google/parrot/Google_Parrot.2685.54.0
[board-status.git] / google / parrot / 4.0-5001-g7f68dfd-dirty / 2013-12-07T19:45:48Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Initializing cgroup subsys cpuacct
4 [    0.000000] Linux version 3.11.9-300.fc20.x86_64 (mockbuild@bkernel02) (gcc version 4.8.2 20131017 (Red Hat 4.8.2-1) (GCC) ) #1 SMP Wed Nov 20 22:23:25 UTC 2013
5 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.11.9-300.fc20.x86_64 root=UUID=31a84af4-6d59-4abf-b6bd-dce76d787c51 ro rd.md=0 rd.lvm=0 rd.dm=0 rd.luks=0 vconsole.font=latarcyrheb-sun16 vconsole.keymap=uk rhgb quiet resume=/dev/sda1 resume_offset=73728 nopat
6 [    0.000000] e820: BIOS-provided physical RAM map:
7 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8 [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9 [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11 [    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12 [    0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13 [    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14 [    0.000000] BIOS-e820: [mem 0x0000000040200000-0x000000007bebffff] usable
15 [    0.000000] BIOS-e820: [mem 0x000000007bec0000-0x000000007e9fffff] reserved
16 [    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
17 [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
18 [    0.000000] PAT support disabled.
19 [    0.000000] NX (Execute Disable) protection: active
20 [    0.000000] SMBIOS 2.7 present.
21 [    0.000000] DMI: Google Parrot, BIOS 4.0-5001-g7f68dfd 12/07/2013
22 [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24 [    0.000000] No AGP bridge found
25 [    0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
26 [    0.000000] MTRR default type: uncachable
27 [    0.000000] MTRR fixed ranges enabled:
28 [    0.000000]   00000-9FFFF write-back
29 [    0.000000]   A0000-BFFFF uncachable
30 [    0.000000]   C0000-FFFFF write-back
31 [    0.000000] MTRR variable ranges enabled:
32 [    0.000000]   0 base 000000000 mask FC0000000 write-back
33 [    0.000000]   1 base 040000000 mask FE0000000 write-back
34 [    0.000000]   2 base 060000000 mask FF0000000 write-back
35 [    0.000000]   3 base 070000000 mask FF8000000 write-back
36 [    0.000000]   4 base 078000000 mask FFC000000 write-back
37 [    0.000000]   5 base 0D0000000 mask FF0000000 write-combining
38 [    0.000000]   6 base 0FF800000 mask FFF800000 uncachable
39 [    0.000000]   7 base 100000000 mask F00000000 write-back
40 [    0.000000]   8 disabled
41 [    0.000000]   9 disabled
42 [    0.000000] e820: last_pfn = 0x7bec0 max_arch_pfn = 0x400000000
43 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
44 [    0.000000] reserving inaccessible SNB gfx pages
45 [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
46 [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
47 [    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
48 [    0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
49 [    0.000000] BRK [0x01fe9000, 0x01fe9fff] PGTABLE
50 [    0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
51 [    0.000000]  [mem 0x100400000-0x1005fffff] page 2M
52 [    0.000000] BRK [0x01fea000, 0x01feafff] PGTABLE
53 [    0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
54 [    0.000000]  [mem 0x100000000-0x1003fffff] page 2M
55 [    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
56 [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
57 [    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
58 [    0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
59 [    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
60 [    0.000000] init_memory_mapping: [mem 0x40200000-0x7bebffff]
61 [    0.000000]  [mem 0x40200000-0x7bdfffff] page 2M
62 [    0.000000]  [mem 0x7be00000-0x7bebffff] page 4k
63 [    0.000000] BRK [0x01feb000, 0x01febfff] PGTABLE
64 [    0.000000] BRK [0x01fec000, 0x01fecfff] PGTABLE
65 [    0.000000] RAMDISK: [mem 0x3707a000-0x37834fff]
66 [    0.000000] ACPI: RSDP 00000000000fdbc0 00024 (v02 CORE  )
67 [    0.000000] ACPI: XSDT 000000007bed12e0 0004C (v01 CORE   COREBOOT 00000000 CORE 00000000)
68 [    0.000000] ACPI: FACP 000000007bed46f0 000F4 (v03 CORE   COREBOOT 00000000 CORE 00000001)
69 [    0.000000] ACPI: DSDT 000000007bed1450 03293 (v02 COREv4 COREBOOT 20110725 INTL 20130626)
70 [    0.000000] ACPI: FACS 000000007bed1410 00040
71 [    0.000000] ACPI: HPET 000000007bed47f0 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
72 [    0.000000] ACPI: APIC 000000007bed4830 0005C (v01 CORE   COREBOOT 00000000 CORE 00000000)
73 [    0.000000] ACPI: MCFG 000000007bed4890 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
74 [    0.000000] ACPI: SSDT 000000007bed5790 00818 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
75 [    0.000000] ACPI: Local APIC address 0xfee00000
76 [    0.000000] No NUMA configuration found
77 [    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
78 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
79 [    0.000000]   NODE_DATA [mem 0x1005ec000-0x1005fffff]
80 [    0.000000]  [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880079800000-ffff88007b9fffff] on node 0
81 [    0.000000] Zone ranges:
82 [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
83 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
84 [    0.000000]   Normal   [mem 0x100000000-0x1005fffff]
85 [    0.000000] Movable zone start for each node
86 [    0.000000] Early memory node ranges
87 [    0.000000]   node   0: [mem 0x00001000-0x0009efff]
88 [    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
89 [    0.000000]   node   0: [mem 0x20200000-0x3fffffff]
90 [    0.000000]   node   0: [mem 0x40200000-0x7bebffff]
91 [    0.000000]   node   0: [mem 0x100000000-0x1005fffff]
92 [    0.000000] On node 0 totalpages: 507998
93 [    0.000000]   DMA zone: 64 pages used for memmap
94 [    0.000000]   DMA zone: 158 pages reserved
95 [    0.000000]   DMA zone: 3998 pages, LIFO batch:0
96 [    0.000000]   DMA32 zone: 7851 pages used for memmap
97 [    0.000000]   DMA32 zone: 502464 pages, LIFO batch:31
98 [    0.000000]   Normal zone: 24 pages used for memmap
99 [    0.000000]   Normal zone: 1536 pages, LIFO batch:0
100 [    0.000000] ACPI: PM-Timer IO Port: 0x508
101 [    0.000000] ACPI: Local APIC address 0xfee00000
102 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
103 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
104 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
105 [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
106 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
107 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
108 [    0.000000] ACPI: IRQ0 used by override.
109 [    0.000000] ACPI: IRQ2 used by override.
110 [    0.000000] ACPI: IRQ9 used by override.
111 [    0.000000] Using ACPI (MADT) for SMP configuration information
112 [    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
113 [    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
114 [    0.000000] nr_irqs_gsi: 40
115 [    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
116 [    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
117 [    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
118 [    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
119 [    0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
120 [    0.000000] PM: Registered nosave memory: [mem 0x7bec0000-0x7e9fffff]
121 [    0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xefffffff]
122 [    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
123 [    0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
124 [    0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
125 [    0.000000] Booting paravirtualized kernel on bare hardware
126 [    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
127 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880100200000 s85568 r8192 d20928 u1048576
128 [    0.000000] pcpu-alloc: s85568 r8192 d20928 u1048576 alloc=1*2097152
129 [    0.000000] pcpu-alloc: [0] 0 1 
130 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 499901
131 [    0.000000] Policy zone: Normal
132 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.9-300.fc20.x86_64 root=UUID=31a84af4-6d59-4abf-b6bd-dce76d787c51 ro rd.md=0 rd.lvm=0 rd.dm=0 rd.luks=0 vconsole.font=latarcyrheb-sun16 vconsole.keymap=uk rhgb quiet resume=/dev/sda1 resume_offset=73728 nopat
133 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
134 [    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
135 [    0.000000] Checking aperture...
136 [    0.000000] No AGP bridge found
137 [    0.000000] Memory: 1905904K/2031992K available (6493K kernel code, 990K rwdata, 2864K rodata, 1424K init, 1544K bss, 126088K reserved)
138 [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
139 [    0.000000] Hierarchical RCU implementation.
140 [    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
141 [    0.000000] NR_IRQS:8448 nr_irqs:512 16
142 [    0.000000] Console: colour VGA+ 80x25
143 [    0.000000] console [tty0] enabled
144 [    0.000000] allocated 8912896 bytes of page_cgroup
145 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
146 [    0.000000] hpet clockevent registered
147 [    0.000000] tsc: Fast TSC calibration using PIT
148 [    0.001000] tsc: Detected 1097.504 MHz processor
149 [    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.00 BogoMIPS (lpj=1097504)
150 [    0.000009] pid_max: default: 32768 minimum: 301
151 [    0.000063] Security Framework initialized
152 [    0.000075] SELinux:  Initializing.
153 [    0.000092] SELinux:  Starting in permissive mode
154 [    0.000514] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
155 [    0.001496] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
156 [    0.001910] Mount-cache hash table entries: 256
157 [    0.002241] Initializing cgroup subsys memory
158 [    0.002257] Initializing cgroup subsys devices
159 [    0.002260] Initializing cgroup subsys freezer
160 [    0.002263] Initializing cgroup subsys net_cls
161 [    0.002265] Initializing cgroup subsys blkio
162 [    0.002268] Initializing cgroup subsys perf_event
163 [    0.002272] Initializing cgroup subsys hugetlb
164 [    0.002314] CPU: Physical Processor ID: 0
165 [    0.002316] CPU: Processor Core ID: 0
166 [    0.002326] mce: CPU supports 7 MCE banks
167 [    0.002348] CPU0: Thermal monitoring enabled (TM1)
168 [    0.002363] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
169 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
170 tlb_flushall_shift: 5
171 [    0.002567] Freeing SMP alternatives memory: 24K (ffffffff81e5d000 - ffffffff81e63000)
172 [    0.005585] ACPI: Core revision 20130517
173 [    0.010088] ACPI: All ACPI Tables successfully acquired
174 [    0.012166] ftrace: allocating 25126 entries in 99 pages
175 [    0.039543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
176 [    0.049550] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
177 [    0.049564] TSC deadline timer enabled
178 [    0.049580] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
179 [    0.049595] ... version:                3
180 [    0.049597] ... bit width:              48
181 [    0.049599] ... generic registers:      8
182 [    0.049602] ... value mask:             0000ffffffffffff
183 [    0.049604] ... max period:             0000ffffffffffff
184 [    0.049606] ... fixed-purpose events:   3
185 [    0.049608] ... event mask:             00000007000000ff
186 [    0.051970] smpboot: Booting Node   0, Processors  #1 OK
187 [    0.065251] Brought up 2 CPUs
188 [    0.065257] smpboot: Total of 2 processors activated (4390.01 BogoMIPS)
189 [    0.065358] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
190 [    0.067703] devtmpfs: initialized
191 [    0.069836] atomic64 test passed for x86-64 platform with CX8 and with SSE
192 [    0.069864] RTC time: 19:33:51, date: 12/07/13
193 [    0.069955] NET: Registered protocol family 16
194 [    0.070314] ACPI: bus type PCI registered
195 [    0.070318] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
196 [    0.070411] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
197 [    0.070416] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
198 [    0.079834] PCI: Using configuration type 1 for base access
199 [    0.081416] bio: create slab <bio-0> at 0
200 [    0.081596] ACPI: Added _OSI(Module Device)
201 [    0.081600] ACPI: Added _OSI(Processor Device)
202 [    0.081603] ACPI: Added _OSI(3.0 _SCP Extensions)
203 [    0.081606] ACPI: Added _OSI(Processor Aggregator Device)
204 [    0.083143] ACPI: EC: Look up EC in DSDT
205 [    0.086919] ACPI: Interpreter enabled
206 [    0.086929] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
207 [    0.086938] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
208 [    0.086963] ACPI: (supports S0 S3 S4 S5)
209 [    0.086966] ACPI: Using IOAPIC for interrupt routing
210 [    0.087001] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
211 [    0.087145] ACPI: No dock devices found.
212 [    0.094417] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
213 [    0.094496] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
214 [    0.094555] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
215 [    0.094740] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
216 [    0.094749] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
217 [    0.094903] PCI host bridge to bus 0000:00
218 [    0.094909] pci_bus 0000:00: root bus resource [bus 00-ff]
219 [    0.094913] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
220 [    0.094917] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
221 [    0.094921] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
222 [    0.094924] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
223 [    0.094928] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
224 [    0.094931] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
225 [    0.094934] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
226 [    0.094938] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
227 [    0.094941] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
228 [    0.094945] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
229 [    0.094948] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
230 [    0.094952] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
231 [    0.094955] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
232 [    0.094959] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
233 [    0.094962] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
234 [    0.094966] pci_bus 0000:00: root bus resource [mem 0x7ea00000-0xfebfffff]
235 [    0.094969] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
236 [    0.094985] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
237 [    0.095136] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
238 [    0.095158] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
239 [    0.095170] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
240 [    0.095180] pci 0000:00:02.0: reg 0x20: [io  0x1000-0x103f]
241 [    0.095370] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
242 [    0.095411] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
243 [    0.095557] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
244 [    0.095704] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
245 [    0.095743] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
246 [    0.095899] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
247 [    0.095974] pci 0000:00:1a.0: System wakeup disabled by ACPI
248 [    0.096043] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
249 [    0.096076] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
250 [    0.096213] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
251 [    0.096288] pci 0000:00:1b.0: System wakeup disabled by ACPI
252 [    0.096351] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
253 [    0.096507] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
254 [    0.096634] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
255 [    0.096783] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
256 [    0.096927] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
257 [    0.096966] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
258 [    0.097131] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
259 [    0.097202] pci 0000:00:1d.0: System wakeup disabled by ACPI
260 [    0.097261] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
261 [    0.097553] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
262 [    0.097596] pci 0000:00:1f.2: reg 0x10: [io  0x1060-0x1067]
263 [    0.097612] pci 0000:00:1f.2: reg 0x14: [io  0x1070-0x1073]
264 [    0.097630] pci 0000:00:1f.2: reg 0x18: [io  0x1068-0x106f]
265 [    0.097647] pci 0000:00:1f.2: reg 0x1c: [io  0x1074-0x1077]
266 [    0.097665] pci 0000:00:1f.2: reg 0x20: [io  0x1040-0x105f]
267 [    0.097683] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
268 [    0.097782] pci 0000:00:1f.2: PME# supported from D3hot
269 [    0.097896] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
270 [    0.097930] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
271 [    0.097976] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
272 [    0.098123] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
273 [    0.098162] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
274 [    0.098526] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
275 [    0.098592] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
276 [    0.098746] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
277 [    0.098906] pci 0000:01:00.0: supports D1 D2
278 [    0.098909] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
279 [    0.100526] pci 0000:00:1c.0: PCI bridge to [bus 01]
280 [    0.100541] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
281 [    0.100738] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
282 [    0.100805] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
283 [    0.100859] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
284 [    0.100957] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
285 [    0.101144] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
286 [    0.101312] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
287 [    0.101379] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
288 [    0.101707] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
289 [    0.103558] pci 0000:00:1c.1: PCI bridge to [bus 02]
290 [    0.103573] pci 0000:00:1c.1:   bridge window [mem 0xe0600000-0xe06fffff]
291 [    0.103588] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
292 [    0.103878] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
293 [    0.103976] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
294 [    0.104068] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
295 [    0.104161] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
296 [    0.104247] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
297 [    0.104333] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
298 [    0.104419] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
299 [    0.104511] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
300 [    0.105238] ACPI: Enabled 1 GPEs in block 00 to 3F
301 [    0.105252] ACPI: \_SB_.PCI0: notify handler is installed
302 [    0.105313] Found 1 acpi root devices
303 [    0.105368] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
304 [    0.105523] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
305 [    0.105529] vgaarb: loaded
306 [    0.105531] vgaarb: bridge control possible 0000:00:02.0
307 [    0.105660] SCSI subsystem initialized
308 [    0.105663] ACPI: bus type ATA registered
309 [    0.105734] libata version 3.00 loaded.
310 [    0.105767] ACPI: bus type USB registered
311 [    0.105793] usbcore: registered new interface driver usbfs
312 [    0.105810] usbcore: registered new interface driver hub
313 [    0.105852] usbcore: registered new device driver usb
314 [    0.105963] PCI: Using ACPI for IRQ routing
315 [    0.109694] PCI: pci_cache_line_size set to 64 bytes
316 [    0.109795] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
317 [    0.109799] e820: reserve RAM buffer [mem 0x7bec0000-0x7bffffff]
318 [    0.109802] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
319 [    0.109950] NetLabel: Initializing
320 [    0.109952] NetLabel:  domain hash size = 128
321 [    0.109954] NetLabel:  protocols = UNLABELED CIPSOv4
322 [    0.109975] NetLabel:  unlabeled traffic allowed by default
323 [    0.110095] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
324 [    0.110105] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
325 [    0.112145] Switched to clocksource hpet
326 [    0.121774] pnp: PnP ACPI init
327 [    0.121796] ACPI: bus type PNP registered
328 [    0.121906] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
329 [    0.122012] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
330 [    0.122016] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
331 [    0.122020] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
332 [    0.122024] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
333 [    0.122028] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
334 [    0.122032] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
335 [    0.122036] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
336 [    0.122040] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
337 [    0.122044] system 00:01: [mem 0x20000000-0x201fffff] has been reserved
338 [    0.122048] system 00:01: [mem 0x40000000-0x401fffff] has been reserved
339 [    0.122054] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
340 [    0.122568] pnp 00:02: [dma 4]
341 [    0.122605] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
342 [    0.122647] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
343 [    0.122804] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
344 [    0.122810] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
345 [    0.122865] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
346 [    0.122925] system 00:06: [io  0x0500-0x057f] could not be reserved
347 [    0.122930] system 00:06: [io  0x0480-0x04bf] has been reserved
348 [    0.122935] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
349 [    0.122976] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
350 [    0.123039] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
351 [    0.123075] pnp: PnP ACPI: found 9 devices
352 [    0.123078] ACPI: bus type PNP unregistered
353 [    0.130684] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
354 [    0.130692] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
355 [    0.130710] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
356 [    0.130719] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
357 [    0.130723] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
358 [    0.130727] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
359 [    0.130738] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7ea00000-0x7ebfffff 64bit pref]
360 [    0.130744] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
361 [    0.130749] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
362 [    0.130754] pci 0000:00:1c.0: PCI bridge to [bus 01]
363 [    0.130760] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
364 [    0.130770] pci 0000:00:1c.0:   bridge window [mem 0xe0400000-0xe04fffff]
365 [    0.130778] pci 0000:00:1c.0:   bridge window [mem 0x7ea00000-0x7ebfffff 64bit pref]
366 [    0.130791] pci 0000:00:1c.1: PCI bridge to [bus 02]
367 [    0.130796] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
368 [    0.130806] pci 0000:00:1c.1:   bridge window [mem 0xe0600000-0xe06fffff]
369 [    0.130814] pci 0000:00:1c.1:   bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
370 [    0.130832] pci 0000:00:1c.0: enabling device (0106 -> 0107)
371 [    0.130977] pci 0000:00:1c.1: enabling device (0106 -> 0107)
372 [    0.131093] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
373 [    0.131097] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
374 [    0.131101] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
375 [    0.131105] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
376 [    0.131108] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
377 [    0.131112] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
378 [    0.131116] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
379 [    0.131119] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
380 [    0.131122] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
381 [    0.131126] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
382 [    0.131129] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
383 [    0.131133] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
384 [    0.131136] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
385 [    0.131140] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
386 [    0.131154] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
387 [    0.131157] pci_bus 0000:00: resource 19 [mem 0x7ea00000-0xfebfffff]
388 [    0.131161] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
389 [    0.131165] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
390 [    0.131168] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
391 [    0.131172] pci_bus 0000:01: resource 2 [mem 0x7ea00000-0x7ebfffff 64bit pref]
392 [    0.131176] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
393 [    0.131179] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
394 [    0.131183] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
395 [    0.131246] NET: Registered protocol family 2
396 [    0.131533] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
397 [    0.131651] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
398 [    0.131717] TCP: Hash tables configured (established 16384 bind 16384)
399 [    0.131755] TCP: reno registered
400 [    0.131769] UDP hash table entries: 1024 (order: 3, 32768 bytes)
401 [    0.131789] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
402 [    0.131893] NET: Registered protocol family 1
403 [    0.131912] pci 0000:00:02.0: Boot video device
404 [    0.132458] PCI: CLS 64 bytes, default 64
405 [    0.132523] Unpacking initramfs...
406 [    0.410179] Freeing initrd memory: 7916K (ffff88003707a000 - ffff880037835000)
407 [    0.410186] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
408 [    0.410191] software IO TLB [mem 0x75800000-0x79800000] (64MB) mapped at [ffff880075800000-ffff8800797fffff]
409 [    0.411108] Initialise system trusted keyring
410 [    0.411224] audit: initializing netlink socket (disabled)
411 [    0.411240] type=2000 audit(1386444831.394:1): initialized
412 [    0.457939] HugeTLB registered 2 MB page size, pre-allocated 0 pages
413 [    0.459856] zbud: loaded
414 [    0.460178] VFS: Disk quotas dquot_6.5.2
415 [    0.460249] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
416 [    0.460907] msgmni has been set to 3737
417 [    0.461008] Key type big_key registered
418 [    0.461011] SELinux:  Registering netfilter hooks
419 [    0.461992] alg: No test for stdrng (krng)
420 [    0.462003] NET: Registered protocol family 38
421 [    0.462008] Key type asymmetric registered
422 [    0.462010] Asymmetric key parser 'x509' registered
423 [    0.462068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
424 [    0.462110] io scheduler noop registered
425 [    0.462113] io scheduler deadline registered
426 [    0.462175] io scheduler cfq registered (default)
427 [    0.462355] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
428 [    0.462500] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
429 [    0.462655] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
430 [    0.462659] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
431 [    0.462667] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
432 [    0.462701] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
433 [    0.462704] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
434 [    0.462707] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
435 [    0.462715] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
436 [    0.462734] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
437 [    0.462758] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
438 [    0.462874] intel_idle: MWAIT substates: 0x21120
439 [    0.462877] intel_idle: v0.4 model 0x2A
440 [    0.462880] intel_idle: lapic_timer_reliable_states 0xffffffff
441 [    0.463478] ACPI: AC Adapter [AC] (on-line)
442 [    0.463765] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
443 [    0.463799] ACPI: Lid Switch [LID0]
444 [    0.464012] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
445 [    0.464018] ACPI: Power Button [PWRB]
446 [    0.464070] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
447 [    0.464075] ACPI: Sleep Button [TPAD]
448 [    0.464152] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
449 [    0.464156] ACPI: Power Button [PWRF]
450 [    0.464205] ACPI: Requesting acpi_cpufreq
451 [    0.467155] thermal LNXTHERM:00: registered as thermal_zone0
452 [    0.467160] ACPI: Thermal Zone [THRM] (48 C)
453 [    0.467205] GHES: HEST is not enabled!
454 [    0.467292] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
455 [    0.473677] Non-volatile memory driver v1.3
456 [    0.473682] Linux agpgart interface v0.103
457 [    0.473853] ahci 0000:00:1f.2: version 3.0
458 [    0.474082] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
459 [    0.474144] ahci: SSS flag set, parallel bus scan disabled
460 [    0.474181] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
461 [    0.474188] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst 
462 [    0.474196] ahci 0000:00:1f.2: setting latency timer to 64
463 [    0.474729] scsi0 : ahci
464 [    0.474943] scsi1 : ahci
465 [    0.475152] scsi2 : ahci
466 [    0.475342] scsi3 : ahci
467 [    0.475696] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 42
468 [    0.475699] ata2: DUMMY
469 [    0.475702] ata3: DUMMY
470 [    0.475704] ata4: DUMMY
471 [    0.475997] [Firmware Bug]: battery: (dis)charge rate invalid.
472 [    0.476044] ACPI: Battery Slot [BATX] (battery present)
473 [    0.476075] libphy: Fixed MDIO Bus: probed
474 [    0.476184] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
475 [    0.476187] ehci-pci: EHCI PCI platform driver
476 [    0.476350] ehci-pci 0000:00:1a.0: setting latency timer to 64
477 [    0.476363] ehci-pci 0000:00:1a.0: EHCI Host Controller
478 [    0.476429] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
479 [    0.476451] ehci-pci 0000:00:1a.0: debug port 2
480 [    0.480370] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
481 [    0.480396] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
482 [    0.486155] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
483 [    0.486196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
484 [    0.486200] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
485 [    0.486203] usb usb1: Product: EHCI Host Controller
486 [    0.486207] usb usb1: Manufacturer: Linux 3.11.9-300.fc20.x86_64 ehci_hcd
487 [    0.486210] usb usb1: SerialNumber: 0000:00:1a.0
488 [    0.486380] hub 1-0:1.0: USB hub found
489 [    0.486387] hub 1-0:1.0: 3 ports detected
490 [    0.486700] ehci-pci 0000:00:1d.0: setting latency timer to 64
491 [    0.486711] ehci-pci 0000:00:1d.0: EHCI Host Controller
492 [    0.486780] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
493 [    0.486801] ehci-pci 0000:00:1d.0: debug port 2
494 [    0.490715] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
495 [    0.490738] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
496 [    0.496155] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
497 [    0.496189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
498 [    0.496193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
499 [    0.496196] usb usb2: Product: EHCI Host Controller
500 [    0.496200] usb usb2: Manufacturer: Linux 3.11.9-300.fc20.x86_64 ehci_hcd
501 [    0.496203] usb usb2: SerialNumber: 0000:00:1d.0
502 [    0.496353] hub 2-0:1.0: USB hub found
503 [    0.496360] hub 2-0:1.0: 3 ports detected
504 [    0.496538] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
505 [    0.496540] ohci-pci: OHCI PCI platform driver
506 [    0.496556] uhci_hcd: USB Universal Host Controller Interface driver
507 [    0.496634] usbcore: registered new interface driver usbserial
508 [    0.496645] usbcore: registered new interface driver usbserial_generic
509 [    0.496655] usbserial: USB Serial support registered for generic
510 [    0.496697] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
511 [    0.496699] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
512 [    0.504794] serio: i8042 KBD port at 0x60,0x64 irq 1
513 [    0.504904] mousedev: PS/2 mouse device common for all mice
514 [    0.506427] rtc_cmos 00:07: RTC can wake from S4
515 [    0.506597] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
516 [    0.506636] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
517 [    0.506740] device-mapper: uevent: version 1.0.3
518 [    0.506844] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
519 [    0.506902] Intel P-state driver initializing.
520 [    0.506919] Intel pstate controlling: cpu 0
521 [    0.506944] Intel pstate controlling: cpu 1
522 [    0.507054] cpuidle: using governor menu
523 [    0.507176] hidraw: raw HID events driver (C) Jiri Kosina
524 [    0.507314] usbcore: registered new interface driver usbhid
525 [    0.507317] usbhid: USB HID core driver
526 [    0.507364] drop_monitor: Initializing network drop monitor service
527 [    0.507501] ip_tables: (C) 2000-2006 Netfilter Core Team
528 [    0.507540] TCP: cubic registered
529 [    0.507544] Initializing XFRM netlink socket
530 [    0.507709] NET: Registered protocol family 10
531 [    0.508019] mip6: Mobile IPv6
532 [    0.508023] NET: Registered protocol family 17
533 [    0.508479] PM: Checking hibernation image partition /dev/sda1
534 [    0.550015] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
535 [    0.781260] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
536 [    0.788262] usb 1-1: new high-speed USB device number 2 using ehci-pci
537 [    0.818693] ata1.00: ATA-8: ST320LT020-9YG142, 0010SDM1, max UDMA/133
538 [    0.818703] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
539 [    0.821532] ata1.00: configured for UDMA/133
540 [    0.821969] scsi 0:0:0:0: Direct-Access     ATA      ST320LT020-9YG14 0010 PQ: 0 ANSI: 5
541 [    0.822297] sd 0:0:0:0: Attached scsi generic sg0 type 0
542 [    0.822376] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
543 [    0.822384] sd 0:0:0:0: [sda] 4096-byte physical blocks
544 [    0.822525] sd 0:0:0:0: [sda] Write Protect is off
545 [    0.822532] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
546 [    0.822643] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
547 [    0.850372]  sda: sda1
548 [    0.851333] sd 0:0:0:0: [sda] Attached SCSI disk
549 [    0.851365] PM: Hibernation image partition 8:1 present
550 [    0.851370] PM: Looking for hibernation image.
551 [    0.864869] PM: Image not found (code -22)
552 [    0.864877] PM: Hibernation image not present or could not be loaded.
553 [    0.864900] Loading compiled-in X.509 certificates
554 [    0.867120] Loaded X.509 cert 'Fedora kernel signing key: 6bf54ff322b066a3b87dea3be44a5b6b8728b779'
555 [    0.867157] registered taskstats version 1
556 [    0.867801]   Magic number: 9:607:596
557 [    0.867914] rtc_cmos 00:07: setting system clock to 2013-12-07 19:33:52 UTC (1386444832)
558 [    0.869903] Freeing unused kernel memory: 1424K (ffffffff81cf9000 - ffffffff81e5d000)
559 [    0.869909] Write protecting the kernel read-only data: 12288k
560 [    0.878388] Freeing unused kernel memory: 1688K (ffff88000165a000 - ffff880001800000)
561 [    0.883764] Freeing unused kernel memory: 1232K (ffff880001acc000 - ffff880001c00000)
562 [    0.889719] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
563 [    0.889975] systemd[1]: Running in initial RAM disk.
564 [    0.890068] systemd[1]: Set hostname to <localhost.localdomain>.
565 [    0.899644] systemd[1]: Expecting device dev-disk-by\x2duuid-31a84af4\x2d6d59\x2d4abf\x2db6bd\x2ddce76d787c51.device...
566 [    0.899674] systemd[1]: Starting -.slice.
567 [    0.899930] systemd[1]: Created slice -.slice.
568 [    0.899955] systemd[1]: Starting System Slice.
569 [    0.900094] systemd[1]: Created slice System Slice.
570 [    0.900113] systemd[1]: Starting Slices.
571 [    0.900156] systemd[1]: Reached target Slices.
572 [    0.900172] systemd[1]: Starting Timers.
573 [    0.900189] systemd[1]: Reached target Timers.
574 [    0.900206] systemd[1]: Starting Journal Socket.
575 [    0.900308] systemd[1]: Listening on Journal Socket.
576 [    0.900609] systemd[1]: Starting dracut cmdline hook...
577 [    0.901186] systemd[1]: Starting Journal Service...
578 [    0.901748] systemd[1]: Started Journal Service.
579 [    0.904560] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
580 [    0.904567] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
581 [    0.904850] hub 1-1:1.0: USB hub found
582 [    0.904926] hub 1-1:1.0: 4 ports detected
583 [    0.906639] systemd-journald[59]: Vacuuming done, freed 0 bytes
584 [    1.007173] usb 2-1: new high-speed USB device number 2 using ehci-pci
585 [    1.028203] systemd-udevd[113]: starting version 208
586 [    1.086542] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
587 [    1.086625] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
588 [    1.127554] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
589 [    1.127562] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
590 [    1.127849] hub 2-1:1.0: USB hub found
591 [    1.127919] hub 2-1:1.0: 4 ports detected
592 [    1.131990] [drm] Initialized drm 1.1.0 20060810
593 [    1.173921] [drm] Memory usable by graphics device = 2048M
594 [    1.173934] i915 0000:00:02.0: setting latency timer to 64
595 [    1.219301] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
596 [    1.220176] i915 0000:00:02.0: irq 43 for MSI/MSI-X
597 [    1.220191] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
598 [    1.220193] [drm] Driver supports precise vblank timestamp query.
599 [    1.220299] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
600 [    1.306048] usb 1-1.1: string descriptor 0 read error: -22
601 [    1.306169] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e04e
602 [    1.306174] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
603 [    1.306869] [drm] Wrong MCH_SSKPD value: 0x16040307
604 [    1.306872] [drm] This can cause pipe underruns and display issues.
605 [    1.306874] [drm] Please upgrade your BIOS to fix this.
606 [    1.320384] fbcon: inteldrmfb (fb0) is primary device
607 [    1.380343] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
608 [    1.411192] tsc: Refined TSC clocksource calibration: 1097.507 MHz
609 [    1.520249] usb 1-1.3: New USB device found, idVendor=064e, idProduct=d251
610 [    1.520253] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
611 [    1.520256] usb 1-1.3: Product: HD WebCam
612 [    1.520259] usb 1-1.3: Manufacturer: SuYin
613 [    1.520262] usb 1-1.3: SerialNumber: HF1016-A21U-OV02-VA-R01.00.03
614 [    2.048966] Console: switching to colour frame buffer device 170x48
615 [    2.055274] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
616 [    2.055276] i915 0000:00:02.0: registered panic notifier
617 [    2.055301] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
618 [    2.142284] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
619 [    2.411154] Switched to clocksource tsc
620 [    2.492383] systemd-journald[59]: Received SIGTERM
621 [    2.723530] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
622 [    3.485256] SELinux:  Disabled at runtime.
623 [    3.485304] SELinux:  Unregistering netfilter hooks
624 [    3.518135] type=1404 audit(1386444835.149:2): selinux=0 auid=4294967295 ses=4294967295
625 [    3.675968] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
626 [    6.122981] systemd-readahead[232]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
627 [    6.577212] systemd-journald[240]: Vacuuming done, freed 0 bytes
628 [    7.668515] systemd-udevd[256]: starting version 208
629 [    8.000021] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
630 [    8.416560] mei_me 0000:00:16.0: setting latency timer to 64
631 [    8.416622] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
632 [    8.424441] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20130517/utaddress-251)
633 [    8.424453] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
634 [    8.424459] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
635 [    8.424465] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
636 [    8.424468] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20130517/utaddress-251)
637 [    8.424473] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
638 [    8.424476] lpc_ich: Resource conflict(s) found affecting gpio_ich
639 [    8.476727] iTCO_vendor_support: vendor-support=0
640 [    8.540737] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
641 [    8.569620] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-7/7-0067/input/input6
642 [    8.770798] media: Linux media interface: v0.10
643 [    8.799484] Linux video capture interface: v2.00
644 [    8.802106] sdhci: Secure Digital Host Controller Interface driver
645 [    8.802112] sdhci: Copyright(c) Pierre Ossman
646 [    8.804880] pps_core: LinuxPPS API ver. 1 registered
647 [    8.804885] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
648 [    8.828526] Bluetooth: Core ver 2.16
649 [    8.828555] NET: Registered protocol family 31
650 [    8.828559] Bluetooth: HCI device and connection manager initialized
651 [    8.828570] Bluetooth: HCI socket layer initialized
652 [    8.828575] Bluetooth: L2CAP socket layer initialized
653 [    8.828591] Bluetooth: SCO socket layer initialized
654 [    8.903649] usbcore: registered new interface driver btusb
655 [    8.912672] cfg80211: Calling CRDA to update world regulatory domain
656 [    9.000356] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
657 [    9.000400] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
658 [    9.000554] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
659 [    9.055428] EXT4-fs (sda1): re-mounted. Opts: (null)
660 [    9.079293] PTP clock support registered
661 [    9.081609] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
662 [    9.082889] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
663 [    9.093779] usbcore: registered new interface driver ath3k
664 [    9.126812] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
665 [    9.241130] tg3.c:v3.132 (May 21, 2013)
666 [    9.255889] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:63:0c:3d
667 [    9.255897] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
668 [    9.255902] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
669 [    9.255906] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
670 [    9.376999] uvcvideo: Found UVC 1.00 device HD WebCam (064e:d251)
671 [    9.381563] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
672 [    9.382584] usbcore: registered new interface driver uvcvideo
673 [    9.382589] USB Video Class driver (1.1.1)
674 [    9.582810] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
675 [    9.597183] ALSA sound/pci/hda/patch_realtek.c:418 SKU: Nid=0x1d sku_cfg=0x4015812d
676 [    9.597190] ALSA sound/pci/hda/patch_realtek.c:420 SKU: port_connectivity=0x1
677 [    9.597193] ALSA sound/pci/hda/patch_realtek.c:421 SKU: enable_pcbeep=0x1
678 [    9.597197] ALSA sound/pci/hda/patch_realtek.c:422 SKU: check_sum=0x00000005
679 [    9.597200] ALSA sound/pci/hda/patch_realtek.c:423 SKU: customization=0x00000081
680 [    9.597203] ALSA sound/pci/hda/patch_realtek.c:424 SKU: external_amp=0x5
681 [    9.597206] ALSA sound/pci/hda/patch_realtek.c:425 SKU: platform_type=0x1
682 [    9.597208] ALSA sound/pci/hda/patch_realtek.c:426 SKU: swap=0x0
683 [    9.597211] ALSA sound/pci/hda/patch_realtek.c:427 SKU: override=0x1
684 [    9.597804] ALSA sound/pci/hda/hda_auto_parser.c:393 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
685 [    9.597808] ALSA sound/pci/hda/hda_auto_parser.c:397    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
686 [    9.597812] ALSA sound/pci/hda/hda_auto_parser.c:401    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
687 [    9.597815] ALSA sound/pci/hda/hda_auto_parser.c:402    mono: mono_out=0x0
688 [    9.597817] ALSA sound/pci/hda/hda_auto_parser.c:406    inputs:
689 [    9.597821] ALSA sound/pci/hda/hda_auto_parser.c:410      Internal Mic=0x1b
690 [    9.597862] ALSA sound/pci/hda/hda_auto_parser.c:410      Mic=0x19
691 [    9.597866] ALSA sound/pci/hda/patch_realtek.c:490 realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d
692 [    9.597869] ALSA sound/pci/hda/patch_realtek.c:506 realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
693 [    9.615856] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
694 [    9.615997] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
695 [    9.616084] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
696 [    9.616173] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
697 [    9.616256] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
698 [    9.634414] ath: phy0: ASPM enabled: 0x43
699 [    9.634422] ath: EEPROM regdomain: 0x6c
700 [    9.634424] ath: EEPROM indicates we should expect a direct regpair map
701 [    9.634428] ath: Country alpha2 being used: 00
702 [    9.634430] ath: Regpair used: 0x6c
703 [    9.641029] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
704 [    9.641542] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90016200000, irq=17
705 [    9.684966] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
706 [    9.686334] microcode: CPU0 updated to revision 0x29, date = 2013-06-12
707 [    9.686399] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
708 [    9.686486] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
709 [    9.687202] microcode: CPU1 updated to revision 0x29, date = 2013-06-12
710 [    9.687292] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
711 [    9.693820] cfg80211: World regulatory domain updated:
712 [    9.693826] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
713 [    9.693830] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
714 [    9.693833] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
715 [    9.693836] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
716 [    9.693839] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
717 [    9.693842] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
718 [    9.699555] alg: No test for crc32 (crc32-pclmul)
719 [    9.786103] systemd-udevd[263]: renamed network interface wlan0 to wlp1s0
720 [   10.045458] systemd-journald[240]: Received request to flush runtime journal from PID 1
721 [   10.199204] Adding 1999996k swap on /swap.  Priority:-1 extents:22 across:3679356k FS
722 [   10.201174] systemd-udevd[257]: renamed network interface eth0 to enp2s0f0
723 [   11.068616] type=1305 audit(1386444842.699:3): audit_pid=341 old=0 auid=4294967295 ses=4294967295
724  res=1
725 [   35.251939] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
726 [   35.276216] ip6_tables: (C) 2000-2006 Netfilter Core Team
727 [   35.332360] Ebtables v2.0 registered
728 [   35.354848] Bridge firewalling registered
729 [   35.709627] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
730 [   35.709635] Bluetooth: BNEP filters: protocol multicast
731 [   35.709651] Bluetooth: BNEP socket layer initialized
732 [   36.946321] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
733 [   36.946334] tg3 0000:02:00.0: irq 47 for MSI/MSI-X
734 [   36.946342] tg3 0000:02:00.0: irq 48 for MSI/MSI-X
735 [   37.505818] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
736 [   37.516657] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
737 [   45.276641] wlp1s0: authenticate with a0:f3:c1:db:e3:48
738 [   45.289531] wlp1s0: send auth to a0:f3:c1:db:e3:48 (try 1/3)
739 [   45.319629] wlp1s0: authenticated
740 [   45.320921] wlp1s0: associate with a0:f3:c1:db:e3:48 (try 1/3)
741 [   45.336793] wlp1s0: RX AssocResp from a0:f3:c1:db:e3:48 (capab=0x431 status=0 aid=6)
742 [   45.336869] wlp1s0: associated
743 [   45.336915] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready