Device)
202 [    0.302685] ACPI: EC: Look up EC in DSDT
203 [    0.304984] ACPI: Interpreter enabled
204 [    0.305043] ACPI: (supports S0 S3 S4 S5)
205 [    0.305195] ACPI: Using IOAPIC for interrupt routing
206 [    0.308687] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
207 [    0.309076] ACPI: ACPI Dock Station Driver: 1 docks/bays found
208 [    0.309141] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
209 [    0.309310] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
210 [    0.309375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
211 [    0.309615] PCI host bridge to bus 0000:00
212 [    0.309675] pci_bus 0000:00: root bus resource [bus 00-ff]
213 [    0.309738] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
214 [    0.309799] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
215 [    0.309861] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
216 [    0.309926] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
217 [    0.309992] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
218 [    0.310059] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
219 [    0.310122] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
220 [    0.310775] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
221 [    0.310838] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
222 [    0.310903] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
223 [    0.310968] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
224 [    0.311033] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
225 [    0.311100] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
226 [    0.311163] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
227 [    0.311229] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
228 [    0.311295] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
229 [    0.311361] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xfebfffff]
230 [    0.311424] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
231 [    0.311499] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
232 [    0.311516] DMAR: Disabling batched IOTLB flush on Ironlake
233 [    0.311595] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
234 [    0.311627] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
235 [    0.311640] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
236 [    0.311650] pci 0000:00:02.0: reg 10: [mem 0xcf800000-0xcfbfffff 64bit]
237 [    0.311657] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
238 [    0.311661] pci 0000:00:02.0: reg 20: [io  0x1040-0x1047]
239 [    0.311721] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
240 [    0.311748] pci 0000:00:16.0: reg 10: [mem 0xcfd27100-0xcfd2710f 64bit]
241 [    0.311839] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
242 [    0.311871] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
243 [    0.311887] pci 0000:00:19.0: reg 10: [mem 0xcfd00000-0xcfd1ffff]
244 [    0.311895] pci 0000:00:19.0: reg 14: [mem 0xcfd24000-0xcfd24fff]
245 [    0.311903] pci 0000:00:19.0: reg 18: [io  0x1000-0x101f]
246 [    0.311961] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
247 [    0.311984] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
248 [    0.312005] pci 0000:00:1a.0: reg 10: [mem 0xcfd26800-0xcfd26bff]
249 [    0.312093] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
250 [    0.312119] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
251 [    0.312133] pci 0000:00:1b.0: reg 10: [mem 0xcfd20000-0xcfd23fff 64bit]
252 [    0.312196] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
253 [    0.312217] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
254 [    0.312286] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
255 [    0.312313] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
256 [    0.312377] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
257 [    0.312398] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
258 [    0.312462] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
259 [    0.312492] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
260 [    0.312511] pci 0000:00:1d.0: reg 10: [mem 0xcfd26c00-0xcfd26fff]
261 [    0.312593] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
262 [    0.312613] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
263 [    0.312672] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
264 [    0.312793] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
265 [    0.312815] pci 0000:00:1f.2: reg 10: [io  0x1048-0x104f]
266 [    0.312825] pci 0000:00:1f.2: reg 14: [io  0x1058-0x105b]
267 [    0.312835] pci 0000:00:1f.2: reg 18: [io  0x1050-0x1057]
268 [    0.312844] pci 0000:00:1f.2: reg 1c: [io  0x105c-0x105f]
269 [    0.312854] pci 0000:00:1f.2: reg 20: [io  0x1020-0x103f]
270 [    0.312864] pci 0000:00:1f.2: reg 24: [mem 0xcfd26000-0xcfd267ff]
271 [    0.312922] pci 0000:00:1f.2: PME# supported from D3hot
272 [    0.312944] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
273 [    0.312957] pci 0000:00:1f.3: reg 10: [mem 0xcfd27000-0xcfd270ff 64bit]
274 [    0.312976] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
275 [    0.313012] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
276 [    0.313033] pci 0000:00:1f.6: reg 10: [mem 0xcfd25000-0xcfd25fff 64bit]
277 [    0.313127] pci 0000:00:01.0: PCI bridge to [bus 01]
278 [    0.313225] pci 0000:00:1c.0: PCI bridge to [bus 02]
279 [    0.313325] pci 0000:00:1c.3: PCI bridge to [bus 03]
280 [    0.313550] pci 0000:04:00.0: [8086:4238] type 00 class 0x028000
281 [    0.313679] pci 0000:04:00.0: reg 10: [mem 0xcfc00000-0xcfc01fff 64bit]
