google/parrot/4.0-6919-g85620db/2014-09-13T00:21:02Z
[board-status.git] / asus / f2a85-m / 4.0-5901-g60ec2ff / 2014-05-05T06:59:05Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
4 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
5 [    0.000000] KERNEL supported cpus:
6 [    0.000000]   Intel GenuineIntel
7 [    0.000000]   AMD AuthenticAMD
8 [    0.000000]   Centaur CentaurHauls
9 [    0.000000] e820: BIOS-provided physical RAM map:
10 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11 [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12 [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf12ffff] usable
14 [    0.000000] BIOS-e820: [mem 0x00000000bf130000-0x00000000dfffffff] reserved
15 [    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
16 [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
17 [    0.000000] NX (Execute Disable) protection: active
18 [    0.000000] DMI present.
19 [    0.000000] DMI: ASUS F2A85-M/F2A85-M, BIOS 4.0-5901-g60ec2ff 05/05/2014
20 [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
21 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
22 [    0.000000] No AGP bridge found
23 [    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
24 [    0.000000] MTRR default type: uncachable
25 [    0.000000] MTRR fixed ranges enabled:
26 [    0.000000]   00000-9FFFF write-back
27 [    0.000000]   A0000-BFFFF uncachable
28 [    0.000000]   C0000-FFFFF write-back
29 [    0.000000] MTRR variable ranges enabled:
30 [    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
31 [    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
32 [    0.000000]   2 disabled
33 [    0.000000]   3 disabled
34 [    0.000000]   4 disabled
35 [    0.000000]   5 disabled
36 [    0.000000]   6 base 0000FF800000 mask FFFFFF800000 write-protect
37 [    0.000000]   7 disabled
38 [    0.000000] TOM2: 000000021f000000 aka 8688M
39 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
40 [    0.000000] e820: last_pfn = 0xbf130 max_arch_pfn = 0x400000000
41 [    0.000000] found SMP MP-table at [mem 0x000fd9a0-0x000fd9af] mapped at [ffff8800000fd9a0]
42 [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
43 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
44 [    0.000000] Using GB pages for direct mapping
45 [    0.000000] init_memory_mapping: [mem 0x00000000-0xbf12ffff]
46 [    0.000000]  [mem 0x00000000-0x7fffffff] page 1G
47 [    0.000000]  [mem 0x80000000-0xbeffffff] page 2M
48 [    0.000000]  [mem 0xbf000000-0xbf12ffff] page 4k
49 [    0.000000] kernel direct mapping tables up to 0xbf12ffff @ [mem 0x1fffd000-0x1fffffff]
50 [    0.000000] init_memory_mapping: [mem 0x100000000-0x21effffff]
51 [    0.000000]  [mem 0x100000000-0x1ffffffff] page 1G
52 [    0.000000]  [mem 0x200000000-0x21effffff] page 2M
53 [    0.000000] kernel direct mapping tables up to 0x21effffff @ [mem 0xbf12e000-0xbf12ffff]
54 [    0.000000] RAMDISK: [mem 0x362e2000-0x37168fff]
55 [    0.000000] ACPI: RSDP 00000000000fd980 00014 (v00 CORE  )
56 [    0.000000] ACPI: RSDT 00000000bf132424 00040 (v01 CORE   COREBOOT 00000000 CORE 00000000)
57 [    0.000000] ACPI: FACP 00000000bf133d88 000F4 (v04 CORE   COREBOOT 00000000 CORE 00000000)
58 [    0.000000] ACPI: DSDT 00000000bf1324c8 0187C (v02 ASUS   COREBOOT 00010001 INTL 20130626)
59 [    0.000000] ACPI: FACS 00000000bf133d48 00040
60 [    0.000000] ACPI: HPET 00000000bf133e80 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
61 [    0.000000] ACPI: APIC 00000000bf133eb8 00072 (v01 CORE   COREBOOT 00000000 CORE 00000000)
62 [    0.000000] ACPI: HEST 00000000bf133f30 001D0 (v01 CORE   COREBOOT 00000000 CORE 00000000)
63 [    0.000000] ACPI: SSDT 00000000bf134100 0051F (v02    AMD     ALIB 00000001 MSFT 04000000)
64 [    0.000000] ACPI: SSDT 00000000bf134620 00D40 (v01 AMD    POWERNOW 00000001 AMD  00000001)
65 [    0.000000] ACPI: SSDT 00000000bf135360 00045 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
66 [    0.000000] ACPI: Local APIC address 0xfee00000
67 [    0.000000] No NUMA configuration found
68 [    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
69 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
70 [    0.000000]   NODE_DATA [mem 0x21effc000-0x21effffff]
71 [    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216e00000-ffff88021e5fffff] on node 0
72 [    0.000000] Zone ranges:
73 [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
74 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
75 [    0.000000]   Normal   [mem 0x100000000-0x21effffff]
76 [    0.000000] Movable zone start for each node
77 [    0.000000] Early memory node ranges
78 [    0.000000]   node   0: [mem 0x00010000-0x0009efff]
79 [    0.000000]   node   0: [mem 0x00100000-0xbf12ffff]
80 [    0.000000]   node   0: [mem 0x100000000-0x21effffff]
81 [    0.000000] On node 0 totalpages: 1958079
82 [    0.000000]   DMA zone: 64 pages used for memmap
83 [    0.000000]   DMA zone: 6 pages reserved
84 [    0.000000]   DMA zone: 3913 pages, LIFO batch:0
85 [    0.000000]   DMA32 zone: 16320 pages used for memmap
86 [    0.000000]   DMA32 zone: 762224 pages, LIFO batch:31
87 [    0.000000]   Normal zone: 18368 pages used for memmap
88 [    0.000000]   Normal zone: 1157184 pages, LIFO batch:31
89 [    0.000000] ACPI: PM-Timer IO Port: 0x818
90 [    0.000000] ACPI: Local APIC address 0xfee00000
91 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled)
92 [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled)
93 [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled)
94 [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled)
95 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
96 [    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
97 [    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
98 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
99 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
100 [    0.000000] ACPI: IRQ0 used by override.
101 [    0.000000] ACPI: IRQ2 used by override.
102 [    0.000000] ACPI: IRQ9 used by override.
103 [    0.000000] Using ACPI (MADT) for SMP configuration information
104 [    0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
105 [    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
106 [    0.000000] nr_irqs_gsi: 40
107 [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
108 [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
109 [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
110 [    0.000000] PM: Registered nosave memory: 00000000bf130000 - 00000000e0000000
111 [    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
112 [    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
113 [    0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000
114 [    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
115 [    0.000000] Booting paravirtualized kernel on bare hardware
116 [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
117 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u524288
118 [    0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152
119 [    0.000000] pcpu-alloc: [0] 0 1 2 3 
120 [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1923321
121 [    0.000000] Policy zone: Normal
122 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
123 [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
124 [    0.000000] __ex_table already sorted, skipping sort
125 [    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
126 [    0.000000] Checking aperture...
127 [    0.000000] No AGP bridge found
128 [    0.000000] Calgary: detecting Calgary via BIOS EBDA area
129 [    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
130 [    0.000000] Memory: 7612212k/8896512k available (6711k kernel code, 1064196k absent, 220104k reserved, 6459k data, 928k init)
131 [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
132 [    0.000000] Hierarchical RCU implementation.
133 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
134 [    0.000000] NR_IRQS:16640 nr_irqs:712 16
135 [    0.000000] spurious 8259A interrupt: IRQ7.
136 [    0.000000] Console: colour VGA+ 80x25
137 [    0.000000] console [ttyS0] enabled
138 [    0.000000] allocated 31457280 bytes of page_cgroup
139 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
140 [    0.000000] hpet clockevent registered
141 [    0.000000] Fast TSC calibration using PIT
142 [    0.004000] Detected 3793.213 MHz processor.
143 [    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7586.42 BogoMIPS (lpj=15172852)
144 [    0.010669] pid_max: default: 32768 minimum: 301
145 [    0.015286] Security Framework initialized
146 [    0.019379] AppArmor: AppArmor initialized
147 [    0.023462] Yama: becoming mindful.
148 [    0.027432] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
149 [    0.036709] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
150 [    0.044712] Mount-cache hash table entries: 256
151 [    0.049386] Initializing cgroup subsys cpuacct
152 [    0.053822] Initializing cgroup subsys memory
153 [    0.058169] Initializing cgroup subsys devices
154 [    0.062600] Initializing cgroup subsys freezer
155 [    0.067029] Initializing cgroup subsys blkio
156 [    0.071288] Initializing cgroup subsys perf_event
157 [    0.075996] tseg: 0000000000
158 [    0.076006] CPU: Physical Processor ID: 0
159 [    0.080000] CPU: Processor Core ID: 0
160 [    0.083654] mce: CPU supports 7 MCE banks
161 [    0.088985] ACPI: Core revision 20120320
162 [    0.093894] ftrace: allocating 25118 entries in 99 pages
163 [    0.107003] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
164 [    0.152362] CPU0: AMD A10-5800K APU with Radeon(tm) HD Graphics   stepping 01
165 [    0.265924] Performance Events: AMD Family 15h PMU driver.
166 [    0.271401] ... version:                0
167 [    0.275390] ... bit width:              48
168 [    0.279466] ... generic registers:      6
169 [    0.283454] ... value mask:             0000ffffffffffff
170 [    0.288741] ... max period:             00007fffffffffff
171 [    0.294024] ... fixed-purpose events:   0
172 [    0.298016] ... event mask:             000000000000003f
173 [    0.303413] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
174 [    0.311452] Booting Node   0, Processors  #1 #2 #3 Ok.
175 [    0.355730] Brought up 4 CPUs
176 [    0.358690] Total of 4 processors activated (30345.70 BogoMIPS).
177 [    0.365467] devtmpfs: initialized
178 [    0.369985] EVM: security.selinux
179 [    0.373283] EVM: security.SMACK64
180 [    0.376584] EVM: security.capability
181 [    0.380880] dummy: 
182 [    0.382995] RTC time: 20:40:38, date: 05/05/14
183 [    0.387448] NET: Registered protocol family 16
184 [    0.392053] Trying to unpack rootfs image as initramfs...
185 [    0.397472] ACPI: bus type pci registered
186 [    0.401501] PCI: Using configuration type 1 for base access
187 [    0.407050] PCI: Using configuration type 1 for extended access
188 [    0.413869] bio: create slab <bio-0> at 0
189 [    0.417942] ACPI: Added _OSI(Module Device)
190 [    0.422112] ACPI: Added _OSI(Processor Device)
191 [    0.426541] ACPI: Added _OSI(3.0 _SCP Extensions)
192 [    0.431224] ACPI: Added _OSI(Processor Aggregator Device)
193 [    0.437048] ACPI: EC: Look up EC in DSDT
194 [    0.437540] ACPI: Executed 1 blocks of module-level executable AML code
195 [    0.446371] ACPI: Interpreter enabled
196 [    0.450022] ACPI: (supports S0 S1 S2 S3 S4 S5)
197 [    0.454573] ACPI: BIOS offers _BFS
198 [    0.457956] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org
199 [    0.466265] ACPI: Using IOAPIC for interrupt routing
200 [    0.472862] ACPI: No dock devices found.
201 [    0.476769] HEST: Table parsing has been initialized.
202 [    0.481803] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
203 [    0.490963] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
204 [    0.497180] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
205 [    0.503851] pci_root PNP0A03:00: >host bridge window [io  0x03b0-0x03df]
206 [    0.510526] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0xffff]
207 [    0.517199] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
208 [    0.524557] pci_root PNP0A03:00: >host bridge window [mem 0x000c0000-0x000dffff]
209 [    0.531916] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xffffffff]
210 [    0.539282] pci_root PNP0A03:00: >host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x03b0-0x03df] ignored
211 [    0.549511] PCI host bridge to bus 0000:00
212 [    0.553592] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
213 [    0.559834] pci_bus 0000:00: >root bus resource [io  0x0d00-0xffff]
214 [    0.566070] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
215 [    0.573005] pci_bus 0000:00: >root bus resource [mem 0x000c0000-0x000dffff]
216 [    0.579940] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xffffffff]
217 [    0.586879] pci 0000:00:00.0: >[1022:1410] type 00 class 0x060000
218 [    0.586915] pci 0000:00:01.0: >[1002:9901] type 00 class 0x030000
219 [    0.586922] pci 0000:00:01.0: >reg 10: [mem 0xe0000000-0xefffffff pref]
220 [    0.586927] pci 0000:00:01.0: >reg 14: [io  0x3000-0x30ff]
221 [    0.586931] pci 0000:00:01.0: >reg 18: [mem 0xf0200000-0xf023ffff]
222 [    0.586965] pci 0000:00:01.0: >supports D1 D2
223 [    0.586981] pci 0000:00:01.1: >[1002:9902] type 00 class 0x040300
224 [    0.586987] pci 0000:00:01.1: >reg 10: [mem 0xf0240000-0xf0243fff]
225 [    0.587024] pci 0000:00:01.1: >supports D1 D2
226 [    0.587064] pci 0000:00:10.0: >[1022:7812] type 00 class 0x0c0330
227 [    0.587068] Freeing initrd memory: 14876k freed
228 [    0.591596] pci 0000:00:10.0: >reg 10: [mem 0xf0248000-0xf0249fff 64bit]
229 [    0.591684] pci 0000:00:10.0: >PME# supported from D0 D3hot D3cold
230 [    0.591719] pci 0000:00:10.1: >[1022:7812] type 00 class 0x0c0330
231 [    0.591736] pci 0000:00:10.1: >reg 10: [mem 0xf024a000-0xf024bfff 64bit]
232 [    0.591823] pci 0000:00:10.1: >PME# supported from D0 D3hot D3cold
233 [    0.591854] pci 0000:00:11.0: >[1022:7801] type 00 class 0x010601
234 [    0.591867] pci 0000:00:11.0: >reg 10: [io  0x3410-0x3417]
235 [    0.591875] pci 0000:00:11.0: >reg 14: [io  0x3420-0x3423]
236 [    0.591882] pci 0000:00:11.0: >reg 18: [io  0x3418-0x341f]
237 [    0.591890] pci 0000:00:11.0: >reg 1c: [io  0x3424-0x3427]
238 [    0.591897] pci 0000:00:11.0: >reg 20: [io  0x3400-0x340f]
239 [    0.591904] pci 0000:00:11.0: >reg 24: [mem 0xf024f000-0xf024f7ff]
240 [    0.591941] pci 0000:00:12.0: >[1022:7807] type 00 class 0x0c0310
241 [    0.591952] pci 0000:00:12.0: >reg 10: [mem 0xf024c000-0xf024cfff]
242 [    0.592008] pci 0000:00:12.2: >[1022:7808] type 00 class 0x0c0320
243 [    0.592023] pci 0000:00:12.2: >reg 10: [mem 0xf024f800-0xf024f8ff]
244 [    0.592089] pci 0000:00:12.2: >supports D1 D2
245 [    0.592090] pci 0000:00:12.2: >PME# supported from D0 D1 D2 D3hot
246 [    0.592109] pci 0000:00:13.0: >[1022:7807] type 00 class 0x0c0310
247 [    0.592119] pci 0000:00:13.0: >reg 10: [mem 0xf024d000-0xf024dfff]
248 [    0.592177] pci 0000:00:13.2: >[1022:7808] type 00 class 0x0c0320
249 [    0.592192] pci 0000:00:13.2: >reg 10: [mem 0xf024f900-0xf024f9ff]
250 [    0.592257] pci 0000:00:13.2: >supports D1 D2
251 [    0.592259] pci 0000:00:13.2: >PME# supported from D0 D1 D2 D3hot
252 [    0.592277] pci 0000:00:14.0: >[1022:780b] type 00 class 0x0c0500
253 [    0.592338] pci 0000:00:14.2: >[1022:780d] type 00 class 0x040300
254 [    0.592354] pci 0000:00:14.2: >reg 10: [mem 0xf0244000-0xf0247fff 64bit]
255 [    0.592407] pci 0000:00:14.2: >PME# supported from D0 D3hot D3cold
256 [    0.592418] pci 0000:00:14.3: >[1022:780e] type 00 class 0x060100
257 [    0.592479] pci 0000:00:14.4: >[1022:780f] type 01 class 0x060401
258 [    0.592512] pci 0000:00:14.5: >[1022:7809] type 00 class 0x0c0310
259 [    0.592522] pci 0000:00:14.5: >reg 10: [mem 0xf024e000-0xf024efff]
260 [    0.592574] pci 0000:00:14.7: >[1022:7806] type 00 class 0x080501
261 [    0.592588] pci 0000:00:14.7: >reg 10: [mem 0xf024fa00-0xf024faff 64bit]
262 [    0.592637] pci 0000:00:15.0: >[1022:43a0] type 01 class 0x060400
263 [    0.592696] pci 0000:00:15.0: >supports D1 D2
264 [    0.592717] pci 0000:00:15.1: >[1022:43a1] type 01 class 0x060400
265 [    0.592776] pci 0000:00:15.1: >supports D1 D2
266 [    0.592798] pci 0000:00:18.0: >[1022:1400] type 00 class 0x060000
267 [    0.592813] pci 0000:00:18.1: >[1022:1401] type 00 class 0x060000
268 [    0.592827] pci 0000:00:18.2: >[1022:1402] type 00 class 0x060000
269 [    0.592842] pci 0000:00:18.3: >[1022:1403] type 00 class 0x060000
270 [    0.592860] pci 0000:00:18.4: >[1022:1404] type 00 class 0x060000
271 [    0.592873] pci 0000:00:18.5: >[1022:1405] type 00 class 0x060000
272 [    0.592943] pci 0000:00:14.4: >PCI bridge to [bus 01-01] (subtractive decode)
273 [    0.600048] pci 0000:00:14.4: >  bridge window [io  0x0000-0x0cf7] (subtractive decode)
274 [    0.600050] pci 0000:00:14.4: >  bridge window [io  0x0d00-0xffff] (subtractive decode)
275 [    0.600051] pci 0000:00:14.4: >  bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
276 [    0.600053] pci 0000:00:14.4: >  bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
277 [    0.600054] pci 0000:00:14.4: >  bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
278 [    0.600109] pci 0000:02:00.0: >[197b:2363] type 00 class 0x010601
279 [    0.600194] pci 0000:02:00.0: >reg 24: [mem 0xf0010000-0xf00101ff]
280 [    0.600207] pci 0000:02:00.0: >reg 30: [mem 0xf0000000-0xf000ffff pref]
281 [    0.600267] pci 0000:02:00.0: >PME# supported from D3hot
282 [    0.600308] pci 0000:02:00.1: >[197b:0368] type 00 class 0x010185
283 [    0.600326] pci 0000:02:00.1: >reg 10: [io  0x1010-0x1017]
284 [    0.600338] pci 0000:02:00.1: >reg 14: [io  0x1020-0x1023]
285 [    0.600351] pci 0000:02:00.1: >reg 18: [io  0x1018-0x101f]
286 [    0.600364] pci 0000:02:00.1: >reg 1c: [io  0x1024-0x1027]
287 [    0.600376] pci 0000:02:00.1: >reg 20: [io  0x1000-0x100f]
288 [    0.604793] pci 0000:00:15.0: >PCI bridge to [bus 02-02]
289 [    0.610092] pci 0000:00:15.0: >  bridge window [io  0x1000-0x1fff]
290 [    0.610095] pci 0000:00:15.0: >  bridge window [mem 0xf0000000-0xf00fffff]
291 [    0.610159] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
292 [    0.610176] pci 0000:03:00.0: >reg 10: [io  0x2000-0x20ff]
293 [    0.610203] pci 0000:03:00.0: >reg 18: [mem 0xf0104000-0xf0104fff 64bit pref]
294 [    0.610219] pci 0000:03:00.0: >reg 20: [mem 0xf0100000-0xf0103fff 64bit pref]
295 [    0.610294] pci 0000:03:00.0: >supports D1 D2
296 [    0.610296] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
297 [    0.616743] pci 0000:00:15.1: >PCI bridge to [bus 03-03]
298 [    0.622043] pci 0000:00:15.1: >  bridge window [io  0x2000-0x2fff]
299 [    0.622049] pci 0000:00:15.1: >  bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
300 [    0.622068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
301 [    0.622246] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
302 [    0.622272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR0._PRT]
303 [    0.622298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBR1._PRT]
304 [    0.622357]  pci0000:00: >Requesting ACPI _OSC control (0x1d)
305 [    0.628116]  pci0000:00: >ACPI _OSC control (0x1d) granted
306 [    0.637838] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0
307 [    0.644811] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0
308 [    0.651787] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0
309 [    0.658757] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0
310 [    0.665725] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0
311 [    0.672702] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0
312 [    0.677996] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
313 [    0.684967] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
314 [    0.691989] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
315 [    0.700051] vgaarb: loaded
316 [    0.702746] vgaarb: bridge control possible 0000:00:01.0
317 [    0.708173] SCSI subsystem initialized
318 [    0.712016] libata version 3.00 loaded.
319 [    0.712032] ACPI: bus type usb registered
320 [    0.716044] usbcore: registered new interface driver usbfs
321 [    0.721508] usbcore: registered new interface driver hub
322 [    0.726894] usbcore: registered new device driver usb
323 [    0.732068] PCI: Using ACPI for IRQ routing
324 [    0.736236] PCI: pci_cache_line_size set to 64 bytes
325 [    0.736309] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
326 [    0.736310] e820: reserve RAM buffer [mem 0xbf130000-0xbfffffff]
327 [    0.736312] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
328 [    0.736383] NetLabel: Initializing
329 [    0.739765] NetLabel:  domain hash size = 128
330 [    0.744102] NetLabel:  protocols = UNLABELED CIPSOv4
331 [    0.749051] NetLabel:  unlabeled traffic allowed by default
332 [    0.754639] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
333 [    0.759560] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
334 [    0.767373] Switching to clocksource hpet
335 [    0.777309] AppArmor: AppArmor Filesystem Enabled
336 [    0.782027] pnp: PnP ACPI init
337 [    0.785090] ACPI: bus type pnp registered
338 [    0.789163] pnp 00:00: >[bus 00-ff]
339 [    0.789168] pnp 00:00: >[io  0x0cf8-0x0cff]
340 [    0.789170] pnp 00:00: >[io  0x0000-0x0cf7 window]
341 [    0.789171] pnp 00:00: >[io  0x03b0-0x03df window]
342 [    0.789173] pnp 00:00: >[io  0x0d00-0xffff window]
343 [    0.789174] pnp 00:00: >[mem 0x000a0000-0x000bffff]
344 [    0.789176] pnp 00:00: >[mem 0x000c0000-0x000dffff]
345 [    0.789177] pnp 00:00: >[mem 0xe0000000-0xffffffff]
346 [    0.789212] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
347 [    0.789273] pnp 00:01: >[mem 0xf024fb02-0xf0250b01]
348 [    0.789320] system 00:01: >[mem 0xf024fb02-0xf0250b01] has been reserved
349 [    0.795993] system 00:01: >Plug and Play ACPI device, IDs PNP0c02 (active)
350 [    0.796009] pnp 00:02: >[irq 8]
351 [    0.796010] pnp 00:02: >[io  0x0070-0x0071]
352 [    0.796030] pnp 00:02: >Plug and Play ACPI device, IDs PNP0b00 (active)
353 [    0.796038] pnp 00:03: >[io  0x0061]
354 [    0.796059] pnp 00:03: >Plug and Play ACPI device, IDs PNP0800 (active)
355 [    0.796069] pnp 00:04: >[dma 4]
356 [    0.796070] pnp 00:04: >[io  0x0000-0x000f]
357 [    0.796071] pnp 00:04: >[io  0x0081-0x0083]
358 [    0.796073] pnp 00:04: >[io  0x0087]
359 [    0.796074] pnp 00:04: >[io  0x0089-0x008b]
360 [    0.796075] pnp 00:04: >[io  0x008f]
361 [    0.796076] pnp 00:04: >[io  0x00c0-0x00df]
362 [    0.796096] pnp 00:04: >Plug and Play ACPI device, IDs PNP0200 (active)
363 [    0.796102] pnp 00:05: >[io  0x00f0-0x00ff]
364 [    0.796105] pnp 00:05: >[irq 13]
365 [    0.796127] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active)
366 [    0.796220] pnp: PnP ACPI: found 6 devices
367 [    0.800299] ACPI: ACPI bus type pnp unregistered
368 [    0.811188] pci 0000:00:14.4: >PCI bridge to [bus 01-01]
369 [    0.816493] pci 0000:00:15.0: >PCI bridge to [bus 02-02]
370 [    0.821786] pci 0000:00:15.0: >  bridge window [io  0x1000-0x1fff]
371 [    0.827944] pci 0000:00:15.0: >  bridge window [mem 0xf0000000-0xf00fffff]
372 [    0.834796] pci 0000:00:15.1: >PCI bridge to [bus 03-03]
373 [    0.840095] pci 0000:00:15.1: >  bridge window [io  0x2000-0x2fff]
374 [    0.846255] pci 0000:00:15.1: >  bridge window [mem 0xf0100000-0xf01fffff 64bit pref]
375 [    0.854079] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
376 [    0.854081] pci_bus 0000:00: >resource 5 [io  0x0d00-0xffff]
377 [    0.854082] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
378 [    0.854084] pci_bus 0000:00: >resource 7 [mem 0x000c0000-0x000dffff]
379 [    0.854085] pci_bus 0000:00: >resource 8 [mem 0xe0000000-0xffffffff]
380 [    0.854087] pci_bus 0000:01: >resource 4 [io  0x0000-0x0cf7]
381 [    0.854088] pci_bus 0000:01: >resource 5 [io  0x0d00-0xffff]
382 [    0.854090] pci_bus 0000:01: >resource 6 [mem 0x000a0000-0x000bffff]
383 [    0.854091] pci_bus 0000:01: >resource 7 [mem 0x000c0000-0x000dffff]
384 [    0.854092] pci_bus 0000:01: >resource 8 [mem 0xe0000000-0xffffffff]
385 [    0.854094] pci_bus 0000:02: >resource 0 [io  0x1000-0x1fff]
386 [    0.854095] pci_bus 0000:02: >resource 1 [mem 0xf0000000-0xf00fffff]
387 [    0.854097] pci_bus 0000:03: >resource 0 [io  0x2000-0x2fff]
388 [    0.854098] pci_bus 0000:03: >resource 2 [mem 0xf0100000-0xf01fffff 64bit pref]
389 [    0.854122] NET: Registered protocol family 2
390 [    0.858628] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
391 [    0.866891] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
392 [    0.876131] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
393 [    0.883032] TCP: Hash tables configured (established 524288 bind 65536)
394 [    0.889620] TCP: reno registered
395 [    0.892852] UDP hash table entries: 4096 (order: 5, 131072 bytes)
396 [    0.898961] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
397 [    0.905546] NET: Registered protocol family 1
398 [    0.909904] pci 0000:00:01.0: >Boot video device
399 [    0.910160] PCI: CLS 64 bytes, default 64
400 [    0.910162] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
401 [    0.916584] software IO TLB [mem 0xbb12e000-0xbf12dfff] (64MB) mapped at [ffff8800bb12e000-ffff8800bf12dfff]
402 [    0.926738] LVT offset 0 assigned for vector 0x400
403 [    0.931583] perf: AMD IBS detected (0x000000ff)
404 [    0.936338] audit: initializing netlink socket (disabled)
405 [    0.941725] type=2000 audit(1399322437.736:1): initialized
406 [    0.963683] HugeTLB registered 2 MB page size, pre-allocated 0 pages
407 [    0.971936] VFS: Disk quotas dquot_6.5.2
408 [    0.975876] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
409 [    0.982756] fuse init (API version 7.19)
410 [    0.986730] msgmni has been set to 14896
411 [    0.991077] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
412 [    0.998544] io scheduler noop registered
413 [    1.002453] io scheduler deadline registered (default)
414 [    1.007601] io scheduler cfq registered
415 [    1.011555] pcieport 0000:00:15.0: >irq 40 for MSI/MSI-X
416 [    1.011642] pcieport 0000:00:15.1: >irq 41 for MSI/MSI-X
417 [    1.011710] pcieport 0000:00:15.0: >Signaling PME through PCIe PME interrupt
418 [    1.018733] pci 0000:02:00.0: >Signaling PME through PCIe PME interrupt
419 [    1.025321] pci 0000:02:00.1: >Signaling PME through PCIe PME interrupt
420 [    1.031912] pcie_pme 0000:00:15.0:pcie01: >service driver pcie_pme loaded
421 [    1.031931] pcieport 0000:00:15.1: >Signaling PME through PCIe PME interrupt
422 [    1.038949] pci 0000:03:00.0: >Signaling PME through PCIe PME interrupt
423 [    1.045540] pcie_pme 0000:00:15.1:pcie01: >service driver pcie_pme loaded
424 [    1.045553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
425 [    1.051124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
426 [    1.057799] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
427 [    1.065946] ACPI: Power Button [PWRB]
428 [    1.069627] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
429 [    1.076989] ACPI: Power Button [PWRF]
430 [    1.080691] ACPI: acpi_idle registered with cpuidle
431 [    1.082015] GHES: Failed to enable APEI firmware first mode.
432 [    1.087757] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
433 [    1.114383] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
434 [    1.121447] Linux agpgart interface v0.103
435 [    1.126618] brd: module loaded
436 [    1.130313] loop: module loaded
437 [    1.133515] ahci 0000:00:11.0: >version 3.0
438 [    1.133662] ahci 0000:00:11.0: >AHCI 0001.0300 32 slots 8 ports 6 Gbps 0x10 impl SATA mode
439 [    1.141905] ahci 0000:00:11.0: >flags: 64bit ncq sntf ilck led clo pio 
440 [    1.149066] scsi0 : ahci
441 [    1.151774] scsi1 : ahci
442 [    1.154437] scsi2 : ahci
443 [    1.157084] scsi3 : ahci
444 [    1.159748] scsi4 : ahci
445 [    1.162403] scsi5 : ahci
446 [    1.165055] scsi6 : ahci
447 [    1.167715] scsi7 : ahci
448 [    1.170281] ata1: DUMMY
449 [    1.172719] ata2: DUMMY
450 [    1.175160] ata3: DUMMY
451 [    1.177598] ata4: DUMMY
452 [    1.180042] ata5: SATA max UDMA/133 abar m2048@0xf024f000 port 0xf024f300 irq 19
453 [    1.187406] ata6: DUMMY
454 [    1.189844] ata7: DUMMY
455 [    1.192282] ata8: DUMMY
456 [    1.194855] ahci 0000:02:00.0: >irq 42 for MSI/MSI-X
457 [    1.194935] ahci 0000:02:00.0: >AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
458 [    1.203083] ahci 0000:02:00.0: >flags: 64bit ncq pm led clo pmp pio slum part 
459 [    1.210562] scsi8 : ahci
460 [    1.213204] scsi9 : ahci
461 [    1.215769] ata9: SATA max UDMA/133 abar m512@0xf0010000 port 0xf0010100 irq 42
462 [    1.223045] ata10: SATA max UDMA/133 abar m512@0xf0010000 port 0xf0010180 irq 42
463 [    1.230469] pata_acpi 0000:02:00.1: >enabling device (0000 -> 0001)
464 [    1.236936] Fixed MDIO Bus: probed
465 [    1.240356] tun: Universal TUN/TAP device driver, 1.6
466 [    1.245394] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
467 [    1.251672] PPP generic driver version 2.4.2
468 [    1.256045] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
469 [    1.262568] ehci_hcd 0000:00:12.2: >EHCI Host Controller
470 [    1.267869] ehci_hcd 0000:00:12.2: >new USB bus registered, assigned bus number 1
471 [    1.275324] ehci_hcd 0000:00:12.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
472 [    1.284091] QUIRK: Enable AMD PLL fix
473 [    1.284099] ehci_hcd 0000:00:12.2: >debug port 1
474 [    1.288719] ehci_hcd 0000:00:12.2: >irq 17, io mem 0xf024f800
475 [    1.305576] ehci_hcd 0000:00:12.2: >USB 2.0 started, EHCI 1.00
476 [    1.311415] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
477 [    1.318262] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
478 [    1.325544] usb usb1: >Product: EHCI Host Controller
479 [    1.330491] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
480 [    1.336821] usb usb1: >SerialNumber: 0000:00:12.2
481 [    1.341682] hub 1-0:1.0: >USB hub found
482 [    1.345515] hub 1-0:1.0: >5 ports detected
483 [    1.349684] ehci_hcd 0000:00:13.2: >EHCI Host Controller
484 [    1.354978] ehci_hcd 0000:00:13.2: >new USB bus registered, assigned bus number 2
485 [    1.362435] ehci_hcd 0000:00:13.2: >applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
486 [    1.371198] ehci_hcd 0000:00:13.2: >debug port 1
487 [    1.375814] ehci_hcd 0000:00:13.2: >irq 17, io mem 0xf024f900
488 [    1.393263] ehci_hcd 0000:00:13.2: >USB 2.0 started, EHCI 1.00
489 [    1.399105] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
490 [    1.405951] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
491 [    1.413231] usb usb2: >Product: EHCI Host Controller
492 [    1.418176] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
493 [    1.424508] usb usb2: >SerialNumber: 0000:00:13.2
494 [    1.429362] hub 2-0:1.0: >USB hub found
495 [    1.433191] hub 2-0:1.0: >5 ports detected
496 [    1.437338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
497 [    1.443535] ohci_hcd 0000:00:12.0: >OHCI Host Controller
498 [    1.448831] ohci_hcd 0000:00:12.0: >new USB bus registered, assigned bus number 3
499 [    1.456326] ohci_hcd 0000:00:12.0: >irq 18, io mem 0xf024c000
500 [    1.512858] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
501 [    1.523081] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
502 [    1.529537] ata5.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
503 [    1.529540] ata5.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
504 [    1.530498] ata5.00: configured for UDMA/133
505 [    1.530680] scsi 4:0:0:0: >Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
506 [    1.530811] sd 4:0:0:0: >Attached scsi generic sg0 type 0
507 [    1.530922] sd 4:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
508 [    1.530982] sd 4:0:0:0: >[sda] Write Protect is off
509 [    1.530983] sd 4:0:0:0: >[sda] Mode Sense: 00 3a 00 00
510 [    1.531006] sd 4:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
511 [    1.548667] ata9: SATA link down (SStatus 0 SControl 300)
512 [    1.585876]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
513 [    1.586609] sd 4:0:0:0: >[sda] Attached SCSI disk
514 [    1.597840] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
515 [    1.597925] ata10: SATA link down (SStatus 0 SControl 300)
516 [    1.610573] usb usb3: >Product: OHCI Host Controller
517 [    1.615520] usb usb3: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
518 [    1.621850] usb usb3: >SerialNumber: 0000:00:12.0
519 [    1.626711] hub 3-0:1.0: >USB hub found
520 [    1.630542] hub 3-0:1.0: >5 ports detected
521 [    1.634705] ohci_hcd 0000:00:13.0: >OHCI Host Controller
522 [    1.639997] ohci_hcd 0000:00:13.0: >new USB bus registered, assigned bus number 4
523 [    1.647464] ohci_hcd 0000:00:13.0: >irq 18, io mem 0xf024d000
524 [    1.712126] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
525 [    1.718988] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
526 [    1.726277] usb usb4: >Product: OHCI Host Controller
527 [    1.731231] usb usb4: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
528 [    1.737574] usb usb4: >SerialNumber: 0000:00:13.0
529 [    1.742414] hub 4-0:1.0: >USB hub found
530 [    1.746244] hub 4-0:1.0: >5 ports detected
531 [    1.750406] ohci_hcd 0000:00:14.5: >OHCI Host Controller
532 [    1.755700] ohci_hcd 0000:00:14.5: >new USB bus registered, assigned bus number 5
533 [    1.763163] ohci_hcd 0000:00:14.5: >irq 18, io mem 0xf024e000
534 [    1.827707] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
535 [    1.834568] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
536 [    1.841857] usb usb5: >Product: OHCI Host Controller
537 [    1.846812] usb usb5: >Manufacturer: Linux 3.5.0-17-generic ohci_hcd
538 [    1.853155] usb usb5: >SerialNumber: 0000:00:14.5
539 [    1.857990] hub 5-0:1.0: >USB hub found
540 [    1.861817] hub 5-0:1.0: >2 ports detected
541 [    1.865955] uhci_hcd: USB Universal Host Controller Interface driver
542 [    1.872334] xhci_hcd 0000:00:10.0: >xHCI Host Controller
543 [    1.877628] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 6
544 [    1.885266] xhci_hcd 0000:00:10.0: >irq 18, io mem 0xf0248000
545 [    1.891050] xhci_hcd 0000:00:10.0: >irq 43 for MSI/MSI-X
546 [    1.891054] xhci_hcd 0000:00:10.0: >irq 44 for MSI/MSI-X
547 [    1.891059] xhci_hcd 0000:00:10.0: >irq 45 for MSI/MSI-X
548 [    1.891066] xhci_hcd 0000:00:10.0: >irq 46 for MSI/MSI-X
549 [    1.891070] xhci_hcd 0000:00:10.0: >irq 47 for MSI/MSI-X
550 [    1.891147] usb usb6: >New USB device found, idVendor=1d6b, idProduct=0002
551 [    1.897997] usb usb6: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
552 [    1.905275] usb usb6: >Product: xHCI Host Controller
553 [    1.910233] usb usb6: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
554 [    1.916580] usb usb6: >SerialNumber: 0000:00:10.0
555 [    1.919372] Refined TSC clocksource calibration: 3793.098 MHz.
556 [    1.919375] Switching to clocksource tsc
557 [    1.931056] xHCI xhci_add_endpoint called for root hub
558 [    1.931057] xHCI xhci_check_bandwidth called for root hub
559 [    1.931073] hub 6-0:1.0: >USB hub found
560 [    1.934906] hub 6-0:1.0: >2 ports detected
561 [    1.939036] xhci_hcd 0000:00:10.0: >xHCI Host Controller
562 [    1.944335] xhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 7
563 [    1.951823] usb usb7: >New USB device found, idVendor=1d6b, idProduct=0003
564 [    1.958676] usb usb7: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
565 [    1.965967] usb usb7: >Product: xHCI Host Controller
566 [    1.970913] usb usb7: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
567 [    1.977261] usb usb7: >SerialNumber: 0000:00:10.0
568 [    1.982066] xHCI xhci_add_endpoint called for root hub
569 [    1.982067] xHCI xhci_check_bandwidth called for root hub
570 [    1.982084] hub 7-0:1.0: >USB hub found
571 [    1.985915] hub 7-0:1.0: >2 ports detected
572 [    1.990146] xhci_hcd 0000:00:10.1: >xHCI Host Controller
573 [    1.995457] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 8
574 [    2.003096] xhci_hcd 0000:00:10.1: >irq 17, io mem 0xf024a000
575 [    2.008863] xhci_hcd 0000:00:10.1: >irq 48 for MSI/MSI-X
576 [    2.008867] xhci_hcd 0000:00:10.1: >irq 49 for MSI/MSI-X
577 [    2.008871] xhci_hcd 0000:00:10.1: >irq 50 for MSI/MSI-X
578 [    2.008875] xhci_hcd 0000:00:10.1: >irq 51 for MSI/MSI-X
579 [    2.008879] xhci_hcd 0000:00:10.1: >irq 52 for MSI/MSI-X
580 [    2.008962] usb usb8: >New USB device found, idVendor=1d6b, idProduct=0002
581 [    2.015816] usb usb8: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
582 [    2.023093] usb usb8: >Product: xHCI Host Controller
583 [    2.028039] usb usb8: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
584 [    2.034369] usb usb8: >SerialNumber: 0000:00:10.1
585 [    2.039138] xHCI xhci_add_endpoint called for root hub
586 [    2.039140] xHCI xhci_check_bandwidth called for root hub
587 [    2.039160] hub 8-0:1.0: >USB hub found
588 [    2.042990] hub 8-0:1.0: >2 ports detected
589 [    2.047121] xhci_hcd 0000:00:10.1: >xHCI Host Controller
590 [    2.052410] xhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 9
591 [    2.059890] usb usb9: >New USB device found, idVendor=1d6b, idProduct=0003
592 [    2.066735] usb usb9: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
593 [    2.074007] usb usb9: >Product: xHCI Host Controller
594 [    2.078955] usb usb9: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
595 [    2.085285] usb usb9: >SerialNumber: 0000:00:10.1
596 [    2.090022] xHCI xhci_add_endpoint called for root hub
597 [    2.090023] xHCI xhci_check_bandwidth called for root hub
598 [    2.090039] hub 9-0:1.0: >USB hub found
599 [    2.093865] hub 9-0:1.0: >2 ports detected
600 [    2.098160] usbcore: registered new interface driver libusual
601 [    2.103930] i8042: PNP: No PS/2 controller found. Probing ports directly.
602 [    2.361857] serio: i8042 KBD port at 0x60,0x64 irq 1
603 [    2.366957] mousedev: PS/2 mouse device common for all mice
604 [    2.372681] rtc_cmos 00:02: >RTC can wake from S4
605 [    2.377522] rtc_cmos 00:02: >rtc core: registered rtc_cmos as rtc0
606 [    2.383698] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
607 [    2.389915] device-mapper: uevent: version 1.0.3
608 [    2.394643] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
609 [    2.403092] cpuidle: using governor ladder
610 [    2.407286] cpuidle: using governor menu
611 [    2.411198] EFI Variables Facility v0.08 2004-May-17
612 [    2.416179] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
613 [    2.424925] ashmem: initialized
614 [    2.428204] TCP: cubic registered
615 [    2.431581] NET: Registered protocol family 10
616 [    2.436144] NET: Registered protocol family 17
617 [    2.440572] Key type dns_resolver registered
618 [    2.445015] PM: Hibernation image not present or could not be loaded.
619 [    2.445024] registered taskstats version 1
620 [    2.451134] Key type trusted registered
621 [    2.456458] Key type encrypted registered
622 [    2.462304]   Magic number: 14:622:699
623 [    2.466130] rtc_cmos 00:02: >setting system clock to 2014-05-05 20:40:40 UTC (1399322440)
624 [    2.474365] powernow-k8: Found 1 AMD A10-5800K APU with Radeon(tm) HD Graphics   (4 cpu cores) (version 2.20.00)
625 [    2.484545] powernow-k8: Core Performance Boosting: on.
626 [    2.489850] powernow-k8:    0 : pstate 0 (3800 MHz)
627 [    2.494703] powernow-k8:    1 : pstate 1 (3400 MHz)
628 [    2.499567] powernow-k8:    2 : pstate 2 (2900 MHz)
629 [    2.504435] powernow-k8:    3 : pstate 3 (2400 MHz)
630 [    2.509299] powernow-k8:    4 : pstate 4 (1900 MHz)
631 [    2.514152] powernow-k8:    5 : pstate 5 (1400 MHz)
632 [    2.519356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
633 [    2.525345] EDD information not available.
634 [    2.531610] Freeing unused kernel memory: 928k freed
635 [    2.536753] Write protecting the kernel read-only data: 12288k
636 [    2.548142] Freeing unused kernel memory: 1472k freed
637 [    2.557615] Freeing unused kernel memory: 1124k freed
638 [    2.578517] udevd[114]: starting version 175
639 [    2.604893] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
640 [    2.610795] sdhci: Secure Digital Host Controller Interface driver
641 [    2.612287] r8169 0000:03:00.0: >irq 53 for MSI/MSI-X
642 [    2.612456] r8169 0000:03:00.0: >eth0: RTL8168f/8111f at 0xffffc90001794000, 08:60:6e:d4:a8:d8, XID 08000800 IRQ 53
643 [    2.612457] r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
644 [    2.636052] sdhci: Copyright(c) Pierre Ossman
645 [    2.640594] scsi10 : pata_jmicron
646 [    2.645668] sdhci-pci 0000:00:14.7: >SDHCI controller found [1022:7806] (rev 0)
647 [    2.647360] scsi11 : pata_jmicron
648 [    2.647431] ata11: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1000 irq 17
649 [    2.647432] ata12: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1008 irq 17
650 [    2.670726] mmc0: no vmmc regulator found
651 [    2.674785] Registered led device: mmc0::
652 [    2.704488] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
653 [    2.808771] ata11.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.07, max UDMA/33
654 [    2.828715] ata11.00: configured for UDMA/33
655 [    2.837512] scsi 10:0:0:0: >CD-ROM            _NEC     DVD_RW ND-3520AW 3.07 PQ: 0 ANSI: 5
656 [    2.847680] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
657 [    2.854446] cdrom: Uniform CD-ROM driver Revision: 3.20
658 [    2.859788] sr 10:0:0:0: >Attached scsi CD-ROM sr0
659 [    2.859964] sr 10:0:0:0: >Attached scsi generic sg1 type 5
660 [    2.911615] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
661 [    2.918480] EXT4-fs (sda7): write access will be enabled during recovery
662 [    4.171705] EXT4-fs (sda7): recovery complete
663 [    4.179818] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
664 [   13.987403] Adding 979928k swap on /dev/sda6.  Priority:-1 extents:1 across:979928k 
665 [   13.999123] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
666 [   14.045321] udevd[370]: starting version 175
667 [   14.061474] lp: driver loaded but no devices found
668 [   14.079485] [drm] Initialized drm 1.1.0 20060810
669 [   14.084182] [drm] radeon defaulting to kernel modesetting.
670 [   14.084186] [drm] radeon kernel modesetting enabled.
671 [   14.084379] [drm] initializing kernel modesetting (ARUBA 0x1002:0x9901 0x1002:0x9901).
672 [   14.084418] [drm] register mmio base: 0xF0200000
673 [   14.084419] [drm] register mmio size: 262144
674 [   14.084489] ATOM BIOS: 113
675 [   14.084514] radeon 0000:00:01.0: >VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
676 [   14.084516] radeon 0000:00:01.0: >GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
677 [   14.084985] [drm] Detected VRAM RAM=512M, BAR=256M
678 [   14.084988] [drm] RAM width 64bits DDR
679 [   14.085106] [TTM] Zone  kernel: Available graphics memory: 3815306 kiB
680 [   14.085108] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
681 [   14.085109] [TTM] Initializing pool allocator
682 [   14.085120] [TTM] Initializing DMA pool allocator
683 [   14.085143] [drm] radeon: 512M of VRAM memory ready
684 [   14.085146] [drm] radeon: 512M of GTT memory ready.
685 [   14.085173] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
686 [   14.085175] [drm] Driver supports precise vblank timestamp query.
687 [   14.085208] radeon 0000:00:01.0: >irq 54 for MSI/MSI-X
688 [   14.085221] radeon 0000:00:01.0: >radeon: using MSI.
689 [   14.085745] [drm] radeon: irq initialized.
690 [   14.085750] [drm] GART: num cpu pages 131072, num gpu pages 131072
691 [   14.086455] [drm] Loading ARUBA Microcode
692 [   14.128785] microcode: CPU0: patch_level=0x0600110f
693 [   14.243514] microcode: CPU0: new patch_level=0x06001119
694 [   14.243603] microcode: CPU1: patch_level=0x0600110f
695 [   14.245725] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
696 [   14.259387] microcode: CPU1: new patch_level=0x06001119
697 [   14.259410] microcode: CPU2: patch_level=0x0600110f
698 [   14.259431] radeon 0000:00:01.0: >WB enabled
699 [   14.259434] radeon 0000:00:01.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801fa328c00
700 [   14.259436] radeon 0000:00:01.0: >fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801fa328c04
701 [   14.259438] radeon 0000:00:01.0: >fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801fa328c08
702 [   14.275209] microcode: CPU2: new patch_level=0x06001119
703 [   14.275236] microcode: CPU3: patch_level=0x0600110f
704 [   14.291032] microcode: CPU3: new patch_level=0x06001119
705 [   14.291119] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
706 [   14.296644] kvm: Nested Virtualization enabled
707 [   14.296648] kvm: Nested Paging enabled
708 [   14.305897] [drm] ring test on 0 succeeded in 2 usecs
709 [   14.306706] [drm] ib test on ring 0 succeeded in 0 usecs
710 [   14.320107] [drm] Radeon Display Connectors
711 [   14.320110] [drm] Connector 0:
712 [   14.320111] [drm]   HDMI-A-1
713 [   14.320112] [drm]   HPD1
714 [   14.320114] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
715 [   14.320115] [drm]   Encoders:
716 [   14.320116] [drm]     DFP1: INTERNAL_UNIPHY2
717 [   14.320118] [drm] Connector 1:
718 [   14.320119] [drm]   VGA-1
719 [   14.320119] [drm]   HPD2
720 [   14.320121] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
721 [   14.320122] [drm]   Encoders:
722 [   14.320123] [drm]     CRT1: INTERNAL_UNIPHY2
723 [   14.320124] [drm]     CRT1: NUTMEG
724 [   14.320124] [drm] Connector 2:
725 [   14.320125] [drm]   DVI-D-1
726 [   14.320126] [drm]   HPD3
727 [   14.320127] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
728 [   14.320127] [drm]   Encoders:
729 [   14.320128] [drm]     DFP2: INTERNAL_UNIPHY
730 [   14.332236] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
731 [   14.371964] [drm] Internal thermal controller without fan control
732 [   14.371979] [drm] radeon: power management initialized
733 [   14.387670] init: failsafe main process (646) killed by TERM signal
734 [   14.476399] Bluetooth: Core ver 2.16
735 [   14.476428] NET: Registered protocol family 31
736 [   14.476429] Bluetooth: HCI device and connection manager initialized
737 [   14.476674] Bluetooth: HCI socket layer initialized
738 [   14.476677] Bluetooth: L2CAP socket layer initialized
739 [   14.476682] Bluetooth: SCO socket layer initialized
740 [   14.481518] Bluetooth: RFCOMM TTY layer initialized
741 [   14.481523] Bluetooth: RFCOMM socket layer initialized
742 [   14.481524] Bluetooth: RFCOMM ver 1.11
743 [   14.483346] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
744 [   14.483349] Bluetooth: BNEP filters: protocol multicast
745 [   14.504012] ppdev: user-space parallel port driver
746 [   14.591124] r8169 0000:03:00.0: >eth4: link down
747 [   14.591155] r8169 0000:03:00.0: >eth4: link down
748 [   14.591645] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
749 [   14.591949] IPv6: ADDRCONF(NETDEV_UP): eth4: link is not ready
750 [   14.617973] [drm] fb mappable at 0xE1144000
751 [   14.617976] [drm] vram apper at 0xE0000000
752 [   14.617977] [drm] size 5242880
753 [   14.617979] [drm] fb depth is 24
754 [   14.617980] [drm]    pitch is 5120
755 [   14.618172] fbcon: radeondrmfb (fb0) is primary device
756 [   14.740735] Console: switching to colour frame buffer device 160x64
757 [   14.743262] fb0: radeondrmfb frame buffer device
758 [   14.743262] drm: registered panic notifier
759 [   14.743268] [drm] Initialized radeon 2.18.0 20080528 for 0000:00:01.0 on minor 0
760 [   14.743356] piix4_smbus 0000:00:14.0: >SMBus Host Controller at 0xb00, revision 0
761 [   14.743718] hda-intel: Force to non-snoop mode
762 [   14.743768] snd_hda_intel 0000:00:01.1: >irq 55 for MSI/MSI-X
763 [   14.768887] init: plymouth main process (289) killed by ABRT signal
764 [   14.769091] init: plymouth-splash main process (796) terminated with status 2
765 [   15.261725] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
766 [   15.261835] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
767 [   15.316831] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
768 [   15.316927] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
769 [   15.316990] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
770 [   15.317052] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
771 [   15.317115] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
772 [   15.317178] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
773 [   15.317236] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
774 [   15.317296] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
775 [   15.459486] init: alsa-restore main process (1023) terminated with status 99
776 [   16.185076] init: plymouth-stop pre-start process (1381) terminated with status 1
777 [   16.903437] r8169 0000:03:00.0: >eth4: link up
778 [   16.904660] IPv6: ADDRCONF(NETDEV_CHANGE): eth4: link becomes ready
779 [   20.127972] UDF-fs: Partition marked readonly; forcing readonly mount
780 [   20.156438] UDF-fs: INFO Mounting volume 'Muz z Acapulca', timestamp 2008/10/02 11:59 (1078)
781 [   72.968155] PM: Syncing filesystems ... done.
782 [   73.037530] PM: Preparing system for mem sleep
783 [   73.058244] Freezing user space processes ... (elapsed 0.01 seconds) done.
784 [   73.071729] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
785 [   73.087710] PM: Entering mem sleep
786 [   73.087729] Suspending console(s) (use no_console_suspend to debug)
787 [   73.099694] sd 4:0:0:0: >[sda] Synchronizing SCSI cache
788 [   73.099859] sd 4:0:0:0: >[sda] Stopping disk
789 [   73.203159] ACPI handle has no context!
790 [   73.219076] PM: suspend of drv:snd_hda_intel dev:0000:00:01.1 complete after 117.481 msecs
791 [   73.219085] PM: suspend of drv:snd_hda_intel dev:0000:00:14.2 complete after 119.011 msecs
792 [   73.659605] PM: suspend of drv:sd dev:4:0:0:0 complete after 561.648 msecs
793 [   73.659637] PM: suspend of drv:scsi dev:target4:0:0 complete after 561.632 msecs
794 [   73.659648] PM: suspend of drv:scsi dev:host4 complete after 561.375 msecs
795 [   73.659704] PM: suspend of drv: dev:ata5 complete after 561.343 msecs
796 [   73.667372] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 566.708 msecs
797 [   74.251887] PM: suspend of drv:radeon dev:0000:00:01.0 complete after 1153.444 msecs
798 [   74.251905] PM: suspend of drv: dev:pci0000:00 complete after 1153.417 msecs
799 [   74.251917] PM: suspend of devices complete after 1167.470 msecs
800 [   74.251920] PM: suspend devices took 1.168 seconds
801 [   74.252202] PM: late suspend of devices complete after 0.279 msecs
802 [   74.252557] pcieport 0000:00:15.1: >wake-up capability enabled by ACPI
803 [   74.267904] ohci_hcd 0000:00:14.5: >wake-up capability enabled by ACPI
804 [   74.267981] ehci_hcd 0000:00:13.2: >wake-up capability enabled by ACPI
805 [   74.283819] ohci_hcd 0000:00:13.0: >wake-up capability enabled by ACPI
806 [   74.283865] ehci_hcd 0000:00:12.2: >wake-up capability enabled by ACPI
807 [   74.299756] ohci_hcd 0000:00:12.0: >wake-up capability enabled by ACPI
808 [   74.299806] xhci_hcd 0000:00:10.1: >wake-up capability enabled by ACPI
809 [   74.315754] xhci_hcd 0000:00:10.0: >wake-up capability enabled by ACPI
810 [   74.331693] PM: noirq suspend of devices complete after 79.733 msecs
811 [   74.331861] ACPI: Preparing to enter system sleep state S3
812 [   74.331948] PM: Saving platform NVS memory
813 [   74.331950] Disabling non-boot CPUs ...
814 [   74.435315] CPU 1 is now offline
815 [   74.542984] CPU 2 is now offline
816 [   74.543666] Broke affinity for irq 17
817 [   74.646654] CPU 3 is now offline
818 [   74.647232] ACPI: Low-level resume complete
819 [   74.647261] PM: Restoring platform NVS memory
820 [   74.647446] LVT offset 0 assigned for vector 0xf9
821 [   74.661765] microcode: CPU0: new patch_level=0x06001119
822 [   74.661814] Enabling non-boot CPUs ...
823 [   74.661887] Booting Node 0 Processor 1 APIC 0x11
824 [   74.672804] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
825 [   74.672805] perf: IBS APIC setup failed on cpu #1
826 [   74.689657] microcode: CPU1: new patch_level=0x06001119
827 [   74.689697] CPU1 is up
828 [   74.689772] Booting Node 0 Processor 2 APIC 0x12
829 [   74.700695] [Firmware Bug]: cpu 2, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
830 [   74.700696] perf: IBS APIC setup failed on cpu #2
831 [   74.717509] microcode: CPU2: new patch_level=0x06001119
832 [   74.717521] CPU2 is up
833 [   74.717583] Booting Node 0 Processor 3 APIC 0x13
834 [   74.728493] [Firmware Bug]: cpu 3, try to use APIC500 (LVT offset 0) for vector 0x400, but the register is already in use for vector 0xf9 on another cpu
835 [   74.728494] perf: IBS APIC setup failed on cpu #3
836 [   74.745241] microcode: CPU3: new patch_level=0x06001119
837 [   74.745250] CPU3 is up
838 [   74.745751] ACPI: Waking up from system sleep state S3
839 [   74.745988] xhci_hcd 0000:00:10.0: >wake-up capability disabled by ACPI
840 [   74.746063] xhci_hcd 0000:00:10.1: >wake-up capability disabled by ACPI
841 [   74.746113] ohci_hcd 0000:00:12.0: >wake-up capability disabled by ACPI
842 [   74.758932] ehci_hcd 0000:00:12.2: >wake-up capability disabled by ACPI
843 [   74.758959] ohci_hcd 0000:00:13.0: >wake-up capability disabled by ACPI
844 [   74.774889] ehci_hcd 0000:00:13.2: >wake-up capability disabled by ACPI
845 [   74.775047] ohci_hcd 0000:00:14.5: >wake-up capability disabled by ACPI
846 [   74.825494] PM: noirq resume of devices complete after 79.910 msecs
847 [   74.825721] PM: early resume of devices complete after 0.166 msecs
848 [   74.825818] snd_hda_intel 0000:00:01.1: >irq 55 for MSI/MSI-X
849 [   74.826126] pcieport 0000:00:15.1: >wake-up capability disabled by ACPI
850 [   74.838974] [drm] PCIE GART of 512M enabled (table at 0x0000000000144000).
851 [   74.839122] radeon 0000:00:01.0: >WB enabled
852 [   74.839124] radeon 0000:00:01.0: >fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8801fa328c00
853 [   74.839125] radeon 0000:00:01.0: >fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8801fa328c04
854 [   74.839126] radeon 0000:00:01.0: >fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8801fa328c08
855 [   74.857725] [drm] ring test on 0 succeeded in 1 usecs
856 [   74.858290] [drm] ib test on ring 0 succeeded in 0 usecs
857 [   74.899801] r8169 0000:03:00.0: >eth4: link down
858 [   74.982299] PM: resume of drv:hub dev:1-0:1.0 complete after 156.390 msecs
859 [   74.982321] PM: resume of drv: dev:ep_00 complete after 156.396 msecs
860 [   74.982326] PM: resume of drv: dev:ep_81 complete after 156.408 msecs
861 [   74.998080] PM: resume of drv:scsi dev:host11 complete after 164.925 msecs
862 [   74.998088] PM: resume of drv:scsi_host dev:host11 complete after 164.904 msecs
863 [   75.141807] ata9: SATA link down (SStatus 0 SControl 300)
864 [   75.145783] ata10: SATA link down (SStatus 0 SControl 300)
865 [   75.146982] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
866 [   75.157805] PM: resume of drv:scsi dev:host8 complete after 332.505 msecs
867 [   75.157834] PM: resume of drv:scsi_host dev:host8 complete after 332.527 msecs
868 [   75.161769] PM: resume of drv:scsi dev:host9 complete after 336.472 msecs
869 [   75.161803] PM: resume of drv:scsi_host dev:host9 complete after 336.476 msecs
870 [   75.168919] ata5.00: configured for UDMA/133
871 [   75.169032] PM: resume of drv:scsi dev:host4 complete after 343.808 msecs
872 [   75.169042] PM: resume of drv:ata_port dev:ata5 complete after 297.570 msecs
873 [   75.169049] PM: resume of drv:scsi_host dev:host4 complete after 343.828 msecs
874 [   75.169067] PM: resume of drv:scsi dev:target4:0:0 complete after 343.697 msecs
875 [   75.169080] PM: resume of drv:sd dev:4:0:0:0 complete after 343.705 msecs
876 [   75.169089] sd 4:0:0:0: >[sda] Starting disk
877 [   75.176712] PM: resume of drv:scsi_device dev:4:0:0:0 complete after 351.349 msecs
878 [   75.202683] ata11.00: configured for UDMA/33
879 [   75.281437] PM: resume of drv:ata_port dev:ata11 complete after 104.934 msecs
880 [   75.281441] PM: resume of drv:scsi dev:host10 complete after 449.215 msecs
881 [   75.281465] PM: resume of drv:scsi dev:target10:0:0 complete after 449.121 msecs
882 [   75.281473] PM: resume of drv:scsi_host dev:host10 complete after 449.216 msecs
883 [   75.281477] PM: resume of drv:sr dev:10:0:0:0 complete after 449.099 msecs
884 [   75.281568] PM: resume of drv:scsi_device dev:10:0:0:0 complete after 449.161 msecs
885 [   75.341648] PM: resume of devices complete after 517.508 msecs
886 [   75.341927] PM: resume devices took 0.520 seconds
887 [   75.382866] PM: Finishing wakeup.
888 [   75.382873] Restarting tasks ... done.
889 [   75.492627] usb 1-2: >new high-speed USB device number 2 using ehci_hcd
890 [   75.626025] usb 1-2: >New USB device found, idVendor=0457, idProduct=0151
891 [   75.626033] usb 1-2: >New USB device strings: Mfr=0, Product=2, SerialNumber=3
892 [   75.626037] usb 1-2: >Product: USB Mass Storage Device
893 [   75.626041] usb 1-2: >SerialNumber: a5a33ce13d26a5
894 [   75.702382] Initializing USB Mass Storage driver...
895 [   75.702613] usb-storage 1-2:1.0: >Quirks match for vid 0457 pid 0151: 80
896 [   75.702671] scsi12 : usb-storage 1-2:1.0
897 [   75.702835] usbcore: registered new interface driver usb-storage
898 [   75.702838] USB Mass Storage support registered.
899 [   75.709980] usbcore: registered new interface driver uas
900 [   76.698515] scsi 12:0:0:0: >Direct-Access     USB 2.0  Flash Disk       0.00 PQ: 0 ANSI: 2
901 [   76.699332] sd 12:0:0:0: >Attached scsi generic sg2 type 0
902 [   76.700283] sd 12:0:0:0: >[sdb] 512000 512-byte logical blocks: (262 MB/250 MiB)
903 [   76.700965] sd 12:0:0:0: >[sdb] Write Protect is off
904 [   76.700972] sd 12:0:0:0: >[sdb] Mode Sense: 00 00 00 00
905 [   76.702530] sd 12:0:0:0: >[sdb] Asking for cache data failed
906 [   76.708223] sd 12:0:0:0: >[sdb] Assuming drive cache: write through
907 [   76.717669] sd 12:0:0:0: >[sdb] Asking for cache data failed
908 [   76.723351] sd 12:0:0:0: >[sdb] Assuming drive cache: write through
909 [   76.837765]  sdb: sdb1
910 [   76.841026] sd 12:0:0:0: >[sdb] Asking for cache data failed
911 [   76.846694] sd 12:0:0:0: >[sdb] Assuming drive cache: write through
912 [   76.852966] sd 12:0:0:0: >[sdb] Attached SCSI removable disk
913 [   77.259189] r8169 0000:03:00.0: >eth4: link up
914 [   87.452424] VFS: busy inodes on changed media or resized disk sr0