asrock/e350m1/4.0-7061-gc21e073/2014-10-18T08:35:38Z
[board-status.git] / asus / a8v-e_se / 4.0-5192-g812d624 / 2014-01-03T17:47:48Z / kernel_log.txt
1 [    0.000000] Initializing cgroup subsys cpuset
2 [    0.000000] Initializing cgroup subsys cpu
3 [    0.000000] Linux version 3.5.0-17-generic (buildd@allspice) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
4 [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
5 [    0.000000] KERNEL supported cpus:
6 [    0.000000]   Intel GenuineIntel
7 [    0.000000]   AMD AuthenticAMD
8 [    0.000000]   Centaur CentaurHauls
9 [    0.000000] e820: BIOS-provided physical RAM map:
10 [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
11 [    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
12 [    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
13 [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
14 [    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
15 [    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
16 [    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
17 [    0.000000] BIOS-e820: [mem 0x00000000fecc0000-0x00000000fecc0fff] reserved
18 [    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
19 [    0.000000] NX (Execute Disable) protection: active
20 [    0.000000] DMI present.
21 [    0.000000] DMI: ASUS A8V-E SE, BIOS 4.0-5192-g812d624 01/03/2014
22 [    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
23 [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24 [    0.000000] AGP bridge at 00:00:00
25 [    0.000000] Aperture from AGP @ c0000000 old size 32 MB
26 [    0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
27 [    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
28 [    0.000000] MTRR default type: uncachable
29 [    0.000000] MTRR fixed ranges enabled:
30 [    0.000000]   00000-9FFFF write-back
31 [    0.000000]   A0000-BFFFF uncachable
32 [    0.000000]   C0000-FFFFF write-back
33 [    0.000000] MTRR variable ranges enabled:
34 [    0.000000]   0 base 0000000000 mask FFE0000000 write-back
35 [    0.000000]   1 disabled
36 [    0.000000]   2 disabled
37 [    0.000000]   3 disabled
38 [    0.000000]   4 disabled
39 [    0.000000]   5 disabled
40 [    0.000000]   6 disabled
41 [    0.000000]   7 disabled
42 [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43 [    0.000000] found SMP MP-table at [mem 0x000fd950-0x000fd95f] mapped at [ffff8800000fd950]
44 [    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
45 [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
46 [    0.000000] init_memory_mapping: [mem 0x00000000-0x1ffdffff]
47 [    0.000000]  [mem 0x00000000-0x1fdfffff] page 2M
48 [    0.000000]  [mem 0x1fe00000-0x1ffdffff] page 4k
49 [    0.000000] kernel direct mapping tables up to 0x1ffdffff @ [mem 0x1ffdd000-0x1ffdffff]
50 [    0.000000] RAMDISK: [mem 0x1eaab000-0x1f931fff]
51 [    0.000000] ACPI: RSDP 00000000000fd930 00014 (v00 CORE  )
52 [    0.000000] ACPI: RSDT 000000001ffe1424 00038 (v01 CORE   COREBOOT 00000000 CORE 00000000)
53 [    0.000000] ACPI: FACP 000000001ffe1ed5 000F4 (v04 CORE   COREBOOT 00000000 CORE 0000002A)
54 [    0.000000] ACPI: DSDT 000000001ffe1508 009CD (v01 CORE   COREBOOT 00000001 INTL 20130626)
55 [    0.000000] ACPI: FACS 000000001ffe14c8 00040
56 [    0.000000] ACPI: APIC 000000001ffe1fc9 00066 (v01 CORE   COREBOOT 00000000 CORE 00000000)
57 [    0.000000] ACPI: MCFG 000000001ffe202f 0003C (v01 CORE   COREBOOT 00000000 CORE 00000000)
58 [    0.000000] ACPI: SRAT 000000001ffe206b 00090 (v01 CORE   COREBOOT 00000000 CORE 00000000)
59 [    0.000000] ACPI: SSDT 000000001ffe20fb 00273 (v02 CORE   COREBOOT 0000002A CORE 0000002A)
60 [    0.000000] ACPI: Local APIC address 0xfee00000
61 [    0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
62 [    0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
63 [    0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x1fffffff]
64 [    0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x1ffdffff] -> [mem 0x00000000-0x1ffdffff]
65 [    0.000000] Initmem setup node 0 [mem 0x00000000-0x1ffdffff]
66 [    0.000000]   NODE_DATA [mem 0x1ffd9000-0x1ffdcfff]
67 [    0.000000]  [ffffea0000000000-ffffea00007fffff] PMD -> [ffff88001de00000-ffff88001e5fffff] on node 0
68 [    0.000000] Zone ranges:
69 [    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
70 [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
71 [    0.000000]   Normal   empty
72 [    0.000000] Movable zone start for each node
73 [    0.000000] Early memory node ranges
74 [    0.000000]   node   0: [mem 0x00010000-0x0009efff]
75 [    0.000000]   node   0: [mem 0x00100000-0x1ffdffff]
76 [    0.000000] On node 0 totalpages: 130927
77 [    0.000000]   DMA zone: 64 pages used for memmap
78 [    0.000000]   DMA zone: 6 pages reserved
79 [    0.000000]   DMA zone: 3913 pages, LIFO batch:0
80 [    0.000000]   DMA32 zone: 1984 pages used for memmap
81 [    0.000000]   DMA32 zone: 124960 pages, LIFO batch:31
82 [    0.000000] ACPI: PM-Timer IO Port: 0x508
83 [    0.000000] ACPI: Local APIC address 0xfee00000
84 [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
85 [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
86 [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
87 [    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
88 [    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
89 [    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
90 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
91 [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
92 [    0.000000] ACPI: IRQ0 used by override.
93 [    0.000000] ACPI: IRQ2 used by override.
94 [    0.000000] ACPI: IRQ9 used by override.
95 [    0.000000] Using ACPI (MADT) for SMP configuration information
96 [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
97 [    0.000000] nr_irqs_gsi: 64
98 [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
99 [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
100 [    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
101 [    0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
102 [    0.000000] Booting paravirtualized kernel on bare hardware
103 [    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
104 [    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s83584 r8192 d22912 u2097152
105 [    0.000000] pcpu-alloc: s83584 r8192 d22912 u2097152 alloc=1*2097152
106 [    0.000000] pcpu-alloc: [0] 0 
107 [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 128873
108 [    0.000000] Policy zone: DMA32
109 [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=4fcc9a5d-b1f6-4986-9caf-7a7651ac83f2 ro console=ttyS0,115200
110 [    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
111 [    0.000000] __ex_table already sorted, skipping sort
112 [    0.000000] Checking aperture...
113 [    0.000000] AGP bridge at 00:00:00
114 [    0.000000] Aperture from AGP @ c0000000 old size 32 MB
115 [    0.000000] Aperture from AGP @ c0000000 size 256 MB (APSIZE f00)
116 [    0.000000] Node 0: aperture @ f4000000 size 64 MB
117 [    0.000000] Memory: 484708k/524160k available (6711k kernel code, 452k absent, 39000k reserved, 6459k data, 928k init)
118 [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
119 [    0.000000] Hierarchical RCU implementation.
120 [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
121 [    0.000000] NR_IRQS:16640 nr_irqs:256 16
122 [    0.000000] Extended CMOS year: 5100
123 [    0.000000] WARNING: Persistent clock returned invalid value!
124 [    0.000000]          Check your CMOS/BIOS settings.
125 [    0.000000] spurious 8259A interrupt: IRQ7.
126 [    0.000000] Console: colour VGA+ 80x25
127 [    0.000000] console [ttyS0] enabled
128 [    0.000000] allocated 2097152 bytes of page_cgroup
129 [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
130 [    0.000000] Fast TSC calibration using PIT
131 [    0.000000] Detected 1000.021 MHz processor.
132 [    0.012005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.04 BogoMIPS (lpj=4000084)
133 [    0.018799] pid_max: default: 32768 minimum: 301
134 [    0.020058] Security Framework initialized
135 [    0.024039] AppArmor: AppArmor initialized
136 [    0.028006] Yama: becoming mindful.
137 [    0.032207] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
138 [    0.040023] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
139 [    0.044261] Mount-cache hash table entries: 256
140 [    0.052141] Initializing cgroup subsys cpuacct
141 [    0.056010] Initializing cgroup subsys memory
142 [    0.060025] Initializing cgroup subsys devices
143 [    0.064010] Initializing cgroup subsys freezer
144 [    0.068009] Initializing cgroup subsys blkio
145 [    0.072009] Initializing cgroup subsys perf_event
146 [    0.076057] tseg: 0000000000
147 [    0.076084] mce: CPU supports 5 MCE banks
148 [    0.080073] SMP alternatives: switching to UP code
149 [    0.103448] Freeing SMP alternatives: 24k freed
150 [    0.108035] ACPI: Core revision 20120320
151 [    0.112726] ftrace: allocating 25118 entries in 99 pages
152 [    0.137404] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
153 [    0.181936] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
154 [    0.188011] Performance Events: AMD PMU driver.
155 [    0.188014] ... version:                0
156 [    0.192013] ... bit width:              48
157 [    0.196013] ... generic registers:      4
158 [    0.200014] ... value mask:             0000ffffffffffff
159 [    0.204014] ... max period:             00007fffffffffff
160 [    0.208014] ... fixed-purpose events:   0
161 [    0.212015] ... event mask:             000000000000000f
162 [    0.216381] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
163 [    0.220072] Brought up 1 CPUs
164 [    0.224018] Total of 1 processors activated (2000.04 BogoMIPS).
165 [    0.228933] devtmpfs: initialized
166 [    0.237758] EVM: security.selinux
167 [    0.240017] EVM: security.SMACK64
168 [    0.244017] EVM: security.capability
169 [    0.249966] dummy: 
170 [    0.252084] RTC time: 23:01:24, date: 01/03/14
171 [    0.256095] NET: Registered protocol family 16
172 [    0.260275] node 0 link 0: io port [1000, 3fff]
173 [    0.260282] TOM: 0000000020000000 aka 512M
174 [    0.264022] node 0 link 0: mmio [a0000, bffff]
175 [    0.264029] node 0 link 0: mmio [e0000000, f02fffff]
176 [    0.264034] node 0 link 0: mmio [c0000000, d7ffffff]
177 [    0.264039] bus: [00, 06] on node 0 link 0
178 [    0.264044] bus: 00 [io  0x0000-0xffff]
179 [    0.264048] bus: 00 [mem 0x000a0000-0x000bffff]
180 [    0.264052] bus: 00 [mem 0xd8000000-0xfcffffffff]
181 [    0.264055] bus: 00 [mem 0x20000000-0xd7ffffff]
182 [    0.264148] ACPI FADT declares the system doesn't support MSI, so disable it
183 [    0.268019] ACPI: bus type pci registered
184 [    0.272122] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
185 [    0.276021] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
186 [    0.296604] PCI: Using configuration type 1 for base access
187 [    0.304236] bio: create slab <bio-0> at 0
188 [    0.308242] ACPI: Added _OSI(Module Device)
189 [    0.312028] ACPI: Added _OSI(Processor Device)
190 [    0.316022] ACPI: Added _OSI(3.0 _SCP Extensions)
191 [    0.320022] ACPI: Added _OSI(Processor Aggregator Device)
192 [    0.324290] ACPI: EC: Look up EC in DSDT
193 [    0.328771] ACPI: Interpreter enabled
194 [    0.332025] ACPI: (supports S0 S5)
195 [    0.335476] ACPI: Using IOAPIC for interrupt routing
196 [    0.337179] ACPI: No dock devices found.
197 [    0.340029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
198 [    0.349856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-06])
199 [    0.357667] pci_root PNP0A03:00: >host bridge window [io  0x03b0-0x03df]
200 [    0.360028] pci_root PNP0A03:00: >host bridge window [io  0x0d00-0x3fff]
201 [    0.364027] pci_root PNP0A03:00: >host bridge window [mem 0xc0000000-0xd7ffffff]
202 [    0.368027] pci_root PNP0A03:00: >host bridge window [mem 0xe0000000-0xf02fffff]
203 [    0.372028] pci_root PNP0A03:00: >host bridge window [mem 0x000a0000-0x000bffff]
204 [    0.376028] pci_root PNP0A03:00: >host bridge window [io  0x0000-0x0cf7]
205 [    0.380030] pci_root PNP0A03:00: >host bridge window expanded to [io  0x0000-0x0cf7]; [io  0x0000-0x0cf7] ignored
206 [    0.384089] PCI host bridge to bus 0000:00
207 [    0.388030] pci_bus 0000:00: >root bus resource [io  0x0000-0x0cf7]
208 [    0.392029] pci_bus 0000:00: >root bus resource [io  0x0d00-0x3fff]
209 [    0.396029] pci_bus 0000:00: >root bus resource [mem 0xc0000000-0xd7ffffff]
210 [    0.400029] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xf02fffff]
211 [    0.404030] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
212 [    0.408052] pci 0000:00:00.0: >[1106:0238] type 00 class 0x060000
213 [    0.408068] pci 0000:00:00.0: >reg 10: [mem 0xc0000000-0xcfffffff pref]
214 [    0.408177] pci 0000:00:00.1: >[1106:1238] type 00 class 0x060000
215 [    0.408233] pci 0000:00:00.2: >[1106:2238] type 00 class 0x060000
216 [    0.412033] pci 0000:00:00.3: >[1106:3238] type 00 class 0x060000
217 [    0.412089] pci 0000:00:00.4: >[1106:4238] type 00 class 0x060000
218 [    0.412144] pci 0000:00:00.5: >[1106:5238] type 00 class 0x080020
219 [    0.412221] pci 0000:00:00.7: >[1106:7238] type 00 class 0x060000
220 [    0.412280] pci 0000:00:01.0: >[1106:b188] type 01 class 0x060400
221 [    0.412358] pci 0000:00:02.0: >[1106:a238] type 01 class 0x060400
222 [    0.412448] pci 0000:00:02.0: >PME# supported from D0 D3hot D3cold
223 [    0.412487] pci 0000:00:03.0: >[1106:c238] type 01 class 0x060400
224 [    0.412576] pci 0000:00:03.0: >PME# supported from D0 D3hot D3cold
225 [    0.412610] pci 0000:00:03.1: >[1106:d238] type 01 class 0x060400
226 [    0.412699] pci 0000:00:03.1: >PME# supported from D0 D3hot D3cold
227 [    0.412733] pci 0000:00:03.2: >[1106:e238] type 01 class 0x060400
228 [    0.412822] pci 0000:00:03.2: >PME# supported from D0 D3hot D3cold
229 [    0.412856] pci 0000:00:03.3: >[1106:f238] type 01 class 0x060400
230 [    0.412944] pci 0000:00:03.3: >PME# supported from D0 D3hot D3cold
231 [    0.412998] pci 0000:00:0f.0: >[1106:3149] type 00 class 0x01018f
232 [    0.413020] pci 0000:00:0f.0: >reg 10: [io  0x3ca0-0x3ca7]
233 [    0.413034] pci 0000:00:0f.0: >reg 14: [io  0x3cb0-0x3cb3]
234 [    0.413047] pci 0000:00:0f.0: >reg 18: [io  0x3ca8-0x3caf]
235 [    0.413061] pci 0000:00:0f.0: >reg 1c: [io  0x3cb4-0x3cb7]
236 [    0.413074] pci 0000:00:0f.0: >reg 20: [io  0x3c80-0x3c8f]
237 [    0.413088] pci 0000:00:0f.0: >reg 24: [io  0x3000-0x30ff]
238 [    0.413150] pci 0000:00:0f.1: >[1106:0571] type 00 class 0x01018a
239 [    0.413204] pci 0000:00:0f.1: >reg 20: [io  0x3c90-0x3c9f]
240 [    0.413283] pci 0000:00:10.0: >[1106:3038] type 00 class 0x0c0300
241 [    0.413335] pci 0000:00:10.0: >reg 20: [io  0x3c00-0x3c1f]
242 [    0.413382] pci 0000:00:10.0: >supports D1 D2
243 [    0.413387] pci 0000:00:10.0: >PME# supported from D0 D1 D2 D3hot D3cold
244 [    0.413413] pci 0000:00:10.1: >[1106:3038] type 00 class 0x0c0300
245 [    0.413464] pci 0000:00:10.1: >reg 20: [io  0x3c20-0x3c3f]
246 [    0.413512] pci 0000:00:10.1: >supports D1 D2
247 [    0.413517] pci 0000:00:10.1: >PME# supported from D0 D1 D2 D3hot D3cold
248 [    0.413546] pci 0000:00:10.2: >[1106:3038] type 00 class 0x0c0300
249 [    0.413597] pci 0000:00:10.2: >reg 20: [io  0x3c40-0x3c5f]
250 [    0.413645] pci 0000:00:10.2: >supports D1 D2
251 [    0.413650] pci 0000:00:10.2: >PME# supported from D0 D1 D2 D3hot D3cold
252 [    0.413676] pci 0000:00:10.3: >[1106:3038] type 00 class 0x0c0300
253 [    0.413727] pci 0000:00:10.3: >reg 20: [io  0x3c60-0x3c7f]
254 [    0.413774] pci 0000:00:10.3: >supports D1 D2
255 [    0.413779] pci 0000:00:10.3: >PME# supported from D0 D1 D2 D3hot D3cold
256 [    0.413805] pci 0000:00:10.4: >[1106:3104] type 00 class 0x0c0320
257 [    0.413826] pci 0000:00:10.4: >reg 10: [mem 0xf0200000-0xf02000ff]
258 [    0.413904] pci 0000:00:10.4: >supports D1 D2
259 [    0.413909] pci 0000:00:10.4: >PME# supported from D0 D1 D2 D3hot D3cold
260 [    0.413941] pci 0000:00:11.0: >[1106:3227] type 00 class 0x060100
261 [    0.414009] HPET not enabled in BIOS. You might try hpet=force boot option
262 [    0.416085] pci 0000:00:11.5: >[1106:3059] type 00 class 0x040100
263 [    0.416107] pci 0000:00:11.5: >reg 10: [io  0x3400-0x34ff]
264 [    0.416189] pci 0000:00:11.5: >supports D1 D2
265 [    0.416213] pci 0000:00:11.6: >[1106:3068] type 00 class 0x078000
266 [    0.416235] pci 0000:00:11.6: >reg 10: [io  0x3800-0x38ff]
267 [    0.416344] pci 0000:00:18.0: >[1022:1100] type 00 class 0x060000
268 [    0.416383] pci 0000:00:18.1: >[1022:1101] type 00 class 0x060000
269 [    0.416418] pci 0000:00:18.2: >[1022:1102] type 00 class 0x060000
270 [    0.416450] pci 0000:00:18.3: >[1022:1103] type 00 class 0x060000
271 [    0.416551] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
272 [    0.420097] pci 0000:02:00.0: >[1002:5b60] type 00 class 0x030000
273 [    0.420116] pci 0000:02:00.0: >reg 10: [mem 0xd0000000-0xd7ffffff pref]
274 [    0.420130] pci 0000:02:00.0: >reg 14: [io  0x1000-0x10ff]
275 [    0.420144] pci 0000:02:00.0: >reg 18: [mem 0xf0020000-0xf002ffff]
276 [    0.420181] pci 0000:02:00.0: >reg 30: [mem 0xf0000000-0xf001ffff pref]
277 [    0.420231] pci 0000:02:00.0: >supports D1 D2
278 [    0.420265] pci 0000:02:00.1: >[1002:5b70] type 00 class 0x038000
279 [    0.420282] pci 0000:02:00.1: >reg 10: [mem 0xf0030000-0xf003ffff]
280 [    0.420370] pci 0000:02:00.1: >supports D1 D2
281 [    0.420392] pci 0000:02:00.0: >disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
282 [    0.424042] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
283 [    0.428033] pci 0000:00:02.0: >  bridge window [io  0x1000-0x1fff]
284 [    0.428041] pci 0000:00:02.0: >  bridge window [mem 0xf0000000-0xf00fffff]
285 [    0.428049] pci 0000:00:02.0: >  bridge window [mem 0xd0000000-0xd7ffffff pref]
286 [    0.428099] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
287 [    0.432086] pci 0000:00:03.1: >PCI bridge to [bus 04-04]
288 [    0.436107] pci 0000:05:00.0: >[11ab:4362] type 00 class 0x020000
289 [    0.436134] pci 0000:05:00.0: >reg 10: [mem 0xf0120000-0xf0123fff 64bit]
290 [    0.436150] pci 0000:05:00.0: >reg 18: [io  0x2000-0x20ff]
291 [    0.436196] pci 0000:05:00.0: >reg 30: [mem 0xf0100000-0xf011ffff pref]
292 [    0.436268] pci 0000:05:00.0: >supports D1 D2
293 [    0.436273] pci 0000:05:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
294 [    0.436292] pci 0000:05:00.0: >disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
295 [    0.440040] pci 0000:00:03.2: >PCI bridge to [bus 05-05]
296 [    0.444034] pci 0000:00:03.2: >  bridge window [io  0x2000-0x2fff]
297 [    0.444042] pci 0000:00:03.2: >  bridge window [mem 0xf0100000-0xf01fffff]
298 [    0.444094] pci 0000:00:03.3: >PCI bridge to [bus 06-06]
299 [    0.448072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
300 [    0.448203] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGG._PRT]
301 [    0.448239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
302 [    0.448269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
303 [    0.448298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
304 [    0.448327] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
305 [    0.448360]  pci0000:00: >Unable to request _OSC control (_OSC support mask: 0x0f)
306 [    0.459493] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
307 [    0.460033] vgaarb: loaded
308 [    0.464031] vgaarb: bridge control possible 0000:02:00.0
309 [    0.468432] SCSI subsystem initialized
310 [    0.472139] libata version 3.00 loaded.
311 [    0.472180] ACPI: bus type usb registered
312 [    0.476094] usbcore: registered new interface driver usbfs
313 [    0.480050] usbcore: registered new interface driver hub
314 [    0.484076] usbcore: registered new device driver usb
315 [    0.492076] PCI: Using ACPI for IRQ routing
316 [    0.504935] PCI: pci_cache_line_size set to 64 bytes
317 [    0.505090] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
318 [    0.505094] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
319 [    0.505292] NetLabel: Initializing
320 [    0.508035] NetLabel:  domain hash size = 128
321 [    0.512033] NetLabel:  protocols = UNLABELED CIPSOv4
322 [    0.516058] NetLabel:  unlabeled traffic allowed by default
323 [    0.539241] AppArmor: AppArmor Filesystem Enabled
324 [    0.540091] pnp: PnP ACPI init
325 [    0.544077] ACPI: bus type pnp registered
326 [    0.553865] pnp 00:00: >[bus 00-06]
327 [    0.553873] pnp 00:00: >[io  0x03b0-0x03df window]
328 [    0.553878] pnp 00:00: >[io  0x0d00-0x3fff window]
329 [    0.553884] pnp 00:00: >[mem 0xc0000000-0xd7ffffff window]
330 [    0.553889] pnp 00:00: >[mem 0xe0000000-0xf02fffff window]
331 [    0.553894] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
332 [    0.553899] pnp 00:00: >[io  0x0cf8-0x0cff]
333 [    0.553905] pnp 00:00: >[io  0x0000-0x0cf7 window]
334 [    0.553961] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a03 (active)
335 [    0.554025] pnp 00:01: >[io  0x0060]
336 [    0.554030] pnp 00:01: >[io  0x0064]
337 [    0.554050] pnp 00:01: >[irq 1]
338 [    0.554100] pnp 00:01: >Plug and Play ACPI device, IDs PNP0303 (active)
339 [    0.554152] pnp 00:02: >[irq 12]
340 [    0.554195] pnp 00:02: >Plug and Play ACPI device, IDs PNP0f13 (active)
341 [    0.554240] pnp 00:03: >[io  0x03f2-0x03f5]
342 [    0.554246] pnp 00:03: >[io  0x03f7]
343 [    0.554256] pnp 00:03: >[irq 6]
344 [    0.554261] pnp 00:03: >[dma 2]
345 [    0.554310] pnp 00:03: >Plug and Play ACPI device, IDs PNP0700 (active)
346 [    0.554333] pnp 00:04: >[mem 0xfec00000-0xfec000ff]
347 [    0.554338] pnp 00:04: >[mem 0xff000000-0xffffffff]
348 [    0.554348] pnp 00:04: >[mem 0xfecc0000-0xfecc00ff]
349 [    0.554353] pnp 00:04: >[mem 0xe0000000-0xefffffff]
350 [    0.554358] pnp 00:04: >[io  0x0500-0x057f]
351 [    0.554363] pnp 00:04: >[io  0x04d0-0x04d1]
352 [    0.554368] pnp 00:04: >[io  0x0400-0x040f]
353 [    0.554479] system 00:04: >[io  0x0500-0x057f] has been reserved
354 [    0.556041] system 00:04: >[io  0x04d0-0x04d1] has been reserved
355 [    0.560040] system 00:04: >[io  0x0400-0x040f] has been reserved
356 [    0.564042] system 00:04: >[mem 0xfec00000-0xfec000ff] could not be reserved
357 [    0.568041] system 00:04: >[mem 0xff000000-0xffffffff] has been reserved
358 [    0.572041] system 00:04: >[mem 0xfecc0000-0xfecc00ff] could not be reserved
359 [    0.576041] system 00:04: >[mem 0xe0000000-0xefffffff] has been reserved
360 [    0.580043] system 00:04: >Plug and Play ACPI device, IDs PNP0c02 (active)
361 [    0.580052] pnp: PnP ACPI: found 5 devices
362 [    0.584038] ACPI: ACPI bus type pnp unregistered
363 [    0.596457] Switching to clocksource acpi_pm
364 [    0.600139] pci 0000:00:03.0: >bridge window [io  0x1000-0x0fff] to [bus 03-03] add_size 1000
365 [    0.600148] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 03-03] add_size 200000
366 [    0.600155] pci 0000:00:03.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
367 [    0.600164] pci 0000:00:03.1: >bridge window [io  0x1000-0x0fff] to [bus 04-04] add_size 1000
368 [    0.600171] pci 0000:00:03.1: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 04-04] add_size 200000
369 [    0.600178] pci 0000:00:03.1: >bridge window [mem 0x00100000-0x000fffff] to [bus 04-04] add_size 200000
370 [    0.600188] pci 0000:00:03.2: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 05-05] add_size 200000
371 [    0.600198] pci 0000:00:03.3: >bridge window [io  0x1000-0x0fff] to [bus 06-06] add_size 1000
372 [    0.600205] pci 0000:00:03.3: >bridge window [mem 0x00100000-0x000fffff pref] to [bus 06-06] add_size 200000
373 [    0.600212] pci 0000:00:03.3: >bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000
374 [    0.600241] pci 0000:00:03.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
375 [    0.600247] pci 0000:00:03.0: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
376 [    0.600254] pci 0000:00:03.1: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
377 [    0.600260] pci 0000:00:03.1: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
378 [    0.600267] pci 0000:00:03.2: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
379 [    0.600273] pci 0000:00:03.3: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
380 [    0.600279] pci 0000:00:03.3: >res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
381 [    0.600285] pci 0000:00:03.0: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
382 [    0.600291] pci 0000:00:03.1: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
383 [    0.600297] pci 0000:00:03.3: >res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
384 [    0.600308] pci 0000:00:03.0: >BAR 14: can't assign mem (size 0x200000)
385 [    0.606930] pci 0000:00:03.0: >BAR 15: can't assign mem pref (size 0x200000)
386 [    0.613985] pci 0000:00:03.1: >BAR 14: can't assign mem (size 0x200000)
387 [    0.620603] pci 0000:00:03.1: >BAR 15: can't assign mem pref (size 0x200000)
388 [    0.627659] pci 0000:00:03.2: >BAR 15: can't assign mem pref (size 0x200000)
389 [    0.634711] pci 0000:00:03.3: >BAR 14: can't assign mem (size 0x200000)
390 [    0.641334] pci 0000:00:03.3: >BAR 15: can't assign mem pref (size 0x200000)
391 [    0.648391] pci 0000:00:03.0: >BAR 13: can't assign io (size 0x1000)
392 [    0.654751] pci 0000:00:03.1: >BAR 13: can't assign io (size 0x1000)
393 [    0.661112] pci 0000:00:03.3: >BAR 13: can't assign io (size 0x1000)
394 [    0.667477] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
395 [    0.672803] pci 0000:00:02.0: >PCI bridge to [bus 02-02]
396 [    0.678123] pci 0000:00:02.0: >  bridge window [io  0x1000-0x1fff]
397 [    0.684313] pci 0000:00:02.0: >  bridge window [mem 0xf0000000-0xf00fffff]
398 [    0.691193] pci 0000:00:02.0: >  bridge window [mem 0xd0000000-0xd7ffffff pref]
399 [    0.698510] pci 0000:00:03.0: >PCI bridge to [bus 03-03]
400 [    0.703838] pci 0000:00:03.1: >PCI bridge to [bus 04-04]
401 [    0.709168] pci 0000:00:03.2: >PCI bridge to [bus 05-05]
402 [    0.714487] pci 0000:00:03.2: >  bridge window [io  0x2000-0x2fff]
403 [    0.720679] pci 0000:00:03.2: >  bridge window [mem 0xf0100000-0xf01fffff]
404 [    0.727563] pci 0000:00:03.3: >PCI bridge to [bus 06-06]
405 [    0.732897] pci 0000:00:01.0: >setting latency timer to 64
406 [    0.732986] pci_bus 0000:00: >resource 4 [io  0x0000-0x0cf7]
407 [    0.732991] pci_bus 0000:00: >resource 5 [io  0x0d00-0x3fff]
408 [    0.732997] pci_bus 0000:00: >resource 6 [mem 0xc0000000-0xd7ffffff]
409 [    0.733002] pci_bus 0000:00: >resource 7 [mem 0xe0000000-0xf02fffff]
410 [    0.733008] pci_bus 0000:00: >resource 8 [mem 0x000a0000-0x000bffff]
411 [    0.733014] pci_bus 0000:02: >resource 0 [io  0x1000-0x1fff]
412 [    0.733020] pci_bus 0000:02: >resource 1 [mem 0xf0000000-0xf00fffff]
413 [    0.733025] pci_bus 0000:02: >resource 2 [mem 0xd0000000-0xd7ffffff pref]
414 [    0.733031] pci_bus 0000:05: >resource 0 [io  0x2000-0x2fff]
415 [    0.733037] pci_bus 0000:05: >resource 1 [mem 0xf0100000-0xf01fffff]
416 [    0.733115] NET: Registered protocol family 2
417 [    0.737583] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
418 [    0.744823] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
419 [    0.752298] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
420 [    0.759115] TCP: Hash tables configured (established 16384 bind 16384)
421 [    0.765645] TCP: reno registered
422 [    0.768882] UDP hash table entries: 256 (order: 1, 8192 bytes)
423 [    0.774730] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
424 [    0.781128] NET: Registered protocol family 1
425 [    0.785542] pci 0000:00:01.0: >disabling DAC on VIA PCI bridge
426 [    0.791383] pci 0000:00:02.0: >MSI quirk detected; subordinate MSI disabled
427 [    0.798560] pci 0000:02:00.0: >Boot video device
428 [    0.798575] PCI: CLS 64 bytes, default 64
429 [    0.798733] agpgart-amd64 0000:00:00.0: >AGP bridge [1106/0238]
430 [    0.804666] agpgart-amd64 0000:00:00.0: >aperture from AGP @ c0000000 size 256 MB
431 [    0.812252] Trying to unpack rootfs image as initramfs...
432 [    0.848308] agpgart-amd64 0000:00:00.0: >AGP aperture is 256M @ 0xc0000000
433 [    0.855372] platform rtc_cmos: >registered platform RTC device (no PNP device found)
434 [    0.872643] audit: initializing netlink socket (disabled)
435 [    0.884086] type=2000 audit(0.880:1): initialized
436 [    1.001238] HugeTLB registered 2 MB page size, pre-allocated 0 pages
437 [    1.019648] VFS: Disk quotas dquot_6.5.2
438 [    1.028625] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
439 [    1.048299] fuse init (API version 7.19)
440 [    1.052430] msgmni has been set to 946
441 [    1.072398] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
442 [    1.088110] io scheduler noop registered
443 [    1.092062] io scheduler deadline registered (default)
444 [    1.104370] io scheduler cfq registered
445 [    1.113167] ioapic: probe of 0000:00:00.5 failed with error -22
446 [    1.124626] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
447 [    1.136426] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
448 [    1.148367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
449 [    1.164413] ACPI: Power Button [PWRF]
450 [    1.173200] GHES: HEST is not enabled!
451 [    1.180487] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
452 [    1.216478] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
453 [    1.250590] Linux agpgart interface v0.103
454 [    1.268940] brd: module loaded
455 [    1.273575] loop: module loaded
456 [    1.281220] Fixed MDIO Bus: probed
457 [    1.288637] tun: Universal TUN/TAP device driver, 1.6
458 [    1.293702] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
459 [    1.312150] PPP generic driver version 2.4.2
460 [    1.320639] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
461 [    1.336211] ehci_hcd 0000:00:10.4: >EHCI Host Controller
462 [    1.341561] ehci_hcd 0000:00:10.4: >new USB bus registered, assigned bus number 1
463 [    1.356531] ehci_hcd 0000:00:10.4: >irq 21, io mem 0xf0200000
464 [    1.380278] ehci_hcd 0000:00:10.4: >USB 2.0 started, EHCI 1.00
465 [    1.392315] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
466 [    1.399205] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
467 [    1.406522] usb usb1: >Product: EHCI Host Controller
468 [    1.411495] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
469 [    1.417859] usb usb1: >SerialNumber: 0000:00:10.4
470 [    1.452393] hub 1-0:1.0: >USB hub found
471 [    1.460245] hub 1-0:1.0: >8 ports detected
472 [    1.468609] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
473 [    1.480265] uhci_hcd: USB Universal Host Controller Interface driver
474 [    1.492484] uhci_hcd 0000:00:10.0: >UHCI Host Controller
475 [    1.497829] uhci_hcd 0000:00:10.0: >new USB bus registered, assigned bus number 2
476 [    1.512185] uhci_hcd 0000:00:10.0: >irq 21, io base 0x00003c00
477 [    1.524153] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
478 [    1.531041] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
479 [    1.538350] usb usb2: >Product: UHCI Host Controller
480 [    1.543324] usb usb2: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
481 [    1.549687] usb usb2: >SerialNumber: 0000:00:10.0
482 [    1.588666] hub 2-0:1.0: >USB hub found
483 [    1.596427] hub 2-0:1.0: >2 ports detected
484 [    1.604275] uhci_hcd 0000:00:10.1: >UHCI Host Controller
485 [    1.616273] uhci_hcd 0000:00:10.1: >new USB bus registered, assigned bus number 3
486 [    1.628160] uhci_hcd 0000:00:10.1: >irq 21, io base 0x00003c20
487 [    1.640389] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
488 [    1.647282] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
489 [    1.654595] usb usb3: >Product: UHCI Host Controller
490 [    1.659569] usb usb3: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
491 [    1.665934] usb usb3: >SerialNumber: 0000:00:10.1
492 [    1.700301] hub 3-0:1.0: >USB hub found
493 [    1.708150] hub 3-0:1.0: >2 ports detected
494 [    1.716414] uhci_hcd 0000:00:10.2: >UHCI Host Controller
495 [    1.728064] uhci_hcd 0000:00:10.2: >new USB bus registered, assigned bus number 4
496 [    1.744288] uhci_hcd 0000:00:10.2: >irq 21, io base 0x00003c40
497 [    1.756150] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
498 [    1.763040] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
499 [    1.770357] usb usb4: >Product: UHCI Host Controller
500 [    1.775331] usb usb4: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
501 [    1.781695] usb usb4: >SerialNumber: 0000:00:10.2
502 [    1.816658] hub 4-0:1.0: >USB hub found
503 [    1.824032] hub 4-0:1.0: >2 ports detected
504 [    1.832347] uhci_hcd 0000:00:10.3: >UHCI Host Controller
505 [    1.844517] uhci_hcd 0000:00:10.3: >new USB bus registered, assigned bus number 5
506 [    1.860415] uhci_hcd 0000:00:10.3: >irq 21, io base 0x00003c60
507 [    1.872327] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0001
508 [    1.879220] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
509 [    1.886534] usb usb5: >Product: UHCI Host Controller
510 [    1.891529] usb usb5: >Manufacturer: Linux 3.5.0-17-generic uhci_hcd
511 [    1.897890] usb usb5: >SerialNumber: 0000:00:10.3
512 [    1.932331] hub 5-0:1.0: >USB hub found
513 [    1.940291] hub 5-0:1.0: >2 ports detected
514 [    1.948398] usbcore: registered new interface driver libusual
515 [    1.954185] Refined TSC clocksource calibration: 1000.035 MHz.
516 [    1.964424] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
517 [    1.972469] Switching to clocksource tsc
518 [    1.984628] serio: i8042 KBD port at 0x60,0x64 irq 1
519 [    1.996044] serio: i8042 AUX port at 0x60,0x64 irq 12
520 [    2.001342] mousedev: PS/2 mouse device common for all mice
521 [    2.012626] rtc_cmos rtc_cmos: >RTC can wake from S4
522 [    2.020650] rtc_cmos rtc_cmos: >rtc core: registered rtc_cmos as rtc0
523 [    2.035226] rtc0: alarms up to one year, y3k, 114 bytes nvram
524 [    2.044817] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
525 [    2.056431] device-mapper: uevent: version 1.0.3
526 [    2.067404] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
527 [    2.084036] cpuidle: using governor ladder
528 [    2.092406] cpuidle: using governor menu
529 [    2.096342] EFI Variables Facility v0.08 2004-May-17
530 [    2.112515] ashmem: initialized
531 [    2.120666] TCP: cubic registered
532 [    2.124256] NET: Registered protocol family 10
533 [    2.136578] NET: Registered protocol family 17
534 [    2.148116] Key type dns_resolver registered
535 [    2.152684] PM: Hibernation image not present or could not be loaded.
536 [    2.152709] registered taskstats version 1
537 [    2.174802] Freeing initrd memory: 14876k freed
538 [    2.197142] Key type trusted registered
539 [    2.205383] Key type encrypted registered
540 [    2.214347]   Magic number: 14:594:48
541 [    2.218212] rtc_cmos rtc_cmos: >setting system clock to 2014-01-03 23:01:26 UTC (1388790086)
542 [    2.226733] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ (1 cpu cores) (version 2.20.00)
543 [    2.235782] powernow-k8: fid 0xa (1800 MHz), vid 0x4
544 [    2.240759] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
545 [    2.245852] Marking TSC unstable due to cpufreq changes
546 [    2.251735] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
547 [    2.262576] EDD information not available.
548 [    2.269958] Switching to clocksource acpi_pm
549 [    2.279922] Freeing unused kernel memory: 928k freed
550 [    2.285558] Write protecting the kernel read-only data: 12288k
551 [    2.297890] Freeing unused kernel memory: 1472k freed
552 [    2.308953] Freeing unused kernel memory: 1124k freed
553 [    2.342547] udevd[83]: starting version 175
554 [    2.478167] sky2: driver version 1.30
555 [    2.495680] pata_via 0000:00:0f.1: >version 0.3.4
556 [    2.498165] Floppy drive(s): fd0 is unknown type 15 (usb?), fd1 is unknown type 15 (usb?)
557 [    2.506465] scsi0 : pata_via
558 [    2.509489] scsi1 : pata_via
559 [    2.512431] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3c90 irq 14
560 [    2.519392] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3c98 irq 15
561 [    2.551152] sata_via 0000:00:0f.0: >version 2.6
562 [    2.551209] sata_via 0000:00:0f.0: >routed to hard irq line 0
563 [    2.562040] sky2 0000:05:00.0: >PCI: Disallowing DAC for device
564 [    2.568035] scsi2 : sata_via
565 [    2.573610] scsi3 : sata_via
566 [    2.578052] sky2 0000:05:00.0: >Yukon-2 EC chip revision 2
567 [    2.585089] ata3: SATA max UDMA/133 cmd 0x3ca0 ctl 0x3cb0 bmdma 0x3c80 irq 20
568 [    2.592246] ata4: SATA max UDMA/133 cmd 0x3ca8 ctl 0x3cb4 bmdma 0x3c88 irq 20
569 [    2.603543] sky2 0000:05:00.0: >eth0: addr 00:13:d4:76:a2:ac
570 [    2.640021] FDC 0 is a post-1991 82077
571 [    2.800022] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
572 [    2.968892] ata3.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
573 [    2.975682] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
574 [    2.988885] ata3.00: configured for UDMA/133
575 [    2.993292] scsi 2:0:0:0: >Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
576 [    3.001730] sd 2:0:0:0: >[sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
577 [    3.009449] sd 2:0:0:0: >Attached scsi generic sg0 type 0
578 [    3.014896] sd 2:0:0:0: >[sda] Write Protect is off
579 [    3.019780] sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
580 [    3.019925] sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
581 [    3.086110]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
582 [    3.091651] sd 2:0:0:0: >[sda] Attached SCSI disk
583 [    3.220018] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
584 [    3.830968] EXT4-fs (sda7): INFO: recovery required on readonly filesystem
585 [    3.837858] EXT4-fs (sda7): write access will be enabled during recovery
586 [    4.365315] EXT4-fs (sda7): recovery complete
587 [    4.372548] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
588 [   12.240176] Adding 979928k swap on /dev/sda6.  Priority:-1 extents:1 across:979928k 
589 [   12.592246] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
590 [   12.679697] udevd[302]: starting version 175
591 [   12.735695] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
592 [   13.026791] lp: driver loaded but no devices found
593 [   14.231949] ppdev: user-space parallel port driver
594 [   14.263571] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
595 [   14.264188] parport0: irq 7 detected
596 [   14.266065] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
597 [   14.330506] Bluetooth: Core ver 2.16
598 [   14.330600] NET: Registered protocol family 31
599 [   14.330603] Bluetooth: HCI device and connection manager initialized
600 [   14.330606] Bluetooth: HCI socket layer initialized
601 [   14.330608] Bluetooth: L2CAP socket layer initialized
602 [   14.330614] Bluetooth: SCO socket layer initialized
603 [   14.360228] lp0: using parport0 (polling).
604 [   14.391291] Bluetooth: RFCOMM TTY layer initialized
605 [   14.391301] Bluetooth: RFCOMM socket layer initialized
606 [   14.391304] Bluetooth: RFCOMM ver 1.11
607 [   14.412359] [drm] Initialized drm 1.1.0 20060810
608 [   14.460751] MCE: In-kernel MCE decoding enabled.
609 [   14.485020] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
610 [   14.485025] Bluetooth: BNEP filters: protocol multicast
611 [   14.518586] EDAC MC: Ver: 2.1.0
612 [   14.568955] AMD64 EDAC driver v3.4.0
613 [   14.569009] EDAC amd64: DRAM ECC disabled.
614 [   14.569013] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
615 [   14.569013]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
616 [   14.569013]  (Note that use of the override may cause unknown side effects.)
617 [   14.625135] microcode: AMD CPU family 0xf not supported
618 [   15.048749] [drm] radeon defaulting to kernel modesetting.
619 [   15.048756] [drm] radeon kernel modesetting enabled.
620 [   15.049235] [drm] initializing kernel modesetting (RV380 0x1002:0x5B60 0x1043:0x0083).
621 [   15.049242] radeon 0000:02:00.0: >PCI: Disallowing DAC for device
622 [   15.049244] radeon: No suitable DMA available.
623 [   15.049260] [drm] register mmio base: 0xF0020000
624 [   15.049262] [drm] register mmio size: 65536
625 [   15.049391] [drm] Generation 2 PCI interface, using max accessible memory
626 [   15.049398] radeon 0000:02:00.0: >VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
627 [   15.049402] radeon 0000:02:00.0: >GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
628 [   15.049419] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
629 [   15.049421] [drm] Driver supports precise vblank timestamp query.
630 [   15.049454] [drm] radeon: irq initialized.
631 [   15.049733] [drm] Detected VRAM RAM=128M, BAR=128M
632 [   15.049738] [drm] RAM width 64bits DDR
633 [   15.049921] [TTM] Zone  kernel: Available graphics memory: 251566 kiB
634 [   15.049923] [TTM] Initializing pool allocator
635 [   15.049930] [TTM] Initializing DMA pool allocator
636 [   15.049970] [drm] radeon: 128M of VRAM memory ready
637 [   15.049972] [drm] radeon: 512M of GTT memory ready.
638 [   15.049998] [drm] GART: num cpu pages 131072, num gpu pages 131072
639 [   15.054456] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
640 [   15.055588] [drm] PCIE GART of 512M enabled (table at 0x00000000D0040000).
641 [   15.055621] radeon 0000:02:00.0: >WB enabled
642 [   15.055626] radeon 0000:02:00.0: >fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff88000d9c5000
643 [   15.057795] [drm] Loading R300 Microcode
644 [   15.268261] [drm] radeon: ring at 0x00000000B0001000
645 [   15.268288] [drm] ring test succeeded in 1 usecs
646 [   15.268522] [drm] ib test succeeded in 0 usecs
647 [   15.268771] [drm] Radeon Display Connectors
648 [   15.268774] [drm] Connector 0:
649 [   15.268775] [drm]   VGA-1
650 [   15.268778] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
651 [   15.268780] [drm]   Encoders:
652 [   15.268781] [drm]     CRT1: INTERNAL_DAC1
653 [   15.268783] [drm] Connector 1:
654 [   15.268785] [drm]   DVI-I-1
655 [   15.268786] [drm]   HPD1
656 [   15.268789] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
657 [   15.268790] [drm]   Encoders:
658 [   15.268791] [drm]     CRT2: INTERNAL_DAC2
659 [   15.268793] [drm]     DFP1: INTERNAL_TMDS1
660 [   15.268794] [drm] Connector 2:
661 [   15.268796] [drm]   SVIDEO-1
662 [   15.268797] [drm]   Encoders:
663 [   15.268799] [drm]     TV1: INTERNAL_DAC2
664 [   15.333943] [drm] fb mappable at 0xD00C0000
665 [   15.333948] [drm] vram apper at 0xD0000000
666 [   15.333950] [drm] size 5242880
667 [   15.333952] [drm] fb depth is 24
668 [   15.333953] [drm]    pitch is 5120
669 [   15.334200] fbcon: radeondrmfb (fb0) is primary device
670 [   15.398619] Console: switching to colour frame buffer device 160x64
671 [   15.405947] fb0: radeondrmfb frame buffer device
672 [   15.405950] drm: registered panic notifier
673 [   15.410093] [drm] Initialized radeon 2.18.0 20080528 for 0000:02:00.0 on minor 0
674 [   15.494217] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2
675 [   15.633893] init: plymouth main process (220) killed by ABRT signal
676 [   15.634383] init: plymouth-splash main process (635) terminated with status 2
677 [   15.714145] init: failsafe main process (533) killed by TERM signal
678 [   16.280030] snd_via82xx_modem 0000:00:11.6: >setting latency timer to 64
679 [   16.784263] snd_via82xx_modem: probe of 0000:00:11.6 failed with error -13
680 [   16.786051] snd_via82xx 0000:00:11.5: >setting latency timer to 64
681 [   16.910618] sky2 0000:05:00.0: >eth3: enabling interface
682 [   16.910745] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
683 [   16.911346] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
684 [   19.951465] sky2 0000:05:00.0: >eth3: Link is up at 1000 Mbps, full duplex, flow control both
685 [   19.951521] IPv6: ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
686 [   22.255779] init: plymouth-stop pre-start process (1402) terminated with status 1
687 [   32.040079] end_request: I/O error, dev fd1, sector 0
688 [   32.732078] end_request: I/O error, dev fd0, sector 0
689 [   38.760081] end_request: I/O error, dev fd1, sector 0
690 [   44.792075] end_request: I/O error, dev fd0, sector 0