282 [    0.314320] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
283 [    0.314537] pci 0000:00:1c.4: PCI bridge to [bus 04]
284 [    0.314601] pci 0000:00:1c.4:   bridge window [mem 0xcfc00000-0xcfcfffff]
285 [    0.314659] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
286 [    0.314730] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
287 [    0.314732] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
288 [    0.314734] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
289 [    0.314736] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
290 [    0.314737] pci 0000:00:1e.0:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
291 [    0.314739] pci 0000:00:1e.0:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
292 [    0.314741] pci 0000:00:1e.0:   bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
293 [    0.314743] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
294 [    0.314744] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
295 [    0.314746] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
296 [    0.314748] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
297 [    0.314749] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
298 [    0.314751] pci 0000:00:1e.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
299 [    0.314753] pci 0000:00:1e.0:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
300 [    0.314755] pci 0000:00:1e.0:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
301 [    0.314756] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
302 [    0.314758] pci 0000:00:1e.0:   bridge window [mem 0xc4000000-0xfebfffff] (subtractive decode)
303 [    0.314760] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
304 [    0.314792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
305 [    0.314960] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
306 [    0.315139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
307 [    0.315325]  pci0000:00: Requesting ACPI _OSC control (0x1d)
308 [    0.315413]  pci0000:00: ACPI _OSC control (0x1d) granted
309 [    0.316016] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
310 [    0.316102] PCI host bridge to bus 0000:ff
311 [    0.316161] pci_bus 0000:ff: root bus resource [bus ff]
312 [    0.316223] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
313 [    0.316241] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
314 [    0.316261] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
315 [    0.316278] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
316 [    0.316294] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
317 [    0.316311] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
318 [    0.316340]  pci0000:ff: ACPI _OSC support notification failed, disabling PCIe ASPM
319 [    0.316433]  pci0000:ff: Unable to request _OSC control (_OSC support mask: 0x08)
320 [    0.316654] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
321 [    0.317043] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
322 [    0.317377] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
323 [    0.317759] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
324 [    0.318095] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
325 [    0.318474] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
326 [    0.318810] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
327 [    0.319189] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
328 [    0.319580] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
329 [    0.319674] vgaarb: loaded
330 [    0.319726] vgaarb: bridge control possible 0000:00:02.0
331 [    0.319942] SCSI subsystem initialized
332 [    0.320000] ACPI: bus type scsi registered
333 [    0.320092] libata version 3.00 loaded.
334 [    0.320117] ACPI: bus type usb registered
335 [    0.320189] usbcore: registered new interface driver usbfs
336 [    0.320256] usbcore: registered new interface driver hub
337 [    0.320334] usbcore: registered new device driver usb
338 [    0.320473] PCI: Using ACPI for IRQ routing
339 [    0.329156] PCI: pci_cache_line_size set to 64 bytes
340 [    0.329258] e820: reserve RAM buffer [mem 0xbf6c0000-0xbfffffff]
341 [    0.329340] NetLabel: Initializing
342 [    0.329397] NetLabel:  domain hash size = 128
343 [    0.329454] NetLabel:  protocols = UNLABELED CIPSOv4
344 [    0.329522] NetLabel:  unlabeled traffic allowed by default
345 [    0.329626] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
346 [    0.329869] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
347 [    0.331940] Switching to clocksource hpet
348 [    0.337064] AppArmor: AppArmor Filesystem Enabled
349 [    0.337158] pnp: PnP ACPI init
350 [    0.337227] ACPI: bus type pnp registered
351 [    0.337379] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
352 [    0.337447] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
353 [    0.337513] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
354 [    0.337578] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
355 [    0.337644] system 00:00: [mem 0xe0000000-0xe3ffffff] has been reserved
356 [    0.337710] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
357 [    0.337775] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
358 [    0.337841] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
359 [    0.337904] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved
360 [    0.337968] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved
361 [    0.338037] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
362 [    0.338438] pnp 00:01: [dma 4]
363 [    0.338465] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
364 [    0.338489] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
365 [    0.338581] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
366 [    0.338649] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
367 [    0.338685] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
368 [    0.338717] system 00:05: [io  0x0500-0x057f] has been reserved
369 [    0.338780] system 00:05: [io  0x0480-0x04bf] has been reserved
370 [    0.338845] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
371 [    0.338865] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
372 [    0.338901] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
373 [    0.338930] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
374 [    0.339051] pnp: PnP ACPI: found 9 devices
375 [    0.339109] ACPI: ACPI bus type pnp unregistered
376 [    0.345150] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
377 [    0.345154] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
378 [    0.345156] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
379 [    0.345165] pci 0000:00:1c.3: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
380 [    0.345167] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
381 [    0.345169] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
382 [    0.345177] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
383 [    0.345180] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
384 [    0.345194] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
385 [    0.345197] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
386 [    0.345199] pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
387 [    0.345201] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
388 [    0.345203] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
389 [    0.345205] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
390 [    0.345206] pci 0000:00:1c.3: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
391 [    0.345208] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
392 [    0.345214] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc4000000-0xc41fffff]
393 [    0.345285] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
394 [    0.345379] pci 0000:00:1c.3: BAR 14: assigned [mem 0xc4400000-0xc45fffff]
395 [    0.345448] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc4600000-0xc47fffff 64bit pref]
396 [    0.345541] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4800000-0xc49fffff 64bit pref]
397 [    0.345632] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
398 [    0.345697] pci 0000:00:1c.3: BAR 13: assigned [io  0x3000-0x3fff]
399 [    0.345759] pci 0000:00:1c.4: BAR 13: assigned [io  0x4000-0x4fff]
400 [    0.345825] pci 0000:00:01.0: PCI bridge to [bus 01]
401 [    0.345890] pci 0000:00:1c.0: PCI bridge to [bus 02]
402 [    0.345949] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
403 [    0.346016] pci 0000:00:1c.0:   bridge window [mem 0xc4000000-0xc41fffff]
404 [    0.346082] pci 0000:00:1c.0:   bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
405 [    0.346178] pci 0000:00:1c.3: PCI bridge to [bus 03]
406 [    0.346238] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
407 [    0.346305] pci 0000:00:1c.3:   bridge window [mem 0xc4400000-0xc45fffff]
408 [    0.346373] pci 0000:00:1c.3:   bridge window [mem 0xc4600000-0xc47fffff 64bit pref]
409 [    0.346466] pci 0000:00:1c.4: PCI bridge to [bus 04]
410 [    0.346525] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
411 [    0.346588] pci 0000:00:1c.4:   bridge window [mem 0xcfc00000-0xcfcfffff]
412 [    0.346656] pci 0000:00:1c.4:   bridge window [mem 0xc4800000-0xc49fffff 64bit pref]
413 [    0.346750] pci 0000:00:1e.0: PCI bridge to [bus 05]
414 [    0.346834] pci 0000:00:1c.0: enabling device (0000 -> 0003)
415 [    0.346905] pci 0000:00:1c.3: enabling device (0000 -> 0003)
416 [    0.346973] pci 0000:00:1c.4: enabling device (0006 -> 0007)
417 [    0.347041] pci 0000:00:1e.0: setting latency timer to 64
418 [    0.347046] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
419 [    0.347047] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
420 [    0.347049] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
421 [    0.347051] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
422 [    0.347052] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
423 [    0.347054] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
424 [    0.347056] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
425 [    0.347057] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
426 [    0.347059] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
427 [    0.347061] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
428 [    0.347062] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
429 [    0.347064] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
430 [    0.347066] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
431 [    0.347067] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
432 [    0.347069] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
433 [    0.347071] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
434 [    0.347072] pci_bus 0000:00: resource 20 [mem 0xc4000000-0xfebfffff]
435 [    0.347074] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
436 [    0.347076] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
437 [    0.347078] pci_bus 0000:02: resource 1 [mem 0xc4000000-0xc41fffff]
438 [    0.347080] pci_bus 0000:02: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
439 [    0.347081] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
440 [    0.347083] pci_bus 0000:03: resource 1 [mem 0xc4400000-0xc45fffff]
441 [    0.347085] pci_bus 0000:03: resource 2 [mem 0xc4600000-0xc47fffff 64bit pref]
442 [    0.347087] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
443 [    0.347088] pci_bus 0000:04: resource 1 [mem 0xcfc00000-0xcfcfffff]
444 [    0.347090] pci_bus 0000:04: resource 2 [mem 0xc4800000-0xc49fffff 64bit pref]
445 [    0.347092] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
446 [    0.347094] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
447 [    0.347096] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
448 [    0.347097] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000c3fff]
449 [    0.347099] pci_bus 0000:05: resource 8 [mem 0x000c4000-0x000c7fff]
450 [    0.347101] pci_bus 0000:05: resource 9 [mem 0x000c8000-0x000cbfff]
451 [    0.347102] pci_bus 0000:05: resource 10 [mem 0x000cc000-0x000cffff]
452 [    0.347104] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
453 [    0.347106] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
454 [    0.347107] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
455 [    0.347109] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
456 [    0.347111] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
457 [    0.347112] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
458 [    0.347114] pci_bus 0000:05: resource 17 [mem 0x000e8000-0x000ebfff]
459 [    0.347116] pci_bus 0000:05: resource 18 [mem 0x000ec000-0x000effff]
460 [    0.347117] pci_bus 0000:05: resource 19 [mem 0x000f0000-0x000fffff]
461 [    0.347119] pci_bus 0000:05: resource 20 [mem 0xc4000000-0xfebfffff]
462 [    0.347121] pci_bus 0000:05: resource 21 [mem 0xfed40000-0xfed44fff]
463 [    0.347153] NET: Registered protocol family 2
464 [    0.347362] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
465 [    0.347625] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
466 [    0.347829] TCP: Hash tables configured (established 32768 bind 32768)
467 [    0.347921] TCP: reno registered
468 [    0.347983] UDP hash table entries: 2048 (order: 4, 65536 bytes)
469 [    0.348079] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
470 [    0.348206] NET: Registered protocol family 1
471 [    0.348277] pci 0000:00:02.0: Boot video device
472 [    0.348395] PCI: CLS 64 bytes, default 64
473 [    0.348436] Trying to unpack rootfs image as initramfs...
474 [    0.615237] Freeing initrd memory: 16396k freed
475 [    0.618897] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
476 [    0.618969] software IO TLB [mem 0xbb6be000-0xbf6be000] (64MB) mapped at [ffff8800bb6be000-ffff8800bf6bdfff]
477 [    0.619526] Initialise module verification
478 [    0.619626] audit: initializing netlink socket (disabled)
479 [    0.619696] type=2000 audit(1388713826.444:1): initialized
480 [    0.646987] HugeTLB registered 2 MB page size, pre-allocated 0 pages
481 [    0.648346] VFS: Disk quotas dquot_6.5.2
482 [    0.648439] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
483 [    0.648903] fuse init (API version 7.20)
484 [    0.649025] msgmni has been set to 7503
485 [    0.649429] Key type asymmetric registered
486 [    0.649488] Asymmetric key parser 'x509' registered
487 [    0.649576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
488 [    0.649692] io scheduler noop registered
489 [    0.649751] io scheduler deadline registered (default)
490 [    0.649815] io scheduler cfq registered
491 [    0.649981] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
492 [    0.650056] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
493 [    0.650141] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
494 [    0.650221] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
495 [    0.650290] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
496 [    0.650359] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
497 [    0.650375] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
498 [    0.650441] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
499 [    0.650455] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
500 [    0.650523] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
501 [    0.650538] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
502 [    0.650605] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
503 [    0.650672] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
504 [    0.650683] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
505 [    0.650757] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
506 [    0.650855] intel_idle: MWAIT substates: 0x1120
507 [    0.650856] intel_idle: v0.4 model 0x25
508 [    0.650857] intel_idle: lapic_timer_reliable_states 0xffffffff
509 [    0.651183] ACPI: AC Adapter [AC] (on-line)
510 [    0.651315] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0E:00/input/input0
511 [    0.651445] ACPI: Sleep Button [SLPB]
512 [    0.651565] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0D:00/input/input1
513 [    0.651777] ACPI: Lid Switch [LID]
514 [    0.651879] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
515 [    0.651973] ACPI: Power Button [PWRF]
516 [    0.652060] ACPI: Requesting acpi_cpufreq
517 [    0.656029] thermal LNXTHERM:00: registered as thermal_zone0
518 [    0.656092] ACPI: Thermal Zone [THM0] (40 C)
519 [    0.656594] thermal LNXTHERM:01: registered as thermal_zone1
520 [    0.656655] ACPI: Thermal Zone [THM1] (27 C)
521 [    0.656737] GHES: HEST is not enabled!
522 [    0.656874] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
523 [    0.658215] Linux agpgart interface v0.103
524 [    0.658349] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
525 [    0.658506] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
526 [    0.659205] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
527 [    0.659424] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
528 [    0.660770] brd: module loaded
529 [    0.661499] loop: module loaded
530 [    0.661896] libphy: Fixed MDIO Bus: probed
531 [    0.662040] tun: Universal TUN/TAP device driver, 1.6
532 [    0.662112] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
533 [    0.662224] PPP generic driver version 2.4.2
534 [    0.662326] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
535 [    0.662390] ehci-pci: EHCI PCI platform driver
536 [    0.662482] ehci-pci 0000:00:1a.0: setting latency timer to 64
537 [    0.662486] ehci-pci 0000:00:1a.0: EHCI Host Controller
538 [    0.662548] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
539 [    0.662653] ehci-pci 0000:00:1a.0: debug port 2
540 [    0.666639] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
541 [    0.666662] ehci-pci 0000:00:1a.0: irq 23, io mem 0xcfd26800
542 [    0.671425] ACPI: Battery Slot [BAT0] (battery present)
543 [    0.671604] ACPI: Battery Slot [BAT1] (battery absent)
544 [    0.675827] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
545 [    0.676513] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
546 [    0.676580] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
547 [    0.676669] usb usb1: Product: EHCI Host Controller
548 [    0.676729] usb usb1: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
549 [    0.676791] usb usb1: SerialNumber: 0000:00:1a.0
550 [    0.676936] hub 1-0:1.0: USB hub found
551 [    0.676996] hub 1-0:1.0: 6 ports detected
552 [    0.677200] ehci-pci 0000:00:1d.0: setting latency timer to 64
553 [    0.677203] ehci-pci 0000:00:1d.0: EHCI Host Controller
554 [    0.677268] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
555 [    0.677370] ehci-pci 0000:00:1d.0: debug port 2
556 [    0.681333] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
557 [    0.681346] ehci-pci 0000:00:1d.0: irq 19, io mem 0xcfd26c00
558 [    0.691822] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
559 [    0.691893] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
560 [    0.691970] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
561 [    0.692062] usb usb2: Product: EHCI Host Controller
562 [    0.692122] usb usb2: Manufacturer: Linux 3.8.0-21-generic ehci_hcd
563 [    0.692187] usb usb2: SerialNumber: 0000:00:1d.0
564 [    0.692316] hub 2-0:1.0: USB hub found
565 [    0.692380] hub 2-0:1.0: 8 ports detected
566 [    0.692590] ehci-platform: EHCI generic platform driver
567 [    0.692656] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
568 [    0.692726] uhci_hcd: USB Universal Host Controller Interface driver
569 [    0.692840] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
570 [    0.697380] serio: i8042 KBD port at 0x60,0x64 irq 1
571 [    0.697444] serio: i8042 AUX port at 0x60,0x64 irq 12
572 [    0.697600] mousedev: PS/2 mouse device common for all mice
573 [    0.697793] rtc_cmos 00:06: RTC can wake from S4
574 [    0.697959] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
575 [    0.698051] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
576 [    0.698181] device-mapper: uevent: version 1.0.3
577 [    0.698298] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
578 [    0.698443] cpuidle: using governor ladder
579 [    0.698573] cpuidle: using governor menu
580 [    0.698634] ledtrig-cpu: registered to indicate activity on CPUs
581 [    0.698699] EFI Variables Facility v0.08 2004-May-17
582 [    0.698916] ashmem: initialized
583 [    0.699084] TCP: cubic registered
584 [    0.699221] NET: Registered protocol family 10
585 [    0.699433] NET: Registered protocol family 17
586 [    0.699499] Key type dns_resolver registered
587 [    0.699858] Loading module verification certificates
588 [    0.700884] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: da639d7d39047796a6cdf66158dce65752f170ea'
589 [    0.700997] registered taskstats version 1
590 [    0.701430] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
591 [    0.703572] Key type trusted registered
592 [    0.705547] Key type encrypted registered
593 [    0.707597] rtc_cmos 00:06: setting system clock to 2014-01-03 01:50:27 UTC (1388713827)
594 [    0.708268] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
595 [    0.708333] EDD information not available.
596 [    0.709751] Freeing unused kernel memory: 992k freed
597 [    0.709978] Write protecting the kernel read-only data: 12288k
598 [    0.713079] Freeing unused kernel memory: 1176k freed
599 [    0.715983] Freeing unused kernel memory: 1080k freed
600 [    0.730408] udevd[107]: starting version 175
601 [    0.755747] Disabling lock debugging due to kernel taint
602 [    0.756597] e1000e: Intel(R) PRO/1000 Network Driver - 2.1.4-k
603 [    0.756659] e1000e: Copyright(c) 1999 - 2012 Intel Corporation.
604 [    0.756763] e1000e 0000:00:19.0: setting latency timer to 64
605 [    0.756839] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
606 [    0.756966] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
607 [    0.941249] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:6b:fa:11
608 [    0.941350] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
609 [    0.941475] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
610 [    0.941623] ahci 0000:00:1f.2: version 3.0
611 [    0.941701] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
612 [    0.941744] ahci: SSS flag set, parallel bus scan disabled
613 [    0.941839] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
614 [    0.941938] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
615 [    0.942034] ahci 0000:00:1f.2: setting latency timer to 64
616 [    0.942497] scsi0 : ahci
617 [    0.942662] scsi1 : ahci
618 [    0.942794] scsi2 : ahci
619 [    0.942966] scsi3 : ahci
620 [    0.943105] scsi4 : ahci
621 [    0.943229] scsi5 : ahci
622 [    0.943319] ata1: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26100 irq 45
623 [    0.943413] ata2: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26180 irq 45
624 [    0.943505] ata3: DUMMY
625 [    0.943556] ata4: DUMMY
626 [    0.943609] ata5: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26300 irq 45
627 [    0.943717] ata6: SATA max UDMA/133 abar m2048@0xcfd26000 port 0xcfd26380 irq 45
628 [    0.987759] usb 1-1: new high-speed USB device number 2 using ehci-pci
629 [    1.120207] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
630 [    1.120275] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
631 [    1.120636] hub 1-1:1.0: USB hub found
632 [    1.120800] hub 1-1:1.0: 6 ports detected
633 [    1.231570] usb 2-1: new high-speed USB device number 2 using ehci-pci
634 [    1.263589] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
635 [    1.264764] ata1.00: ATA-8: HGST HTS725050A7E630, GH2ZB550, max UDMA/133
636 [    1.264834] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
637 [    1.266115] ata1.00: configured for UDMA/133
638 [    1.266457] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS725050A7 GH2Z PQ: 0 ANSI: 5
639 [    1.266671] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
640 [    1.266693] sd 0:0:0:0: Attached scsi generic sg0 type 0
641 [    1.266843] sd 0:0:0:0: [sda] 4096-byte physical blocks
642 [    1.266938] sd 0:0:0:0: [sda] Write Protect is off
643 [    1.266999] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
644 [    1.267013] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
645 [    1.329997]  sda: sda1 sda2 sda3 sda4 sda5
646 [    1.330389] sd 0:0:0:0: [sda] Attached SCSI disk
647 [    1.364082] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
648 [    1.364152] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
649 [    1.364611] hub 2-1:1.0: USB hub found
650 [    1.364818] hub 2-1:1.0: 8 ports detected
651 [    1.435536] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
652 [    1.529499] usb 1-1.1: New USB device found, idVendor=0525, idProduct=127a
653 [    1.529574] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
654 [    1.529673] usb 1-1.1: Product: Ajays USB 2.0 Debug Cable
655 [    1.529736] usb 1-1.1: Manufacturer: Ajays Technology
656 [    1.529797] usb 1-1.1: SerialNumber: Ajays002
657 [    1.583413] ata2: SATA link down (SStatus 0 SControl 300)
658 [    1.599607] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
659 [    1.615389] tsc: Refined TSC clocksource calibration: 2526.999 MHz
660 [    1.615459] Switching to clocksource tsc
661 [    1.692797] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016
662 [    1.692871] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
663 [    1.692967] usb 1-1.3: Product: Biometric Coprocessor
664 [    1.693026] usb 1-1.3: Manufacturer: UPEK
665 [    1.763495] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
666 [    1.860284] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f
667 [    1.860358] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
668 [    1.860456] usb 1-1.4: Product: Broadcom Bluetooth Device
669 [    1.860516] usb 1-1.4: Manufacturer: Broadcom Corp
670 [    1.860576] usb 1-1.4: SerialNumber: 70F39547ADB1
671 [    1.903230] ata5: SATA link down (SStatus 0 SControl 300)
672 [    1.931399] usb 1-1.6: new high-speed USB device number 6 using ehci-pci
673 [    2.029109] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=4816
674 [    2.029184] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
675 [    2.029283] usb 1-1.6: Product: Integrated Camera
676 [    2.029342] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
677 [    2.099321] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
678 [    2.193250] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0
679 [    2.193341] usb 2-1.4: config 1 has no interface number 0
680 [    2.195374] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204
681 [    2.195445] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
682 [    2.195541] usb 2-1.4: Product: Qualcomm Gobi 2000
683 [    2.195602] usb 2-1.4: Manufacturer: Qualcomm Incorporated
684 [    2.223019] ata6: SATA link down (SStatus 0 SControl 300)
685 [    2.544240] EXT4-fs (sda4): INFO: recovery required on readonly filesystem
686 [    2.544310] EXT4-fs (sda4): write access will be enabled during recovery
687 [    2.956081] EXT4-fs (sda4): recovery complete
688 [    2.964209] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
689 [    8.342929] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
690 [    8.361734] udevd[363]: starting version 175
691 [    8.508875] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x3
692 [    8.510874] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
693 [    8.510884] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
694 [    8.510888] ACPI Warning: 0x00000000000004c0-0x00000000000004cf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
695 [    8.510892] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
696 [    8.510894] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
697 [    8.510899] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
698 [    8.510900] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
699 [    8.510905] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
700 [    8.510906] lpc_ich: Resource conflict(s) found affecting gpio_ich
701 [    8.512951] mei 0000:00:16.0: setting latency timer to 64
702 [    8.513020] mei 0000:00:16.0: irq 46 for MSI/MSI-X
703 [    8.513946] lp: driver loaded but no devices found
704 [    8.516348] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
705 [    8.516405] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
706 [    8.518265] [drm] Initialized drm 1.1.0 20060810
707 [    8.521030] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
708 [    8.529511] Bluetooth: Core ver 2.16
709 [    8.529535] NET: Registered protocol family 31
710 [    8.529537] Bluetooth: HCI device and connection manager initialized
711 [    8.529549] Bluetooth: HCI socket layer initialized
712 [    8.529552] Bluetooth: L2CAP socket layer initialized
713 [    8.529558] Bluetooth: SCO socket layer initialized
714 [    8.534858] cfg80211: Calling CRDA to update world regulatory domain
715 [    8.535626] usbcore: registered new interface driver btusb
716 [    8.542543] Intel(R) Wireless WiFi driver for Linux, in-tree:
717 [    8.542548] Copyright(c) 2003-2012 Intel Corporation
718 [    8.542874] iwlwifi 0000:04:00.0: irq 47 for MSI/MSI-X
719 [    8.580195] type=1400 audit(1388713835.373:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
720 [    8.580401] type=1400 audit(1388713835.373:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=536 comm="apparmor_parser"
721 [    8.580584] type=1400 audit(1388713835.373:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
722 [    8.580814] type=1400 audit(1388713835.373:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=536 comm="apparmor_parser"
723 [    8.580828] type=1400 audit(1388713835.373:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
724 [    8.581061] type=1400 audit(1388713835.373:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=536 comm="apparmor_parser"
725 [    8.590007] Non-volatile memory driver v1.3
726 [    8.608492] acpi device:06: registered as cooling_device4
727 [    8.613137] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
728 [    8.613278] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
729 [    8.635309] i915 0000:00:02.0: setting latency timer to 64
730 [    8.659930] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x3
731 [    8.661929] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x3
732 [    8.662436] i915 0000:00:02.0: irq 48 for MSI/MSI-X
733 [    8.662446] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
734 [    8.662446] [drm] Driver supports precise vblank timestamp query.
735 [    8.662517] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
736 [    8.668149] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x3
737 [    8.669640] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
738 [    8.703619] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
739 [    8.749063] fbcon: inteldrmfb (fb0) is primary device
740 [    8.791131] iwlwifi 0000:04:00.0: loaded firmware version 9.221.4.1 build 25532
741 [    8.807620] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
742 [    8.807622] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
743 [    8.807623] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
744 [    8.807624] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled
745 [    8.807624] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_P2P disabled
746 [    8.807626] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
747 [    8.807768] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
748 [    8.807956] iwlwifi 0000:04:00.0: RF_KILL bit toggled to enable radio.
749 [    8.821818] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
750 [    8.955737] cfg80211: World regulatory domain updated:
751 [    8.955738] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
752 [    8.955740] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
753 [    8.955741] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
754 [    8.955742] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
755 [    8.955742] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
756 [    8.955743] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
757 [    9.118178] usbcore: registered new interface driver usbserial
758 [    9.118191] usbcore: registered new interface driver usbserial_generic
759 [    9.118202] usbserial: USB Serial support registered for generic
760 [    9.121999] usbcore: registered new interface driver usb_debug
761 [    9.122013] usbserial: USB Serial support registered for debug
762 [    9.122136] usb_debug 1-1.1:1.0: debug converter detected
763 [    9.122554] usbcore: registered new interface driver qcserial
764 [    9.122825] usbserial: USB Serial support registered for Qualcomm USB modem
765 [    9.122864] usb 1-1.1: debug converter now attached to ttyUSB0
766 [    9.123118] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
767 [    9.123575] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
768 [    9.126724] Linux video capture interface: v2.00
769 [    9.135303] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
770 [    9.137502] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5
771 [    9.137608] usbcore: registered new interface driver uvcvideo
772 [    9.137609] USB Video Class driver (1.1.1)
773 [    9.270053] Console: switching to colour frame buffer device 160x50
774 [    9.272935] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
775 [    9.272937] i915 0000:00:02.0: registered panic notifier
776 [    9.272993] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
777 [    9.273123] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
778 [    9.526670] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 615624
779 [    9.526682] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
780 [    9.576923] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
781 [    9.906533] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
782 [   10.012682] init: failsafe main process (885) killed by TERM signal
783 [   10.132373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
784 [   10.132378] Bluetooth: BNEP filters: protocol multicast
785 [   10.132391] Bluetooth: BNEP socket layer initialized
786 [   10.133407] Bluetooth: RFCOMM TTY layer initialized
787 [   10.133421] Bluetooth: RFCOMM socket layer initialized
788 [   10.133423] Bluetooth: RFCOMM ver 1.11
789 [   10.201301] type=1400 audit(1388713836.993:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=963 comm="apparmor_parser"
790 [   10.201345] type=1400 audit(1388713836.993:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=960 comm="apparmor_parser"
791 [   10.201702] type=1400 audit(1388713836.993:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=960 comm="apparmor_parser"
792 [   10.201718] type=1400 audit(1388713836.993:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=961 comm="apparmor_parser"
793 [   10.243611] init: avahi-cups-reload main process (985) terminated with status 1
794 [   10.261381] ppdev: user-space parallel port driver
795 [   10.731767] init: alsa-restore main process (1028) terminated with status 19
796 [   11.228236] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
797 [   11.330074] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
798 [   11.330189] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
799 [   11.330684] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
800 [   11.332550] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
801 [   11.332748] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
802 [   11.697365] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S
803 [   11.697563] iwlwifi 0000:04:00.0: Radio type=0x0-0x3-0x1
804 [   11.941818] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
805 [   11.942247] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
806 [   13.312073] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
807 [   13.716712] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
808 [   14.120438] hda-intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x000f0004
809 [   14.128157] hda_codec: CX20585: BIOS auto-probing.
810 [   14.137603] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
811 [   14.137693] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
812 [   14.137764] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
813 [   14.137834] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
814 [   14.137905] input: HDA Intel MID Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
815 [   14.137976] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
816 [   14.138043] input: HDA Intel MID Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
817 [   14.138118] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
818 [   14.338756] init: plymouth-stop pre-start process (1721) terminated with status 1
819 [   17.409473] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
820 [   17.673563] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input15
821 [   18.469574] wlan1: authenticate with 00:24:37:96:06:b0
822 [   18.484705] wlan1: send auth to 00:24:37:96:06:b0 (try 1/3)
823 [   18.486947] wlan1: authenticated
824 [   18.487120] iwlwifi 0000:04:00.0 wlan1: disabling HT as WMM/QoS is not supported by the AP
825 [   18.487123] iwlwifi 0000:04:00.0 wlan1: disabling VHT as WMM/QoS is not supported by the AP
826 [   18.489995] wlan1: associate with 00:24:37:96:06:b0 (try 1/3)
827 [   18.493815] wlan1: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=39)
828 [   18.499124] wlan1: associated
829 [   18.499161] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready