hp/pavilion_m6_1035dx/4.0-5780-g288c958/2014-04-17T02:42:44Z
[board-status.git] / asus / m2v-mx_se / 4.0-5192-g812d624-dirty / 2014-01-03T21:05:09Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
4 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro recovery nomodeset
5 [    0.000000] KERNEL supported cpus:
6 [    0.000000]   Intel GenuineIntel
7 [    0.000000]   AMD AuthenticAMD
8 [    0.000000]   Centaur CentaurHauls
9 [    0.000000] e820: BIOS-provided physical RAM map:
10 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11 [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12 [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001dedffff] usable
14 [    0.000000] BIOS-e820: [mem 0x000000001dee0000-0x000000001fffffff] reserved
15 [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
16 [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
17 [    0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
18 [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
19 [    0.000000] NX (Execute Disable) protection: active
20 [    0.000000] DMI present.
21 [    0.000000] DMI: ASUS M2V-MX SE, BIOS 4.0-5192-g812d624 01/03/2014
22 [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
23 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24 [    0.000000] AGP bridge at 00:00:00
25 [    0.000000] Aperture from AGP @ c0000000 old size 32 MB
26 [    0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
27 [    0.000000] e820: last_pfn = 0x1dee0 max_arch_pfn = 0x400000000
28 [    0.000000] MTRR default type: uncachable
29 [    0.000000] MTRR fixed ranges enabled:
30 [    0.000000]   00000-9FFFF write-back
31 [    0.000000]   A0000-BFFFF uncachable
32 [    0.000000]   C0000-FFFFF write-back
33 [    0.000000] MTRR variable ranges enabled:
34 [    0.000000]   0 base 0000000000 mask FFE0000000 write-back
35 [    0.000000]   1 base 001E000000 mask FFFE000000 uncachable
36 [    0.000000]   2 disabled
37 [    0.000000]   3 disabled
38 [    0.000000]   4 disabled
39 [    0.000000]   5 disabled
40 [    0.000000]   6 disabled
41 [    0.000000]   7 disabled
42 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43 [    0.000000] original variable MTRRs
44 [    0.000000] reg 0, base: 0GB, range: 512MB, type WB
45 [    0.000000] reg 1, base: 480MB, range: 32MB, type UC
46 [    0.000000] total RAM covered: 480M
47 [    0.000000] Found optimal setting for mtrr clean up
48 [    0.000000]  gran_size: 64K  chunk_size: 64M         num_reg: 2      lose cover RAM: 0G
49 [    0.000000] New variable MTRRs
50 [    0.000000] reg 0, base: 0GB, range: 512MB, type WB
51 [    0.000000] reg 1, base: 480MB, range: 32MB, type UC
52 [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
53 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
54 [    0.000000] init_memory_mapping: [mem 0x00000000-0x1dedffff]
55 [    0.000000]  [mem 0x00000000-0x1ddfffff] page 2M
56 [    0.000000]  [mem 0x1de00000-0x1dedffff] page 4k
57 [    0.000000] kernel direct mapping tables up to 0x1dedffff @ [mem 0x1dedd000-0x1dedffff]
58 [    0.000000] RAMDISK: [mem 0x1c9c5000-0x1d84bfff]
59 [    0.000000] ACPI: RSDP 00000000000fdbd0 00014 (v00 CORE  )
60 [    0.000000] ACPI: RSDT 000000001dee0424 00040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
61 [    0.000000] ACPI: FACP 000000001dee0efd 000F4 (v04 CORE   COREBOOT 00000000 CORE 0000002A)
62 [    0.000000] ACPI: DSDT 000000001dee0540 009BD (v01 CORE   COREBOOT 00000001 INTL 20130626)
63 [    0.000000] ACPI: FACS 000000001dee0500 00040
64 [    0.000000] ACPI: HPET 000000001dee0ff1 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
65 [    0.000000] ACPI: APIC 000000001dee1029 00074 (v01 CORE   COREBOOT 00000000 CORE 00000000)
66 [    0.000000] ACPI: MCFG 000000001dee109d 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
67 [    0.000000] ACPI: SRAT 000000001dee10d9 000A0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
68 [    0.000000] ACPI: SLIT 000000001dee1179 0002D (v01 CORE   COREBOOT 00000000 CORE 00000000)
69 [    0.000000] ACPI: SSDT 000000001dee11a6 00361 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
70 [    0.000000] ACPI: Local APIC address 0xfee00000
71 [    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
72 [    0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
73 [    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
74 [    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x1fffffff]
75 [    0.000000] NUMA: Initialized distance table, cnt=1
76 [    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x1dedffff] -> [mem 0x00000000-0x1dedffff]
77 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x1dedffff]
78 [    0.000000]   NODE_DATA [mem 0x1ded9000-0x1dedcfff]
79 [    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001bc00000-ffff88001c3fffff] on node 0
80 [    0.000000] Zone ranges:
81 [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
82 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
83 [    0.000000]   Normal   empty
84 [    0.000000] Movable zone start for each node
85 [    0.000000] Early memory node ranges
86 [    0.000000]   node   0: [mem 0x00010000-0x0009efff]
87 [    0.000000]   node   0: [mem 0x00100000-0x1dedffff]
88 [    0.000000] On node 0 totalpages: 122479
89 [    0.000000]   DMA zone: 64 pages used for memmap
90 [    0.000000]   DMA zone: 6 pages reserved
91 [    0.000000]   DMA zone: 3913 pages, LIFO batch:0
92 [    0.000000]   DMA32 zone: 1852 pages used for memmap
93 [    0.000000]   DMA32 zone: 116644 pages, LIFO batch:31
94 [    0.000000] ACPI: PM-Timer IO Port: 0x508
95 [    0.000000] ACPI: Local APIC address 0xfee00000
96 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
97 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
98 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
99 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
100 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
101 [    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
102 [    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
103 [    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
104 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
105 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
106 [    0.000000] ACPI: IRQ0 used by override.
107 [    0.000000] ACPI: IRQ2 used by override.
108 [    0.000000] ACPI: IRQ9 used by override.
109 [    0.000000] Using ACPI (MADT) for SMP configuration information
110 [    0.000000] ACPI: HPET id: 0x11068201 base: 0xfed00000
111 [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
112 [    0.000000] nr_irqs_gsi: 64
113 [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
114 [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
115 [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
116 [    0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
117 [    0.000000] Booting paravirtualized kernel on bare hardware
118 [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
119 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001dc00000 s83584 r8192 d22912 u1048576
120 [    0.000000] pcpu-alloc: s83584 r8192 d22912 u1048576 alloc=1*2097152
121 [    0.000000] pcpu-alloc: [0] 0 1 
122 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 120557
123 [    0.000000] Policy zone: DMA32
124 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro recovery nomodeset
125 [    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
126 [    0.000000] __ex_table already sorted, skipping sort
127 [    0.000000] Checking aperture...
128 [    0.000000] AGP bridge at 00:00:00
129 [    0.000000] Aperture from AGP @ c0000000 old size 32 MB
130 [    0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
131 [    0.000000] Node 0: aperture @ f4000000 size 64 MB
132 [    0.000000] Memory: 450804k/490368k available (6711k kernel code, 452k absent, 39112k reserved, 6459k data, 928k init)
133 [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
134 [    0.000000] Hierarchical RCU implementation.
135 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
136 [    0.000000] NR_IRQS:16640 nr_irqs:512 16
137 [    0.000000] Extended CMOS year: 2000
138 [    0.000000] spurious 8259A interrupt: IRQ7.
139 [    0.000000] Console: colour VGA+ 80x25
140 [    0.000000] console [tty0] enabled
141 [    0.000000] allocated 2097152 bytes of page_cgroup
142 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
143 [    0.000000] hpet clockevent registered
144 [    0.000000] Fast TSC calibration using PIT
145 [    0.000000] Detected 2100.210 MHz processor.
146 [    0.000000] Marking TSC unstable due to TSCs unsynchronized
147 [    0.004068] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.42 BogoMIPS (lpj=8400840)
148 [    0.004195] pid_max: default: 32768 minimum: 301
149 [    0.004289] Security Framework initialized
150 [    0.004371] AppArmor: AppArmor initialized
151 [    0.004432] Yama: becoming mindful.
152 [    0.004600] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
153 [    0.005046] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
154 [    0.005315] Mount-cache hash table entries: 256
155 [    0.005653] Initializing cgroup subsys cpuacct
156 [    0.005718] Initializing cgroup subsys memory
157 [    0.005792] Initializing cgroup subsys devices
158 [    0.005854] Initializing cgroup subsys freezer
159 [    0.005916] Initializing cgroup subsys blkio
160 [    0.005978] Initializing cgroup subsys perf_event
161 [    0.006074] tseg: 0000000000
162 [    0.006093] CPU: Physical Processor ID: 0
163 [    0.006154] CPU: Processor Core ID: 0
164 [    0.006215] mce: CPU supports 5 MCE banks
165 [    0.006287] LVT offset 0 assigned for vector 0xf9
166 [    0.006353] using AMD E400 aware idle routine
167 [    0.009929] ACPI: Core revision 20120320
168 [    0.010428] ftrace: allocating 25118 entries in 99 pages
169 [    0.021349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
170 [    0.063593] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ stepping 01
171 [    0.064003] Performance Events: AMD PMU driver.
172 [    0.064003] ... version:                0
173 [    0.064003] ... bit width:              48
174 [    0.064003] ... generic registers:      4
175 [    0.064003] ... value mask:             0000ffffffffffff
176 [    0.064003] ... max period:             00007fffffffffff
177 [    0.064003] ... fixed-purpose events:   0
178 [    0.064003] ... event mask:             000000000000000f
179 [    0.064003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
180 [    0.064003] Booting Node   0, Processors  #1 Ok.
181 [    0.152135] Brought up 2 CPUs
182 [    0.152196] Total of 2 processors activated (8400.57 BogoMIPS).
183 [    0.153066] devtmpfs: initialized
184 [    0.153843] EVM: security.selinux
185 [    0.153904] EVM: security.SMACK64
186 [    0.153963] EVM: security.capability
187 [    0.156476] dummy: 
188 [    0.156589] RTC time: 21:19:12, date: 01/03/14
189 [    0.156701] NET: Registered protocol family 16
190 [    0.156779] Trying to unpack rootfs image as initramfs...
191 [    0.156932] node 0 link 0: io port [1000, 1fff]
192 [    0.156935] TOM: 0000000020000000 aka 512M
193 [    0.156938] node 0 link 0: mmio [a0000, bffff]
194 [    0.156940] node 0 link 0: mmio [e0000000, f12fffff]
195 [    0.156942] node 0 link 0: mmio [c0000000, dfffffff]
196 [    0.156944] bus: [00, 05] on node 0 link 0
197 [    0.156946] bus: 00 [io  0x0000-0xffff]
198 [    0.156947] bus: 00 [mem 0x000a0000-0x000bffff]
199 [    0.156948] bus: 00 [mem 0x20000000-0xfcffffffff]
200 [    0.157169] ACPI FADT declares the system doesn't support MSI, so disable it
201 [    0.157236] ACPI: bus type pci registered
202 [    0.157358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
203 [    0.157436] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
204 [    0.165980] PCI: Using configuration type 1 for base access
205 [    0.172136] bio: create slab <bio-0> at 0
206 [    0.172332] ACPI: Added _OSI(Module Device)
207 [    0.172394] ACPI: Added _OSI(Processor Device)
208 [    0.172456] ACPI: Added _OSI(3.0 _SCP Extensions)
209 [    0.172518] ACPI: Added _OSI(Processor Aggregator Device)
210 [    0.172773] ACPI: EC: Look up EC in DSDT
211 [    0.173554] ACPI: Interpreter enabled
212 [    0.173618] ACPI: (supports S0 S3 S5)
213 [    0.173831] ACPI: Using IOAPIC for interrupt routing
214 [    0.174553] ACPI: No dock devices found.
215 [    0.174618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
216 [    0.176230] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-05])
217 [    0.178839] pci_root PNP0A03:00: >host bridge window [io  0x03b0-0x03df]
218 [    0.178905] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0x1fff]
219 [    0.178970] pci_root PNP0A03:00: >host bridge window [mem 0xc0000000-0xdfffffff]
220 [    0.179045] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xf12fffff]
221 [    0.179120] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
222 [    0.179195] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
223 [    0.179262] pci_root PNP0A03:00: >host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7] ignored
224 [    0.179374] PCI host bridge to bus 0000:00
225 [    0.179437] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
226 [    0.179501] pci_bus 0000:00: >root bus resource [io  0x0d00-0x1fff]
227 [    0.179566] pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xdfffffff]
228 [    0.179632] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xf12fffff]
229 [    0.180022] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
230 [    0.180110] pci 0000:00:00.0: >[1106:0336] type 00 class 0x060000
231 [    0.180124] pci 0000:00:00.0: >reg 10: [mem 0xc0000000-0xcfffffff pref]
232 [    0.180232] pci 0000:00:00.1: >[1106:1336] type 00 class 0x060000
233 [    0.180286] pci 0000:00:00.2: >[1106:2336] type 00 class 0x060000
234 [    0.180340] pci 0000:00:00.3: >[1106:3336] type 00 class 0x060000
235 [    0.180393] pci 0000:00:00.4: >[1106:4336] type 00 class 0x060000
236 [    0.180446] pci 0000:00:00.5: >[1106:5336] type 00 class 0x080020
237 [    0.180522] pci 0000:00:00.6: >[1106:6290] type 00 class 0x060000
238 [    0.180576] pci 0000:00:00.7: >[1106:7336] type 00 class 0x060000
239 [    0.180636] pci 0000:00:01.0: >[1106:b188] type 01 class 0x060400
240 [    0.180703] pci 0000:00:02.0: >[1106:a238] type 01 class 0x060400
241 [    0.180789] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
242 [    0.180822] pci 0000:00:03.0: >[1106:c238] type 01 class 0x060400
243 [    0.180907] pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
244 [    0.180951] pci 0000:00:0f.0: >[1106:5372] type 00 class 0x01018f
245 [    0.180968] pci 0000:00:0f.0: >reg 10: [io  0x18a0-0x18a7]
246 [    0.180978] pci 0000:00:0f.0: >reg 14: [io  0x18b0-0x18b3]
247 [    0.180988] pci 0000:00:0f.0: >reg 18: [io  0x18a8-0x18af]
248 [    0.180998] pci 0000:00:0f.0: >reg 1c: [io  0x18b4-0x18b7]
249 [    0.181008] pci 0000:00:0f.0: >reg 20: [io  0x1880-0x188f]
250 [    0.181018] pci 0000:00:0f.0: >reg 24: [io  0x1000-0x10ff]
251 [    0.181072] pci 0000:00:0f.1: >[1106:0571] type 00 class 0x01018a
252 [    0.181117] pci 0000:00:0f.1: >reg 20: [io  0x1890-0x189f]
253 [    0.181185] pci 0000:00:10.0: >[1106:3038] type 00 class 0x0c0300
254 [    0.181229] pci 0000:00:10.0: >reg 20: [io  0x1800-0x181f]
255 [    0.181269] pci 0000:00:10.0: >supports D1 D2
256 [    0.181272] pci 0000:00:10.0: >PME# supported from D0 D1 D2 D3hot D3cold
257 [    0.181292] pci 0000:00:10.1: >[1106:3038] type 00 class 0x0c0300
258 [    0.181336] pci 0000:00:10.1: >reg 20: [io  0x1820-0x183f]
259 [    0.181377] pci 0000:00:10.1: >supports D1 D2
260 [    0.181379] pci 0000:00:10.1: >PME# supported from D0 D1 D2 D3hot D3cold
261 [    0.181400] pci 0000:00:10.2: >[1106:3038] type 00 class 0x0c0300
262 [    0.181444] pci 0000:00:10.2: >reg 20: [io  0x1840-0x185f]
263 [    0.181485] pci 0000:00:10.2: >supports D1 D2
264 [    0.181487] pci 0000:00:10.2: >PME# supported from D0 D1 D2 D3hot D3cold
265 [    0.181510] pci 0000:00:10.3: >[1106:3038] type 00 class 0x0c0300
266 [    0.181554] pci 0000:00:10.3: >reg 20: [io  0x1860-0x187f]
267 [    0.181595] pci 0000:00:10.3: >supports D1 D2
268 [    0.181598] pci 0000:00:10.3: >PME# supported from D0 D1 D2 D3hot D3cold
269 [    0.181620] pci 0000:00:10.4: >[1106:3104] type 00 class 0x0c0320
270 [    0.181639] pci 0000:00:10.4: >reg 10: [mem 0xf1200000-0xf12000ff]
271 [    0.181716] pci 0000:00:10.4: >supports D1 D2
272 [    0.181718] pci 0000:00:10.4: >PME# supported from D0 D1 D2 D3hot D3cold
273 [    0.181744] pci 0000:00:11.0: >[1106:3372] type 00 class 0x060100
274 [    0.181852] pci 0000:00:11.7: >[1106:287e] type 00 class 0x060000
275 [    0.181918] pci 0000:00:12.0: >[1106:3065] type 00 class 0x020000
276 [    0.181935] pci 0000:00:12.0: >reg 10: [io  0x1400-0x14ff]
277 [    0.181945] pci 0000:00:12.0: >reg 14: [mem 0xf1200100-0xf12001ff]
278 [    0.182008] pci 0000:00:12.0: >supports D1 D2
279 [    0.182010] pci 0000:00:12.0: >PME# supported from D0 D1 D2 D3hot D3cold
280 [    0.182032] pci 0000:00:13.0: >[1106:337b] type 01 class 0x060400
281 [    0.182111] pci 0000:00:13.1: >[1106:337a] type 01 class 0x060401
282 [    0.182199] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
283 [    0.182225] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
284 [    0.182251] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
285 [    0.182269] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
286 [    0.182332] pci 0000:01:00.0: >[1106:3230] type 00 class 0x030000
287 [    0.182348] pci 0000:01:00.0: >reg 10: [mem 0xd0000000-0xdfffffff pref]
288 [    0.182356] pci 0000:01:00.0: >reg 14: [mem 0xf0000000-0xf0ffffff]
289 [    0.182386] pci 0000:01:00.0: >reg 30: [mem 0xf1000000-0xf100ffff pref]
290 [    0.182414] pci 0000:01:00.0: >supports D1 D2
291 [    0.182450] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
292 [    0.182517] pci 0000:00:01.0: >  bridge window [mem 0xf0000000-0xf10fffff]
293 [    0.182522] pci 0000:00:01.0: >  bridge window [mem 0xd0000000-0xdfffffff pref]
294 [    0.182571] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
295 [    0.182690] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
296 [    0.182804] pci 0000:04:01.0: >[1106:3288] type 00 class 0x040300
297 [    0.182820] pci 0000:04:01.0: >reg 10: [mem 0xf1100000-0xf1103fff 64bit]
298 [    0.182886] pci 0000:04:01.0: >PME# supported from D0 D3hot D3cold
299 [    0.182899] pci 0000:04:01.0: >disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
300 [    0.183013] pci 0000:00:13.0: >PCI bridge to [bus 04-04]
301 [    0.183079] pci 0000:00:13.0: >  bridge window [mem 0xf1100000-0xf11fffff]
302 [    0.183150] pci 0000:00:13.1: >PCI bridge to [bus 05-05] (subtractive decode)
303 [    0.183223] pci 0000:00:13.1: >  bridge window [io  0x0000-0x0cf7] (subtractive decode)
304 [    0.183226] pci 0000:00:13.1: >  bridge window [io  0x0d00-0x1fff] (subtractive decode)
305 [    0.183229] pci 0000:00:13.1: >  bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
306 [    0.183231] pci 0000:00:13.1: >  bridge window [mem 0xe0000000-0xf12fffff] (subtractive decode)
307 [    0.183234] pci 0000:00:13.1: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
308 [    0.183260] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
309 [    0.183309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGG._PRT]
310 [    0.183328] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
311 [    0.183344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
312 [    0.183365] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TBRG._PRT]
313 [    0.184023]  pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x0f)
314 [    0.186996] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
315 [    0.187074] vgaarb: loaded
316 [    0.187133] vgaarb: bridge control possible 0000:01:00.0
317 [    0.187453] SCSI subsystem initialized
318 [    0.187609] libata version 3.00 loaded.
319 [    0.187646] ACPI: bus type usb registered
320 [    0.187742] usbcore: registered new interface driver usbfs
321 [    0.187815] usbcore: registered new interface driver hub
322 [    0.187914] usbcore: registered new device driver usb
323 [    0.188120] PCI: Using ACPI for IRQ routing
324 [    0.196646] PCI: pci_cache_line_size set to 64 bytes
325 [    0.196778] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
326 [    0.196781] e820: reserve RAM buffer [mem 0x1dee0000-0x1fffffff]
327 [    0.196920] NetLabel: Initializing
328 [    0.196981] NetLabel:  domain hash size = 128
329 [    0.197042] NetLabel:  protocols = UNLABELED CIPSOv4
330 [    0.197121] NetLabel:  unlabeled traffic allowed by default
331 [    0.197263] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
332 [    0.197332] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
333 [    0.197578] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
334 [    0.204193] Switching to clocksource hpet
335 [    0.214943] AppArmor: AppArmor Filesystem Enabled
336 [    0.215055] pnp: PnP ACPI init
337 [    0.215140] ACPI: bus type pnp registered
338 [    0.216769] pnp 00:00: >[bus 00-05]
339 [    0.216774] pnp 00:00: >[io  0x03b0-0x03df window]
340 [    0.216777] pnp 00:00: >[io  0x0d00-0x1fff window]
341 [    0.216780] pnp 00:00: >[mem 0xc0000000-0xdfffffff window]
342 [    0.216782] pnp 00:00: >[mem 0xe0000000-0xf12fffff window]
343 [    0.216785] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
344 [    0.216788] pnp 00:00: >[io  0x0cf8-0x0cff]
345 [    0.216790] pnp 00:00: >[io  0x0000-0x0cf7 window]
346 [    0.216836] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
347 [    0.216872] pnp 00:01: >[io  0x0060]
348 [    0.216875] pnp 00:01: >[io  0x0064]
349 [    0.216891] pnp 00:01: >[irq 1]
350 [    0.216921] pnp 00:01: >Plug and Play ACPI device, IDs PNP0303 (active)
351 [    0.216952] pnp 00:02: >[irq 12]
352 [    0.216976] pnp 00:02: >Plug and Play ACPI device, IDs PNP0f13 (active)
353 [    0.217002] pnp 00:03: >[io  0x03f2-0x03f5]
354 [    0.217005] pnp 00:03: >[io  0x03f7]
355 [    0.217012] pnp 00:03: >[irq 6]
356 [    0.217014] pnp 00:03: >[dma 2]
357 [    0.217043] pnp 00:03: >Plug and Play ACPI device, IDs PNP0700 (active)
358 [    0.217056] pnp 00:04: >[mem 0x1e000000-0x1fffffff]
359 [    0.217059] pnp 00:04: >[mem 0xfec00000-0xfec000ff]
360 [    0.217061] pnp 00:04: >[mem 0xff000000-0xffffffff]
361 [    0.217064] pnp 00:04: >[mem 0xfecc0000-0xfecc00ff]
362 [    0.217066] pnp 00:04: >[mem 0xe0000000-0xefffffff]
363 [    0.217069] pnp 00:04: >[io  0x0500-0x057f]
364 [    0.217071] pnp 00:04: >[io  0x04d0-0x04d1]
365 [    0.217073] pnp 00:04: >[io  0x0400-0x040f]
366 [    0.217162] system 00:04: >[io  0x0500-0x057f] has been reserved
367 [    0.217228] system 00:04: >[io  0x04d0-0x04d1] has been reserved
368 [    0.217292] system 00:04: >[io  0x0400-0x040f] has been reserved
369 [    0.217358] system 00:04: >[mem 0x1e000000-0x1fffffff] has been reserved
370 [    0.217424] system 00:04: >[mem 0xfec00000-0xfec000ff] could not be reserved
371 [    0.217490] system 00:04: >[mem 0xff000000-0xffffffff] has been reserved
372 [    0.217556] system 00:04: >[mem 0xfecc0000-0xfecc00ff] could not be reserved
373 [    0.217622] system 00:04: >[mem 0xe0000000-0xefffffff] has been reserved
374 [    0.217689] system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active)
375 [    0.217694] pnp: PnP ACPI: found 5 devices
376 [    0.217754] ACPI: ACPI bus type pnp unregistered
377 [    0.224334] pci 0000:00:02.0: >bridge window [io  0x1000-0x0fff] to [bus 02-02] add_size 1000
378 [    0.224343] pci 0000:00:02.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
379 [    0.224346] pci 0000:00:02.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 02-02] add_size 200000
380 [    0.224357] pci 0000:00:03.0: >bridge window [io  0x1000-0x0fff] to [bus 03-03] add_size 1000
381 [    0.224360] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
382 [    0.224364] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
383 [    0.224390] pci 0000:00:02.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
384 [    0.224393] pci 0000:00:02.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
385 [    0.224396] pci 0000:00:03.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
386 [    0.224399] pci 0000:00:03.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
387 [    0.224403] pci 0000:00:02.0: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
388 [    0.224406] pci 0000:00:03.0: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
389 [    0.224413] pci 0000:00:02.0: >BAR 14: can't assign mem (size 0x200000)
390 [    0.224481] pci 0000:00:02.0: >BAR 15: can't assign mem pref (size 0x200000)
391 [    0.224548] pci 0000:00:03.0: >BAR 14: can't assign mem (size 0x200000)
392 [    0.224613] pci 0000:00:03.0: >BAR 15: can't assign mem pref (size 0x200000)
393 [    0.224681] pci 0000:00:02.0: >BAR 13: can't assign io (size 0x1000)
394 [    0.224747] pci 0000:00:03.0: >BAR 13: can't assign io (size 0x1000)
395 [    0.224813] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
396 [    0.224880] pci 0000:00:01.0: >  bridge window [mem 0xf0000000-0xf10fffff]
397 [    0.224947] pci 0000:00:01.0: >  bridge window [mem 0xd0000000-0xdfffffff pref]
398 [    0.225026] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
399 [    0.225098] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
400 [    0.225172] pci 0000:00:13.0: >PCI bridge to [bus 04-04]
401 [    0.225237] pci 0000:00:13.0: >  bridge window [mem 0xf1100000-0xf11fffff]
402 [    0.225308] pci 0000:00:13.1: >PCI bridge to [bus 05-05]
403 [    0.225388] pci 0000:00:01.0: >setting latency timer to 64
404 [    0.225431] pci 0000:00:13.0: >setting latency timer to 64
405 [    0.225438] pci 0000:00:13.1: >setting latency timer to 64
406 [    0.225443] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
407 [    0.225446] pci_bus 0000:00: >resource 5 [io  0x0d00-0x1fff]
408 [    0.225448] pci_bus 0000:00: >resource 6 [mem 0xc0000000-0xdfffffff]
409 [    0.225451] pci_bus 0000:00: >resource 7 [mem 0xe0000000-0xf12fffff]
410 [    0.225454] pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
411 [    0.225457] pci_bus 0000:01: >resource 1 [mem 0xf0000000-0xf10fffff]
412 [    0.225460] pci_bus 0000:01: >resource 2 [mem 0xd0000000-0xdfffffff pref]
413 [    0.225463] pci_bus 0000:04: >resource 1 [mem 0xf1100000-0xf11fffff]
414 [    0.225466] pci_bus 0000:05: >resource 4 [io  0x0000-0x0cf7]
415 [    0.225469] pci_bus 0000:05: >resource 5 [io  0x0d00-0x1fff]
416 [    0.225471] pci_bus 0000:05: >resource 6 [mem 0xc0000000-0xdfffffff]
417 [    0.225474] pci_bus 0000:05: >resource 7 [mem 0xe0000000-0xf12fffff]
418 [    0.225477] pci_bus 0000:05: >resource 8 [mem 0x000a0000-0x000bffff]
419 [    0.225532] NET: Registered protocol family 2
420 [    0.225679] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
421 [    0.225921] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
422 [    0.226205] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
423 [    0.226438] TCP: Hash tables configured (established 16384 bind 16384)
424 [    0.226503] TCP: reno registered
425 [    0.226567] UDP hash table entries: 256 (order: 1, 8192 bytes)
426 [    0.226637] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
427 [    0.226792] NET: Registered protocol family 1
428 [    0.226874] pci 0000:00:00.0: >MSI quirk detected; MSI disabled
429 [    0.226968] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
430 [    0.227035] pci 0000:00:02.0: >MSI quirk detected; subordinate MSI disabled
431 [    0.227313] pci 0000:01:00.0: >Boot video device
432 [    0.227321] PCI: CLS 64 bytes, default 64
433 [    0.227373] agpgart-amd64 0000:00:00.0: >AGP bridge [1106/0336]
434 [    0.227444] agpgart-amd64 0000:00:00.0: >aperture from AGP @ c0000000 size 256 MB
435 [    0.239416] agpgart-amd64 0000:00:00.0: >AGP aperture is 256M @ 0xc0000000
436 [    0.239601] platform rtc_cmos: >registered platform RTC device (no PNP device found)
437 [    0.240065] audit: initializing netlink socket (disabled)
438 [    0.240143] type=2000 audit(1388783952.236:1): initialized
439 [    0.266352] HugeTLB registered 2 MB page size, pre-allocated 0 pages
440 [    0.268311] VFS: Disk quotas dquot_6.5.2
441 [    0.268431] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
442 [    0.269163] fuse init (API version 7.19)
443 [    0.269321] msgmni has been set to 880
444 [    0.269817] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
445 [    0.269925] io scheduler noop registered
446 [    0.269986] io scheduler deadline registered (default)
447 [    0.270085] io scheduler cfq registered
448 [    0.270551] ioapic: probe of 0000:00:00.5 failed with error -22
449 [    0.270625] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
450 [    0.270710] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
451 [    0.270924] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
452 [    0.271005] ACPI: Power Button [PWRF]
453 [    0.271650] GHES: HEST is not enabled!
454 [    0.271802] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
455 [    0.292264] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
456 [    0.293621] Linux agpgart interface v0.103
457 [    0.295352] brd: module loaded
458 [    0.296309] loop: module loaded
459 [    0.297128] Fixed MDIO Bus: probed
460 [    0.297247] tun: Universal TUN/TAP device driver, 1.6
461 [    0.297309] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
462 [    0.297425] PPP generic driver version 2.4.2
463 [    0.297544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
464 [    0.297657] ehci_hcd 0000:00:10.4: >EHCI Host Controller
465 [    0.297728] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1
466 [    0.297839] ehci_hcd 0000:00:10.4: >debug port 1
467 [    0.297949] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xf1200000
468 [    0.308030] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00
469 [    0.308126] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
470 [    0.308192] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
471 [    0.308267] usb usb1: >Product: EHCI Host Controller
472 [    0.308330] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
473 [    0.308395] usb usb1: >SerialNumber: 0000:00:10.4
474 [    0.308589] hub 1-0:1.0: >USB hub found
475 [    0.308661] hub 1-0:1.0: >8 ports detected
476 [    0.308847] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
477 [    0.308931] uhci_hcd: USB Universal Host Controller Interface driver
478 [    0.309024] uhci_hcd 0000:00:10.0: >UHCI Host Controller
479 [    0.309093] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2
480 [    0.309215] uhci_hcd 0000:00:10.0: >irq 20, io base 0x00001800
481 [    0.309324] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
482 [    0.309390] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
483 [    0.309465] usb usb2: >Product: UHCI Host Controller
484 [    0.309528] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
485 [    0.309592] usb usb2: >SerialNumber: 0000:00:10.0
486 [    0.309768] hub 2-0:1.0: >USB hub found
487 [    0.309833] hub 2-0:1.0: >2 ports detected
488 [    0.309993] uhci_hcd 0000:00:10.1: >UHCI Host Controller
489 [    0.310061] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3
490 [    0.310183] uhci_hcd 0000:00:10.1: >irq 22, io base 0x00001820
491 [    0.310291] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
492 [    0.310357] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
493 [    0.310432] usb usb3: >Product: UHCI Host Controller
494 [    0.310494] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
495 [    0.310559] usb usb3: >SerialNumber: 0000:00:10.1
496 [    0.310728] hub 3-0:1.0: >USB hub found
497 [    0.310793] hub 3-0:1.0: >2 ports detected
498 [    0.310942] uhci_hcd 0000:00:10.2: >UHCI Host Controller
499 [    0.311012] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4
500 [    0.311110] uhci_hcd 0000:00:10.2: >irq 21, io base 0x00001840
501 [    0.311220] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
502 [    0.311285] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
503 [    0.311360] usb usb4: >Product: UHCI Host Controller
504 [    0.311423] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
505 [    0.311487] usb usb4: >SerialNumber: 0000:00:10.2
506 [    0.311646] hub 4-0:1.0: >USB hub found
507 [    0.311710] hub 4-0:1.0: >2 ports detected
508 [    0.311866] uhci_hcd 0000:00:10.3: >UHCI Host Controller
509 [    0.311934] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5
510 [    0.312085] uhci_hcd 0000:00:10.3: >irq 23, io base 0x00001860
511 [    0.312189] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
512 [    0.312255] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
513 [    0.312329] usb usb5: >Product: UHCI Host Controller
514 [    0.312392] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
515 [    0.312457] usb usb5: >SerialNumber: 0000:00:10.3
516 [    0.312618] hub 5-0:1.0: >USB hub found
517 [    0.312683] hub 5-0:1.0: >2 ports detected
518 [    0.312903] usbcore: registered new interface driver libusual
519 [    0.313002] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
520 [    0.313600] serio: i8042 KBD port at 0x60,0x64 irq 1
521 [    0.313669] serio: i8042 AUX port at 0x60,0x64 irq 12
522 [    0.313859] mousedev: PS/2 mouse device common for all mice
523 [    0.314035] rtc_cmos rtc_cmos: >RTC can wake from S4
524 [    0.314289] rtc_cmos rtc_cmos: >rtc core: registered rtc_cmos as rtc0
525 [    0.314407] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
526 [    0.314569] device-mapper: uevent: version 1.0.3
527 [    0.314700] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
528 [    0.315704] cpuidle: using governor ladder
529 [    0.315765] cpuidle: using governor menu
530 [    0.315826] EFI Variables Facility v0.08 2004-May-17
531 [    0.316187] ashmem: initialized
532 [    0.316394] TCP: cubic registered
533 [    0.316573] NET: Registered protocol family 10
534 [    0.316895] NET: Registered protocol family 17
535 [    0.316976] Key type dns_resolver registered
536 [    0.317205] PM: Hibernation image not present or could not be loaded.
537 [    0.317224] registered taskstats version 1
538 [    0.339773] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
539 [    0.501133] Freeing initrd memory: 14876k freed
540 [    0.514266] Key type trusted registered
541 [    0.517562] Key type encrypted registered
542 [    0.521235]   Magic number: 14:691:347
543 [    0.521374]  pci0000:00: >hash matches
544 [    0.521499] rtc_cmos rtc_cmos: >setting system clock to 2014-01-03 21:19:12 UTC (1388783952)
545 [    0.521653] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ (2 cpu cores) (version 2.20.00)
546 [    0.521803] powernow-k8: fid 0xd (2100 MHz), vid 0xa
547 [    0.521866] powernow-k8: fid 0xc (2000 MHz), vid 0xc
548 [    0.521928] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
549 [    0.522040] powernow-k8: ph2 null fid transition 0xd
550 [    0.522154] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
551 [    0.522218] EDD information not available.
552 [    0.524226] Freeing unused kernel memory: 928k freed
553 [    0.524861] Write protecting the kernel read-only data: 12288k
554 [    0.530505] Freeing unused kernel memory: 1472k freed
555 [    0.535711] Freeing unused kernel memory: 1124k freed
556 [    0.565369] udevd[86]: starting version 175
557 [    0.624641] sata_via 0000:00:0f.0: >version 2.6
558 [    0.624703] sata_via 0000:00:0f.0: >routed to hard irq line 0
559 [    0.627804] scsi0 : sata_via
560 [    0.629887] scsi1 : sata_via
561 [    0.630048] ata1: SATA max UDMA/133 cmd 0x18a0 ctl 0x18b0 bmdma 0x1880 irq 21
562 [    0.630114] ata2: SATA max UDMA/133 cmd 0x18a8 ctl 0x18b4 bmdma 0x1888 irq 21
563 [    0.654947] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
564 [    0.661924] pata_via 0000:00:0f.1: >version 0.3.4
565 [    0.664123] scsi2 : pata_via
566 [    0.664650] scsi3 : pata_via
567 [    0.664779] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
568 [    0.664846] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
569 [    0.665295] via-rhine 0000:00:12.0: >eth0: VIA Rhine II at 0xf1200100, 00:00:de:ad:be:ef, IRQ 23
570 [    0.666154] via-rhine 0000:00:12.0: >eth0: MII PHY found at address 1, status 0x796d advertising 0de1 Link c5e1
571 [    0.682745] Floppy drive(s): fd0 is 1.44M
572 [    0.700040] FDC 0 is a post-1991 82077
573 [    0.832024] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
574 [    1.044020] ata2: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
575 [    1.229274] ata2.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
576 [    1.229340] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
577 [    1.237144] ata2.00: configured for UDMA/133
578 [    1.237413] scsi 1:0:0:0: >Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
579 [    1.237703] sd 1:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
580 [    1.237746] sd 1:0:0:0: >Attached scsi generic sg0 type 0
581 [    1.237893] sd 1:0:0:0: >[sda] Write Protect is off
582 [    1.237966] sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
583 [    1.238004] sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
584 [    1.294221]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
585 [    1.294859] sd 1:0:0:0: >[sda] Attached SCSI disk
586 [    1.908782] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
587 [    1.908858] EXT4-fs (sda7): write access will be enabled during recovery
588 [    2.273419] EXT4-fs (sda7): recovery complete
589 [    2.280667] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
590 [    3.652333] udevd[300]: starting version 175
591 [    4.695084] microcode: AMD CPU family 0xf not supported
592 [    4.746637] k8temp 0000:00:18.3: >Temperature readouts might be wrong - check erratum #141
593 [    4.785332] MCE: In-kernel MCE decoding enabled.
594 [    4.835172] EDAC MC: Ver: 2.1.0
595 [    4.840657] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
596 [    4.850627] AMD64 EDAC driver v3.4.0
597 [    4.850770] EDAC amd64: DRAM ECC disabled.
598 [    4.850851] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
599 [    4.850851]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
600 [    4.850851]  (Note that use of the override may cause unknown side effects.)
601 [    5.055090] kvm: Nested Virtualization enabled
602 [    5.220769] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
603 [    5.501183] snd_hda_intel 0000:04:01.0: >PCI: Disallowing DAC for device
604 [    5.551594] hda_codec: ALC662 rev1: SKU not ready 0x411111f0
605 [    5.559404] input: HDA VIA VT82xx Line as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input2
606 [    5.559604] input: HDA VIA VT82xx Front Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input3
607 [    5.559722] input: HDA VIA VT82xx Rear Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input4
608 [    5.559787] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input5
609 [    5.559854] input: HDA VIA VT82xx Line Out CLFE as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input6
610 [    5.559917] input: HDA VIA VT82xx Line Out Surround as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input7
611 [    5.560029] input: HDA VIA VT82xx Line Out Front as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input8
612 [   16.820429] it87: Found IT8712F chip at 0x290, revision 8
613 [   16.820565] it87 it87.656: >Detected broken BIOS defaults, disabling PWM interface
614 [   26.064442] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
615 [   86.810847] PM: Syncing filesystems ... done.
616 [   86.866494] PM: Preparing system for mem sleep
617 [   86.868575] Freezing user space processes ... (elapsed 0.01 seconds) done.
618 [   86.884038] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
619 [   86.900030] PM: Entering mem sleep
620 [   86.900044] Suspending console(s) (use no_console_suspend to debug)
621 [   86.900418] sd 1:0:0:0: >[sda] Synchronizing SCSI cache
622 [   86.901253] sd 1:0:0:0: >[sda] Stopping disk
623 [   86.906277] ACPI handle has no context!
624 [   86.920020] agpgart-amd64 0000:00:00.0: >Refused to change power state, currently in D0
625 [   87.108273] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
626 [   87.108291] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
627 [   87.108311] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
628 [   87.108332] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
629 [   87.108353] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
630 [   87.108374] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
631 [   87.108395] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
632 [   87.108416] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
633 [   87.108437] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
634 [   87.108457] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
635 [   87.108478] hda-intel: spurious response 0x80051f17:0x0, last cmd=0x1e70700
636 [   87.108499] hda-intel: spurious response 0x270300:0x0, last cmd=0x1e70700
637 [   87.108520] hda-intel: spurious response 0x270300:0x0, last cmd=0x1e70700
638 [   87.108541] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
639 [   87.108561] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
640 [   87.108582] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
641 [   87.108603] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
642 [   87.108624] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
643 [   87.108645] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
644 [   87.108665] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
645 [   87.108686] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
646 [   87.108707] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
647 [   87.108728] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
648 [   87.108749] hda-intel: spurious response 0x11:0x0, last cmd=0x1e70700
649 [   87.108770] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
650 [   87.108791] hda-intel: spurious response 0x11:0x0, last cmd=0x1e70700
651 [   87.108812] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
652 [   87.108832] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
653 [   87.108853] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
654 [   87.108874] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
655 [   87.108895] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
656 [   87.108915] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
657 [   87.108936] hda-intel: spurious response 0x80:0x0, last cmd=0x1e70700
658 [   87.108957] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
659 [   87.108978] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
660 [   87.108999] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
661 [   87.109020] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
662 [   87.109040] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
663 [   87.109061] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
664 [   87.109082] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
665 [   87.109103] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
666 [   87.109124] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
667 [   87.109145] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
668 [   87.109166] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
669 [   87.109187] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
670 [   87.109208] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
671 [   87.109228] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
672 [   87.109249] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
673 [   87.109270] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
674 [   87.109290] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
675 [   87.109311] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
676 [   87.109332] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
677 [   87.109353] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
678 [   87.109374] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
679 [   87.109395] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
680 [   87.109416] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
681 [   87.109437] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
682 [   87.109457] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
683 [   87.109478] hda-intel: spurious response 0x0:0x0, last cmd=0x1e70700
684 [   87.212115] ACPI handle has no context!
685 [   87.228018] PM: suspend of drv:snd_hda_intel dev:0000:04:01.0 complete after 322.263 msecs
686 [   87.228033] PM: suspend of drv:pci dev:0000:00:13.0 complete after 322.203 msecs
687 [   87.442939] PM: suspend of drv:sd dev:1:0:0:0 complete after 542.531 msecs
688 [   87.442957] PM: suspend of drv:scsi dev:target1:0:0 complete after 542.548 msecs
689 [   87.442971] PM: suspend of drv:scsi dev:host1 complete after 542.402 msecs
690 [   87.443017] PM: suspend of drv: dev:ata2 complete after 542.436 msecs
691 [   87.443061] PM: suspend of drv:sata_via dev:0000:00:0f.0 complete after 536.922 msecs
692 [   87.443080] PM: suspend of drv: dev:pci0000:00 complete after 536.842 msecs
693 [   87.443094] PM: suspend of devices complete after 542.846 msecs
694 [   87.443096] PM: suspend devices took 0.540 seconds
695 [   87.443249] PM: late suspend of devices complete after 0.150 msecs
696 [   87.536234] PM: noirq suspend of devices complete after 92.982 msecs
697 [   87.536354] ACPI: Preparing to enter system sleep state S3
698 [   87.536471] PM: Saving platform NVS memory
699 [   87.536473] Disabling non-boot CPUs ...
700 [   87.640015] CPU 1 is now offline
701 [   87.640525] Extended CMOS year: 2000
702 [   87.640525] ACPI: Low-level resume complete
703 [   87.640525] PM: Restoring platform NVS memory
704 [   87.640525] Extended CMOS year: 2000
705 [   87.640525] Enabling non-boot CPUs ...
706 [   87.640593] powernow-k8: ph2 null fid transition 0xd
707 [   87.640740] Booting Node 0 Processor 1 APIC 0x1
708 [   87.656098] CPU1 is up
709 [   87.656508] ACPI: Waking up from system sleep state S3
710 [   87.736675] PM: noirq resume of devices complete after 80.073 msecs
711 [   87.736818] PM: early resume of devices complete after 0.049 msecs
712 [   87.736911] pci 0000:00:01.0: >setting latency timer to 64
713 [   87.736990] usb usb2: >root hub lost power or was reset
714 [   87.737023] usb usb3: >root hub lost power or was reset
715 [   87.737050] usb usb4: >root hub lost power or was reset
716 [   87.737057] usb usb5: >root hub lost power or was reset
717 [   87.737109] pci 0000:00:13.0: >setting latency timer to 64
718 [   87.737120] pci 0000:00:13.1: >setting latency timer to 64
719 [   87.892102] PM: resume of drv:scsi dev:host3 complete after 153.253 msecs
720 [   87.892112] PM: resume of drv:scsi_host dev:host3 complete after 153.223 msecs
721 [   87.892188] PM: resume of drv:scsi dev:host2 complete after 153.562 msecs
722 [   87.892195] PM: resume of drv:scsi_host dev:host2 complete after 153.400 msecs
723 [   87.902774] PM: resume of drv:ata_port dev:ata1 complete after 164.912 msecs
724 [   87.902796] PM: resume of drv:scsi dev:host0 complete after 164.462 msecs
725 [   87.902811] PM: resume of drv:scsi_host dev:host0 complete after 164.456 msecs
726 [   87.920475] ata2.00: configured for UDMA/133
727 [   87.920502] PM: resume of drv:scsi dev:host1 complete after 182.117 msecs
728 [   87.920512] PM: resume of drv:scsi dev:target1:0:0 complete after 181.570 msecs
729 [   87.920518] PM: resume of drv:sd dev:1:0:0:0 complete after 181.527 msecs
730 [   87.920525] sd 1:0:0:0: >[sda] Starting disk
731 [   87.920536] PM: resume of drv:scsi_host dev:host1 complete after 182.109 msecs
732 [   87.930067] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 191.023 msecs
733 [   87.960037] PM: resume of drv:hub dev:5-0:1.0 complete after 222.026 msecs
734 [   87.960046] PM: resume of drv: dev:ep_00 complete after 221.914 msecs
735 [   87.960053] PM: resume of drv: dev:ep_00 complete after 222.062 msecs
736 [   87.960059] PM: resume of drv: dev:ep_81 complete after 221.971 msecs
737 [   87.960062] PM: resume of drv:hub dev:4-0:1.0 complete after 222.085 msecs
738 [   87.960066] PM: resume of drv:hub dev:3-0:1.0 complete after 222.136 msecs
739 [   87.960071] PM: resume of drv: dev:ep_00 complete after 222.112 msecs
740 [   87.960076] PM: resume of drv: dev:ep_81 complete after 222.089 msecs
741 [   87.960078] PM: resume of drv:hub dev:2-0:1.0 complete after 222.189 msecs
742 [   87.960083] PM: resume of drv: dev:ep_81 complete after 222.142 msecs
743 [   87.960088] PM: resume of drv: dev:ep_00 complete after 222.175 msecs
744 [   87.960092] PM: resume of drv: dev:ep_81 complete after 222.196 msecs
745 [   90.928018] 
746 [   90.928019] floppy driver state
747 [   90.928020] -------------------
748 [   90.928035] now=4294915028 last interrupt=4294892471 diff=22557 last called handler=reset_interrupt [floppy]
749 [   90.928036] timeout_message=lock fdc
750 [   90.928036] last output bytes:
751 [   90.928037]  8 80 4294892467
752 [   90.928038]  8 80 4294892467
753 [   90.928039]  8 80 4294892467
754 [   90.928040]  8 80 4294892470
755 [   90.928041]  8 80 4294892470
756 [   90.928042]  8 80 4294892470
757 [   90.928043]  8 80 4294892470
758 [   90.928043]  e 80 4294892470
759 [   90.928044] 13 80 4294892470
760 [   90.928045]  0 90 4294892470
761 [   90.928046] 1a 90 4294892470
762 [   90.928047]  0 90 4294892470
763 [   90.928048] 12 90 4294892470
764 [   90.928049]  0 90 4294892470
765 [   90.928049] 14 90 4294892470
766 [   90.928050] 18 80 4294892470
767 [   90.928051]  8 80 4294892471
768 [   90.928052]  8 80 4294892471
769 [   90.928053]  8 80 4294892471
770 [   90.928054]  8 80 4294892471
771 [   90.928054] last result at 4294892471
772 [   90.928055] last redo_fd_request at 4294892471
773 [   90.928066] status=0
774 [   90.928067] fdc_busy=1
775 [   90.928070] do_floppy=reset_interrupt [floppy]
776 [   90.928071] cont=ffffffffa0028ec0
777 [   90.928071] current_req=          (null)
778 [   90.928072] command_status=-1
779 [   90.928072] 
780 [   90.928076] floppy0: floppy timeout called
781 [   90.928237] PM: resume of devices complete after 3191.414 msecs
782 [   90.928400] PM: resume devices took 3.192 seconds
783 [   90.928502] PM: Finishing wakeup.
784 [   90.928504] Restarting tasks ... done.
785 [  212.160232] Program cbmem tried to access /dev/mem between f0000->1f0000.